[Flexradio] BPSK split and up operation
I have been watching the 20 meter, digital, W1AW ops and think I have things correct to work split and up a little while using digital mode BPSK31…. what I have done: normal ops work and have worked, so I select split, then AB, then adjust the last 3 digits of the VFO B frequency - based on the desired transmit freq…. and operate.. is that correct? is there a better way? thanks in advance dave dabay kd...@twlakes.net ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Upgrade my flex computer to Windows 7
I would like to upgrade the hard drive and also change from XP to Windows 7 in the computer that I use for my Flex 3000. (I am currently using PowerSDR 2.7.2 on the XP machine.) I am comfortable with computer upgrades but I have never installed my 3000 on any other computer, and just to be sure that I don't mess anything up could someone advise if the following steps are correct. 1.. Copy my existing PowerSDR database to a thumb drive. 2.. Change out the hard drive and install and setup Windows 7. 3.. Run the 2.7.2 integrated installer. 4.. Reboot 5.. Connect the Flex 3000 to the computer and then turn it on. 6.. Start PowerSDR. 7.. Import the original database from the thumb drive (I am assuming I can do this since it is from the same version of PowerSDR.) 8.. I am also assuming that the software will detect that the firmware in the radio had been previously upgraded when 2.7.2 was installed on the XP machine. One of my concerns is that I don't want to mess up the firmware in the radio. Also if needed, would I be able to switch out the hard drives and go back to the XP installation and still use the Flex 3000? Thanks in advance for looking at this and for any comments/suggestions. Todd K1OD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] MicroHam DB37 diagram for flex-6x000 series
Hi Guys, I make a wire diagram, thanks to WO2X Dave for support. https://www.dropbox.com/s/7cnbpmyd6pz5uv5/DB37-flex6x000.pdf If you need attach a MicroHam Microkeyer2 to your Flexradio you can by a DB-15 and you can use DVK, CW Keyer. Best 73 de IZ7AUH Frank Francesco GIACOIA, IZ7AUH | AK1CQ Via F. di Palma 134 – 74123 Taranto - Italy email he...@iz7auh.com | giac...@me.com | iz7...@armi.ta.it | iz7...@aritaranto.it web http://www.iz7auh.com | http://www.dxgadget.com | http://www.giacoia.it Secretary of ARI Taranto | DX Italia Supporter | ARMI #097 | AMSAT Italia #357 | NCDXF | EPC #08084 | 30MDG #3202 | DMC #871 | BS #551 | MDXC #877 Follow Me! Facebook http://www.facebook.com/iz7auh Twitter http://twitter.com/#!/IZ7AUH YouTube http://www.youtube.com/iz7auh ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] MicroHam DB37 diagram for flex-6x000 series
Frank: Thanks for posting the diagram. I too have completed building a full set of cables for the MicroHam MK-2R+. We've tested all of the hardware, keying, and audio interfaces but I'm having difficulties with the Virtual Serial interface working with our SmartCAT. It may just be me.. Have you been successful with controlling your FLEX-6000 from the MK-2? Thanks for any information. 73, Greg - K5GJ On Wed, Mar 5, 2014 at 1:27 PM, Frank, IZ7AUH iz7...@gmail.com wrote: Hi Guys, I make a wire diagram, thanks to WO2X Dave for support. https://www.dropbox.com/s/7cnbpmyd6pz5uv5/DB37-flex6x000.pdf If you need attach a MicroHam Microkeyer2 to your Flexradio you can by a DB-15 and you can use DVK, CW Keyer. Best 73 de IZ7AUH Frank Francesco GIACOIA, IZ7AUH | AK1CQ Via F. di Palma 134 - 74123 Taranto - Italy email he...@iz7auh.com | giac...@me.com | iz7...@armi.ta.it | iz7...@aritaranto.it web http://www.iz7auh.com | http://www.dxgadget.com | http://www.giacoia.it Secretary of ARI Taranto | DX Italia Supporter | ARMI #097 | AMSAT Italia #357 | NCDXF | EPC #08084 | 30MDG #3202 | DMC #871 | BS #551 | MDXC #877 Follow Me! Facebook http://www.facebook.com/iz7auh Twitter http://twitter.com/#!/IZ7AUH YouTube http://www.youtube.com/iz7auh ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Greg Jurrens - K5GJ VP, Sales and Business Development FlexRadio Systems 4616 W Howard Lane Ste 1-150 Austin, TX 78728 T: 512-535-4713 x203 E: g...@flexradio.com Tune in Excitement (tm) PowerSDR(TM) and SmartSDR(TM) are trademarks of FlexRadio Systems(R) Web: www.flexradio.com http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Upgrade my flex computer to Windows 7
Todd: That looks like an appropriate path to take. There are actually a few other files if you use memories: master.xml and memory.xml These are both located at: %appdata%/FlexRadio Systems(Note that this is a symlink that will get you right to YOUR specific file store area.) Good luck 73, Greg - K5GJ On Wed, Mar 5, 2014 at 1:15 PM, Todd Stolzberg stol...@att.net wrote: I would like to upgrade the hard drive and also change from XP to Windows 7 in the computer that I use for my Flex 3000. (I am currently using PowerSDR 2.7.2 on the XP machine.) I am comfortable with computer upgrades but I have never installed my 3000 on any other computer, and just to be sure that I don't mess anything up could someone advise if the following steps are correct. 1.. Copy my existing PowerSDR database to a thumb drive. 2.. Change out the hard drive and install and setup Windows 7. 3.. Run the 2.7.2 integrated installer. 4.. Reboot 5.. Connect the Flex 3000 to the computer and then turn it on. 6.. Start PowerSDR. 7.. Import the original database from the thumb drive (I am assuming I can do this since it is from the same version of PowerSDR.) 8.. I am also assuming that the software will detect that the firmware in the radio had been previously upgraded when 2.7.2 was installed on the XP machine. One of my concerns is that I don't want to mess up the firmware in the radio. Also if needed, would I be able to switch out the hard drives and go back to the XP installation and still use the Flex 3000? Thanks in advance for looking at this and for any comments/suggestions. Todd K1OD ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Greg Jurrens - K5GJ VP, Sales and Business Development FlexRadio Systems 4616 W Howard Lane Ste 1-150 Austin, TX 78728 T: 512-535-4713 x203 E: g...@flexradio.com Tune in Excitement (tm) PowerSDR(TM) and SmartSDR(TM) are trademarks of FlexRadio Systems(R) Web: www.flexradio.com http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
