On 8.0 and 8.1 I had to put an option line specifying the base address
as 0x300 (the defaut) in modules.conf before either version would find
it. Problem is that the driver needs to be told what its parameters are
and does not seem to autoprobe for them. On 7.2 there was no such
problem. box is switched off right now so I cant check the syntax.
BillK
On Wed, 2001-12-05 at 05:26, Asheesh Laroia wrote:
/etc/init.d/pcmcia start
You *did* install the PCMCIA utilities, right? If you did, can you use
other PCMCIA cards?
If you've done both of these and tried a simple modprobe ne and
modprobe ne-pci, reply back.
-- Asheesh.
On Mon, 3 Dec 2001, Lee Roberts wrote:
Have you tried the vendor to see if they have Linux drivers?
At 12:51 PM 12/3/2001 +0100, Juan Ignacio García García wrote:
Hello, I have a NE2000 compatible ethernet pcmcia card.
HardDrake does not recognize my card.
With Suse 7.1 this card works OK (with IRQ=3 and IO=0x300-0x31f).
My card is an Arowana Pcmcia Ethernet LAN Card 10M.
Does anyone know what can I do to configure my card?
This message has been 'sanitized'. This means that potentially
dangerous content has been rewritten or removed. The following
log describes which actions were taken.
Sanitizer (start=1007501417):
Part (pos=2672):
SanitizeFile (filename=unnamed.txt, mimetype=TEXT/PLAIN):
Match (rule=2):
Enforced policy: accept
Part (pos=3493):
SanitizeFile (filename=message.footer, mimetype=text/plain):
Match (rule=default):
Enforced policy: defang
Replaced mime type with: application/DEFANGED-8542
Replaced file name with: message_footer.DEFANGED-8542
Total modifications so far: 1
Anomy 0.0.0 : Sanitizer.pm
$Id: Sanitizer.pm,v 1.32 2001/10/11 19:27:15 bre Exp $
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com