[Flexradio] 2.1.5 Crashing problem solved
Version 2.0.22 works fine with my flex 5000 but 2.1.5 generates a crash window every time I load it. It still worked but closing the crash report window closed the software. After a lot of trouble shooting the problem appears to be the auto detect in the flex control menu. Unchecking that checkbox removed the crash report window. I' m posting this in case someone else is experiencing the same problem. Jon W2WB ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] (no subject)
Another question about the ATU/F5K. I have an antenna connected through an external ATU. It's set for 1:1 SWR and when I put an antenna analyzer on the connected lead that would go to the F5K it shows a 1.0 SWR and 50 ohm impedance but when I try to use the antenna I get a high SWR warning. The internal ATU is on bypass but when I try to tune with it, it can't get a match. Jon Valdina W2QYO ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] RX2 RF Switching
I noticed that also as I have Ant2 connected but don't get an Ant2 choice in the dropdown list for RX2 ??? Jon Valdina W2QYO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of bockert Sent: Monday, June 30, 2008 12:58 PM To: flexradio@flex-radio.biz Subject: [Flexradio] RX2 RF Switching Good Morning, Last week I got RX2 installed. Installation was a breeze and it seems to work well. My question is concerning the RF Switching options available for RX2. The pull down shows only "RX2 IN" and RX1 Tap" as options. Is this a limitiation of the hardware or of the software? If it is a limitation of the hardware it is a fairly severe limitiation on the usefullness of RX2... even something as simple as monitoring 6M (with the intent of operating there if something is heard) while operating on another band is going to require some form of external switching to implement. 73 de Bill WB0VHW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Laptop vs Desktop
Is there anything in the Flex 5000A itself that is loaded from the computer. In other words can I run it from both my laptop or desktop as long as I use the same version PowerSDR/Drivers in both or is that even critical as long as the firmware is compatible. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/