Ahti Aintila wrote:
Is this a bug or a new feature? The Level Calibration of the preview
18 with -70 dBm signal gives me following signal levels on the
Spectrum display with different preamp gains:
Off: -70 dBm
Low: -80 dBm
Med: -70 dBm
High: -80 dBm
If I transfer the mdb-file from the version 1.4.5.16, all gain
settings show the same -70 dBm.
73, Ahti OH2RZ
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
I had a similar problem. Very difficult to calibrate the receiver. It
would not calibrate at all on 14.200. I finally manage to calibrate it
on 7 MHz. It seemed to try to use the noise level as the source.
Consequently the noise level would be at -70 dbm, or -80 dbm depending
on what the preamp was set at and the signal 73 dbm above that.
73,
Dale AA5XE
--
Government is not reason, it is not eloquence, it is force...Never for a moment
should it be left to irresponsible action.
– George Washington
