[Flexradio] F-3K filter question.
Does the F-3K use the same filters for 30 and 20 meters? I am getting QRM on 30 meters from another rig here transmitting on 20 meters and am trying to find a solution for that. It has to be a nearly free solution and not transmitting isn't one of the answers. -- Sent from openSUSE Linux 11.3 X64 Regards de KC6KGE. A very happy Flex-3000 user. Skype flamebait Gmail flamebait at gmail dot com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] External Keyer with 5000a
When using an external keyer with the 5000a, the quick start guide says to connect the /dit/ to the tip of the 1/4 inch connector and the /dah/ to the ring while the shield should be connected to the common. Why do we need a three conductor connector when using an external keyer? It would make sense to me to connect the keyer output just to the tip and the sleeve, just like a straight key. The only problem I can see is that the keyer might need diodes on the output lines going to the output jack on the keyer. Brad A. Steffler KE4XJ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Thanks for videos on digi setup, Dudley!
After having trouble with getting PSK set up properly on my new Flex 5000A, I discovered Dudley's videos on the Flex web site about how to do the software settings. And, hooray, it works! I installed com0com per the instructions and got it to work with DigiPan 2.0, making some contacts this afternoon. I love the way the filters can be narrowed down till the QRM disappears. So, many thanks, Dudley for helping me get back on my favorite mode. Bill -- KA6T ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Pan Adapter Spectrum Width
That might work for phone operation, but lacks a lot for CW and even digital use. This is because 10hz from the signal can be too much. Bruce, W8HW The "KEY" to ham radio is CW - Original Message - From: "Chuck ONeal" To: "Lee Mushel" ; "Edwin Marzan" ; ; Cc: ; Sent: Saturday, August 06, 2011 11:57 AM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Hi. FWIW, I always run my 5000 at 192K (with a 28" screen) and would like a little more, up to the width of the band I'm on. I use it to eveluate band activity and identify changes in signals as I rotate my antenna. It shows where the band is open to quickly! I'm primarily a phone operator so I don't need the added resolution available at 48K. Chuck K1KW - Original Message - From: "Lee Mushel" To: "Edwin Marzan" ; ; Cc: ; Sent: Saturday, August 06, 2011 8:14 AM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Talk about personal preference !I fall right between you two guys and I use the same setting for the 3000 with a 22 inch screen and the 5000A with a 32 inch. I am quite happy! Yes, they do look different! 73 Lee K9WRU - Original Message - From: "Edwin Marzan" To: ; Cc: ; Sent: Friday, August 05, 2011 11:44 PM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Interesting how different flexers use their panadaptors. I like using 192k sampling rate on a 24 inch monitor. And I can see all kinds of things!! Thank the folks at Flex for giving us these choices. Edwin Marzan AB2VW Date: Sat, 6 Aug 2011 00:36:53 -0400 From: abrohamn...@gmail.com To: t...@flexradio.com CC: flexradio@flex-radio.biz; gshri...@charter.net Subject: Re: [Flexradio] Pan Adapter Spectrum Width I personally cannot use it if the displayed spectrum is greater than 40KHz, things are just too small for any value. Don't know if its just my personal setup but, from a display perspective, any sampling rate over 48KHz is wasted on me. 73 Neal On Fri, Aug 5, 2011 at 11:10 PM, Tim Ellison wrote: > No, It is always a little less than the sampling rate. > > On Fri, Aug 5, 2011 at 2:25 PM, Gary Shriver > wrote: > > > Pan Adapter Spectrum Width > > > > I own a Flex 3K and I could swear that the pan adapter's spectrum > > width > is > > less than before I updated PowerSDR. As I am looking at it now, the > > far > > left hand border is 3.800 and the far right hand border is 3.880. > > Shouldn't > > it be 3.896? Hummm? If it should, what should I check? > > > > > > Thanx > > Gary > > > > > > > > ___ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > > http://www.flexradio.com/ > > > > > -Tim > -- > Tim Ellison, W4TME > Internet Systems Admin. & Customer Support Engineer > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com > Web: www.flexradio.com > > [image: logo] > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > -- Abroham Neal Software www.abrohamnealsoftware.com Work:(540) 645 5394 Mobile:(540) 645 8171 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio System
Re: [Flexradio] Pan Adapter Spectrum Width
Remember, higher sampling rate equals less latency and lower sample rate equals sharper filters. http://kc.flexradio.com/KnowledgebaseArticle50310.aspx?Keywords=sample+rate+and+latency 73 Ross K9COX ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Pan Adapter Spectrum Width
Hi. FWIW, I always run my 5000 at 192K (with a 28" screen) and would like a little more, up to the width of the band I'm on. I use it to eveluate band activity and identify changes in signals as I rotate my antenna. It shows where the band is open to quickly! I'm primarily a phone operator so I don't need the added resolution available at 48K. Chuck K1KW - Original Message - From: "Lee Mushel" To: "Edwin Marzan" ; ; Cc: ; Sent: Saturday, August 06, 2011 8:14 AM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Talk about personal preference !I fall right between you two guys and I use the same setting for the 3000 with a 22 inch screen and the 5000A with a 32 inch. I am quite happy! Yes, they do look different! 73 Lee K9WRU - Original Message - From: "Edwin Marzan" To: ; Cc: ; Sent: Friday, August 05, 2011 11:44 PM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Interesting how different flexers use their panadaptors. I like using 192k sampling rate on a 24 inch monitor. And I can see all kinds of things!! Thank the folks at Flex for giving us these choices. Edwin Marzan AB2VW Date: Sat, 6 Aug 2011 00:36:53 -0400 From: abrohamn...@gmail.com To: t...@flexradio.com CC: flexradio@flex-radio.biz; gshri...@charter.net Subject: Re: [Flexradio] Pan Adapter Spectrum Width I personally cannot use it if the displayed spectrum is greater than 40KHz, things are just too small for any value. Don't know if its just my personal setup but, from a display perspective, any sampling rate over 48KHz is wasted on me. 73 Neal On Fri, Aug 5, 2011 at 11:10 PM, Tim Ellison wrote: > No, It is always a little less than the sampling rate. > > On Fri, Aug 5, 2011 at 2:25 PM, Gary Shriver > wrote: > > > Pan Adapter Spectrum Width > > > > I own a Flex 3K and I could swear that the pan adapter's spectrum > > width > is > > less than before I updated PowerSDR. As I am looking at it now, the > > far > > left hand border is 3.800 and the far right hand border is 3.880. > > Shouldn't > > it be 3.896? Hummm? If it should, what should I check? > > > > > > Thanx > > Gary > > > > > > > > ___ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > > http://www.flexradio.com/ > > > > > -Tim > -- > Tim Ellison, W4TME > Internet Systems Admin. & Customer Support Engineer > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com > Web: www.flexradio.com > > [image: logo] > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > -- Abroham Neal Software www.abrohamnealsoftware.com Work:(540) 645 5394 Mobile:(540) 645 8171 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Pan Adapter Spectrum Width
Talk about personal preference !I fall right between you two guys and I use the same setting for the 3000 with a 22 inch screen and the 5000A with a 32 inch. I am quite happy! Yes, they do look different! 73 Lee K9WRU - Original Message - From: "Edwin Marzan" To: ; Cc: ; Sent: Friday, August 05, 2011 11:44 PM Subject: Re: [Flexradio] Pan Adapter Spectrum Width Interesting how different flexers use their panadaptors. I like using 192k sampling rate on a 24 inch monitor. And I can see all kinds of things!! Thank the folks at Flex for giving us these choices. Edwin Marzan AB2VW Date: Sat, 6 Aug 2011 00:36:53 -0400 From: abrohamn...@gmail.com To: t...@flexradio.com CC: flexradio@flex-radio.biz; gshri...@charter.net Subject: Re: [Flexradio] Pan Adapter Spectrum Width I personally cannot use it if the displayed spectrum is greater than 40KHz, things are just too small for any value. Don't know if its just my personal setup but, from a display perspective, any sampling rate over 48KHz is wasted on me. 73 Neal On Fri, Aug 5, 2011 at 11:10 PM, Tim Ellison wrote: > No, It is always a little less than the sampling rate. > > On Fri, Aug 5, 2011 at 2:25 PM, Gary Shriver > wrote: > > > Pan Adapter Spectrum Width > > > > I own a Flex 3K and I could swear that the pan adapter's spectrum > > width > is > > less than before I updated PowerSDR. As I am looking at it now, the > > far > > left hand border is 3.800 and the far right hand border is 3.880. > > Shouldn't > > it be 3.896? Hummm? If it should, what should I check? > > > > > > Thanx > > Gary > > > > > > > > ___ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > > http://www.flexradio.com/ > > > > > -Tim > -- > Tim Ellison, W4TME > Internet Systems Admin. & Customer Support Engineer > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com > Web: www.flexradio.com > > [image: logo] > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > -- Abroham Neal Software www.abrohamnealsoftware.com Work:(540) 645 5394 Mobile:(540) 645 8171 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/