Re: [expert] Ethernet Problem
Bill Mullen wrote: On Fri, 14 Nov 2003, Sven L. wrote: I am using MD 9.1 on my laptop with an static ip adress on eth0. Ifplugd deletes the ip adress of eth0 if the cable is unplugged and this is the reason for an jboss error. I need a real static ip adress on eth0. All ideas are apreciated. You could try adding this line to (or editing the existing line in, as appropriate) your /etc/sysconfig/network-scripts/ifcfg-eth0 file: MII_NOT_SUPPORTED=yes Then restart the network service (service network restart at a root prompt). IIUIC, this will disable the NIC's ability to report that the cable is unplugged, which should keep ifplugd from reacting. Hopefully. :) HTH! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com It works thank you!!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Ethernet Problem
On Fri, 14 Nov 2003, Sven L. wrote: I am using MD 9.1 on my laptop with an static ip adress on eth0. Ifplugd deletes the ip adress of eth0 if the cable is unplugged and this is the reason for an jboss error. I need a real static ip adress on eth0. All ideas are apreciated. You could try adding this line to (or editing the existing line in, as appropriate) your /etc/sysconfig/network-scripts/ifcfg-eth0 file: MII_NOT_SUPPORTED=yes Then restart the network service (service network restart at a root prompt). IIUIC, this will disable the NIC's ability to report that the cable is unplugged, which should keep ifplugd from reacting. Hopefully. :) HTH! -- Bill Mullen [EMAIL PROTECTED] MA, USA RLU #270075 MDK 8.1 9.0 In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. - Douglas Adams Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Ethernet problem
On Wed, May 17, 2000 at 07:14:33PM +, Jim Hodgers wrote: - I have been using Suse (5.1, 6.1 and 6.3) and decided to see what all the - hype about Mandrake was. I like what I see with one exception. With Suse my - ethernet card was always auto-configured and just was there. Mandrake - refuses to mount the card. When I run insmod I get the following: - - [root@localhost jim]# insmod wd - /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_open - /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ethdev_init - /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_interrupt - /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol NS8390_init - /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_close - - - computer is an AMD K6-2 350 with Azus MB and 64M ram running Masndrake 7.0 - ethercard is an old Western Digital 8013 16 bit ISA (I have a coax network - and it would be very hard to change) - - If I swap cards with one of my Windoze machines it works in the Windows - box, but the replacement that is put in the Linux box does the same thing - (all are WD8013 cards) - - A friend offered some TrendNet cards but I can't find drivers for them. - - Am I missing something in the kernal? You are probably missing another module that wd depends on. Try instead: modprobe wd -- -- C^2 No windows were crashed in the making of this email. Looking for fine software and/or web pages? http://w3.trib.com/~ccurley
Re: [expert] Ethernet problem
On Wed, 17 May 2000, you wrote: I have been using Suse (5.1, 6.1 and 6.3) and decided to see what all the hype about Mandrake was. I like what I see with one exception. With Suse my ethernet card was always auto-configured and just was there. Mandrake refuses to mount the card. When I run insmod I get the following: Try modprobe instead of insmod. John
Re: [expert] Ethernet problem
Jim Hodgers wrote: I have been using Suse (5.1, 6.1 and 6.3) and decided to see what all the hype about Mandrake was. I like what I see with one exception. With Suse my ethernet card was always auto-configured and just was there. Mandrake refuses to mount the card. When I run insmod I get the following: [root@localhost jim]# insmod wd /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_open /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ethdev_init /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_interrupt /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol NS8390_init /lib/modules/2.2.14-15mdk/net/wd.o: unresolved symbol ei_close computer is an AMD K6-2 350 with Azus MB and 64M ram running Masndrake 7.0 ethercard is an old Western Digital 8013 16 bit ISA (I have a coax network and it would be very hard to change) If I swap cards with one of my Windoze machines it works in the Windows box, but the replacement that is put in the Linux box does the same thing (all are WD8013 cards) A friend offered some TrendNet cards but I can't find drivers for them. Am I missing something in the kernal? Hi Jim! I think you're problem lies within the Kernel... Try to recompile the Kernel! Disable "Symbol on modules" in the Kernel, then recompile it! Do not forget to do a "make modules" and "make modules_install"! David.
