Re: [expert] can't recognize UMAX-VistaS6 on AHA1520b
On Thu, 13 Jul 2000, you wrote: > My Mandrake 7.02 can't recognize my Umax Vista-S6 scanner wich is hosted by > a Adaptec aha1520b scsi card. This card works well and is recognized trough > its bios (My CD-burner is found) > - sg driver (generic scsi driver) is installed V.2136 > - My scanner is in ready mode when the sytem boots > - scsi chain : terminator (by scsi card' bios) -cd-burner - computer - > scanner terminator (by scsi card's bios) > AHHHI think I know the problem -- you need to tell the SCSI BIOS *not* to terminate. Since it's in the MIDDLE of the SCSI chain (with your scanner being on the outside) you're blocking acces to the SCANNER by terminating at the card. John
Re: [expert] can't recognize UMAX-VistaS6 on AHA1520b
The first thing I would ask is what SCSI addresses the respective devices are set for. The second thing I would ask is, "What happens when your CD-R is not in the chain?" Civileme On Thu, 13 Jul 2000, you wrote: > My Mandrake 7.02 can't recognize my Umax Vista-S6 scanner wich is hosted by > a Adaptec aha1520b scsi card. This card works well and is recognized trough > its bios (My CD-burner is found) > - sg driver (generic scsi driver) is installed V.2136 > - My scanner is in ready mode when the sytem boots > - scsi chain : terminator (by scsi card' bios) -cd-burner - computer - > scanner terminator (by scsi card's bios) > > -cat /proc/scsi/scsi: > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: YAMAHA Model: CRW6416S Rev: 1.0c > Type: CD-ROM ANSI SCSI revision: 02 > > - cat /proc/devices > Character devices: > 1 mem > 2 pty > 3 ttyp > 4 ttyS > 5 cua > 7 vcs > 10 misc > 14 sound > 21 sg > 36 netlink > 128 ptm > 136 pts > 162 raw > > Block devices: > 1 ramdisk > 2 fd > 3 ide0 > 9 md > 11 sr > 22 ide1 > > - dmesg > > Linux version 2.2.14-15mdk ([EMAIL PROTECTED]) (gcc version > 2.95.2 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000 > [...] > scsi : 0 hosts. > scsi : detected total. > [...] > aha152x: BIOS test: passed, detected 1 controller(s) > aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, > parity=enabled, synchronous=disabled, delay=100, extended > translation=disabled > aha152x: trying software interrupt, ok. > scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ > scsi : 1 host. > Vendor: YAMAHAModel: CRW6416S Rev: 1.0c > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray > > - find-scanner > find-scanner: searching for scanners: > find-scanner: checking /dev/scanner... failed to open > find-scanner: checking /dev/sg0... open ok > find-scanner: found CD-drive "YAMAHA CRW6416S 1.0c" at device /dev/sg0 > find-scanner: checking /dev/sg1... failed to open > find-scanner: checking /dev/sg2... failed to open > find-scanner: checking /dev/sg3... failed to open > find-scanner: checking /dev/sg4... failed to open > find-scanner: checking /dev/sg5... failed to open > find-scanner: checking /dev/sg6... failed to open > find-scanner: checking /dev/sg7... failed to open > find-scanner: checking /dev/sg8... failed to open > find-scanner: checking /dev/sg9... failed to open > find-scanner: checking /dev/sga... open ok > find-scanner: found CD-drive "YAMAHA CRW6416S 1.0c" at device /dev/sga > find-scanner: checking /dev/sgb... failed to open > find-scanner: checking /dev/sgc... failed to open > find-scanner: checking /dev/sgd... failed to open > find-scanner: checking /dev/sge... failed to open > find-scanner: checking /dev/sgf... failed to open > find-scanner: checking /dev/sgg... failed to open > find-scanner: checking /dev/sgh... failed to open > find-scanner: checking /dev/sgi... failed to open > find-scanner: checking /dev/sgj... failed to open > find-scanner: checking /dev/sgk... failed to open > find-scanner: checking /dev/sgl... failed to open > find-scanner: checking /dev/sgm... failed to open > find-scanner: checking /dev/sgn... failed to open > find-scanner: checking /dev/sgo... failed to open > find-scanner: checking /dev/sgp... failed to open > find-scanner: checking /dev/sgq... failed to open > find-scanner: checking /dev/sgr... failed to open > find-scanner: checking /dev/sgs... failed to open > find-scanner: checking /dev/sgt... failed to open > find-scanner: checking /dev/sgu... failed to open > find-scanner: checking /dev/sgv... failed to open > find-scanner: checking /dev/sgw... failed to open > find-scanner: checking /dev/sgx... failed to open > find-scanner: checking /dev/sgy... failed to open > find-scanner: checking /dev/sgz... failed to open > find-scanner: done > > Thanks for any help > > Didier > > > __ > message envoye depuis http://www.ifrance.com > emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums > Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
[expert] can't recognize UMAX-VistaS6 on AHA1520b
My Mandrake 7.02 can't recognize my Umax Vista-S6 scanner wich is hosted by a Adaptec aha1520b scsi card. This card works well and is recognized trough its bios (My CD-burner is found) - sg driver (generic scsi driver) is installed V.2136 - My scanner is in ready mode when the sytem boots - scsi chain : terminator (by scsi card' bios) -cd-burner - computer - scanner terminator (by scsi card's bios) -cat /proc/scsi/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: YAMAHA Model: CRW6416S Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 - cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 14 sound 21 sg 36 netlink 128 ptm 136 pts 162 raw Block devices: 1 ramdisk 2 fd 3 ide0 9 md 11 sr 22 ide1 - dmesg Linux version 2.2.14-15mdk ([EMAIL PROTECTED]) (gcc version 2.95.2 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000 [...] scsi : 0 hosts. scsi : detected total. [...] aha152x: BIOS test: passed, detected 1 controller(s) aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi : 1 host. Vendor: YAMAHAModel: CRW6416S Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray - find-scanner find-scanner: searching for scanners: find-scanner: checking /dev/scanner... failed to open find-scanner: checking /dev/sg0... open ok find-scanner: found CD-drive "YAMAHA CRW6416S 1.0c" at device /dev/sg0 find-scanner: checking /dev/sg1... failed to open find-scanner: checking /dev/sg2... failed to open find-scanner: checking /dev/sg3... failed to open find-scanner: checking /dev/sg4... failed to open find-scanner: checking /dev/sg5... failed to open find-scanner: checking /dev/sg6... failed to open find-scanner: checking /dev/sg7... failed to open find-scanner: checking /dev/sg8... failed to open find-scanner: checking /dev/sg9... failed to open find-scanner: checking /dev/sga... open ok find-scanner: found CD-drive "YAMAHA CRW6416S 1.0c" at device /dev/sga find-scanner: checking /dev/sgb... failed to open find-scanner: checking /dev/sgc... failed to open find-scanner: checking /dev/sgd... failed to open find-scanner: checking /dev/sge... failed to open find-scanner: checking /dev/sgf... failed to open find-scanner: checking /dev/sgg... failed to open find-scanner: checking /dev/sgh... failed to open find-scanner: checking /dev/sgi... failed to open find-scanner: checking /dev/sgj... failed to open find-scanner: checking /dev/sgk... failed to open find-scanner: checking /dev/sgl... failed to open find-scanner: checking /dev/sgm... failed to open find-scanner: checking /dev/sgn... failed to open find-scanner: checking /dev/sgo... failed to open find-scanner: checking /dev/sgp... failed to open find-scanner: checking /dev/sgq... failed to open find-scanner: checking /dev/sgr... failed to open find-scanner: checking /dev/sgs... failed to open find-scanner: checking /dev/sgt... failed to open find-scanner: checking /dev/sgu... failed to open find-scanner: checking /dev/sgv... failed to open find-scanner: checking /dev/sgw... failed to open find-scanner: checking /dev/sgx... failed to open find-scanner: checking /dev/sgy... failed to open find-scanner: checking /dev/sgz... failed to open find-scanner: done Thanks for any help Didier __ message envoye depuis http://www.ifrance.com emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
