Re: Fedora 10 - no longer rawhide?
On 14/11/08 01:55, Rahul Sundaram wrote: > Preupgrade unlike upgrades via yum is more of a supported option. How much supported is that? -- Erik. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Region 2 DVD to Region 1 DVD
On Thu, Nov 13, 2008 at 15:58:47 -0800, Rich Emberson <[EMAIL PROTECTED]> wrote: > So, I've got a Region 2 DVD, a Region 1 DVD player, > Fedora 9, a SAMSUNG SH-S203N DVD+RW and some recordable DVDs. > What I want to do is create a Region 1 version of the Region > 2 DVD so that I can look at it using my Region 1 DVD > player. Usually stock rpc drives can change regions a limited amount of times. I am not sure if there is a linux tool to do this, but probably there is. You might consider looking for alternative firmware. You can make your drive region zero which should play any disk, but I think there are ways for the DVD content providers to have this break menus to make the disk hard to use. You can also get firmware that resets the region change count every time you change it. When buying DVD drives, I think it is a good idea to check to see if flashing tools are available for Linux and if there are third party firmwares available to deal with region coding. You might also want the firmware to remove the speed limiting that both helps keep the drive quiet and limits how fast you can copy a DVD. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Yum stalling[SOLVED]
On Fri, 2008-11-14 at 15:19 +1100, Simon Slater wrote: > > On Fri, 2008-11-14 at 14:50 +1100, Simon Slater wrote: > > G'day, > > Yum seems to stall during Running Transaction Test for install, > > update > > and remove. I can't yum update yum. However rpm -e yum* reported that > > yum-utils is not installed, now rpm -Uvh > > yum-utils-1.1.14-4.fc8.noarch.rpm stalls. > > > > Where do I look to fix this? > > > Clearing out the rpm db and rebuilding didn't fix it. > > -- > Regards, > Simon Slater > Registered Linux User #463789. Be counted at: http://counter.li.org/ > > yum clean all. There must have been a bad rpm in /var/cache/yum. -- Hooroo, Simon Registered Linux User #463789. Be counted at: http://counter.li.org/ -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: spacewalk
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Laszlo BERES wrote: > Yes, since 0.1. For internal reasons we use only for RHEL channels, but > I'm planning to upgrade to 0.3 which can be used for multiple > organizations, so we will host RHEL and Fedora packages at the same time. > > Spacewalk is stable, we didn't have any serious problems yet. thanks for replying. have not read all of pages about it but from what i have read, it does look like what i am wanting. will see how it installs in scientific linux 5.4 and play with fedora and sl before i try it with rhel. thanks again. - -- peace out. tc,hago. g . in a free world without fences, who needs gates. learn linux: 'Rute User's Tutorial and Exposition' http://rute.2038bug.com/index.html.gz 'The Linux Documentation Project' http://www.tldp.org/ 'LDP HOWTO-index' http://www.tldp.org/HOWTO/HOWTO-INDEX/index.html 'HowtoForge' http://howtoforge.com/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Red Hat - http://enigmail.mozdev.org iD8DBQFJHSY0+C4Bj9Rkw/wRAgJsAKCDtypmrgPByoFjy+jdhIKST2aLzACeIctP 441eI4FuZrdENRtsQMYar+A= =5J95 -END PGP SIGNATURE- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
SMB Patch from Microsoft - Samba Shares?
Good morning, Microsoft has brought out a patch (MS08-068) for the SMB protocol. This patch, patches a flaw which is over 7 years old in the SMB of Windows. I have a Fedora 9 Samba server running and Windows XP / Vista Clients. Does anyone have any information as to possible problems applying this patch? Since the patch changes the way SMB authentification is checked / done, I am worried that my clients will not be able to reach their samba shares. regards Christian -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Correct way to get lirc module to load in F9?
I am running mythtv on my Fedora 9 workstation. What is the correct way to get the lirc module to load at boot on Fedora 9? I know I could shove a 'modprobe lirc-i2c' into the rc.local. I suspect there is a more "preferred" way to do it. Thanks! Andrew Robinson -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
Dave Feustel wrote: > Thanks for the info. I got rid of all my vcrs and tvs several years ago > after developing the opinion that "tv is a bad influence". Every so > often I sort of wish I could easily watch newsclips on Youtube, etc. Eh? You can watch YouTube using gnash. Matt Flaschen -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: How to get sound working in F9
Hi, Have you updated your FC9? What is your kernel version? run cmd: uname -a Try update your FC9 via cmd: yum -y update, then reboot the machine and test your sound. On Fri, Nov 14, 2008 at 4:56 AM, GN <[EMAIL PROTECTED]> wrote: > Mikkel L. Ellertson wrote: > >> GN wrote: >> >>> Hi Waleed, >>> >>> Sound card is Intel Corp 82801H (ICH Family) HD Audio Controller (Rev 03) >>> >>> /usr/bin/alsamixer gives 'No mixer elems found'. >>> >>> Also, clicking on the volume contrtol gives the following: >>> >>> The volume control did not find any elements and/or devices to control. >>> This means either that you don't have the right GStreamer plugins >>> installed, or that you don't have a sound card configured. >>> >>> You can remove the volume control from the panel by right-clicking the >>> speaker icon on the panel and selecting "Remove From Panel" from the >>> menu. >>> >>> I am not sure about the 82801H, but the 82801G can have problems if >> yours is not one of the ones that ALSA know the configuration of. >> You then need to specify a model in modprobe.conf to let the driver >> know what configuration to use. (The chip can be configured in many >> different ways, depending on how the manufacturer wants to use it.) >> >> To make things more interesting, the model that mostly works in one >> version of ALSA may not work in the next one. For example, this one >> used to work on my Toshibs A105-S4004: >> >> options snd-hda-intel index=0 single_cmd=1 model=ref >> >> In a later version, I had to use: >> >> options snd-hda-intel index=0 model=auto >> >> I still have to find the correct line for the current version when I >> have the spare time to do it. >> >> Mikkel >> >> Hi again Mikkel, > > I have no idea what I did but the attached error popped up on the screen. > Do you know what /dev/dsp is? > > Ta, > > GN > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: > http://fedoraproject.org/wiki/Communicate/MailingListGuidelines > -- --- Yours, Waleed Harbi If you want your goals to come true, don't sleep. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Yum stalling
On Fri, 2008-11-14 at 14:50 +1100, Simon Slater wrote: > G'day, > Yum seems to stall during Running Transaction Test for install, > update > and remove. I can't yum update yum. However rpm -e yum* reported that > yum-utils is not installed, now rpm -Uvh > yum-utils-1.1.14-4.fc8.noarch.rpm stalls. > > Where do I look to fix this? > Clearing out the rpm db and rebuilding didn't fix it. -- Regards, Simon Slater Registered Linux User #463789. Be counted at: http://counter.li.org/ -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Yum stalling
G'day, Yum seems to stall during Running Transaction Test for install, update and remove. I can't yum update yum. However rpm -e yum* reported that yum-utils is not installed, now rpm -Uvh yum-utils-1.1.14-4.fc8.noarch.rpm stalls. Where do I look to fix this? -- Regards, Simon Slater Registered Linux User #463789. Be counted at: http://counter.li.org/ -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: F9 to F10 without downloading an F10 iso image
Fred Silsbee wrote: using yum, will it be possible to go from F9 to F10 without downloading an F10 iso image and going through an update Yes, There is a preupgrade package that does just what you want. Fedora 9 will be getting an updated PackageKit that will automagically use preupgrade to upgrade you from Fedora 9 to Fedora 10. Watch for it soon, or use preupgrade by itself. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: F9 to F10 without downloading an F10 iso image
Fred Silsbee wrote: using yum, will it be possible to go from F9 to F10 without downloading an F10 iso image and going through an update Yes it sure is possible. I did it from F8 to F9 and I'm doing it right now from F9 to F10. (Started with 9.92 going up) -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
On Thu, Nov 13, 2008 at 09:49:46PM -0430, Patrick O'Callaghan wrote: > On Thu, 2008-11-13 at 20:13 -0500, Dave Feustel wrote: > > There is a new linux program for watching tv from worldwide sources. > > The program is available from livestation.com. It is a 77k line open > > source bourne shell script. Is there any reasonable way to check it out > > for exploits? > > The channel list doesn't seem to include anything you can't just watch > in your browser. > > Is this any better than Miro, which actually *is* free software. Thanks for the tip about miro. I installed it but get the following errors when I run miro --help: 2/home/daf}miro --help WARNING:root:gtcache.init: setlocale failed. setting locale to 'C' (miro.real:18896): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Traceback (most recent call last): File "/usr/bin/miro.real", line 27, in from miro import singleclick File "/usr/lib/python2.5/site-packages/miro/singleclick.py", line 50, in from miro import item File "/usr/lib/python2.5/site-packages/miro/item.py", line 77, in _charset = locale.getpreferredencoding() File "/usr/lib/python2.5/locale.py", line 512, in getpreferredencoding setlocale(LC_CTYPE, "") File "/usr/lib/python2.5/locale.py", line 476, in setlocale return _setlocale(category, locale) locale.Error: unsupported locale setting 2/home/daf} Is there additional setup I should be doing? Thanks. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
F9 to F10 without downloading an F10 iso image
using yum, will it be possible to go from F9 to F10 without downloading an F10 iso image and going through an update -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
On Thu, Nov 13, 2008 at 09:01:17PM -0500, Todd Zullinger wrote: > Dave Feustel wrote: > > There is a new linux program for watching tv from worldwide sources. > > The program is available from livestation.com. It is a 77k line open > > source bourne shell script. Is there any reasonable way to check it > > out for exploits? > > If it were a 77,000 line shell script, there would be nothing > reasonable about it. :) > > It's not actually such a beast. It is a shell script that extracts > the binary files and installs them. And it does not appear to be open > source, so the answer to your question is: no, there is no reasonable > way to check this software for exploits. The license agreement also > has the standard proprietary boilerplate that states you may not > reverse engineer, decompile, etc., the software. > > I wouldn't bother with it. But then, I don't bother much with TV in > the first place. ;) > > -- > ToddOpenPGP -> KeyID: 0xBEAF0CE3 | URL: www.pobox.com/~tmz/pgp Thanks for the info. I got rid of all my vcrs and tvs several years ago after developing the opinion that "tv is a bad influence". Every so often I sort of wish I could easily watch newsclips on Youtube, etc. using F9. But so far internet talk radio on Republic Broadcasting and Genesis Live have sufficed for me. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
On Thu, 2008-11-13 at 20:13 -0500, Dave Feustel wrote: > There is a new linux program for watching tv from worldwide sources. > The program is available from livestation.com. It is a 77k line open > source bourne shell script. Is there any reasonable way to check it out > for exploits? The channel list doesn't seem to include anything you can't just watch in your browser. Is this any better than Miro, which actually *is* free software. poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
On Thu, 2008-11-13 at 21:01 -0500, Todd Zullinger wrote: > Dave Feustel wrote: > > There is a new linux program for watching tv from worldwide sources. > > The program is available from livestation.com. It is a 77k line open > > source bourne shell script. Is there any reasonable way to check it > > out for exploits? > > If it were a 77,000 line shell script, there would be nothing > reasonable about it. :) > > It's not actually such a beast. It is a shell script that extracts > the binary files and installs them. And it does not appear to be open > source, so the answer to your question is: no, there is no reasonable > way to check this software for exploits. The license agreement also > has the standard proprietary boilerplate that states you may not > reverse engineer, decompile, etc., the software. > > I wouldn't bother with it. But then, I don't bother much with TV in > the first place. ;) Maybe run it inside a VM? poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Region 2 DVD to Region 1 DVD
On Fri, 2008-11-14 at 09:27 +0800, Ed Greshko wrote: > > Or run one of the DVD cloning apps under Wine (sometimes works) or > under > > VMware or VirtualBox (should always work if properly configured). > > > FWIW, I use DVD Shrink under wine to create "region free" disks. > Works > great...especially when the original is a 9GB DVD. Ditto, except when it decides not to recognize my DVD drive. Reliability seems to vary with each update to Wine. poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Livestation.com - worldwide internet tv for fedora
Dave Feustel wrote: > There is a new linux program for watching tv from worldwide sources. > The program is available from livestation.com. It is a 77k line open > source bourne shell script. Is there any reasonable way to check it > out for exploits? If it were a 77,000 line shell script, there would be nothing reasonable about it. :) It's not actually such a beast. It is a shell script that extracts the binary files and installs them. And it does not appear to be open source, so the answer to your question is: no, there is no reasonable way to check this software for exploits. The license agreement also has the standard proprietary boilerplate that states you may not reverse engineer, decompile, etc., the software. I wouldn't bother with it. But then, I don't bother much with TV in the first place. ;) -- ToddOpenPGP -> KeyID: 0xBEAF0CE3 | URL: www.pobox.com/~tmz/pgp ~~ The power of accurate observation is frequently called cynicism by those who don't have it. -- George Bernard Shaw pgpdardW2M1YG.pgp Description: PGP signature -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: How to get sound working in F9
Mikkel L. Ellertson wrote: GN wrote: Hi Waleed, Sound card is Intel Corp 82801H (ICH Family) HD Audio Controller (Rev 03) /usr/bin/alsamixer gives 'No mixer elems found'. Also, clicking on the volume contrtol gives the following: The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu. I am not sure about the 82801H, but the 82801G can have problems if yours is not one of the ones that ALSA know the configuration of. You then need to specify a model in modprobe.conf to let the driver know what configuration to use. (The chip can be configured in many different ways, depending on how the manufacturer wants to use it.) To make things more interesting, the model that mostly works in one version of ALSA may not work in the next one. For example, this one used to work on my Toshibs A105-S4004: options snd-hda-intel index=0 single_cmd=1 model=ref In a later version, I had to use: options snd-hda-intel index=0 model=auto I still have to find the correct line for the current version when I have the spare time to do it. Mikkel Hi again Mikkel, I have no idea what I did but the attached error popped up on the screen. Do you know what /dev/dsp is? Ta, GN <>-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Region 2 DVD to Region 1 DVD
Patrick O'Callaghan wrote: > On Thursday 13 November 2008 19:28:47 Rich Emberson wrote: > >> So, I've got a Region 2 DVD, a Region 1 DVD player, >> Fedora 9, a SAMSUNG SH-S203N DVD+RW and some recordable DVDs. >> What I want to do is create a Region 1 version of the Region >> 2 DVD so that I can look at it using my Region 1 DVD >> player. >> I do not need to look at the DVD using Fedora, just make a copy. >> Can this be done? >> Googling about one finds numerous Linux DVD tools, scripts, sites, >> suggestions, etc. - all well and good, but I'd like a complete >> solution and not a cobbled together set of utilities that may >> or not work depending of numerous factors (and you are on your own >> to figure out what is not working). >> >> I know this might be a tall order. I understand that Fedora is, in >> a sense, a testbed, but its what I've got installed (and I don't >> have Windows installed anywhere, so I am interested in a Linux >> only solution). >> > > Possibly the easiest solution is to convince your DVD player to play Region 2 > disks. Most modern players can do this if you ask them nicely (Google is your > friend) or even by default. Pay no attention to what it says on the box or > manual, which is often misleading, I presume for legal reasons. I have an LG > player which will play any region, NTSC or PAL and it just came that way. > > Failing that, you could try k9copy and cross your fingers. > > Or run one of the DVD cloning apps under Wine (sometimes works) or under > VMware or VirtualBox (should always work if properly configured). > FWIW, I use DVD Shrink under wine to create "region free" disks. Works great...especially when the original is a 9GB DVD. -- fortune: not found -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: How to get sound working in F9
Mikkel L. Ellertson wrote: GN wrote: Hi Waleed, Sound card is Intel Corp 82801H (ICH Family) HD Audio Controller (Rev 03) /usr/bin/alsamixer gives 'No mixer elems found'. Also, clicking on the volume contrtol gives the following: The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu. I am not sure about the 82801H, but the 82801G can have problems if yours is not one of the ones that ALSA know the configuration of. You then need to specify a model in modprobe.conf to let the driver know what configuration to use. (The chip can be configured in many different ways, depending on how the manufacturer wants to use it.) To make things more interesting, the model that mostly works in one version of ALSA may not work in the next one. For example, this one used to work on my Toshibs A105-S4004: options snd-hda-intel index=0 single_cmd=1 model=ref In a later version, I had to use: options snd-hda-intel index=0 model=auto I still have to find the correct line for the current version when I have the spare time to do it. Mikkel Thanks Mikkel, you have pointed me in the right direction. The sound controller is found. The following line is from /sbin/lspci 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) The output of /sbin/lsmod | grep snd shows that sound modules are loaded. Does the following make any sense to you? snd_hda_intel 336928 0 snd_seq_dummy 6660 0 snd_seq_oss30364 0 snd_seq_midi_event 9600 1 snd_seq_oss snd_seq48448 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 10124 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss42496 0 snd_mixer_oss 16768 1 snd_pcm_oss snd_pcm67076 2 snd_hda_intel,snd_pcm_oss snd_timer 21640 2 snd_seq,snd_pcm snd_page_alloc 11400 2 snd_hda_intel,snd_pcm snd_hwdep 10500 1 snd_hda_intel snd48312 10 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 9288 1 snd Do I have to start the sound server somehow or just put in the options as you suggest? Ta, GN -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Livestation.com - worldwide internet tv for fedora
There is a new linux program for watching tv from worldwide sources. The program is available from livestation.com. It is a 77k line open source bourne shell script. Is there any reasonable way to check it out for exploits? Thanks. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Region 2 DVD to Region 1 DVD
On Thursday 13 November 2008 19:28:47 Rich Emberson wrote: > So, I've got a Region 2 DVD, a Region 1 DVD player, > Fedora 9, a SAMSUNG SH-S203N DVD+RW and some recordable DVDs. > What I want to do is create a Region 1 version of the Region > 2 DVD so that I can look at it using my Region 1 DVD > player. > I do not need to look at the DVD using Fedora, just make a copy. > Can this be done? > Googling about one finds numerous Linux DVD tools, scripts, sites, > suggestions, etc. - all well and good, but I'd like a complete > solution and not a cobbled together set of utilities that may > or not work depending of numerous factors (and you are on your own > to figure out what is not working). > > I know this might be a tall order. I understand that Fedora is, in > a sense, a testbed, but its what I've got installed (and I don't > have Windows installed anywhere, so I am interested in a Linux > only solution). Possibly the easiest solution is to convince your DVD player to play Region 2 disks. Most modern players can do this if you ask them nicely (Google is your friend) or even by default. Pay no attention to what it says on the box or manual, which is often misleading, I presume for legal reasons. I have an LG player which will play any region, NTSC or PAL and it just came that way. Failing that, you could try k9copy and cross your fingers. Or run one of the DVD cloning apps under Wine (sometimes works) or under VMware or VirtualBox (should always work if properly configured). poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
Timothy Murphy wrote: I'm still not clear if preupgrade is actually relevant in my case. It isn't. It is only relevant for users upgrading from *another release*. You are already using rawhide and will automatically get updated to Fedora 10 so preupgrade isn't necessary or relevant in your case. https://fedoraproject.org/wiki/Upgrading_from_pre-release_to_final Rahul -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
Timothy Murphy wrote: Claude Jones wrote: I've read this thread, but still don't understand exactly what preupgrade does. How does it differ at present from "yum update" which seems to change /etc/fedora-release to "Fedora release 10 (Cambridge)"? a google of 'fedora preupgrade' yielded the following first hit http://fedoraproject.org/wiki/Features/PreUpgrade Where exactly does that document answer my query above? It does and others have provided you the answer you are asking for as well. If you have specific questions, you should ask that instead since it is not clear what you haven't understood. To summarize: Simply running yum update/upgrade on a system won't take you to the next release. You need to download fedora-release for the release you want to upgrade to or change your repositories manually and run yum update. This usually works but it isn't a "supported" option. Preupgrade provides a solution that looks overall very similar to a live upgrade. It downloads the all the package updates from the release you want to upgrade to (you can continue using your system meanwhile) and changes grub to boot Anaconda and Anaconda uses the packages downloaded by preupgrade to upgrade your system. Preupgrade unlike upgrades via yum is more of a supported option. Rahul -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
Patrick O'Callaghan wrote: >> > as root type: >> > yum install preupgrade >> > preupgrade >> I've read this thread, but still don't understand exactly >> what preupgrade does. >> How does it differ at present from "yum update" >> which seems to change /etc/fedora-release >> to "Fedora release 10 (Cambridge)"? > As I understand it, preupgrade analyzes your RPM database and downloads > the packages you're going to need in order to upgrade to the next > version. It doesn't install anything. The idea is to save you time when > you actually do the upgrade. Think of it as a prefetch. I'm still not clear if preupgrade is actually relevant in my case. I'm running F10-Snap3-i686-Live-KDE (updated). An update today changed /etc/fedora-release to "Fedora release 10 (Cambridge)". As far as I can see, this automatically makes any changes necessary to upgrade to Fedora-10, so it is not clear to me what more preupgrade would do. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
Claude Jones wrote: >> I've read this thread, but still don't understand exactly >> what preupgrade does. >> How does it differ at present from "yum update" >> which seems to change /etc/fedora-release >> to "Fedora release 10 (Cambridge)"? > > a google of 'fedora preupgrade' yielded the following first hit > http://fedoraproject.org/wiki/Features/PreUpgrade Where exactly does that document answer my query above? -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Region 2 DVD to Region 1 DVD
So, I've got a Region 2 DVD, a Region 1 DVD player, Fedora 9, a SAMSUNG SH-S203N DVD+RW and some recordable DVDs. What I want to do is create a Region 1 version of the Region 2 DVD so that I can look at it using my Region 1 DVD player. I do not need to look at the DVD using Fedora, just make a copy. Can this be done? Googling about one finds numerous Linux DVD tools, scripts, sites, suggestions, etc. - all well and good, but I'd like a complete solution and not a cobbled together set of utilities that may or not work depending of numerous factors (and you are on your own to figure out what is not working). I know this might be a tall order. I understand that Fedora is, in a sense, a testbed, but its what I've got installed (and I don't have Windows installed anywhere, so I am interested in a Linux only solution). Richard -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Access denied to share
G'day I have a share (/home) on box A, an external hard-drive attached to box B to which only root can write. I can mount A:/home on B and browse and open the files, but when (as root on B) attempting to copy files from the mounted share to the external drive I get the error: cp: cannot access ' /mnt/ipex/home/simon':Permission denied. I thought that no_root_squash on the share might allow it, but no. What have I missed? Thanks -- Regards, Simon Slater Registered Linux User #463789. Be counted at: http://counter.li.org/ -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: advice for data recovery
Todd Denniston wrote: > Dave Stevens wrote, On 11/10/2008 04:56 PM: >> Hello All, >> >> I am trying to recover .jpgs that were on a SATA drive that was >> formatted by mistake. No backup of course. Foremost has done a >> wonderful job of recovering several tens of thousands of files. >> Unfortunately many of them are either irrelevant (cached web >> fragments, etc.) or damaged. The most common type of damage is shown >> when trying to view them in Nautilus, when I get a message saying, >> "unsupported marker type." >> >> It seems about 30% - 40% of the files recovered are damaged in this way. >> > > Assuming that all the data is really there but you have extra on the > end, then you might be able to use convert to read the input and only > output picture data. > > identify might be able to help you sort images from not images, and > corruption. > >> They aren't my images and I am not able to gauge what is worthwhile or >> not but I would like to do some triage by only considering those of a >> certain minimum size (easy to do) and not damaged (no idea.) >> >> So does anyone know of a program I can use to only copy files that are >> not damaged? I can sort out the teenies, but don't see how to proceed >> after that. > > man ImageMagick > man identify > man convert > > > I wounder if Jpeg Rescue would help in this case? http://codesink.org/recover.html Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup! signature.asc Description: OpenPGP digital signature -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
small fonts after rebooting fedora 9
Hello everybody, My computer has not been rebooted for a couple of months. I restarted it on October 31st, and after the restart the fonts became tiny and with lot's of aliasing. I installed the OS in May and had the system rebooted many times since then. The Fedora automatic updates were enabled but I did not change any settings myself recently. Different applications responded in a different way. For example, the email list in Thunderbird looked almost the same but the the messages had the tiny font. XEmacs had the small fonts not only for the text but for menus as well. Rebooting again did not help. I also tried to change the dpi in Gnome's System->Preferences->Look and Feel->Apperance->Fonts->Detail. It fixed the fonts on the windows status bars only but not the text in the applications. I was able to make e-mails readable by changing the application font options. The fonts in terminal windows still look thin and a bit fuzzy but I can probably live with this. The most important issue remains: XEmacs has this "compressed" look. It seems to ignore overall system dpi settings. XEmacs 21.5 (beta28) was like this even before the reboot but XEmacs 21.4 (patch 21) used to look normal. This is a screen shot of the XEmacs window on top of a web page with normal text and menu font sizes: http://picasaweb.google.com/theothersimonian/XEmacsScreenshot#5263805198044387458 Removing "init.el" did not help. I could not find anything online. I posted the question on linuxquestions.org and on comp.emacs.xemacs with no results. Please help! I do all my work in XEmacs and it hurts to stare at the fonts for the whole day... Thank you! Roni. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: port mapping and lsof
gary artim wrote: On Thu, Nov 13, 2008 at 10:44 AM, Rick Stevens <[EMAIL PROTECTED]> wrote: gary artim wrote: Hi -- Periodically I get a connection between 2 host on port 1000. netstat, shown below, but lsof, when executed like -- /usr/sbin/lsof -i TCP:1000 -- shows nothing. If i execute -- /usr/sbin/lsof -i -nP I get nada, see below. Anyone know what or how I can establish what this connection is? I am running nfs between the two machines. Much thanks! -- Gary # netstat -nat Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp0 0 0.0.0.0:111 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:46774 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:34393 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6010 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6011 0.0.0.0:* LISTEN tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED ( ### the connection ### ) tcp0 0 127.0.0.1:25127.0.0.1:44486 TIME_WAIT tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED tcp0 0 :::22 :::* LISTEN tcp0 0 :::25 :::* LISTEN tcp0 0 ::1:6010:::* LISTEN tcp0 0 ::1:6011:::* LISTEN # /usr/sbin/lsof -i -nP COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME rpcbind1834 rpc6u IPv4 3898 UDP *:111 rpcbind1834 rpc7u IPv4 3902 UDP *:737 rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) ntpd 2190 ntp 16u IPv4 4988 UDP *:123 ntpd 2190 ntp 17u IPv6 4989 UDP *:123 ntpd 2190 ntp 18u IPv6 4993 UDP [fe80::218:f3ff:fef6:3378]:123 ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 ntpd 2190 ntp 20u IPv6 4995 UDP [fe80::218:f3ff:fef6:340e]:123 ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 (LISTEN) cupsd 2252 root6u IPv4 5254 UDP *:631 master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) smtp 29173 postfix 12u IPv4 473909 TCP xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) When that occurs, try "netstat -pn | grep :1000" and you should see which program is doing it. According to /etc/services, port 1000 is "cadlock2". Other sources say this may be caused by a trojan. -- - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - -- -We look for things. Things that make us go!- -- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines Hi Steve -- Ok, I figured it out. I did both a netstat -pnat and rpcinfo -p on both machines and the ports match to the nfs nlockmgr. (see below), thanks much for your help! -- Gary # netstat -pnat && /usr/sbin/rpcinfo -p Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1834/rpcbind tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2182/sshd tcp0 0 0.0.0.0:46774 0.0.0.0:* LISTEN - tcp0 0 127.
Re: advice for data recovery
Dave Stevens wrote, On 11/10/2008 04:56 PM: Hello All, I am trying to recover .jpgs that were on a SATA drive that was formatted by mistake. No backup of course. Foremost has done a wonderful job of recovering several tens of thousands of files. Unfortunately many of them are either irrelevant (cached web fragments, etc.) or damaged. The most common type of damage is shown when trying to view them in Nautilus, when I get a message saying, "unsupported marker type." It seems about 30% - 40% of the files recovered are damaged in this way. Assuming that all the data is really there but you have extra on the end, then you might be able to use convert to read the input and only output picture data. identify might be able to help you sort images from not images, and corruption. They aren't my images and I am not able to gauge what is worthwhile or not but I would like to do some triage by only considering those of a certain minimum size (easy to do) and not damaged (no idea.) So does anyone know of a program I can use to only copy files that are not damaged? I can sort out the teenies, but don't see how to proceed after that. man ImageMagick man identify man convert -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: port mapping and lsof
On Thu, Nov 13, 2008 at 10:44 AM, Rick Stevens <[EMAIL PROTECTED]> wrote: > gary artim wrote: >> >> Hi -- >> >> Periodically I get a connection between 2 host on port 1000. netstat, >> shown below, but lsof, when executed like -- >> >> /usr/sbin/lsof -i TCP:1000 >> >> -- shows nothing. If i execute -- >> >> /usr/sbin/lsof -i -nP >> >> I get nada, see below. Anyone know what or how I can establish what >> this connection is? I am running nfs between >> the two machines. Much thanks! >> >> -- Gary >> >> # netstat -nat >> Active Internet connections (servers and established) >> Proto Recv-Q Send-Q Local Address Foreign Address >> State >> tcp0 0 0.0.0.0:111 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:22 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:46774 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:631 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:25 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:34393 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:6010 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:6011 0.0.0.0:* >> LISTEN >> tcp0 0 192.168.1.2:1000192.168.1.1:59903 >> ESTABLISHED ( ### the connection ### ) >> tcp0 0 127.0.0.1:25127.0.0.1:44486 >> TIME_WAIT >> tcp0 0 192.168.1.2:991 192.168.1.1:2049 >> ESTABLISHED >> tcp0 0 :::22 :::* >> LISTEN >> tcp0 0 :::25 :::* >> LISTEN >> tcp0 0 ::1:6010:::* >> LISTEN >> tcp0 0 ::1:6011:::* >> LISTEN >> >> >> # /usr/sbin/lsof -i -nP >> COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME >> rpcbind1834 rpc6u IPv4 3898 UDP *:111 >> rpcbind1834 rpc7u IPv4 3902 UDP *:737 >> rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) >> rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 >> rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 >> rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) >> sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) >> sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) >> ntpd 2190 ntp 16u IPv4 4988 UDP *:123 >> ntpd 2190 ntp 17u IPv6 4989 UDP *:123 >> ntpd 2190 ntp 18u IPv6 4993 UDP >> [fe80::218:f3ff:fef6:3378]:123 >> ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 >> ntpd 2190 ntp 20u IPv6 4995 UDP >> [fe80::218:f3ff:fef6:340e]:123 >> ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 >> ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 >> ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 >> avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 >> avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 >> cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 >> (LISTEN) >> cupsd 2252 root6u IPv4 5254 UDP *:631 >> master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) >> master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) >> >> smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) >> smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) >> smtp 29173 postfix 12u IPv4 473909 TCP >> xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) >> > > When that occurs, try "netstat -pn | grep :1000" and you should see > which program is doing it. According to /etc/services, port 1000 > is "cadlock2". Other sources say this may be caused by a trojan. > -- > - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - > - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - > -- > -We look for things. Things that make us go!- > -- > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines > Hi Steve -- Ok, I figured it out. I did both a netstat -pnat and rpcinfo -p on both machines and the ports match to the nfs nlockmgr. (see below), thanks much for your help! -- Gary # netstat -pnat && /usr/sbin/rpcinfo -p Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp0
Re: port mapping and lsof
gary artim wrote: On Thu, Nov 13, 2008 at 10:44 AM, Rick Stevens <[EMAIL PROTECTED]> wrote: gary artim wrote: Hi -- Periodically I get a connection between 2 host on port 1000. netstat, shown below, but lsof, when executed like -- /usr/sbin/lsof -i TCP:1000 -- shows nothing. If i execute -- /usr/sbin/lsof -i -nP I get nada, see below. Anyone know what or how I can establish what this connection is? I am running nfs between the two machines. Much thanks! -- Gary # netstat -nat Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp0 0 0.0.0.0:111 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:46774 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:34393 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6010 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6011 0.0.0.0:* LISTEN tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED ( ### the connection ### ) tcp0 0 127.0.0.1:25127.0.0.1:44486 TIME_WAIT tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED tcp0 0 :::22 :::* LISTEN tcp0 0 :::25 :::* LISTEN tcp0 0 ::1:6010:::* LISTEN tcp0 0 ::1:6011:::* LISTEN # /usr/sbin/lsof -i -nP COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME rpcbind1834 rpc6u IPv4 3898 UDP *:111 rpcbind1834 rpc7u IPv4 3902 UDP *:737 rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) ntpd 2190 ntp 16u IPv4 4988 UDP *:123 ntpd 2190 ntp 17u IPv6 4989 UDP *:123 ntpd 2190 ntp 18u IPv6 4993 UDP [fe80::218:f3ff:fef6:3378]:123 ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 ntpd 2190 ntp 20u IPv6 4995 UDP [fe80::218:f3ff:fef6:340e]:123 ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 (LISTEN) cupsd 2252 root6u IPv4 5254 UDP *:631 master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) smtp 29173 postfix 12u IPv4 473909 TCP xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) When that occurs, try "netstat -pn | grep :1000" and you should see which program is doing it. According to /etc/services, port 1000 is "cadlock2". Other sources say this may be caused by a trojan. -- - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - -- -We look for things. Things that make us go!- -- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Thanks, I tried that (happened to notice the -p option) and get: tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED - tcp0 0 128.32.10.135:2275.37.17.46:1057 ESTABLISHED 29271/sshd: gartim tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED - no program listed. I also get it on 2049, an nfs port. Is it possibly an nfs connection? That's possible. You might try to capture a tcpdump of the traffic in a file and examine it to see what's going on. Something like: tcpdump -s 1500 -X tcp port 1000 >/tmp/tcpdump.txt which will do it in hex and ASCII and you can look at with an editor, or tcpdump -s 1500 -w /tmp
Re: Adjusting the KDE 4.1 panel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 kevin kempter wrote: > Can I set the KDE 4.1 panel to always be the width of the screen? i am still in f8/kde3 and here when i bring up 'control center', 'system settings' for kde4, there is a tab under 'desktop > panels' shown as 'arrangement'. within there is a selection 'length' where it can be set to 100% and a check box '[] expand as required to fit contents'. you may try looking for something similar in kde4. hth. - -- peace out. tc,hago. g . in a free world without fences, who needs gates. learn linux: 'Rute User's Tutorial and Exposition' http://rute.2038bug.com/index.html.gz 'The Linux Documentation Project' http://www.tldp.org/ 'LDP HOWTO-index' http://www.tldp.org/HOWTO/HOWTO-INDEX/index.html 'HowtoForge' http://howtoforge.com/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Red Hat - http://enigmail.mozdev.org iD8DBQFJHIL2+C4Bj9Rkw/wRAhh0AJ0VtD3ttHO9Oy/1PVZdMibZDEFjmwCeJBx6 x9/8w4oCxr6r2cUZhQfP+7k= =f6qb -END PGP SIGNATURE- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
trying to get eggdrop scripts working - fc9
Hi
I am trying to get some eggdrop tcl scripts working for my IRC server -
if i just use the included scripts from eggdrop then it starts fine but
as soon as i try to use scripts that use network connectivity etc then
it fails.
Running these manually using tclsh i get the following, does anyone have
any clues.
thanks
$ tclsh scripts/cellgen.tcl
invalid command name "bind"
while executing
"bind time - "00 00 01 % %" cell::clearcache"
(in namespace eval "::cell" script line 6)
invoked from within
"namespace eval ::cell {
set scriptversion 2.51
package require http 2.1
bind time - "00 00 01 % %" cell::clearcache
set erno [catch {
regs..."
(file "scripts/cellgen.tcl" line 116)
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Firefox off-line in core 9
I just put to about:config in the address bar and set toolkit.networkmanager.disable to true. German. -- Germán A. Racca Instituto Nacional de Pesquisas Espaciais - INPE Divisão de Astrofísica - DAS/CEA São José dos Campos - SP - Brasil -- TEL: 55 12 3945-7209 FAX: 55 12 3945-6811 -- http://funk.on.br/racca -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: port mapping and lsof
On Thu, Nov 13, 2008 at 10:44 AM, Rick Stevens <[EMAIL PROTECTED]> wrote: > gary artim wrote: >> >> Hi -- >> >> Periodically I get a connection between 2 host on port 1000. netstat, >> shown below, but lsof, when executed like -- >> >> /usr/sbin/lsof -i TCP:1000 >> >> -- shows nothing. If i execute -- >> >> /usr/sbin/lsof -i -nP >> >> I get nada, see below. Anyone know what or how I can establish what >> this connection is? I am running nfs between >> the two machines. Much thanks! >> >> -- Gary >> >> # netstat -nat >> Active Internet connections (servers and established) >> Proto Recv-Q Send-Q Local Address Foreign Address >> State >> tcp0 0 0.0.0.0:111 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:22 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:46774 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:631 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:25 0.0.0.0:* >> LISTEN >> tcp0 0 0.0.0.0:34393 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:6010 0.0.0.0:* >> LISTEN >> tcp0 0 127.0.0.1:6011 0.0.0.0:* >> LISTEN >> tcp0 0 192.168.1.2:1000192.168.1.1:59903 >> ESTABLISHED ( ### the connection ### ) >> tcp0 0 127.0.0.1:25127.0.0.1:44486 >> TIME_WAIT >> tcp0 0 192.168.1.2:991 192.168.1.1:2049 >> ESTABLISHED >> tcp0 0 :::22 :::* >> LISTEN >> tcp0 0 :::25 :::* >> LISTEN >> tcp0 0 ::1:6010:::* >> LISTEN >> tcp0 0 ::1:6011:::* >> LISTEN >> >> >> # /usr/sbin/lsof -i -nP >> COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME >> rpcbind1834 rpc6u IPv4 3898 UDP *:111 >> rpcbind1834 rpc7u IPv4 3902 UDP *:737 >> rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) >> rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 >> rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 >> rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) >> sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) >> sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) >> ntpd 2190 ntp 16u IPv4 4988 UDP *:123 >> ntpd 2190 ntp 17u IPv6 4989 UDP *:123 >> ntpd 2190 ntp 18u IPv6 4993 UDP >> [fe80::218:f3ff:fef6:3378]:123 >> ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 >> ntpd 2190 ntp 20u IPv6 4995 UDP >> [fe80::218:f3ff:fef6:340e]:123 >> ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 >> ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 >> ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 >> avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 >> avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 >> cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 >> (LISTEN) >> cupsd 2252 root6u IPv4 5254 UDP *:631 >> master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) >> master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) >> >> smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) >> smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) >> smtp 29173 postfix 12u IPv4 473909 TCP >> xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) >> > > When that occurs, try "netstat -pn | grep :1000" and you should see > which program is doing it. According to /etc/services, port 1000 > is "cadlock2". Other sources say this may be caused by a trojan. > -- > - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - > - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - > -- > -We look for things. Things that make us go!- > -- > > -- > fedora-list mailing list > fedora-list@redhat.com > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Thanks, I tried that (happened to notice the -p option) and get: tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED - tcp0 0 128.32.10.135:2275.37.17.46:1057 ESTABLISHED 29271/sshd: gartim tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED - no program listed. I also get it on 2049, an nfs port. Is it possibly an nfs connection? thanks, -- Gary -- fedora-list mailing li
Re: install Fedora 9 on Toshiba Satellite A305-S6825
On Wed, Nov 12, 2008 at 11:08 AM, bruce <[EMAIL PROTECTED]> wrote: > patrick... > > like clock work.. it seems email lists get into a > top/bottom/side/horizontal/diagonal posting conversation... > > good luck!!! > > oh.. was this top? i'm close to san fran!! Is not very wise to piss people off on the list. There is a saying that goes like this: "Be mindful of what toes you step on today, for they may be attached to the ass you may kiss tomorrow" > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: How to add packagekit to the Administration menu
- Original Message From: Richard Hughes <[EMAIL PROTECTED]> To: "Community assistance, encouragement, and advice for using Fedora." Sent: Thursday, November 13, 2008 10:26:19 AM Subject: Re: How to add packagekit to the Administration menu On Thu, 2008-11-13 at 05:40 -0800, Ajit Warrier wrote: > I removed packagekit because it kept popping up errors on my screen (I > know, I should have tried to fix that instead!) You want to try PackageKit in updates-testing. It's much never than 0.2.x. Also, you need to file bugs if you want something fixed. > But anyway, I have now reinstalled it. However, it is not part of the > Administration menu any more, nor does it pop up alerts when there are > updates available. I have switched back to yum for now, but I am > curious as to whether there is a way I can get this to work the way it > used to. Please help. That menu item is provided by gnome-packagekit, which depends on PackageKit. If I were you, I would enable updates-testing, and install PackageKit and gnome-packagekit and try it out again. Richard. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines I guess I have been spoilt by the Windows way of doing things - if at first it doesn't work, re-install and try again. Sorry. Installing PackageKit and gnome-packagekit from updates-testing seems to have done it. Thanks for your help. Ajit -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: port mapping and lsof
gary artim wrote: Hi -- Periodically I get a connection between 2 host on port 1000. netstat, shown below, but lsof, when executed like -- /usr/sbin/lsof -i TCP:1000 -- shows nothing. If i execute -- /usr/sbin/lsof -i -nP I get nada, see below. Anyone know what or how I can establish what this connection is? I am running nfs between the two machines. Much thanks! -- Gary # netstat -nat Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp0 0 0.0.0.0:111 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:46774 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:34393 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6010 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6011 0.0.0.0:* LISTEN tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED ( ### the connection ### ) tcp0 0 127.0.0.1:25127.0.0.1:44486 TIME_WAIT tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED tcp0 0 :::22 :::* LISTEN tcp0 0 :::25 :::* LISTEN tcp0 0 ::1:6010:::* LISTEN tcp0 0 ::1:6011:::* LISTEN # /usr/sbin/lsof -i -nP COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME rpcbind1834 rpc6u IPv4 3898 UDP *:111 rpcbind1834 rpc7u IPv4 3902 UDP *:737 rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) ntpd 2190 ntp 16u IPv4 4988 UDP *:123 ntpd 2190 ntp 17u IPv6 4989 UDP *:123 ntpd 2190 ntp 18u IPv6 4993 UDP [fe80::218:f3ff:fef6:3378]:123 ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 ntpd 2190 ntp 20u IPv6 4995 UDP [fe80::218:f3ff:fef6:340e]:123 ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 (LISTEN) cupsd 2252 root6u IPv4 5254 UDP *:631 master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) smtp 29173 postfix 12u IPv4 473909 TCP xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) When that occurs, try "netstat -pn | grep :1000" and you should see which program is doing it. According to /etc/services, port 1000 is "cadlock2". Other sources say this may be caused by a trojan. -- - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - -- -We look for things. Things that make us go!- -- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Is F9 Security an oxymoron?
Wolfgang S. Rupprecht wrote: Dave Feustel <[EMAIL PROTECTED]> writes: Would such a proxy cause Firefox and Konqueror to differ in their ability to retrieve URLs? Most of the URLs that Konqueror doesn't display are displayed immediately and with no problem when I start firefox from with konqueror. Sure. I'd say all bets are off once companies start playing games. Really, just look at the traffic. Open up two windows onto the data and compare both browsers transactions packet by packet. I'm sure you'll see differences. Compare a bunch of different failing web pages and I'm sure a pattern will emerge. -wolfgang With the different things ISP's are doing, including "Deep Packet Inspection" and ad insertion, anything is possible. Search and there are a few sites that you can use to check your connection for these factors. I don't have links handy. Search for detecting Deep Packet Inspection or something on that line. Bell Canada is known to do this on their networks. Konqueror may be showing the problem. -- Robin Laing -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: advice for data recovery
Dave Stevens wrote:
Hello All,
I am trying to recover .jpgs that were on a SATA drive that was formatted by
mistake. No backup of course. Foremost has done a wonderful job of recovering
several tens of thousands of files. Unfortunately many of them are either
irrelevant (cached web fragments, etc.) or damaged. The most common type of
damage is shown when trying to view them in Nautilus, when I get a message
saying, "unsupported marker type."
It seems about 30% - 40% of the files recovered are damaged in this way.
They aren't my images and I am not able to gauge what is worthwhile or not but
I would like to do some triage by only considering those of a certain minimum
size (easy to do) and not damaged (no idea.)
So does anyone know of a program I can use to only copy files that are not
damaged? I can sort out the teenies, but don't see how to proceed after that.
TIA.
Dave
My sympathies. I did the same thing. I did a backup but forgot one sub
folder. Shame on me.
In the recovery, I ended up with 180Gigs of recovered files to go
through. Not pleasant.
I have not found a program that can check and confirm the accuracy of
the recovered files as they are all listed as images if I type in
file {file name}
What I have done is use "GQview" and look at the thumbnails.
My procedure is/was this.
With all the recovered images, I wrote a short bash script to sort them
into smaller sub-directories. This cut the number of images down to 10K
or 20K per directory.
Next I opened the directory in GQview. With thumbnails turned on, this
takes minutes, depending on the size of the folder.
I then sort the directory by file size. This helps to eliminate smaller
files from having to be viewed. I guess I could write a script to rm
these files anyway. See later.
Now with the thumbnails, I can quickly scan the directory for images. I
will use the mouse to drag and drop the file in the parent directory.
When scanning, the scrolling slows/stops for real images over corrupted
files.
I know my images from my camera are larger than 2M each but the recovery
software would pull any images it can and thus I sometimes have
recovered a smaller version of the image where the full image is gone.
I still have over 100Gig to go through.
I now backup my photos to DVD as soon as I take them off the stick.
One note about recovery software. As I did this at home, I cannot
remember what program I used. But what I did find out was it didn't
look at the headers for the images from my camera. I needed to change
the header info in a configuration file. I did a test on a memory stick
to ensure I was looking at my images.
--
Robin Laing
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: install Fedora 9 on Toshiba Satellite A305-S6825
Tim wrote: What happens when you refuse to fit in: You piss off the regulars, the ones who use the list all the time, and provide the most help, and the most useful help. And your messages/problems get ignored by the regulars, who are most likely to have the answers to solve your problem, and see that the problem gets fixed for everyone else (you and they get guided to documentation, and to making bug reports, instead of just bitching). You might get an answer by some of the irregulars, who have a tendency to give you wrong and stupid instructions. Then you start a fight trying to change everyone else to suit you, and/or the MINORITY over to your MINORITY preferences. Of course you won't see that you're in the minority, because you've got your head too far up your ass. Let's try to keep this civil, shall we? It seems that at least once a month this bloody topic arises and starts another flame war. Bruce has a misguided concept of what we would like to see in the list. If I were to walk into a restaurant with a sign saying "No shirt, no shoes, no service" in my board shorts and DEMAND that I be served, I expect I'd be "asked to leave" by some rather large fellows whose shoulders meet their heads directly with no hint of a neck. The guidelines are essentially our "No shirt" sign. The fact that we often let the "No service" bit slip and help the miscreants (such as Bruce) or uninformed (people unaware of the guidelines) is no reason to disregard the guidelines when they've been pointed out INNUMERABLE times, and often to the person violating them. Bruce, if you don't want to play by our rules (after being asked to nicely at least 10 times), then go find another list or expect to be ignored in the future. We try to be flexible, but NONE of us are paid to help out on the list. This is a voluntary effort (and I do mean effort) by all of the contributors. The guidelines exist to try to expedite the flow of information. Your steadfast refusal to accept and abide by them is an egregious affront to the civility we try to maintain. Now, can we PLEASE let this goddam thread drop and get on to more important things? -- - Rick Stevens, Systems Engineer [EMAIL PROTECTED] - - AIM/Skype: therps2ICQ: 22643734Yahoo: origrps2 - -- -We look for things. Things that make us go!- -- -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
port mapping and lsof
Hi -- Periodically I get a connection between 2 host on port 1000. netstat, shown below, but lsof, when executed like -- /usr/sbin/lsof -i TCP:1000 -- shows nothing. If i execute -- /usr/sbin/lsof -i -nP I get nada, see below. Anyone know what or how I can establish what this connection is? I am running nfs between the two machines. Much thanks! -- Gary # netstat -nat Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp0 0 0.0.0.0:111 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:46774 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp0 0 0.0.0.0:34393 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6010 0.0.0.0:* LISTEN tcp0 0 127.0.0.1:6011 0.0.0.0:* LISTEN tcp0 0 192.168.1.2:1000192.168.1.1:59903 ESTABLISHED ( ### the connection ### ) tcp0 0 127.0.0.1:25127.0.0.1:44486 TIME_WAIT tcp0 0 192.168.1.2:991 192.168.1.1:2049 ESTABLISHED tcp0 0 :::22 :::* LISTEN tcp0 0 :::25 :::* LISTEN tcp0 0 ::1:6010:::* LISTEN tcp0 0 ::1:6011:::* LISTEN # /usr/sbin/lsof -i -nP COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME rpcbind1834 rpc6u IPv4 3898 UDP *:111 rpcbind1834 rpc7u IPv4 3902 UDP *:737 rpcbind1834 rpc8u IPv4 3903 TCP *:111 (LISTEN) rpc.statd 1853 rpcuser6u IPv4 3953 UDP *:757 rpc.statd 1853 rpcuser8u IPv4 3971 UDP *:40228 rpc.statd 1853 rpcuser9u IPv4 3974 TCP *:34393 (LISTEN) sshd 2182 root3u IPv4 4954 TCP *:22 (LISTEN) sshd 2182 root4u IPv6 4956 TCP *:22 (LISTEN) ntpd 2190 ntp 16u IPv4 4988 UDP *:123 ntpd 2190 ntp 17u IPv6 4989 UDP *:123 ntpd 2190 ntp 18u IPv6 4993 UDP [fe80::218:f3ff:fef6:3378]:123 ntpd 2190 ntp 19u IPv6 4994 UDP [::1]:123 ntpd 2190 ntp 20u IPv6 4995 UDP [fe80::218:f3ff:fef6:340e]:123 ntpd 2190 ntp 21u IPv4 4996 UDP 127.0.0.1:123 ntpd 2190 ntp 22u IPv4 4997 UDP 128.32.10.135:123 ntpd 2190 ntp 23u IPv4 4998 UDP 192.168.1.2:123 avahi-dae 2243avahi 14u IPv4 5213 UDP *:5353 avahi-dae 2243avahi 15u IPv4 5214 UDP *:54663 cupsd 2252 root4u IPv4 5251 TCP 127.0.0.1:631 (LISTEN) cupsd 2252 root6u IPv4 5254 UDP *:631 master 2428 root 12u IPv4 5775 TCP *:25 (LISTEN) master 2428 root 13u IPv6 5777 TCP *:25 (LISTEN) smtpd 29092 postfix6u IPv4 5775 TCP *:25 (LISTEN) smtpd 29092 postfix7u IPv6 5777 TCP *:25 (LISTEN) smtp 29173 postfix 12u IPv4 473909 TCP xxx.xxx.10.135:36858->209.85.217.185:25 (ESTABLISHED) -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Secure WebDAV in nautilus & Fedora 9
In fedora 9 Places-> Connect to server does not give you the option of secure webdav access. I can sucessfuly connect to this server in firefox but it's read only. using URI (https://example.com:2078) The server I'm trying to connect has a private SSL certificate. (so it's not trusted by system CA). Firefox let you put an exception. But I can try to connect to this server by typing 'davs://example.com:2078' in nautilus location bar. Nautilus prompts for the username/password, but after giving the username/password I cannot continue further. -- Prasan http://linux.wellassa.org -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Installing from F10 Live CD under VMWare
Has anyone successfully installed the latest F10 Live CD into VMWare Workstation 6.5 on Vista? The CD runs fine and the install appears to work. However, the system locks up in the first boot after the horizontal progress indicator goes almost all the way across the screen. Because it's the first boot, I don't get a grub screen to intercept and view any details. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: How to add packagekit to the Administration menu
On Thu, 2008-11-13 at 05:40 -0800, Ajit Warrier wrote: > I removed packagekit because it kept popping up errors on my screen (I > know, I should have tried to fix that instead!) You want to try PackageKit in updates-testing. It's much never than 0.2.x. Also, you need to file bugs if you want something fixed. > But anyway, I have now reinstalled it. However, it is not part of the > Administration menu any more, nor does it pop up alerts when there are > updates available. I have switched back to yum for now, but I am > curious as to whether there is a way I can get this to work the way it > used to. Please help. That menu item is provided by gnome-packagekit, which depends on PackageKit. If I were you, I would enable updates-testing, and install PackageKit and gnome-packagekit and try it out again. Richard. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
RE: Fedora Hangs on Laptop
for what it's worth.. and it might not be much! i have a toshiba satellite, running f9, and had an issue where the system would freeze/lockup, that i managed to resolve with new/different xorg drivers. basically, i changed from radeon, to radeonhd in the xrog.conf, and downloaded the appropriate driver. might help your issue.. but without knowing more about your symptoms/setup, can't say for sure. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dave Cross Sent: Thursday, November 13, 2008 12:08 AM To: Fedora List Subject: Re: Fedora Hangs on Laptop 2008/11/7 Dave Cross <[EMAIL PROTECTED]>: > I'm running Fedora 9 on a Dell XPS M1330 laptop. I'm using one of the > earliest F9 kernel (2.6.25-14.fc9.i686.PAE) because I've been unable > to get a wireless connection with any later kernel that I've tried. > > But I'm having huge problems with this kernel too. At random times the > machine just freezes completely. The capslock and num-lock buttons > flash on and off but the only way out of it seems to be to turn the > system off and restart. Sometimes it can be an hour or so before the > problems occurs, but more often it's a few minutes. This obviously > makes the system pretty much unusable. I can use the system for as > long as Iike when I boot it into Vista. > > Has anyone else seen this behaviour? Or do you have any suggestions on > how I can help to investigate the problem? Last night I tried the Fedora 10 preview on this machine and I'm pleased to report that not only did the wireless problems go away, but I was able to use the system for three hours without it hanging. Fedora 10 looks like a lovely release. I'm really looking forward to the official version. Many thanks to everyone who was involved. Dave... -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Hang coming out of suspend
On Wed, 2008-11-12 at 14:44 -0800, Wayne Feick wrote: The X.org nv driver was doing suspend/resume pretty well for me (only rare crashes on resume) until recently. Now it fails every time. If it's a pre-existing issue, then it has gotten much worse recently. Wayne. I believe the behavior depends on the card. Mine are 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1) 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 570M (rev a1) Both are relatively new cards. The nv driver didn't even detect them properly when F8 came out. (BTW, top posting is frowned on on this list.) On Wed, 2008-11-12 at 17:35 -0500, Matthew Saltzman wrote: > I believe this is a different bug (and I think it's in Bugzilla as such > against the xorg driver package, but I don't have the number handy). > The nvidia binary drivers work with my T61 (Quadro NVS 140M) modulo this > thread's intermittent freeze on resume (and worked fine before the > latest kernel). It works except for an annoying check on the second CPU > on resume on a T61p. > > The nv drivers do not resume properly on either machine, and have not > (in F8 and F9) since F8 was released. I don't really understand why > they can't get it to work, as the plain vesa drivers suspends and > resumes just fine, but the backlight never goes off when the screen is > idle. > -- Matthew Saltzman Clemson University Math Sciences mjs AT clemson DOT edu http://www.math.clemson.edu/~mjs -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
RE: install Fedora 9 on Toshiba Satellite A305-S6825
lawd buda has spake! or, on the other hand. people like me will still help, and we don't get wrapped up in the fact that the guy/gal didn't go by the exact thing in some doc.. hell, we may not have even read the doc that you're referring to... personally, i've found that as you get older... things like that matter a whole lot less. and it becomes a matter of if i can/want to help the questionaire who's posting... but, different strokes/different folks. peace -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tim Sent: Thursday, November 13, 2008 6:38 AM To: Community assistance, encouragement,and advice for using Fedora. Subject: RE: install Fedora 9 on Toshiba Satellite A305-S6825 What happens when you refuse to fit in: You piss off the regulars, the ones who use the list all the time, and provide the most help, and the most useful help. And your messages/problems get ignored by the regulars, who are most likely to have the answers to solve your problem, and see that the problem gets fixed for everyone else (you and they get guided to documentation, and to making bug reports, instead of just bitching). You might get an answer by some of the irregulars, who have a tendency to give you wrong and stupid instructions. Then you start a fight trying to change everyone else to suit you, and/or the MINORITY over to your MINORITY preferences. Of course you won't see that you're in the minority, because you've got your head too far up your ass. -- [EMAIL PROTECTED] ~]$ uname -r 2.6.26.6-79.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
RE: install Fedora 9 on Toshiba Satellite A305-S6825
What happens when you refuse to fit in: You piss off the regulars, the ones who use the list all the time, and provide the most help, and the most useful help. And your messages/problems get ignored by the regulars, who are most likely to have the answers to solve your problem, and see that the problem gets fixed for everyone else (you and they get guided to documentation, and to making bug reports, instead of just bitching). You might get an answer by some of the irregulars, who have a tendency to give you wrong and stupid instructions. Then you start a fight trying to change everyone else to suit you, and/or the MINORITY over to your MINORITY preferences. Of course you won't see that you're in the minority, because you've got your head too far up your ass. -- [EMAIL PROTECTED] ~]$ uname -r 2.6.26.6-79.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
On Thu, 2008-11-13 at 12:03 +, Timothy Murphy wrote: > Alex Makhlin wrote: > > > There is not yet a Fedora 10 distribution but only the beta Rawhide > > (Fedora 10). Here is a great utility I found to upgrade Fedora when new > > releases are available. You will first have to install it. > > > > as root type: > > yum install preupgrade > > preupgrade > > I've read this thread, but still don't understand exactly > what preupgrade does. > How does it differ at present from "yum update" > which seems to change /etc/fedora-release > to "Fedora release 10 (Cambridge)"? As I understand it, preupgrade analyzes your RPM database and downloads the packages you're going to need in order to upgrade to the next version. It doesn't install anything. The idea is to save you time when you actually do the upgrade. Think of it as a prefetch. poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: kdesvn and authentification
Adel ESSAFI imag.fr> writes: > how can I make authentification with kdesvn? The best solution is to use SSH key authentication: * Make sure you have a key for your local machine generated (with ssh-keygen). There should be either ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub or ~/.ssh/id_dsa and ~/.ssh/id_dsa.pub files (RSA is recommended). * Upload your public key to the repository machine: - If you have direct SSH/SFTP access, copy the contents of your ~/.ssh/id_*.pub file to ~/.ssh/authorized_keys on the remote machine (if the file does not exist yet, you have to create it), and make sure all of ~/.ssh is readable only by you (chmod -R go-rwx ~/.ssh). - If there's a web interface to upload SSH keys, upload your ~/.ssh/id_*.pub file there. WARNING: In both cases, make sure you upload the contents of the PUBLIC key (i.e. the one with the .pub extension). The private key should NEVER leave your machine. * Use svn+ssh://[EMAIL PROTECTED]/foo/ as your URL (where username is your account name on the repository server, svn.example.com is the server itself and foo is the path to your module). Kevin Kofler -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: 64 bit compiling
Ewan Mac Mahon macmahon.me.uk> writes: > With the possible exception of the kernel, that's unlikely to work at all > since a 32 bit system won't have 64 bit libraries installed to link > against. And Fedora's 32-bit GCC builds don't support -m64 at all. (The reason being that supporting -m64 in a 32-bit GCC slows down GCC significantly for everyone, even when building 32-bit stuff. So it's better to use a separate cross-compiler. Or just to run a 64-bit system.) Kevin Kofler -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: What will it take to get a 2.6.27 kernel in RH8 ?
Arthur Pemberton gmail.com> writes: > It should be noted that .27 kernel in Fedora pulls in Plymouth, as > well as some other stuff. The F9 version probably has fewer unwanted dependencies. Kevin Kofler -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: What will it take to get a 2.6.27 kernel in RH8 ?
Bruno Wolff III wolff.to> writes: > The latest f9 kernel is kernel-2.6.27.5-32 and it is tagged > dist-f9-updates-testing, so presumably you could get it from either bohdi or > koji. Or simply from the updates-testing-newkey repo. Please don't strain Koji needlessly by downloading packages from it when they're already in a mirrored repo. Kevin Kofler -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
How to add packagekit to the Administration menu
Hi all, I removed packagekit because it kept popping up errors on my screen (I know, I should have tried to fix that instead!) But anyway, I have now reinstalled it. However, it is not part of the Administration menu any more, nor does it pop up alerts when there are updates available. I have switched back to yum for now, but I am curious as to whether there is a way I can get this to work the way it used to. Please help. Thank you. Ajit -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
On Thu November 13 2008 7:03:48 am Timothy Murphy wrote: > I've read this thread, but still don't understand exactly > what preupgrade does. > How does it differ at present from "yum update" > which seems to change /etc/fedora-release > to "Fedora release 10 (Cambridge)"? a google of 'fedora preupgrade' yielded the following first hit http://fedoraproject.org/wiki/Features/PreUpgrade -- Claude Jones Brunswick, MD, USA -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 - no longer rawhide?
Alex Makhlin wrote: > There is not yet a Fedora 10 distribution but only the beta Rawhide > (Fedora 10). Here is a great utility I found to upgrade Fedora when new > releases are available. You will first have to install it. > > as root type: > yum install preupgrade > preupgrade I've read this thread, but still don't understand exactly what preupgrade does. How does it differ at present from "yum update" which seems to change /etc/fedora-release to "Fedora release 10 (Cambridge)"? -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: yum update error
On Wed, 12 Nov 2008 15:00:37 -0800 (PST), Fred Silsbee wrote: > I have: > adobe-linux-i386/ > fedora/ > livna/ > rpmfusion-free-updates/ > rpmfusion-free/ > rpmfusion-nonfree-updates/ > rpmfusion-nonfree/ > updates-newkey/ > updates/ > ..gpgkeyschecked.yum > > > and no trouble/errors yet! Yes, that's expected with the upgrade path from Livna to RPM Fusion. Still: http://livna-dl.reloumirrors.net/fedora/9/00_PLEASE_READ.txt -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: SOLVED (I think) Re: yum update error
On Wed, 12 Nov 2008 13:27:11 -0700, Kevin Kempter wrote: > I found that in all the packages you mentioned aboe I had > both a livna and an rpmfusion version installed. I removed the livna > versions, disabled the livna repo and life seems to be good (i.e. yum update > now works) Just in case other readers are interested in this, too, there are tools for such problems. From package "yum-utils" you can run "yum-complete-transaction" if an unfinished transaction is left, and/or "package-cleanup --cleandupes" to fix duplicate packages. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora 10 Preview: samba problem
On Wed, 2008-11-12 at 10:21 -0800, Steve Harrington wrote: > The issue seems to start when the windows machine comes online. netstat > returns a normal looking set of connections when there are no windows > machines on the network. But bring one online and there are 100's of > connections trying to connect to the ipp port. All from 127.0.0.1, as you showed before? I can only think that's due to samba then. Sounds like it's worth a bug report. Tim. */ signature.asc Description: This is a digitally signed message part -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: Fedora Hangs on Laptop
2008/11/7 Dave Cross <[EMAIL PROTECTED]>: > I'm running Fedora 9 on a Dell XPS M1330 laptop. I'm using one of the > earliest F9 kernel (2.6.25-14.fc9.i686.PAE) because I've been unable > to get a wireless connection with any later kernel that I've tried. > > But I'm having huge problems with this kernel too. At random times the > machine just freezes completely. The capslock and num-lock buttons > flash on and off but the only way out of it seems to be to turn the > system off and restart. Sometimes it can be an hour or so before the > problems occurs, but more often it's a few minutes. This obviously > makes the system pretty much unusable. I can use the system for as > long as Iike when I boot it into Vista. > > Has anyone else seen this behaviour? Or do you have any suggestions on > how I can help to investigate the problem? Last night I tried the Fedora 10 preview on this machine and I'm pleased to report that not only did the wireless problems go away, but I was able to use the system for three hours without it hanging. Fedora 10 looks like a lovely release. I'm really looking forward to the official version. Many thanks to everyone who was involved. Dave... -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
