Re: [FFmpeg-devel] [PATCH v2] avcodec/nvenc: High bit depth encoding for HEVC
On 19.04.2024 10:38, Diego Felix de Souza via ffmpeg-devel wrote: From: Diego Felix de Souza Adding 10-bit encoding support for HEVC if the input is 8-bit. In case of 8-bit input content, NVENC performs an internal CUDA 8 to 10-bit conversion of the input prior to encoding. Currently, only AV1 supports encoding 8-bit content as 10-bit. Signed-off-by: Diego Felix de Souza --- libavcodec/nvenc.c | 10 +- libavcodec/nvenc_hevc.c | 3 +++ 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/libavcodec/nvenc.c b/libavcodec/nvenc.c index 794174a53f..e48224347d 100644 --- a/libavcodec/nvenc.c +++ b/libavcodec/nvenc.c @@ -514,7 +514,7 @@ static int nvenc_check_capabilities(AVCodecContext *avctx) } ret = nvenc_check_cap(avctx, NV_ENC_CAPS_SUPPORT_10BIT_ENCODE); -if (IS_10BIT(ctx->data_pix_fmt) && ret <= 0) { +if ((IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) && ret <= 0) { av_log(avctx, AV_LOG_WARNING, "10 bit encode not supported\n"); return AVERROR(ENOSYS); } @@ -1420,8 +1420,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) break; } -// force setting profile as main10 if input is 10 bit -if (IS_10BIT(ctx->data_pix_fmt)) { +// force setting profile as main10 if input is 10 bit or if it should be encoded as 10 bit +if (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) { cc->profileGUID = NV_ENC_HEVC_PROFILE_MAIN10_GUID; avctx->profile = AV_PROFILE_HEVC_MAIN_10; } @@ -1435,8 +1435,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) hevc->chromaFormatIDC = IS_YUV444(ctx->data_pix_fmt) ? 3 : 1; #ifdef NVENC_HAVE_NEW_BIT_DEPTH_API -hevc->inputBitDepth = hevc->outputBitDepth = -IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->inputBitDepth = IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->outputBitDepth = (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; #else hevc->pixelBitDepthMinus8 = IS_10BIT(ctx->data_pix_fmt) ? 2 : 0; #endif diff --git a/libavcodec/nvenc_hevc.c b/libavcodec/nvenc_hevc.c index b949cb1bd7..d54e5f2512 100644 --- a/libavcodec/nvenc_hevc.c +++ b/libavcodec/nvenc_hevc.c @@ -183,6 +183,9 @@ static const AVOption options[] = { { "fullres", "Two Pass encoding is enabled where first Pass is full resolution", 0, AV_OPT_TYPE_CONST, { .i64 = NV_ENC_TWO_PASS_FULL_RESOLUTION },0, 0, VE, .unit = "multipass" }, #endif +#ifdef NVENC_HAVE_NEW_BIT_DEPTH_API +{ "highbitdepth", "Enable 10 bit encode for 8 bit input",OFFSET(highbitdepth),AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, +#endif #ifdef NVENC_HAVE_LDKFS { "ldkfs","Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR", OFFSET(ldkfs), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UCHAR_MAX, VE }, -- 2.34.1 applied, thanks ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH v2] avcodec/nvenc: High bit depth encoding for HEVC
On 19/04/2024 13:29, Lynne wrote: Apr 19, 2024, 10:39 by ffmpeg-devel@ffmpeg.org: From: Diego Felix de Souza Adding 10-bit encoding support for HEVC if the input is 8-bit. In case of 8-bit input content, NVENC performs an internal CUDA 8 to 10-bit conversion of the input prior to encoding. Currently, only AV1 supports encoding 8-bit content as 10-bit. Signed-off-by: Diego Felix de Souza --- libavcodec/nvenc.c | 10 +- libavcodec/nvenc_hevc.c | 3 +++ 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/libavcodec/nvenc.c b/libavcodec/nvenc.c index 794174a53f..e48224347d 100644 --- a/libavcodec/nvenc.c +++ b/libavcodec/nvenc.c @@ -514,7 +514,7 @@ static int nvenc_check_capabilities(AVCodecContext *avctx) } ret = nvenc_check_cap(avctx, NV_ENC_CAPS_SUPPORT_10BIT_ENCODE); -if (IS_10BIT(ctx->data_pix_fmt) && ret <= 0) { +if ((IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) && ret <= 0) { av_log(avctx, AV_LOG_WARNING, "10 bit encode not supported\n"); return AVERROR(ENOSYS); } @@ -1420,8 +1420,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) break; } -// force setting profile as main10 if input is 10 bit -if (IS_10BIT(ctx->data_pix_fmt)) { +// force setting profile as main10 if input is 10 bit or if it should be encoded as 10 bit +if (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) { cc->profileGUID = NV_ENC_HEVC_PROFILE_MAIN10_GUID; avctx->profile = AV_PROFILE_HEVC_MAIN_10; } @@ -1435,8 +1435,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) hevc->chromaFormatIDC = IS_YUV444(ctx->data_pix_fmt) ? 3 : 1; #ifdef NVENC_HAVE_NEW_BIT_DEPTH_API -hevc->inputBitDepth = hevc->outputBitDepth = -IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->inputBitDepth = IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->outputBitDepth = (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; #else hevc->pixelBitDepthMinus8 = IS_10BIT(ctx->data_pix_fmt) ? 2 : 0; #endif diff --git a/libavcodec/nvenc_hevc.c b/libavcodec/nvenc_hevc.c index b949cb1bd7..d54e5f2512 100644 --- a/libavcodec/nvenc_hevc.c +++ b/libavcodec/nvenc_hevc.c @@ -183,6 +183,9 @@ static const AVOption options[] = { { "fullres", "Two Pass encoding is enabled where first Pass is full resolution", 0,AV_OPT_TYPE_CONST, { .i64 = NV_ENC_TWO_PASS_FULL_RESOLUTION }, 0, 0, VE, .unit = "multipass" }, #endif +#ifdef NVENC_HAVE_NEW_BIT_DEPTH_API +{ "highbitdepth", "Enable 10 bit encode for 8 bit input",OFFSET(highbitdepth),AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, +#endif #ifdef NVENC_HAVE_LDKFS { "ldkfs","Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR", OFFSET(ldkfs),AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UCHAR_MAX, VE }, -- 2.34.1 Rather than introducing a new setting, could you instead use AVCodecContext.sw_pix_fmt? It's currently documented as being unused for encoding, but it fits the purpose. Vulkan can also use it. I'm not sure I'm a fan of that. Setting sw_pix_fmt to some arbitrary 10bit format seems super random. How would that even look like from a users point of view who wanted to utilize this up-conversion mode via cli? ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH v2] avcodec/nvenc: High bit depth encoding for HEVC
Apr 19, 2024, 10:39 by ffmpeg-devel@ffmpeg.org: > From: Diego Felix de Souza > > Adding 10-bit encoding support for HEVC if the input is 8-bit. In > case of 8-bit input content, NVENC performs an internal CUDA 8 to > 10-bit conversion of the input prior to encoding. Currently, only > AV1 supports encoding 8-bit content as 10-bit. > > Signed-off-by: Diego Felix de Souza > --- > libavcodec/nvenc.c | 10 +- > libavcodec/nvenc_hevc.c | 3 +++ > 2 files changed, 8 insertions(+), 5 deletions(-) > > diff --git a/libavcodec/nvenc.c b/libavcodec/nvenc.c > index 794174a53f..e48224347d 100644 > --- a/libavcodec/nvenc.c > +++ b/libavcodec/nvenc.c > @@ -514,7 +514,7 @@ static int nvenc_check_capabilities(AVCodecContext *avctx) > } > > ret = nvenc_check_cap(avctx, NV_ENC_CAPS_SUPPORT_10BIT_ENCODE); > -if (IS_10BIT(ctx->data_pix_fmt) && ret <= 0) { > +if ((IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) && ret <= 0) { > av_log(avctx, AV_LOG_WARNING, "10 bit encode not supported\n"); > return AVERROR(ENOSYS); > } > @@ -1420,8 +1420,8 @@ static av_cold int > nvenc_setup_hevc_config(AVCodecContext *avctx) > break; > } > > -// force setting profile as main10 if input is 10 bit > -if (IS_10BIT(ctx->data_pix_fmt)) { > +// force setting profile as main10 if input is 10 bit or if it should be > encoded as 10 bit > +if (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) { > cc->profileGUID = NV_ENC_HEVC_PROFILE_MAIN10_GUID; > avctx->profile = AV_PROFILE_HEVC_MAIN_10; > } > @@ -1435,8 +1435,8 @@ static av_cold int > nvenc_setup_hevc_config(AVCodecContext *avctx) > hevc->chromaFormatIDC = IS_YUV444(ctx->data_pix_fmt) ? 3 : 1; > > #ifdef NVENC_HAVE_NEW_BIT_DEPTH_API > -hevc->inputBitDepth = hevc->outputBitDepth = > -IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : > NV_ENC_BIT_DEPTH_8; > +hevc->inputBitDepth = IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 > : NV_ENC_BIT_DEPTH_8; > +hevc->outputBitDepth = (IS_10BIT(ctx->data_pix_fmt) || > ctx->highbitdepth) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; > #else > hevc->pixelBitDepthMinus8 = IS_10BIT(ctx->data_pix_fmt) ? 2 : 0; > #endif > diff --git a/libavcodec/nvenc_hevc.c b/libavcodec/nvenc_hevc.c > index b949cb1bd7..d54e5f2512 100644 > --- a/libavcodec/nvenc_hevc.c > +++ b/libavcodec/nvenc_hevc.c > @@ -183,6 +183,9 @@ static const AVOption options[] = { > { "fullres", "Two Pass encoding is enabled where first Pass is full > resolution", > 0,AV_OPT_TYPE_CONST, { .i64 = > NV_ENC_TWO_PASS_FULL_RESOLUTION },0, 0, > VE, .unit = "multipass" }, > #endif > +#ifdef NVENC_HAVE_NEW_BIT_DEPTH_API > +{ "highbitdepth", "Enable 10 bit encode for 8 bit > input",OFFSET(highbitdepth),AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, > +#endif > #ifdef NVENC_HAVE_LDKFS > { "ldkfs","Low delay key frame scale; Specifies the Scene Change > frame size increase allowed in case of single frame VBV and CBR", > OFFSET(ldkfs),AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UCHAR_MAX, VE }, > -- > 2.34.1 > Rather than introducing a new setting, could you instead use AVCodecContext.sw_pix_fmt? It's currently documented as being unused for encoding, but it fits the purpose. Vulkan can also use it. ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
[FFmpeg-devel] [PATCH v2] avcodec/nvenc: High bit depth encoding for HEVC
From: Diego Felix de Souza Adding 10-bit encoding support for HEVC if the input is 8-bit. In case of 8-bit input content, NVENC performs an internal CUDA 8 to 10-bit conversion of the input prior to encoding. Currently, only AV1 supports encoding 8-bit content as 10-bit. Signed-off-by: Diego Felix de Souza --- libavcodec/nvenc.c | 10 +- libavcodec/nvenc_hevc.c | 3 +++ 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/libavcodec/nvenc.c b/libavcodec/nvenc.c index 794174a53f..e48224347d 100644 --- a/libavcodec/nvenc.c +++ b/libavcodec/nvenc.c @@ -514,7 +514,7 @@ static int nvenc_check_capabilities(AVCodecContext *avctx) } ret = nvenc_check_cap(avctx, NV_ENC_CAPS_SUPPORT_10BIT_ENCODE); -if (IS_10BIT(ctx->data_pix_fmt) && ret <= 0) { +if ((IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) && ret <= 0) { av_log(avctx, AV_LOG_WARNING, "10 bit encode not supported\n"); return AVERROR(ENOSYS); } @@ -1420,8 +1420,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) break; } -// force setting profile as main10 if input is 10 bit -if (IS_10BIT(ctx->data_pix_fmt)) { +// force setting profile as main10 if input is 10 bit or if it should be encoded as 10 bit +if (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) { cc->profileGUID = NV_ENC_HEVC_PROFILE_MAIN10_GUID; avctx->profile = AV_PROFILE_HEVC_MAIN_10; } @@ -1435,8 +1435,8 @@ static av_cold int nvenc_setup_hevc_config(AVCodecContext *avctx) hevc->chromaFormatIDC = IS_YUV444(ctx->data_pix_fmt) ? 3 : 1; #ifdef NVENC_HAVE_NEW_BIT_DEPTH_API -hevc->inputBitDepth = hevc->outputBitDepth = -IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->inputBitDepth = IS_10BIT(ctx->data_pix_fmt) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; +hevc->outputBitDepth = (IS_10BIT(ctx->data_pix_fmt) || ctx->highbitdepth) ? NV_ENC_BIT_DEPTH_10 : NV_ENC_BIT_DEPTH_8; #else hevc->pixelBitDepthMinus8 = IS_10BIT(ctx->data_pix_fmt) ? 2 : 0; #endif diff --git a/libavcodec/nvenc_hevc.c b/libavcodec/nvenc_hevc.c index b949cb1bd7..d54e5f2512 100644 --- a/libavcodec/nvenc_hevc.c +++ b/libavcodec/nvenc_hevc.c @@ -183,6 +183,9 @@ static const AVOption options[] = { { "fullres", "Two Pass encoding is enabled where first Pass is full resolution", 0, AV_OPT_TYPE_CONST, { .i64 = NV_ENC_TWO_PASS_FULL_RESOLUTION },0, 0, VE, .unit = "multipass" }, #endif +#ifdef NVENC_HAVE_NEW_BIT_DEPTH_API +{ "highbitdepth", "Enable 10 bit encode for 8 bit input",OFFSET(highbitdepth),AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE }, +#endif #ifdef NVENC_HAVE_LDKFS { "ldkfs","Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR", OFFSET(ldkfs), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, UCHAR_MAX, VE }, -- 2.34.1 --- NVIDIA GmbH Wuerselen Amtsgericht Aachen HRB 8361 Managing Directors: Rebecca Peters, Donald Robertson, Janet Hall, Ludwig von Reiche --- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. --- ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".