Sounds like an issue in the database with the bandstack registers. Do a database reset and see if that clears things up.
-Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of bobt Sent: Sunday, March 14, 2010 11:21 AM To: flexradio@flex-radio.biz Subject: [Flexradio] default frequency when switching band Hi to the group, I have a minor problem which is more of a puzzle than anything else. It didn't happen before I upgraded to 1.18.15 so I could do with a little inspiration. I am running a 5000A with 71.71 and 1.18.15 and Vista. What happens is that when I change bands to 20M the rig always switches to 14.230Mhz no matter what I was on when I switched to another band from 20M. It doesn't do it on any other band just this one. If I switch off from 20M and switch on again then fine it comes back at the same freq as I switched off , but as soon as I switch to an other band and back to 20M I end up on 14.230Mhz. Politely HELP ! Regards Bob Townsend ZS6BXI -- This message has been scanned for viruses and dangerous content by Pinpoint, and is believed to be clean. _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
