Re: [expert] Helium Setup hangs..
Hi! so i think my quantum fireball must be on the side of those "offenders".. :( after seeing the hpt controller known and compiled into kernel i tried to plug in the udma66 cable after installation - it hangs when hpt controller plugs into kernel.. well, have to wait till this is stable or buy a new hd.. think i will wait.. ;) thanks for your suggestions.. bye, Torben Civileme wrote: > LOTS of problems with Ultra66 controllers (Promise and Highpoint) > with *certain* drives. The extra constraints on deviations from > specs caused by Ultra66 and 586 code in combination has caused a > lot of out of spec drive/chipset combos to fall over. WD seems > to be the primary offender followed by Maxtor, Seagate and > Quantum(Bigfoot) in roughly that order, and the Intel 810, TX > Chipsets and VIA MVP4 seem to be the most vulnerable on the Mobo > side. This data is small numbers from this list and people who > emailed me privately, but of which I have nevertheless been > tracking since February when I duplicated a "lost interrupt" > someone else was reporting by trying various hardware > combinations, and someone turned me on to http://kt.linuxcare.com > to track some hardware problems that were becoming apparent. > > Still, by my count, more than 90% of the HPT and Promise combos > seem to work right out of the box with 7.1. > > Civileme
Re: [expert] Helium Setup hangs..
Hi! Thanks for the suggestion, tried it but still hangs.. Dunno, if I was wrong before with hanging on ide-scsi, but now it hangs on SCSI detection.. When I ran setup in expert mode it hangs after the kernel has set up ide-controller.. Anyone out there had similar probs with HPT 366? bye, Torben Civileme wrote: > Yes, skip the ide-scsi detection (install in expert > mode). > > If it loads ide-scsi because you have a burner > somewhere, try this crazy trick. > > Install burner as slave, then switch it to master for > running. > > CIvileme
[expert] Helium Setup hangs..
Hi! I tried to install Helium with UDMA 66 and it hangs on ide-scsi detection in setup.. Thought that the HPT366 on BP6 is a tested setup from Mandrake-Developers as i have seen here before.. Has anyone successfully made a setup with HPT366 on Helium? My Harddisk is a Quantum Fireball, so not one of those WD which have problems that I've read here.. Bye, Torben
Re: [expert] UDMA66 problem
Hi! Anyone has successful installed UDMA 66 with 7.1 and HPT366 on his BP6? My problem starts when installer makes ide-scsi detection it hangs.. any workaround to disable detecting? (export mode doesn`t work..) bye, Torben
Re: [expert] PHP on Air
Hi! Thanks all for the suggestions, works fine after naming files which should be parsed php3.. Also thanks for the security tip, which shouldnt left out.. ;) Bye, Torben
Re: [expert] PHP on Air
Hi Jean-Michel! Thanks for your hint. With naming those files whatever.php3 it worked.. So i have to add something to parse also html-files, sorry, thought that this is the standard situation. But now i got it.. Bye, Torben Jean-Michel Dault wrote: > > On Sat, 4 Mar 2000, Bug Hunter wrote: > > > You may have a bit more reading to do. Apache has to know to associate > > the web pages produced with the php parser. you have to edit the > > /etc/httpd.conf files. I forget exactly what you put there. If you visit > > http://www.php.net, and look for their searchable FAQ, it will probably > > put you on the right track. Some others have had problems similar to > > yours, and the answers are provided by users that solved the problems. > > The Mandrake Apache and PHP3 are already pre-configured. All you have to > do is name your file whatever.php3 and it should work. > > If it doesn't... > > > > Also, did you restart your server after changing the config files? If > > not, it doesn't work. (experience speaking :)) > > Yup, you have to restart Apache =) /etc/rc.d/init.d/apache restart > > Also, make sure your web server has the permissions to read your php3 > files. (chmod 0755 file). > > Jean-Michel Dault > [EMAIL PROTECTED]
Re: [expert] PHP on Air
Hi! I think the conf-files from Apache and PHP are already configured from Mandrake, looked at them and it looks like everything is fine.. Anyone got a hint? Or should i fetch new RPMs from AdvancedExtranet? Bye, Torben Bug Hunter wrote: > > You may have a bit more reading to do. Apache has to know to associate > the web pages produced with the php parser. you have to edit the > /etc/httpd.conf files. I forget exactly what you put there. If you visit > http://www.php.net, and look for their searchable FAQ, it will probably > put you on the right track. Some others have had problems similar to > yours, and the answers are provided by users that solved the problems. > > Also, did you restart your server after changing the config files? If > not, it doesn't work. (experience speaking :))
[expert] PHP on Air
Hi! Anyone had problems with PHP on Air? Got installed Apache and all PHP packages - running well, but also little examples wont execute.. Looks like nothing is parsed from Apache, must i configure Apache to parse PHP? Bye, Torben
Re: [expert] nfs & rpc question: "Program not registered"
Hi! > The error message I now get is: > > root@charlesc # mount /mnt/server/ > mount: RPC: Program not registered hmm, i get the same message after updating my server to MDK 7.0, before it worked great, anyone knows where the probliem lies? bye, Torben
Re: [expert] Kernel naming
Warren Doney wrote: > Set when you "make modules install" > You get the error because your new > /lib/modules/foo has the same number as > the old one - thats why you must change > the name *before* you compile a kernel. > You must compile your kernel again. yeah, that works.. tried this yesterday, before that i just followed a hint on mandrakeuser.org which says to change the makefile and only make new modules.. perhaps this should be mentioned there.. bye, Torben
Re: [expert] Kernel naming
Hi! > The running kernel is set at boot - edit lilo with klilo > before you recompile your kernel > mv /lib/modules/2.2.1X-foo /lib/modules/2.2.1X-foo.ba hmm, thats all clear and no problem.. klilo? hmm, i like vi /etc/lilo.conf.. ;) > you say: " I received some problems after building and > inserting a module into the kernel.." > > What were they (copy the error messages)? i received unresolved symbols, because my module dir still pointed to the old version no. can anyone give me a hint where the module dir is being set? i tried EXTRAVERSION in Makefile but didnt help.. bye, Torben
[expert] Kernel naming
Hi! Got a question after building my own kernel. MDK installed a normal and a SMP Kernel for my BP6. There are two dirs in /lib/modules something like /2.2.14-15mdk + /2.2.14-15mdksmp, also after building my own kernel there are only those 2, my startup screen shows 2.2.-14-15mdksmp from any system variable i think. My question is where is this one set? I received some problems after building and inserting a module into the kernel.. So i want to change this naming context and have only one module directory.. Anyone can help me? ;) Another problem is that i receive a lot of unresolved symbols after booting my new kernel.. Ah, btw, MDK is 7.0.. Thanks in advance, bye, Torben
Re: [expert] xawtv
Hi Svante, Svante Signell wrote: > xawtv: > This is xawtv-3.03, running on Linux/i686 (2.2.13-22mdk) > visual: id=0x22 class=4 (TrueColor), depth=16 > x11: 1280x1024, 16 bit/pixel, 2560 byte/scanline, DGA, VidMode > waitpid: No child processes > waitpid: No child processes > v4l: 1280x1024, 16 bit/pixel, 2560 byte/scanline > WARNING: v4l and dga disagree about the framebuffer base > WARNING: Is v4l-conf installed correctly? > ov_fbuf.base=(nil), base=0x4200 > WARNING: overlay mode disabled > wmhooks: kde This looks like v4l-conf which xawtv runs isn't in your path and so cant be executed.. Bye, Torben
Re: [expert] NFS / root access
Hi Denis, > I have "amd" running with default automount map, i.e. ls /net/MACHINE_NAME > automatically mounts all the directories which are exported from this > machine. If I try it as a root, though it does not work, unles it has been > allready automounted (by a non-priviledged user). I do not mind this, but > it is a kind of surprising, since this was not the way NFS behaved before > I installed M6.1. Sounds good, so root can't get root on the server too. But what is the best way to mount some /export dirs from the server via NFS? Read NFS Howto already but gives no solution for me.. ;) You use automount? Are there Howtos for this? Haven't found a man page for this on my system. Is it an extra package and what is it called? Bye, Torben
[expert] NFS / root access
Hi! Connected my 2 linux boxes to build a small network. Everythings works, besides that i can't login as root via telnet or rlogin, only normal user logins are working.. If I want to mount a NFS directory as root i receive a Permission Denied, sounds like the same problem.. But what is the solution? ;) Don't want to setup a NIS for this little Network, must I? Thanks in advance, bye Torben