[filmscanners] Re: ss4000 not initializing
On 22/04/2008 Bob Geoghegan wrote: > I turned on my SprintScan 4000 for the first time in about a year > today. > The 2 LEDs light up instantly with no flashing from the yellow one > and there > are no motor noises. Check your SCSI and power cable connectors. I'm not sure the 4000 initialises if the SCSI is detached. Otherwise, is the lamp on, visible through the front slot? It should light immediately when you press the power button, and if the bulb is blown I doubt it's going to go through initialisation. -- Regards Tony Sleep http://tonysleep.co.uk Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
[filmscanners] RE: ss4000 not initializing
Thanks, Tony. The lamp comes on immediately with the power button. There's a split-second of what might be a motor but seems more likely to be a relay driven by the power switch. I tried the Polaroid cleaning brush but to no effect. SCSI connectors seem OK and re-seating them also had no effect. It's the same for changing termination status & SCSI ID. For people who've opened up their SS4000s, what did you use to unclip the 4 fasteners on the bottom? Gently working them with a screwdriver looks like one way to go. BOb -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tony Sleep Sent: Tuesday, April 22, 2008 8:55 PM To: [EMAIL PROTECTED] Subject: [filmscanners] Re: ss4000 not initializing On 22/04/2008 Bob Geoghegan wrote: > I turned on my SprintScan 4000 for the first time in about a year > today. > The 2 LEDs light up instantly with no flashing from the yellow one > and there > are no motor noises. Check your SCSI and power cable connectors. I'm not sure the 4000 initialises if the SCSI is detached. Otherwise, is the lamp on, visible through the front slot? It should light immediately when you press the power button, and if the bulb is blown I doubt it's going to go through initialisation. -- Regards Tony Sleep http://tonysleep.co.uk Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
[filmscanners] Re: ss4000 not initializing
On 23/04/2008 Bob Geoghegan wrote: > For people who've opened up their SS4000s, what did you use to unclip > the 4 > fasteners on the bottom? Gently working them with a screwdriver > looks like > one way to go. I haven't done it, no need yet touch wood. But I just flipped mine over and had a look and yes, they look like typical wedge-type clips and a flat bladed screwdriver pushed gently inwards should do it. -- Regards Tony Sleep http://tonysleep.co.uk Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
[filmscanners] Re: ss4000 not initializing
[you may get two replies due to operator error...] Look here: http://pages.videotron.com/tiller/SS4000faults.htm and here: http://www.mail-archive.com/filmscanners@halftone.co.uk/msg20572.html Whether you will find anything to fix is uncertain and there is plenty to break. Stan Bob Geoghegan <[EMAIL PROTECTED]> wrote: > Thanks, Tony. > > The lamp comes on immediately with the power button. There's a split-second > of what might be a motor but seems more likely to be a relay driven by the > power switch. I tried the Polaroid cleaning brush but to no effect. SCSI > connectors seem OK and re-seating them also had no effect. It's the same > for changing termination status & SCSI ID. > > For people who've opened up their SS4000s, what did you use to unclip the 4 > fasteners on the bottom? Gently working them with a screwdriver looks like > one way to go. > BOb > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tony Sleep > Sent: Tuesday, April 22, 2008 8:55 PM > To: [EMAIL PROTECTED] > Subject: [filmscanners] Re: ss4000 not initializing > > On 22/04/2008 Bob Geoghegan wrote: > > I turned on my SprintScan 4000 for the first time in about a year > > today. > > The 2 LEDs light up instantly with no flashing from the yellow one > > and there > > are no motor noises. > > Check your SCSI and power cable connectors. I'm not sure the 4000 > initialises if the SCSI is detached. > > Otherwise, is the lamp on, visible through the front slot? It should light > immediately when you press the power button, and if the bulb is blown I > doubt it's going to go through initialisation. > > -- > Regards > > Tony Sleep > http://tonysleep.co.uk > > > > > > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
[filmscanners] RE: ss4000 not initializing
Thanks, Stan, That gives me an idea what to expect and to not rush at all. Bob -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, April 23, 2008 10:23 PM To: [EMAIL PROTECTED] Subject: [filmscanners] Re: ss4000 not initializing [you may get two replies due to operator error...] Look here: http://pages.videotron.com/tiller/SS4000faults.htm and here: http://www.mail-archive.com/filmscanners@halftone.co.uk/msg20572.html Whether you will find anything to fix is uncertain and there is plenty to break. Stan Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body