Re: [Flexradio] Is there a difference between BAL input andMicrophoneinput?
Bob, check your mixer settings. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512 535-5266 FAX512 233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gerald Youngblood Sent: Friday, May 30, 2008 5:50 PM To: 'Robert Cleve'; 'Flexradio' Subject: Re: [Flexradio] Is there a difference between BAL input andMicrophoneinput? The front panel microphone input has 20 dB of gain and the balanced input has unity gain. The frequency response of the two inputs are virtually identical. Gerald Gerald Youngblood, K5SDR President FlexRadio Systems 13091 Pond Springs Rd. #250 Austin, TX 78729 Phone: 512-535-4713 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Cleve Sent: Friday, May 30, 2008 10:44 AM To: Flexradio Subject: [Flexradio] Is there a difference between BAL input and Microphoneinput? While monitoring my transmit audio in my Flex 5000A I have noticed a bit of difference in sound (fidelity?) when using the BAL vs. the front panel Microphone input. Does the BAL input bypass any microphone preamplifier circuitry that may be used by the front panel Mic input? Thanks and 73, Bob, KW4CQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] duty cycle heat
I read with interest the emails about the duty cycle and heat test. As a digital contester, my question is... "Is it better to pop those side panels off" With DDTU giving a realtime temp reading, I interested in: "do the side panels control air flow and IMPROVE temp" or "is the air flow better withOUT the side pannels. - Never forget the "quest" in questions! - Bill H. in Chicagoland webcams at http://76.16.160.118:8080/ Current Weather at http://hhweather.webhop.org ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Is there a difference between BAL input and Microphoneinput?
The front panel microphone input has 20 dB of gain and the balanced input has unity gain. The frequency response of the two inputs are virtually identical. Gerald Gerald Youngblood, K5SDR President FlexRadio Systems 13091 Pond Springs Rd. #250 Austin, TX 78729 Phone: 512-535-4713 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Cleve Sent: Friday, May 30, 2008 10:44 AM To: Flexradio Subject: [Flexradio] Is there a difference between BAL input and Microphoneinput? While monitoring my transmit audio in my Flex 5000A I have noticed a bit of difference in sound (fidelity?) when using the BAL vs. the front panel Microphone input. Does the BAL input bypass any microphone preamplifier circuitry that may be used by the front panel Mic input? Thanks and 73, Bob, KW4CQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] The QST Review
Hello Flexers, Overall, we at FlexRadio felt it was a fair and balanced review. Note that most of the software feature wishes in the article were already available to SVN users at the time the article was written. These will be in the new official release as soon as RX2 changes are frozen. Let me give a great example of how a true Software Defined Radio is different from legacy radios. The QST article commented on how it would be helpful to have buffer settings by mode. Guess what? In the RX2 SVN branch, we have already implemented RX/TX buffer settings by mode for Phone, CW, and Digital. This will merge with the main branch too. Yes, you can use the FLEX-5000 at 100W for RTTY contests. We did aditional thermal testing after the manual was published that allows for full duty cycle operation at 100W. Our testing was done with 100W key down for one hour with thermisters attached to the final transistors. The temperature stabalized after about 20 minutes within a hot but safe range on the finals. The QST article is in error about the fan. It always runs and is virtually silent. The FLEX-5000 and the SDR-1000 will continue to "just keep getting better." 73, Gerald Gerald Youngblood, K5SDR President FlexRadio Systems 13091 Pond Springs Rd. #250 Austin, TX 78729 Phone: 512-535-4713 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sweeney Sent: Friday, May 30, 2008 3:24 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] The QST Review Flex Gurus, The review, among many other things, states " the Flex-5000A is rated at 100W continuous duty on all modes. This is a recent change that reflects the results of additional testing." Is this correct? Last I knew the manual stated 40 watts max continuous. Also, the review sounded as if the fan does not run continuously, only as needed. My fan runs at one speed continuously, even on receive only. Was this changed in later units? What is the highest PA temperature we should allow? I thought 50c was the maximum we should allow the PA to rise to. AFSK ops , and even PSKers , would like to know. I also do 1 watt WSPR mode (K1JT) with amazing results, so temp not an issue there. Overall, I thought the review was fair and balanced. Nothing made me jump up and yell "wrong" .The CW is already much improved with the latest SVN's and good promise to improve yet more. It is a fun tweaking adventure. 73 John, N3WT -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Lee Mushel Sent: Friday, May 30, 2008 1:44 PM To: flexradio@flex-radio.biz Subject: [Flexradio] The QST Review John B. I felt the review gave a more favorable picture of the Flex5000A than I would have expected. I say this as a League life member of some 40 years and one who has been upset with the organization over it's failure to recognize the importance of the technical side of our hobby. The sudden recent mention that our interests do or at least should have a technical basis doesn't make me any less suspicious of many actions in Newington. My personal opinion is that if we Flexers expect a more glowing report then Gerald will have to buy full page advertising on the Inside Front Cover, and both sides of the Back Cover as well as contributing heavily to some aspect of the various building funds. 73 Lee K9WRU ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] The QST Review
Flex Gurus, The review, among many other things, states " the Flex-5000A is rated at 100W continuous duty on all modes. This is a recent change that reflects the results of additional testing." Is this correct? Last I knew the manual stated 40 watts max continuous. Also, the review sounded as if the fan does not run continuously, only as needed. My fan runs at one speed continuously, even on receive only. Was this changed in later units? What is the highest PA temperature we should allow? I thought 50c was the maximum we should allow the PA to rise to. AFSK ops , and even PSKers , would like to know. I also do 1 watt WSPR mode (K1JT) with amazing results, so temp not an issue there. Overall, I thought the review was fair and balanced. Nothing made me jump up and yell "wrong" .The CW is already much improved with the latest SVN's and good promise to improve yet more. It is a fun tweaking adventure. 73 John, N3WT -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Lee Mushel Sent: Friday, May 30, 2008 1:44 PM To: flexradio@flex-radio.biz Subject: [Flexradio] The QST Review John B. I felt the review gave a more favorable picture of the Flex5000A than I would have expected. I say this as a League life member of some 40 years and one who has been upset with the organization over it's failure to recognize the importance of the technical side of our hobby. The sudden recent mention that our interests do or at least should have a technical basis doesn't make me any less suspicious of many actions in Newington. My personal opinion is that if we Flexers expect a more glowing report then Gerald will have to buy full page advertising on the Inside Front Cover, and both sides of the Back Cover as well as contributing heavily to some aspect of the various building funds. 73 Lee K9WRU ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] The QST Review
Hi Lee, Well, I tend to agree with you. ARRL doesn't dare offend it's current advertising base. Look what happened when they took on the antenna advertisers. That said, I thought they were pretty generous in some areas: mainly CW and AGC and NR. IMO, Flex has a long ways to go in these areas and the League could have been much harsher! On the other hand, they certainly could have mentioned how much easier the Panadapter makes it to use a whole band segment or what a pleasure it is to use Flex with the digital modes. very best regards Rob AB7CF On Fri, 30 May 2008 12:44:00 -0500 "Lee Mushel" <[EMAIL PROTECTED]> writes: > John B. > > I felt the review gave a more favorable picture of the Flex5000A > than I would have expected. I say this as a League life member of > some 40 years and one who has been upset with the organization over > it's failure to recognize the importance of the technical side of > our hobby. The sudden recent mention that our interests do or at > least should have a technical basis doesn't make me any less > suspicious of many actions in Newington. My personal opinion is > that if we Flexers expect a more glowing report then Gerald will > have to buy full page advertising on the Inside Front Cover, and > both sides of the Back Cover as well as contributing heavily to some > aspect of the various building funds. > > 73 > > Lee K9WRU > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kb.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > > > Internet Security Software - Click here. http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3mEWrc9B0J26eeV5Unh8wCuNt0MHJjZycfuro6UNDHF6W4P5/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] The QST Review
John B. I felt the review gave a more favorable picture of the Flex5000A than I would have expected. I say this as a League life member of some 40 years and one who has been upset with the organization over it's failure to recognize the importance of the technical side of our hobby. The sudden recent mention that our interests do or at least should have a technical basis doesn't make me any less suspicious of many actions in Newington. My personal opinion is that if we Flexers expect a more glowing report then Gerald will have to buy full page advertising on the Inside Front Cover, and both sides of the Back Cover as well as contributing heavily to some aspect of the various building funds. 73 Lee K9WRU ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] SDR 5k at 192 khz
Harry, Sound like you may want to review your buffer settings on the FLEX-5000 control panel and on the PowerSDR Setup Form -> Audio Tab. Try using 2048 across the board for starters. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, May 30, 2008 12:23 PM To: flexradio@flex-radio.biz Subject: [Flexradio] SDR 5k at 192 khz When I try to connect at 192 khz sampling rate on my 5k, I get a fast motor boating audio in both transmit and receive. This happens on both of my PCs, but does not occur with my SDR 1K Harry W9BR **Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod000302) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] SDR 5k at 192 khz
When I try to connect at 192 khz sampling rate on my 5k, I get a fast motor boating audio in both transmit and receive. This happens on both of my PCs, but does not occur with my SDR 1K Harry W9BR **Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod000302) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] QST REVIEW
Review of the 5000A is online at arrl. Sri if this is old news for you guys. KN1W ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Is there a difference between BAL input and Microphone input?
While monitoring my transmit audio in my Flex 5000A I have noticed a bit of difference in sound (fidelity?) when using the BAL vs. the front panel Microphone input. Does the BAL input bypass any microphone preamplifier circuitry that may be used by the front panel Mic input? Thanks and 73, Bob, KW4CQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Source code to fix PowerSDR Placement
I had changed the code for my own use but if it's of use to anybody else here it is First change the case statements in SetState to the following; case "console_top": this.Top = Int32.Parse(val); FormOnScreen(this); break; case "console_left": this.Left = Int32.Parse(val); FormOnScreen(this); break; case "setup_top": SetupForm.Top = Int32.Parse(val); FormOnScreen(SetupForm); break; case "setup_left": SetupForm.Left = Int32.Parse(val); FormOnScreen(SetupForm); break; case "mem_top": MemForm.Top = Int32.Parse(val); FormOnScreen(MemForm); break; case "mem_left": MemForm.Left = Int32.Parse(val); FormOnScreen(MemForm); break; then add the following new Method to the Console class; void FormOnScreen(Form f) { // Get the bounding rectangle of the windows logical desktop // the one problem with this routine is if one screen is much larger // than another but how many people place there forms across screens! Screen[] screens = Screen.AllScreens; int Left, Top, Right, Bottom; Left = Top = Right = Bottom = 0; for (int i = 0; i <= screens.GetUpperBound(0); i++) { if (screens[i].Bounds.Left < Left) Left = screens[i].Bounds.Left; if (screens[i].Bounds.Right > Right) Right = screens[i].Bounds.Right; if (screens[i].Bounds.Top < Top) Top = screens[i].Bounds.Top; if (screens[i].Bounds.Bottom > Bottom) Bottom = screens[i].Bounds.Bottom; } // if the forms left side is left of the logical desktops left then // set it to the left side of the logical desktop if (f.Left < Left) f.Left = Left; // if the forms right side goes beyond the right side of the logical // desktop then position the form so the right side of the form // coincides with the right side of the logical desktop. else if ((f.Left + f.Width) > Right) f.Left = Right - (f.Width); // if the forms top is above the logical desktops top then // set it to the top of the logical desktop if (f.Top < Top) f.Top = Top; // if the forms bottom goes beyond the bottom of the logical // desktop then position the form so the bottom of the form // coincides with the bottom of the logical desktop. else if ((f.Top + f.Height) > Bottom) f.Top = Bottom - (f.Height); // On initial startup it is the Location property that sets // the position of the form f.StartPosition = FormStartPosition.Manual; Point pt = new Point(f.Left, f.Top); f.Location = pt; } Regards, Bob Ashmore. EI6GDB ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Relationship of sample rate to panadapter bandwith
Hi Can anybody enlighten me as to the relationship between the bandwidth of the panadapter and the audio sample rate I have look at the code but there appears to be some magic numbers used in the calc. any help would be appreciated. Regards, Bob Ashmore. EI6GDB ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] SDR-1000
SAM wrote: Anyone got an late model SDR-1000 for sale, with sound card A friend of mine here in South Africa is looking for one Please mail me with price if you have one for sale Many thanks Dave *** Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. *** ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/