Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On Sat, Mar 07, 2020 at 10:32:53AM -0500, David Michael wrote: > Using a compiler with a different host triplet is considered > cross-compiling, even when it is for the same architecture as the > build system. With such a cross-compiler, it is still valid to > optimize builds with --cpu=host. Drop the condition that aborts in > this case, since a cross-compiler for an incompatible architecture > will fail with -mtune=native anyway. > > Signed-off-by: David Michael > --- > > Hi, > > I am building software in a ChromeOS-style environment where the native > build system creates a cross-compiler with a different vendor string for > each supported architecture, and cross-compiled packages are installed > into their own root directory. The build system's architecture is not > handled any differently, so packages compatible with the native > architecture are still technically being cross-compiled. > > When I changed settings to tune for the native CPU so I can produce an > installation optimized to run on the build system hardware, FFmpeg fails > from this seemingly redundant test. Can it just be dropped? > > Thanks. > > David > > configure | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/configure b/configure > index 06e3a7b2a8..69ffdeb3ed 100755 > --- a/configure > +++ b/configure > @@ -4785,9 +4785,6 @@ if test -n "$sysroot"; then > fi > > if test "$cpu" = host; then > -enabled cross_compile && > -die "--cpu=host makes no sense when cross-compiling." > - > case "$cc_type" in I think that this should probably print a warning if the failure is removed because its a odd combination that likely more often than not is not what the user intended thx [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Those who are too smart to engage in politics are punished by being governed by those who are dumber. -- Plato signature.asc Description: PGP signature ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On Mon, Mar 30, 2020 at 1:00 PM Derek Buitenhuis wrote: > On 07/03/2020 15:32, David Michael wrote: > > Using a compiler with a different host triplet is considered > > cross-compiling, even when it is for the same architecture as the > > build system. With such a cross-compiler, it is still valid to > > optimize builds with --cpu=host. Drop the condition that aborts in > > this case, since a cross-compiler for an incompatible architecture > > will fail with -mtune=native anyway. > > Is there a reason you would set the cross-prefix instead of just the --cc, > etc. > when compiling natively? I want everything to use the cross-prefixed versions since those tools are configured to build software in a sysroot using a different set of compiler features than software in the minimal build root. I am using the same process as when cross-compiling OS images for other incompatible architectures; configuring tuning for the build system's CPU is just another valid use of this setup. Thanks. David ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On 07/03/2020 15:32, David Michael wrote: > Using a compiler with a different host triplet is considered > cross-compiling, even when it is for the same architecture as the > build system. With such a cross-compiler, it is still valid to > optimize builds with --cpu=host. Drop the condition that aborts in > this case, since a cross-compiler for an incompatible architecture > will fail with -mtune=native anyway. Is there a reason you would set the cross-prefix instead of just the --cc, etc. when compiling natively? - Derek ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On Sun, Mar 22, 2020 at 11:01 PM David Michael wrote: > On Mon, Mar 16, 2020 at 9:16 AM David Michael wrote: > > On Sat, Mar 7, 2020 at 10:32 AM David Michael wrote: > > > Using a compiler with a different host triplet is considered > > > cross-compiling, even when it is for the same architecture as the > > > build system. With such a cross-compiler, it is still valid to > > > optimize builds with --cpu=host. Drop the condition that aborts in > > > this case, since a cross-compiler for an incompatible architecture > > > will fail with -mtune=native anyway. > > > > > > Signed-off-by: David Michael > > > --- > > > > > > Hi, > > > > > > I am building software in a ChromeOS-style environment where the native > > > build system creates a cross-compiler with a different vendor string for > > > each supported architecture, and cross-compiled packages are installed > > > into their own root directory. The build system's architecture is not > > > handled any differently, so packages compatible with the native > > > architecture are still technically being cross-compiled. > > > > > > When I changed settings to tune for the native CPU so I can produce an > > > installation optimized to run on the build system hardware, FFmpeg fails > > > from this seemingly redundant test. Can it just be dropped? > > > > > > Thanks. > > > > > > David > > > > > > configure | 3 --- > > > 1 file changed, 3 deletions(-) > > > > > > diff --git a/configure b/configure > > > index 06e3a7b2a8..69ffdeb3ed 100755 > > > --- a/configure > > > +++ b/configure > > > @@ -4785,9 +4785,6 @@ if test -n "$sysroot"; then > > > fi > > > > > > if test "$cpu" = host; then > > > -enabled cross_compile && > > > -die "--cpu=host makes no sense when cross-compiling." > > > - > > > case "$cc_type" in > > > gcc|llvm_gcc) > > > check_native(){ > > > -- > > > 2.21.1 > > > > Ping. > > Ping. Ping. ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On Mon, Mar 16, 2020 at 9:16 AM David Michael wrote: > On Sat, Mar 7, 2020 at 10:32 AM David Michael wrote: > > Using a compiler with a different host triplet is considered > > cross-compiling, even when it is for the same architecture as the > > build system. With such a cross-compiler, it is still valid to > > optimize builds with --cpu=host. Drop the condition that aborts in > > this case, since a cross-compiler for an incompatible architecture > > will fail with -mtune=native anyway. > > > > Signed-off-by: David Michael > > --- > > > > Hi, > > > > I am building software in a ChromeOS-style environment where the native > > build system creates a cross-compiler with a different vendor string for > > each supported architecture, and cross-compiled packages are installed > > into their own root directory. The build system's architecture is not > > handled any differently, so packages compatible with the native > > architecture are still technically being cross-compiled. > > > > When I changed settings to tune for the native CPU so I can produce an > > installation optimized to run on the build system hardware, FFmpeg fails > > from this seemingly redundant test. Can it just be dropped? > > > > Thanks. > > > > David > > > > configure | 3 --- > > 1 file changed, 3 deletions(-) > > > > diff --git a/configure b/configure > > index 06e3a7b2a8..69ffdeb3ed 100755 > > --- a/configure > > +++ b/configure > > @@ -4785,9 +4785,6 @@ if test -n "$sysroot"; then > > fi > > > > if test "$cpu" = host; then > > -enabled cross_compile && > > -die "--cpu=host makes no sense when cross-compiling." > > - > > case "$cc_type" in > > gcc|llvm_gcc) > > check_native(){ > > -- > > 2.21.1 > > Ping. Ping. ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
On Sat, Mar 7, 2020 at 10:32 AM David Michael wrote: > Using a compiler with a different host triplet is considered > cross-compiling, even when it is for the same architecture as the > build system. With such a cross-compiler, it is still valid to > optimize builds with --cpu=host. Drop the condition that aborts in > this case, since a cross-compiler for an incompatible architecture > will fail with -mtune=native anyway. > > Signed-off-by: David Michael > --- > > Hi, > > I am building software in a ChromeOS-style environment where the native > build system creates a cross-compiler with a different vendor string for > each supported architecture, and cross-compiled packages are installed > into their own root directory. The build system's architecture is not > handled any differently, so packages compatible with the native > architecture are still technically being cross-compiled. > > When I changed settings to tune for the native CPU so I can produce an > installation optimized to run on the build system hardware, FFmpeg fails > from this seemingly redundant test. Can it just be dropped? > > Thanks. > > David > > configure | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/configure b/configure > index 06e3a7b2a8..69ffdeb3ed 100755 > --- a/configure > +++ b/configure > @@ -4785,9 +4785,6 @@ if test -n "$sysroot"; then > fi > > if test "$cpu" = host; then > -enabled cross_compile && > -die "--cpu=host makes no sense when cross-compiling." > - > case "$cc_type" in > gcc|llvm_gcc) > check_native(){ > -- > 2.21.1 Ping. ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
[FFmpeg-devel] [PATCH] configure: Do not abort when cross-compiling to the native CPU
Using a compiler with a different host triplet is considered cross-compiling, even when it is for the same architecture as the build system. With such a cross-compiler, it is still valid to optimize builds with --cpu=host. Drop the condition that aborts in this case, since a cross-compiler for an incompatible architecture will fail with -mtune=native anyway. Signed-off-by: David Michael --- Hi, I am building software in a ChromeOS-style environment where the native build system creates a cross-compiler with a different vendor string for each supported architecture, and cross-compiled packages are installed into their own root directory. The build system's architecture is not handled any differently, so packages compatible with the native architecture are still technically being cross-compiled. When I changed settings to tune for the native CPU so I can produce an installation optimized to run on the build system hardware, FFmpeg fails from this seemingly redundant test. Can it just be dropped? Thanks. David configure | 3 --- 1 file changed, 3 deletions(-) diff --git a/configure b/configure index 06e3a7b2a8..69ffdeb3ed 100755 --- a/configure +++ b/configure @@ -4785,9 +4785,6 @@ if test -n "$sysroot"; then fi if test "$cpu" = host; then -enabled cross_compile && -die "--cpu=host makes no sense when cross-compiling." - case "$cc_type" in gcc|llvm_gcc) check_native(){ -- 2.21.1 ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".