Dave, I am not sure about any adjustment, but there is an excellent
display of the "ADC-L dBFS" and "ADC-R dBFS" values in the Rx Meter at
the top right of the PowerSDR Console display. Check those levels and
you will find that they are +/- 1db of each other. Perhaps the Audio
Test is giving you a difference in level, but that the actual I and Q
signals (ADC-L and ADC-R) are properly balanced.
Ken
[EMAIL PROTECTED] wrote:
> ZS6AVM Wrote:
>
> This is something which I've been meaning to ask for a long time now,
> and kinda keep forgetting to do so
> When running the "Audio Test" in the Test Menu, I find that one channel
> is louder than the other
> I wonder if this is a sound card issue, or if there is some way of
> equalising the audio levels in the left and right channels
> I've looked in the Delta 44 setup, and don't seem to see an obvious way
> that this can be done
> Perhaps left and right audio levels equalisation could be some how
> programmed in PowerSDR ?
> Any thoughts on this one
>
> Best regards
>
> Dave
> ZS6AVM
>
> ***
>
>
> Disclaimer: The information contained in this communication is confidential
> and may be legally privileged.
>
> It is intended solely for the use of the individual or entity to whom it is
> addressed and others authorised to receive it.
>
> Any review, retransmission, dissemination, copying, disclosure or other use
> of, or taking of any action in reliance upon, this information by person or
> entities other then the intended recipient is prohibited.
>
> If you have received this message in error, please notify the sender
> immediately by e-mail, facsimile or telephone and return and/or destroy the
> original message and all copies from any computer.
>
>
> Denel (Pty) Ltd exercises no editorial control over e-mail messages
> originating in the organisation and does not accept any responsibility for
> either the contents of the message or any copyright laws that may have been
> violated by the person sending this message.
>
> Denel (Pty) Ltd is neither liable for the proper and complete transmission of
> the information contained in this communication nor any delay in its receipt.
>
> This message should not be copied or used for any purpose other than
> intended, nor should it be disclosed to any other person.
>
> ***
>
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070119/6d54a340/attachment.html
>
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com/
>
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
>
>
--
Flex-Radio Customer Support
(1-512-250-8595)
---
The answer to your question can be found
in the wonderful new Knowledge Base
Please use it frequently
http://kb.flex-radio.com/
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/
FlexRadio Knowledge Base: http://kb.flex-radio.com/