[expert] IDE CD-burner randomly fails to initialize
Hi, My Mandrake 9.0 works fine, apart from a small problem. I have an IDE CD burner (Yamaha CRW 3200 E) that sometimes doesn't initialize properly. Symptoms follow : - when I start Gnome, it freezes during 30 seconds to 1 minute before actually launching the desktop (apparently Nautilus depends on accessing "supermounted" devices) - in /var/log/messages, the following message is displayed a number of times : SCSI host 0 abort (pid 20) timed out - resetting SCSI bus is being reset for host 0 channel 0. scsi : aborting command due to timeout : pid 20, scsi0, channel 0, id 2, lun 0 Mode Sense 00 2a 00 80 00 After some of this repeted weirdness comes a final : ide1: reset timed-out, status=0x90 sr0: scsi3-mmc drive: 0x/0x caddy - afterwards, the burner isn't accessible : I can't mount it, neither can I burn CDs with it. At other times, it works fine from the start. I've tried removing supermount but that doesn't help : it still randomly refuses to initialize. Moreover my CD-ROM drive is ok. Thus it seems to me the problem is (at least partly) with the "ide-scsi" emulation. Of course, if I remove "ide-scsi", I won't be able to burn CDs... Just a bit more puzzling : I've never had this problem under Windows ;-( Did anybody experience the same problem ? Is there a known fix ? Regards Antoine. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
Es Dimecres 05 Setembre 2001 07:44, en Fedneg va escriure: > I've a 2nd CDROM how can I make both SCSI emulated? In /etc/lilo.conf: append=" hdc=ide-scsi hdd=ide-scsi" And then /dev/cdrom has to point to /dev/scd0, /dev/cdrom2 to /dev/scd1 and so on... -- Joan Tur. Ibiza - Spain [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395 Joan.Tur.pagina.de www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
is it a cdrom, or cd-rw On Wednesday 05 September 2001 10:48, jipe wrote: > Fedneg wrote: > >I've a 2nd CDROM how can I make both SCSI emulated? > > why for? Content-Type: text/plain; charset="iso-8859-15"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
Fedneg wrote: >I've a 2nd CDROM how can I make both SCSI emulated? > > > > why for? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
I've a 2nd CDROM how can I make both SCSI emulated? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
Sorry, your right. I always get that backwards! On Tue, 4 Sep 2001, jipe wrote: > > > Hoyt wrote: > > >On Tuesday 04 September 2001 11:56 am, Arthur H. Johnson II methodically > >organized electrons to state: > > > >>If your device for the CDRW is, say, hdc, then add the following to your > >>append line in /etc/lilo.conf: > >> > >>ide-scsi=hdc > >> > >>Reboot, then run "cdrecord -scanbus" to see if it sees your burner. > >> > > > >I thought it was > > > >hdc=ide-scsi > > > > > >Hoyt > > > for graphical startup > append=" hdc=ide-scsi quiet" > > bye > jipe > > > -- Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
Hoyt wrote: >On Tuesday 04 September 2001 11:56 am, Arthur H. Johnson II methodically >organized electrons to state: > >>If your device for the CDRW is, say, hdc, then add the following to your >>append line in /etc/lilo.conf: >> >>ide-scsi=hdc >> >>Reboot, then run "cdrecord -scanbus" to see if it sees your burner. >> > >I thought it was > >hdc=ide-scsi > > >Hoyt > for graphical startup append=" hdc=ide-scsi quiet" bye jipe Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
On Tuesday 04 September 2001 11:56 am, Arthur H. Johnson II methodically organized electrons to state: > If your device for the CDRW is, say, hdc, then add the following to your > append line in /etc/lilo.conf: > > ide-scsi=hdc > > Reboot, then run "cdrecord -scanbus" to see if it sees your burner. > I thought it was hdc=ide-scsi Hoyt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
If your device for the CDRW is, say, hdc, then add the following to your append line in /etc/lilo.conf: ide-scsi=hdc Reboot, then run "cdrecord -scanbus" to see if it sees your burner. Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu On Sat, 1 Sep 2001 [EMAIL PROTECTED] wrote: > This is a multi-part message in MIME format... > > =_999355132-7607-619 > Content-Type: text/plain; charset=iso-8859-1 > > ok my delema is i have a cd burner that is connected via pcmcia card and it >registers as a ide adapter, is there any way i can use it as linux has programs that >only use scsi based cd burners. > > also another isue is no matter which file tool i use like nautilus or such if i go >to the directory /mnt the program freezes unless i brows via typing it in address bar >and click on the memorized shortcuts that scroll up > > > =_999355132-7607-619 > Content-Type: text/plain; name="message.footer" > Content-Disposition: inline; filename="message.footer" > Content-Transfer-Encoding: 8bit > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > > =_999355132-7607-619-- > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
[EMAIL PROTECTED] wrote: > > ok my delema is i have a cd burner that is connected via pcmcia card and it >registers as a ide adapter, is there any way i can use it as linux has programs that >only use scsi based cd burners. Check out ide-scsi... should work over PCMCIA; but don't hold me to it :^). Burning a CD right now to my ide-CDR. Pierre Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] ide cd burner
ok my delema is i have a cd burner that is connected via pcmcia card and it registers as a ide adapter, is there any way i can use it as linux has programs that only use scsi based cd burners. also another isue is no matter which file tool i use like nautilus or such if i go to the directory /mnt the program freezes unless i brows via typing it in address bar and click on the memorized shortcuts that scroll up Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com