Re: [Flexradio] 144-28FRS - problem solved
David, Glad that you got it figured out. For the record, you will want to use either the Setup Form XVTR Present checkbox OR the XVTR Form setup, but not both as this will cause considerable confusion for the software. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of David Hilton-Jones > Sent: Sunday, February 18, 2007 7:08 AM > To: flexradio > Subject: [Flexradio] 144-28FRS - problem solved > > Sorry for the bandwidth - problem solved! It was a hardware fault - a > duff power connection to the transverter board. Now all functioning Ok. > > 73 > > David, G4YTL ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] 144-28FRS - problem solved
Sorry for the bandwidth - problem solved! It was a hardware fault - a duff power connection to the transverter board. Now all functioning Ok. 73 David, G4YTL ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] 144-28FRS Problem
I apologise in advance for this posting, and realise I should wait until tomorrow to discuss with the supplier, but my impatience to get going got the better of me! I took delivery of a SDR-1000 (1 watt version) a few days ago and am up and running on HF. The suppliers (Waters and Stanton - who have given excellent service) installed the 144-28FRS. I can not hear anything through it, or get any 144MHz RF out of it. I appreciate that a likely possibility is that I am doing something wrong, but can't see what that is. I will check with W&S tomorrow that they tested it live before dispatch, and just possibly there is a hardware problem. On Set-up I've told it that the transverter is installed. On XVTRs I have enabled the first line, UCB 0, Button text 144, LO offset 116.0, LO error 0, Begin Freq 144, End Freq 146, Rx gain 0. When I transmit the signal meter says there is power output, but there is nothing on 144MHz - but there is output at 28MHz on the appropriate frequency from the QRP socket. I am using the Parallel-USB converter. Many thanks David, G4YTL ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/