[Flexradio] Help with Digital Mode and Hamscope
DUH...you have to turn up the TX gain on the Digital Specific controls on the front control panel. I tested the unit again with a lower reading watt meter and found a small amount of RF going out. Then I boosted the TX gain control and "voila" have output. Band conditions are so bad at the moment, I can't get an "on air" test. Sorry about the bandwidth. Doug, VA3CR www.va3cr.net ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Help with Digital Mode and Hamscope
I cannot get my SDR-1000 to transmit on digital. It receives, the rig will key up, and a signal is showing on Hamscope, but there is no drive to the radio nor RF out. My setup is: Edirol, VAC, NV8Com, TRX Manager as logging program that Hamscope uses to key the rig. I have tried the same thing with MIXw and have exactly the same results. It's probably something very simple, but at the moment I can't see the problem. Frustrated in Canada Doug, VA3CR www.va3cr.net ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
