Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
Hi Martin, On Fri, 15 Jan 2021 at 04:59, Martin Storsjö wrote: > > Hi Josh, > > On Tue, 22 Dec 2020, Josh Allmann wrote: > > > Thank you for taking the time to look into this! Tested with your > > alternative patch and it does seem to be an improvement. I was able to > > find a case where it didn't seem to do the correct thing (described > > below), but this is not a regression; master doesn't do the correct > > thing, and neither does my patch. I haven't looked much at what the > > code is doing beyond running these tests, but could find some time to > > dig in early 2021 if it's not fixed by then. > > > > I think this issue isn't related to the mov muxer at least, but is more > related to how stream copy works at the ffmpeg.c level, and/or how the > seeking is done. > Thanks for the tip - still haven't had a chance to investigate the behavior. > As that's unrelated, and I haven't heard any objections to my version of > the patch, I think I'll go ahead and land it soon then. > The patch is certainly an improvement over the current behavior, no objections from me. Josh ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
Hi Josh, On Tue, 22 Dec 2020, Josh Allmann wrote: Thank you for taking the time to look into this! Tested with your alternative patch and it does seem to be an improvement. I was able to find a case where it didn't seem to do the correct thing (described below), but this is not a regression; master doesn't do the correct thing, and neither does my patch. I haven't looked much at what the code is doing beyond running these tests, but could find some time to dig in early 2021 if it's not fixed by then. First, a working sample with pts > 0 . This has a 600-frame GOP (20s @ 30fps) to show that cutting mid-GOP works correctly. https://trac.ffmpeg.org/raw-attachment/ticket/9028/gop-600.mp4 Command to generate a clipped sample with edit list. This spans two GOPs. ffmpeg -ss 17.319 -i gop-600.mp4 -t 5 -c copy -movflags +faststart -y cut-mp4-600.mp4 Things look good with ffprobe, and playback works well with ffplay; it starts right around the 17-second mark. The sample is a timecode pattern so it is easy to verify. If the sample is a mpegts (rather than a mp4, all other things identical), then things are a bit odd: https://trac.ffmpeg.org/raw-attachment/ticket/9028/gop-600.ts Cut the sample with: ffmpeg -ss 17.319 -i gop-600.ts -t 5 -c copy -movflags +faststart -y cut-ts-600.mp4 Probing gives the correct duration with a start time of 2.683. However, playback starts at the 20 second mark. (Same timecode pattern, so easy to visually verify.) Incidentally, it seems that 20 - 2.683 = 17.316, which is the original cut position. ffprobe cut-ts-600.mp4 gives "Duration: 00:00:05.12, start: 2.683000" The trac ticket has a bit more info (including commands for how to generate the samples) but this is the gist of it. I think this issue isn't related to the mov muxer at least, but is more related to how stream copy works at the ffmpeg.c level, and/or how the seeking is done. As that's unrelated, and I haven't heard any objections to my version of the patch, I think I'll go ahead and land it soon then. // Martin ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
Hi Martin,
On Sat, 19 Dec 2020 at 15:10, Martin Storsjö wrote:
>
> On Fri, 11 Dec 2020, Josh Allmann wrote:
>
> > On Fri, 11 Dec 2020 at 14:07, Martin Storsjö wrote:
> >>
> >> On Fri, 11 Dec 2020, Josh Allmann wrote:
> >>
> >> > A negative start_dts value (eg, delay from edit lists) typically yields
> >> > a duration larger than end_pts. During edit list processing, the
> >> > delay is removed again, yielding the correct duration within the elst.
> >> >
> >> > However, other duration-carrying atoms (tkhd, mvhd, mdhd) still have
> >> > the delay incorporated into their durations. This is incorrect.
> >> >
> >> > Fix this by withholding delay from the duration if edit lists are used.
> >> > This also simplifies edit-list processing a bit, since the delay
> >> > does not need to be removed from the calculated duration again.
> >> > ---
> >> >
> >> > The mov spec says that the tkhd duration is "derived from the track's
> >> > edits" [1] and the duratons of the other atoms (mvhd, mdhd) are in turn
> >> > taken from the longest track. So it seems that incorporating the delay
> >> > into the track duration is a bug in itself when the edit list has the
> >> > correct duration, and this propagates out tothe other top-level
> >> > durations.
> >> >
> >> > Unsure of how this change interacts with other modes that may expect
> >> > negative timestamps such as CMAF, so the patch errs on the side of
> >> > caution and only takes effect if edit lists are used. Can loosen that
> >> > up if necessary.
> >> >
> >> > [1]
> >> > https://developer.apple.com/library/archive/documentation/QuickTime/QTFF/QTFFChap2/qtff2.html#//apple_ref/doc/uid/TP4939-CH204-BBCEIDFA
> >> >
> >> > libavformat/movenc.c | 13 -
> >> > 1 file changed, 8 insertions(+), 5 deletions(-)
> >> >
> >> > diff --git a/libavformat/movenc.c b/libavformat/movenc.c
> >> > index 7db2e28840..31441a9f6c 100644
> >> > --- a/libavformat/movenc.c
> >> > +++ b/libavformat/movenc.c
> >> > @@ -2831,7 +2831,14 @@ static int64_t calc_pts_duration(MOVMuxContext
> >> > *mov, MOVTrack *track)
> >> > if (track->end_pts != AV_NOPTS_VALUE &&
> >> > track->start_dts != AV_NOPTS_VALUE &&
> >> > track->start_cts != AV_NOPTS_VALUE) {
> >> > -return track->end_pts - (track->start_dts + track->start_cts);
> >> > +int64_t dur = track->end_pts, delay = track->start_dts +
> >> > track->start_cts;
> >> > +/* Note, this delay is calculated from the pts of the first
> >> > sample,
> >> > + * ensuring that we don't reduce the duration for cases with
> >> > + * dts<0 pts=0. */
> >>
> >> If you have a stream starting with dts<0 pts=0, you'll have start_pts =
> >> start_dts + start_cts = 0. That gives delay=0 after your modification. But
> >> the comment says "don't reduce the duration for cases with pts=0" - where
> >> the delay variable would be zero anyway?
> >>
> >
> > I'm not quite sure what you mean - that the comment is outdated?
> > Or that this modification would perhaps not behave as expected?
> >
> > For what it's worth, the cases I'm concerned with have start_pts < 0.
> >
> >>
> >>
> >> I don't manage to follow the reasoning and explanation in the commit
> >> message. To be able to concretely reason about this issue at all, we need
> >> to look at a concrete example. Can you provide a sample input file and a
> >> reproducible command, and point out which exact field in the muxer output
> >> of that case that you consider wrong?
> >>
> >
> > Had to create a trac to find somewhere to host the sample. Tried to put
> > some details there but the formatting seems messed up and I can't figure
> > out how to edit, apologies. So here is some more info -
> >
> > Input sample:
> >
> > https://trac.ffmpeg.org/raw-attachment/ticket/9028/test-timecode.mp4
> >
> > Run the following for a transmuxed clip from 3s for a 5s duration:
> >
> > ffmpeg -ss 3 -i test-timecode.mp4 -t 5 -c copy out.mp4
> >
> > Note that the actual cut location is mid-GOP, so there's a 1s pts delay
> > at the beginning of the output file with negative pts.
> >
> > ffprobe shows:
> >
> > ffprobe -show_streams -show_format out.mp4 2>&1 | grep duration=
> >
> > duration=5.166992 # stream duration - correct
> > duration=6.167000 # format duration - incorrect
> >
> > mp4dump'ing out.mp4 gives this:
> >
> > # incorrect: duration should be sum of elst durations
> > [tkhd] size=12+80, flags=3
> > duration = 6167
> >
> > # correct
> > [elst] size=12+16
> >entry_count = 1
> >entry/segment duration = 5167
> >
> > # incorrect; derived from track duration (tkhd)
> > [mvhd] size=12+96
> >timescale = 1000
> >duration = 6167
>
> Ok, now I've finally had time to dig into this. It does indeed seem like
> what we produce right now is incorrect.
>
> I don't think your patch does the right thing for cases that start with
> pts > 0. For those cases, the value returned by calc_pts_duration to
> mov_write_edts_tag would
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
On Fri, 11 Dec 2020, Josh Allmann wrote:
On Fri, 11 Dec 2020 at 14:07, Martin Storsjö wrote:
On Fri, 11 Dec 2020, Josh Allmann wrote:
> A negative start_dts value (eg, delay from edit lists) typically yields
> a duration larger than end_pts. During edit list processing, the
> delay is removed again, yielding the correct duration within the elst.
>
> However, other duration-carrying atoms (tkhd, mvhd, mdhd) still have
> the delay incorporated into their durations. This is incorrect.
>
> Fix this by withholding delay from the duration if edit lists are used.
> This also simplifies edit-list processing a bit, since the delay
> does not need to be removed from the calculated duration again.
> ---
>
> The mov spec says that the tkhd duration is "derived from the track's
> edits" [1] and the duratons of the other atoms (mvhd, mdhd) are in turn
> taken from the longest track. So it seems that incorporating the delay
> into the track duration is a bug in itself when the edit list has the
> correct duration, and this propagates out tothe other top-level durations.
>
> Unsure of how this change interacts with other modes that may expect
> negative timestamps such as CMAF, so the patch errs on the side of
> caution and only takes effect if edit lists are used. Can loosen that
> up if necessary.
>
> [1]
https://developer.apple.com/library/archive/documentation/QuickTime/QTFF/QTFFChap2/qtff2.html#//apple_ref/doc/uid/TP4939-CH204-BBCEIDFA
>
> libavformat/movenc.c | 13 -
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/libavformat/movenc.c b/libavformat/movenc.c
> index 7db2e28840..31441a9f6c 100644
> --- a/libavformat/movenc.c
> +++ b/libavformat/movenc.c
> @@ -2831,7 +2831,14 @@ static int64_t calc_pts_duration(MOVMuxContext *mov,
MOVTrack *track)
> if (track->end_pts != AV_NOPTS_VALUE &&
> track->start_dts != AV_NOPTS_VALUE &&
> track->start_cts != AV_NOPTS_VALUE) {
> -return track->end_pts - (track->start_dts + track->start_cts);
> +int64_t dur = track->end_pts, delay = track->start_dts +
track->start_cts;
> +/* Note, this delay is calculated from the pts of the first sample,
> + * ensuring that we don't reduce the duration for cases with
> + * dts<0 pts=0. */
If you have a stream starting with dts<0 pts=0, you'll have start_pts =
start_dts + start_cts = 0. That gives delay=0 after your modification. But
the comment says "don't reduce the duration for cases with pts=0" - where
the delay variable would be zero anyway?
I'm not quite sure what you mean - that the comment is outdated?
Or that this modification would perhaps not behave as expected?
For what it's worth, the cases I'm concerned with have start_pts < 0.
I don't manage to follow the reasoning and explanation in the commit
message. To be able to concretely reason about this issue at all, we need
to look at a concrete example. Can you provide a sample input file and a
reproducible command, and point out which exact field in the muxer output
of that case that you consider wrong?
Had to create a trac to find somewhere to host the sample. Tried to put
some details there but the formatting seems messed up and I can't figure
out how to edit, apologies. So here is some more info -
Input sample:
https://trac.ffmpeg.org/raw-attachment/ticket/9028/test-timecode.mp4
Run the following for a transmuxed clip from 3s for a 5s duration:
ffmpeg -ss 3 -i test-timecode.mp4 -t 5 -c copy out.mp4
Note that the actual cut location is mid-GOP, so there's a 1s pts delay
at the beginning of the output file with negative pts.
ffprobe shows:
ffprobe -show_streams -show_format out.mp4 2>&1 | grep duration=
duration=5.166992 # stream duration - correct
duration=6.167000 # format duration - incorrect
mp4dump'ing out.mp4 gives this:
# incorrect: duration should be sum of elst durations
[tkhd] size=12+80, flags=3
duration = 6167
# correct
[elst] size=12+16
entry_count = 1
entry/segment duration = 5167
# incorrect; derived from track duration (tkhd)
[mvhd] size=12+96
timescale = 1000
duration = 6167
Ok, now I've finally had time to dig into this. It does indeed seem like
what we produce right now is incorrect.
I don't think your patch does the right thing for cases that start with
pts > 0. For those cases, the value returned by calc_pts_duration to
mov_write_edts_tag would need to only cover the sample data itself, but
for the other header durations would need to include the extra offset
(adding the extra pts to it). And overall, the patch feels to me as it
achieves it in a way that doesn't fit with how my mental model for this
code is set up.
I've made an alternative patch that I'll post momentarily, where I try to
address the issue, but in a way that fits the way I understand the code.
For your particular example code, it produces the same output as your
patch, but I believe that it should do the right
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
Hi,
On Fri, 11 Dec 2020, Josh Allmann wrote:
On Fri, 11 Dec 2020 at 14:07, Martin Storsjö wrote:
On Fri, 11 Dec 2020, Josh Allmann wrote:
> A negative start_dts value (eg, delay from edit lists) typically yields
> a duration larger than end_pts. During edit list processing, the
> delay is removed again, yielding the correct duration within the elst.
>
> However, other duration-carrying atoms (tkhd, mvhd, mdhd) still have
> the delay incorporated into their durations. This is incorrect.
>
> Fix this by withholding delay from the duration if edit lists are used.
> This also simplifies edit-list processing a bit, since the delay
> does not need to be removed from the calculated duration again.
> ---
>
> The mov spec says that the tkhd duration is "derived from the track's
> edits" [1] and the duratons of the other atoms (mvhd, mdhd) are in turn
> taken from the longest track. So it seems that incorporating the delay
> into the track duration is a bug in itself when the edit list has the
> correct duration, and this propagates out tothe other top-level durations.
>
> Unsure of how this change interacts with other modes that may expect
> negative timestamps such as CMAF, so the patch errs on the side of
> caution and only takes effect if edit lists are used. Can loosen that
> up if necessary.
>
> [1]
https://developer.apple.com/library/archive/documentation/QuickTime/QTFF/QTFFChap2/qtff2.html#//apple_ref/doc/uid/TP4939-CH204-BBCEIDFA
>
> libavformat/movenc.c | 13 -
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/libavformat/movenc.c b/libavformat/movenc.c
> index 7db2e28840..31441a9f6c 100644
> --- a/libavformat/movenc.c
> +++ b/libavformat/movenc.c
> @@ -2831,7 +2831,14 @@ static int64_t calc_pts_duration(MOVMuxContext *mov,
MOVTrack *track)
> if (track->end_pts != AV_NOPTS_VALUE &&
> track->start_dts != AV_NOPTS_VALUE &&
> track->start_cts != AV_NOPTS_VALUE) {
> -return track->end_pts - (track->start_dts + track->start_cts);
> +int64_t dur = track->end_pts, delay = track->start_dts +
track->start_cts;
> +/* Note, this delay is calculated from the pts of the first sample,
> + * ensuring that we don't reduce the duration for cases with
> + * dts<0 pts=0. */
If you have a stream starting with dts<0 pts=0, you'll have start_pts =
start_dts + start_cts = 0. That gives delay=0 after your modification. But
the comment says "don't reduce the duration for cases with pts=0" - where
the delay variable would be zero anyway?
I'm not quite sure what you mean - that the comment is outdated?
Or that this modification would perhaps not behave as expected?
Yeah, the comment seems wrong here - it looks like it's been moved along
with the code, but it doesn't really make sense here and/or for the case
you're describing, I think.
For what it's worth, the cases I'm concerned with have start_pts < 0.
I don't manage to follow the reasoning and explanation in the commit
message. To be able to concretely reason about this issue at all, we need
to look at a concrete example. Can you provide a sample input file and a
reproducible command, and point out which exact field in the muxer output
of that case that you consider wrong?
Had to create a trac to find somewhere to host the sample. Tried to put
some details there but the formatting seems messed up and I can't figure
out how to edit, apologies. So here is some more info -
Input sample:
https://trac.ffmpeg.org/raw-attachment/ticket/9028/test-timecode.mp4
Run the following for a transmuxed clip from 3s for a 5s duration:
ffmpeg -ss 3 -i test-timecode.mp4 -t 5 -c copy out.mp4
Note that the actual cut location is mid-GOP, so there's a 1s pts delay
at the beginning of the output file with negative pts.
ffprobe shows:
ffprobe -show_streams -show_format out.mp4 2>&1 | grep duration=
duration=5.166992 # stream duration - correct
duration=6.167000 # format duration - incorrect
mp4dump'ing out.mp4 gives this:
# incorrect: duration should be sum of elst durations
[tkhd] size=12+80, flags=3
duration = 6167
Thanks, I've reproduced this. I'll look closer into it and the suggested
patch and/or other ways of solving it, soon, but please bear with me, I*m
a bit swamped...
// Martin
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
On Fri, 11 Dec 2020 at 14:07, Martin Storsjö wrote:
>
> On Fri, 11 Dec 2020, Josh Allmann wrote:
>
> > A negative start_dts value (eg, delay from edit lists) typically yields
> > a duration larger than end_pts. During edit list processing, the
> > delay is removed again, yielding the correct duration within the elst.
> >
> > However, other duration-carrying atoms (tkhd, mvhd, mdhd) still have
> > the delay incorporated into their durations. This is incorrect.
> >
> > Fix this by withholding delay from the duration if edit lists are used.
> > This also simplifies edit-list processing a bit, since the delay
> > does not need to be removed from the calculated duration again.
> > ---
> >
> > The mov spec says that the tkhd duration is "derived from the track's
> > edits" [1] and the duratons of the other atoms (mvhd, mdhd) are in turn
> > taken from the longest track. So it seems that incorporating the delay
> > into the track duration is a bug in itself when the edit list has the
> > correct duration, and this propagates out tothe other top-level durations.
> >
> > Unsure of how this change interacts with other modes that may expect
> > negative timestamps such as CMAF, so the patch errs on the side of
> > caution and only takes effect if edit lists are used. Can loosen that
> > up if necessary.
> >
> > [1]
> > https://developer.apple.com/library/archive/documentation/QuickTime/QTFF/QTFFChap2/qtff2.html#//apple_ref/doc/uid/TP4939-CH204-BBCEIDFA
> >
> > libavformat/movenc.c | 13 -
> > 1 file changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/libavformat/movenc.c b/libavformat/movenc.c
> > index 7db2e28840..31441a9f6c 100644
> > --- a/libavformat/movenc.c
> > +++ b/libavformat/movenc.c
> > @@ -2831,7 +2831,14 @@ static int64_t calc_pts_duration(MOVMuxContext *mov,
> > MOVTrack *track)
> > if (track->end_pts != AV_NOPTS_VALUE &&
> > track->start_dts != AV_NOPTS_VALUE &&
> > track->start_cts != AV_NOPTS_VALUE) {
> > -return track->end_pts - (track->start_dts + track->start_cts);
> > +int64_t dur = track->end_pts, delay = track->start_dts +
> > track->start_cts;
> > +/* Note, this delay is calculated from the pts of the first sample,
> > + * ensuring that we don't reduce the duration for cases with
> > + * dts<0 pts=0. */
>
> If you have a stream starting with dts<0 pts=0, you'll have start_pts =
> start_dts + start_cts = 0. That gives delay=0 after your modification. But
> the comment says "don't reduce the duration for cases with pts=0" - where
> the delay variable would be zero anyway?
>
I'm not quite sure what you mean - that the comment is outdated?
Or that this modification would perhaps not behave as expected?
For what it's worth, the cases I'm concerned with have start_pts < 0.
>
>
> I don't manage to follow the reasoning and explanation in the commit
> message. To be able to concretely reason about this issue at all, we need
> to look at a concrete example. Can you provide a sample input file and a
> reproducible command, and point out which exact field in the muxer output
> of that case that you consider wrong?
>
Had to create a trac to find somewhere to host the sample. Tried to put
some details there but the formatting seems messed up and I can't figure
out how to edit, apologies. So here is some more info -
Input sample:
https://trac.ffmpeg.org/raw-attachment/ticket/9028/test-timecode.mp4
Run the following for a transmuxed clip from 3s for a 5s duration:
ffmpeg -ss 3 -i test-timecode.mp4 -t 5 -c copy out.mp4
Note that the actual cut location is mid-GOP, so there's a 1s pts delay
at the beginning of the output file with negative pts.
ffprobe shows:
ffprobe -show_streams -show_format out.mp4 2>&1 | grep duration=
duration=5.166992 # stream duration - correct
duration=6.167000 # format duration - incorrect
mp4dump'ing out.mp4 gives this:
# incorrect: duration should be sum of elst durations
[tkhd] size=12+80, flags=3
duration = 6167
# correct
[elst] size=12+16
entry_count = 1
entry/segment duration = 5167
# incorrect; derived from track duration (tkhd)
[mvhd] size=12+96
timescale = 1000
duration = 6167
> // Martin
>
> ___
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-devel] [PATCH] avformat/movenc: Remove dts delay from duration.
On Fri, 11 Dec 2020, Josh Allmann wrote:
A negative start_dts value (eg, delay from edit lists) typically yields
a duration larger than end_pts. During edit list processing, the
delay is removed again, yielding the correct duration within the elst.
However, other duration-carrying atoms (tkhd, mvhd, mdhd) still have
the delay incorporated into their durations. This is incorrect.
Fix this by withholding delay from the duration if edit lists are used.
This also simplifies edit-list processing a bit, since the delay
does not need to be removed from the calculated duration again.
---
The mov spec says that the tkhd duration is "derived from the track's
edits" [1] and the duratons of the other atoms (mvhd, mdhd) are in turn
taken from the longest track. So it seems that incorporating the delay
into the track duration is a bug in itself when the edit list has the
correct duration, and this propagates out tothe other top-level durations.
Unsure of how this change interacts with other modes that may expect
negative timestamps such as CMAF, so the patch errs on the side of
caution and only takes effect if edit lists are used. Can loosen that
up if necessary.
[1]
https://developer.apple.com/library/archive/documentation/QuickTime/QTFF/QTFFChap2/qtff2.html#//apple_ref/doc/uid/TP4939-CH204-BBCEIDFA
libavformat/movenc.c | 13 -
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/libavformat/movenc.c b/libavformat/movenc.c
index 7db2e28840..31441a9f6c 100644
--- a/libavformat/movenc.c
+++ b/libavformat/movenc.c
@@ -2831,7 +2831,14 @@ static int64_t calc_pts_duration(MOVMuxContext *mov,
MOVTrack *track)
if (track->end_pts != AV_NOPTS_VALUE &&
track->start_dts != AV_NOPTS_VALUE &&
track->start_cts != AV_NOPTS_VALUE) {
-return track->end_pts - (track->start_dts + track->start_cts);
+int64_t dur = track->end_pts, delay = track->start_dts +
track->start_cts;
+/* Note, this delay is calculated from the pts of the first sample,
+ * ensuring that we don't reduce the duration for cases with
+ * dts<0 pts=0. */
If you have a stream starting with dts<0 pts=0, you'll have start_pts =
start_dts + start_cts = 0. That gives delay=0 after your modification. But
the comment says "don't reduce the duration for cases with pts=0" - where
the delay variable would be zero anyway?
I don't manage to follow the reasoning and explanation in the commit
message. To be able to concretely reason about this issue at all, we need
to look at a concrete example. Can you provide a sample input file and a
reproducible command, and point out which exact field in the muxer output
of that case that you consider wrong?
// Martin
___
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
