Re: filmscanners: LS-30 Auto Ejecting Film Strips
[EMAIL PROTECTED] wrote: The film is wound around a small spool in the back of the strip film holder, and it tends to curl if left in the holder too long. This has nothing to do with the light source. Eek! I just opened it up and had a look. This would be worst with the last couple of frames on a strip. I didn't realise this about the film strip feeder. Rob
Re: filmscanners: LS-30 Auto Ejecting Film Strips
Is it normal for the LS-30 to automatically eject the film from the scanner after a certain amount of time of inactivity? Yes (well, mine does anyway) Peter Marquis-Kyle
RE: filmscanners: LS-30 Auto Ejecting Film Strips
Marc wrote: Is it normal for the LS-30 to automatically eject the film from the scanner after a certain amount of time of inactivity? Yes. Presumably it's to avoid overheating the film. Rob Rob Geraghty [EMAIL PROTECTED] http://wordweb.com
RE: filmscanners: LS-30 Auto Ejecting Film Strips
Is it normal for the LS-30 to automatically eject the film from the scanner after a certain amount of time of inactivity? Yes. Presumably it's to avoid overheating the film. Another reason is that if left in long enough, the colors will degrade, if it's color film that is. I wish scanners would just shut the lamp off after some time that you could pre-set in the software, and/or I could turn it on/off in the software. The SS4k left the lamp on continuously. I know why some do it, because the lamp has warm-up time...
Re: filmscanners: LS-30 Auto Ejecting Film Strips
On Fri, 19 Jan 2001 09:29:57 +1000, Rob Geraghty wrote: Yes. Presumably it's to avoid overheating the film. This reminds me of a question I had recently based on curling comments - I thought the "Coolscan" used LED's which didn't produce much heat? Admittedly even a little heat builds up, but I would think the Nikons are less prone to film heat-up than other scanners. Tim
Re: filmscanners: LS-30 Auto Ejecting Film Strips
On Fri, 19 Jan 2001 09:29:57 +1000, Rob Geraghty wrote: Yes. Presumably it's to avoid overheating the film. This reminds me of a question I had recently based on curling comments - I thought the "Coolscan" used LED's which didn't produce much heat? Admittedly even a little heat builds up, but I would think the Nikons are less prone to film heat-up than other scanners. Admittedly it's not the same as putting the film in front of a projector bulb, but the scanner motors and power supply certainly heat up inside the case. How the Nikons compare with other scanners I don't know - in any case it's a safety feature to avoid accidentally leaving a film strip in the scanner. Rob Rob Geraghty [EMAIL PROTECTED] http://wordweb.com