Re: [Flexradio] Eham review - K1EL VLF Converter and its Use with FlexRadios

2013-03-11 Thread Patrick Greenlee
Once upon a time a long time ago in a town far far away (San Diego) I was 
the branch head in charge of SSIXS  (Satellite Submarine Information 
Systems) for FCDSSA (Fleet Combat Direction Systems Support Activity) SSIXS 
is a message store and forward system that provides broadcast content to be 
transmitted via Navy VHF/UHF SATCOM to be received by submarines at sea (Two 
way capability.)  SSIXS also provides one way broadcast message traffic to 
the VLF keying site to send low data rate messages to submerged subs 
trailing long wire antennas as deep as 60 ft.  It is not at all unusual to 
have these VLF transmissions received from nearly any location depending on 
conditions and your receiving situation. Expect the transmissions to be 
encrypted. Oh, by the way... The British Royal Navy has a version of our 
software that we sold to them and maintain and they operate their own 
transmission sites.


For more info I suggest Jane's.

Patrick AF5CK


-Original Message- 
From: Jim Barber

Sent: Sunday, March 10, 2013 7:14 PM
Cc: Flex Radio
Subject: Re: [Flexradio] Eham review - K1EL VLF Converter and its Use with 
FlexRadios


Interesting.
Probably lots of silence and nav beepings out here on the west coast, tho.

73,
Jim N7CXI

On 3/10/2013 2:13 PM, Ken Alexander wrote:

Hi Terry,

There are sixteen longwave broadcast frequencies between 153 kHz and 279 
kHz, spaced 9 kHz apart (except for 177 and 183, which have remained on 
some older layout). Several of the stations are reasonably strong here in 
Ontario (I'm in Newmarket) but less so than most shortwave broadcasters. 
All stations broadcast in their local languages, so you'll only find 
English on 198 kHz (BBC) and 252 kHz (Ireland).


When conditions are good and quiet (low K-Index) then the band wil open up 
a little and you can hear multiple stations on each frequency and weaker 
stations from eastern Europe and Russia fading in.


In addition to broadcasters there are Navtex weather broadcasts to 
shipping on 518 kHz, and DGPS (differential GPS) stations that support 
shipping navigation.  There are time stations on 60 kHz and 77 kHz and 
naval communications in encrypted digital modes down even lower.



I have had good luck with my Flex-1500 and a 500 kHz lowpass filter I 
built to keep the mediumwave broadcasters out.  I use a 6 ft diameter 
active loop antenna, which provides good reception.


73,

Ken Alexander
VE3HLS




  From: Terry Maurice ve3...@execulink.com
To: Lee Mushel herbe...@centurytel.net
Cc: vtnn...@comcast.net; Flex Radio flexradio@flex-radio.biz
Sent: Sunday, March 10, 2013 4:20:40 PM
Subject: Re: [Flexradio] Eham review - K1EL VLF Converter and its Use with 
FlexRadios


Interesting, comments on the K1EL converter and its use with the Flex 
radios.


A question for those who have listened on the VLF bands.  Is there much in 
the way of activity there, other than beacons?  I know that these 
frequencies are used in Europe for commercial broadcasting, but are these 
signals receivable in North America other than in coastal areas?


Any comments would be appreciated.

Thanks

Terry

On 09/03/2013 14:46, Lee Mushel wrote:

Zack,

I certainly wish I had known about the K1EL a few years ago when I first 
applied for membership in the MF Experimental Group.   I had one of the 
first Flex5000As and I thought that with a resource like that plus 
virtually unlimited space for an antenna that I would be able to make a 
contribution to this effort.   And I hurriedly put up a 1,500 ft. 
beverage and assembled a 12 ft. dia. loop as well.   As is indicated in 
the review you mention, I slowly and painfully learned about things like 
lack of sensitivity at low frequencies of the 5000A and what broadcast 
band images were along with the nature of filters and a lot of other 
stuff as well!  I had put together K1ELs keyer but somehow had managed 
to miss the existence of his converter! I do hope that your posting will 
save a lot of fellows the pain I went through since 500 kHz surely isn't 
anything like 80 meters!


73

Lee  K9WRUWD2XSH-32
- Original Message - From: vtnn...@comcast.net
To: Flex Radio flexradio@flex-radio.biz
Sent: Saturday, March 09, 2013 12:45 PM
Subject: [Flexradio] Eham review - K1EL VLF Converter and its Use with 
FlexRadios



Found an interesting review by K0OD about using the K1EL systems VLF 
converter with a Flex-5000.

http://www.eham.net/reviews/detail/5541
K1EL http://www.k1el.com/
73
Zack
N8FNR





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/




-- *VE3XTM* EN93un

May the propagation be with you.
___
FlexRadio Systems Mailing List

[Flexradio] Eham review - K1EL VLF Converter and its Use with FlexRadios

2013-03-11 Thread vtnn43e


Now if only someone comes out with a transverter (Elecraft would be nice) once 
we get the VLF allocation things would get very interesting. 

Zack 

N8FNR 
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


[Flexradio] output on FlDigi

2013-03-11 Thread Johnnie Spotts
I am on FlDigi, when I transmit I hear the relay change, but only show one watt 
out. On Flex tune i get 40 watts out.
what do I have set wrong.
Johnnie, W6HTY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/