Re: FM - tags and text boxes
Hi Merry On 7/11/06, Merry Foxworth [EMAIL PROTECTED] wrote: Another issue I have is the text boxes outlined by dotted lines. How does one change them? I would have thought it was possible when you switch the View to Master Pages but I don't see how. Is the problem that you do not want to see the dotted lines at all? Select View in the menubar. On the submenu, you probably have Borders checked. Select Borders to remove the checkmark. The dotted lines vanish. The text frame for the body text for your Body page is located on the Master Page if you need need to follow the instructions from Rebecca Officer about editing. You will also get dotted lines from anchored frames, for example, but they are on your Body page if they are created there. Checking or unchecking Borders makes them visible or invisible no matter where they are. If you are asking whether you can change the look of the dotted lines (to a solid line for example), I don't believe you can. Others may have a comment about this. Hope this helps a bit more. BTW If you can get a copy of Adobe's Classroom in a Book for 5.5, that should be quite useful. It is an excellent starting point for new FrameMaker users - at least, that was my personal experience. regards, Karen ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
William Weiss is out of the office.
I will be out of the office starting 07/11/2006 and will not return until 07/19/2006. I will respond to your message as quickly as possible upon my return. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: FM - tags and text boxes
Karen, Thanks for your reply, but no, I am not asking about how to change the look of the dotted lines, because they don't show up on the final copy (at least I don't think they do). I am asking about how to manipulate, i.e. resize, them. I would rather see them so I know where they are. I will look for that book you mentioned in a used book shop near here. btw, you don't have to send me a message and then the same message to the list, because I will see it there, and it will avoid my getting duplicate messages. I would just delete the one, but I am not sure whether you are telling me something different than what you are telling the list until I actually open both. --- Karen Mardahl [EMAIL PROTECTED] wrote: ´¨¨)) -:¦:- ¸.·´ .·´¨¨)) ((¸¸.·´ ..·´ -:¦:- An excerpt from Robert Giddings Musical Quotes and Anecdotes, published in Longman Pocket Companions: There let the pealing organ blow, To the full-voiced choir below, In service high, and anthems clear, As may with sweetness, through mine ear, Dissolve me into ecstasies, And bring all Heav'n before mine eyes. John Milton - Il Penseroso (1632). __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Expressing Fractions with Offset Numbers and Division Symbols
Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ¾). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 [EMAIL PROTECTED] http://www.kvh.com The information contained in this electronic mail transmission is intended by KVH Industries for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: Expressing Fractions with Offset Numbers and Division Symbols
First of all, you should use the fraction slash by typing Control+q Shift+z. Then you can apply character formats to the numerator and denominator. The numerator format will use the Superscript position and the denominator format will use the Subscript position. You set the specifications for superscript and subscript globally in a document by using Format Document Text Options. The problem comes if you have other superscripted and subscripted characters in the document that should have different sizes or positions. However, this limitation can be overcome with FrameScript. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ¾). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 [EMAIL PROTECTED] http://www.kvh.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: Expressing Fractions with Offset Numbers and Division Symbols
Here are some other solutions: You can buy dedicated fraction fonts from Adobe, Monotype, and others. They will usually match a particular typeface; for example, Helvetica Fractions matches Helvetica. Or, if you use a typeface that has a corresponding Expert set, you can use the Expert font for the fractions. For example, I have Plantin, which has an expert font called Alt Figures. It contains each number in both numerator and denominator sizes and positions. The advantage to these numbers is that their weight is boosted so that don't look lighter than the surrounding characters, even though they are smaller. Its fraction slash is accessed by typing a normal forward slash. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ¾). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 [EMAIL PROTECTED] http://www.kvh.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: FM - tags and text boxes
Hi Merry On 7/11/06, Merry Foxworth [EMAIL PROTECTED] wrote: Karen, Thanks for your reply, but no, I am not asking about how to change the look of the dotted lines, because they don't show up on the final copy (at least I don't think they do). I am asking about how to manipulate, i.e. resize, them. I would rather see them so I know where they are. Nope, they won't show up in the final copy. They are only there for your editing convenience. Showing or hiding Borders makes the frames visible so you know where they are. Rebecca gave you the manipulating details. I will look for that book you mentioned in a used book shop near here. Another tip: www.abebooks.com - if your local shop doesn't have it - or they can order from there, if they belong to ABE. btw, you don't have to send me a message and then the same message to the list, because I will see it there, and it will avoid my getting duplicate messages. I would just delete the one, but I am not sure whether you are telling me something different than what you are telling the list until I actually open both. Sorry about that! I meant to answer to the group (knowledge sharing, etc.). First reply went just to you, so I just sent it again - this time to the group. Apologies about the duplication. regards, Karen Mardahl ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: FM - tags and text boxes
Merry, Do you have access to the Frame manual set and/or the online help and doc? Supplemental manuals are usually in C:\Program Files\Adobe\FrameMaker7.2\OnlineManuals It's a good starting point for learning about the program... Art On 7/10/06, Merry Foxworth [EMAIL PROTECTED] wrote: Again, thanks to several of you, especially those who told me about Ctrl - M. As you all can probably tell, I am new to FrameMaker. Another issue I have is the text boxes outlined by dotted lines. How does one change them? I would have thought it was possible when you switch the View to Master Pages but I don't see how. -- Art Campbell [EMAIL PROTECTED] ... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl. -- Richard Thompson No disclaimers apply. DoD 358 ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
OT: oxygenXml/ promotion
Hi all: If any of you are looking at Oxygen XML (http://www.oxygenxml.com/) please let me know before you commit. I have a promotional offer that allows people to save another 15%. I'm not making anything off it. However, our company presents and shows this and more at conferences (we'll be at TriXML [http://conf.travelthepath.com], Doctrain [http://www.doctrain.com] and Lavacon [http://www.lavacon.org]). SyncRO Soft wanted me to extend an offer to people who attend the conferences or courses that I teach. I thought I'd forward the offer early to anyone who can benefit from it. I'm sending this to several list servers, but please email me directly if you want the promo code to keep the email volume down. Thanks in advance, Bernard Bernard Aschwanden Publishing Technologies Expert Publishing Smarter [EMAIL PROTECTED] www.publishingsmarter.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Adobe announces FrameMaker DITA Application Pack
In a webinar today, Adobe announced and demoed the FrameMaker DITA Application Pack, an extension to FrameMaker that adds full DITA support to FrameMaker 7.2. Adobe did ship a DITA structured application with FrameMaker 7.2, but the application pack adds much more functionality, including a DITA menu, support for maps, relationship tables, conrefs, and ID generation. There will be online help and installation instructions. Based on what I saw of the demo, this will make it much easier to author DITA-based content in structured FrameMaker. For example, if you add a topic reference to a map and the topic doesn't already exist, FrameMaker will create the topic and assign it a unique ID. If you double-click on a topic in a map, the topic opens for editing. If you create a conref to an element that doesn't have an ID, FrameMaker will generate the ID for you. The Application Pack will be freely available for downloading by FrameMaker 7.2 users. It'll be in open beta in August, with a full release sometime later (no specific date was given). Adobe will also be releasing an S1000D Starter Kit, with will provide similar functionality for the S1000D users. This is exciting news for both FrameMaker users and DITA devotees. It's clear that Adobe is finally devoting more development and marketing resources to FrameMaker. It will also make it easier for writers like myself, who don't have the resources of a documentation group with XML wizards on staff, to adopt structured authoring and DITA. On a related front, they did say that there will be more FrameMaker webinars in the fall. They will make the first three webinars, including today's, available for online viewing sometime soon. Regards Keith ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: FM - text boxes
When I switch to Master Pages, the dotted boxes look different from those in Body Pages, so there is no point in even trying to change them. I have no idea how one works with them. As someone pointed out, 5.5 is a pretty old version and doesn't have the same level of support. First, back your file up before you play with text frames on Master pages. You can get unexpected results. I guess so!!! Another issue I have is the text boxes outlined by dotted lines. How does one change them? I would have thought it was possible when you switch the View to Master Pages but I don't see how. ´¨¨)) -:¦:- ¸.·´ .·´¨¨)) ((¸¸.·´ ..·´ -:¦:- An excerpt from Robert Giddings Musical Quotes and Anecdotes, published in Longman Pocket Companions: There let the pealing organ blow, To the full-voiced choir below, In service high, and anthems clear, As may with sweetness, through mine ear, Dissolve me into ecstasies, And bring all Heav'n before mine eyes. John Milton - Il Penseroso (1632). __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: Cross-references to Figure/Table captions work in FM, but not in PDF
Hi John - I have no explanation but I do have a possible solution. When crerating the PDF, turn on Create Named Destinations. You shouldn't have to do this for internal xrefs but it solved the problem for a client of mine. Pat Christenson On Jul 11, 2006, at 2:52 PM, John Posada wrote: Hi, guys...something weird. I place Figure and Table numbers in my FM 7.2 documents by cross-referencing to the figure or table caption. The captions are composed acording to the following: F:Figure n+:\ T:Table n+:\ When I CTRL ALT Mouseover, in the FM document, the link works fine. I can click the FM X-ref and it goes to the figure or table caption. The X-ref T markers appears in the captions just like they should. However, when I convert to PDF using version 7.0 (Distiller 7.0.5) (Save As - PDF) (PDF version 1.3 (Acrobat 4.0), all the types of links work in the document except for Figure or Table X-Refs. When I place the cursor over the Fig or Table X-Refs, it turns to a pointy hand as it should, the whole X-ref string turns reverse video when I click as it should, but nothing happens. I even tried applying the complete range of X-ref formats to the cross reference just to see if it was because of a x-ref format, but they all act the same. Anyone know what might be happening? John Posada Senior Technical Writer I think the problem, to be quite honest with you, is that you've never actually known what the question is. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/ pxenson%40comcast.net Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: FM - text boxes
You can change the text frames on the Master pages till they're the way you want them to be, then force the body pages to use them. To do this, in Body page view, select Format menu Page layout Master Page Usage). But definitely save first! Cheers, Rebecca Merry Foxworth [EMAIL PROTECTED] 12/07/06 09:23 When I switch to Master Pages, the dotted boxes look different from those in Body Pages, so there is no point in even trying to change them. I have no idea how one works with them. As someone pointed out, 5.5 is a pretty old version and doesn't have the same level of support. First, back your file up before you play with text frames on Master pages. You can get unexpected results. I guess so!!! Another issue I have is the text boxes outlined by dotted lines. How does one change them? I would have thought it was possible when you switch the View to Master Pages but I don't see how. ´¨¨)) -:|:- ¸.·´ .·´¨¨)) ((¸¸.·´ ..·´ -:|:- An excerpt from Robert Giddings Musical Quotes and Anecdotes, published in Longman Pocket Companions: There let the pealing organ blow, To the full-voiced choir below, In service high, and anthems clear, As may with sweetness, through mine ear, Dissolve me into ecstasies, And bring all Heav'n before mine eyes. John Milton - Il Penseroso (1632). __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/rebecca.officer%40alliedtelesyn.co.nz Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Technical Writer - Contract - Dallas, TX
TW-890 Technical Writer - Contract - Dallas, TX Rate: BOE Length - 4 - 6 months A leading manufacturer of device and application management software HQ'ed in Plano needs a tech writer with end user documentation experience. Requirements: o. 5 - 10 years experience writing end user documentation (Required) o. FrameMaker (Required) o. Experience writing API guides (Preferable but not a must) o. Experience with VMS (WMI) a plus o. Experience with WBEM/DMTF a plus Notes: o. Authorized US workers only. o. Local candidates only. o. After getting grooved in you can work from home and come in once a week or more if needed. o. To be considered, apply for job TW-890 via the ProSpring jobs page at: www.prospring.net/jobs.php ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: oxygenXml/ promotion
Actually, the Tri-XML conference for XML users is at http://www.trixml.org/confindex.shtml -Original Message- From: Bernard Aschwanden Hi all: If any of you are looking at Oxygen XML (http://www.oxygenxml.com/) please let me know before you commit. I have a promotional offer that allows people to save another 15%. I'm not making anything off it. However, our company presents and shows this and more at conferences (we'll be at TriXML [http://conf.travelthepath.com], Doctrain [http://www.doctrain.com] and Lavacon [http://www.lavacon.org]). SyncRO Soft wanted me to extend an offer to people who attend the conferences or courses that I teach. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
FM - tags and text boxes
Hi Merry First, back your file up before you play with text frames on Master pages. You can get unexpected results. Also, remember that changing the text frame on a master page changes it for all pages that use that master page. You can change single body pages (in the same way as I describe below for master pages), but it's better to avoid doing so. If you do change a body page, that change is tied to the page number, *not* the content of the page, so you have to do it just before publication. So, on your master page, hold down the Ctrl key and click inside a box. That selects that text frame. Then you can drag it to move it, drag the handles to resize it, delete it, or use the menu option Format > Customise layout > Customise text frame to control it. To select multiple frames, Ctrl-click in each in turn. To deselect frames, click somewhere on the page outside the frame. You can also copy a selected frame/s, go to another master page, and paste the selected frame/s into the page. That can be a quick way to get consistency. Cheers, Rebecca >>> Merry Foxworth 11/07/06 14:06 >>> Again, thanks to several of you, especially those who told me about Ctrl - M. As you all can probably tell, I am new to FrameMaker. Another issue I have is the text boxes outlined by dotted lines. How does one change them? I would have thought it was possible when you switch the View to Master Pages but I don't see how. I found a tutorial online but I am not finding the answers I need in it. NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs.
FM - tags and text boxes
Hi Merry > On 7/11/06, Merry Foxworth wrote: > > Another issue I have is the text boxes outlined by > > dotted lines. How does one change them? I would have > > thought it was possible when you switch the View to > > Master Pages but I don't see how. > > Is the problem that you do not want to see the dotted lines at all? > Select View in the menubar. > On the submenu, you probably have Borders checked. Select Borders to > remove the checkmark. The dotted lines vanish. > > The text frame for the body text for your Body page is located on the > Master Page if you need need to follow the instructions from Rebecca > Officer about editing. > You will also get dotted lines from anchored frames, for example, but > they are on your Body page if they are created there. Checking or > unchecking Borders makes them visible or invisible no matter where > they are. > > If you are asking whether you can change the look of the dotted lines > (to a solid line for example), I don't believe you can. Others may > have a comment about this. > > Hope this helps a bit more. > > BTW If you can get a copy of Adobe's Classroom in a Book for 5.5, that > should be quite useful. It is an excellent starting point for new > FrameMaker users - at least, that was my personal experience. > > regards, Karen >
William Weiss is out of the office.
I will be out of the office starting 07/11/2006 and will not return until 07/19/2006. I will respond to your message as quickly as possible upon my return.
Expressing Fractions with Offset Numbers and Division Symbols
Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ?). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 jdyson at kvh.com http://www.kvh.com The information contained in this electronic mail transmission is intended by KVH Industries for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected.
Expressing Fractions with Offset Numbers and Division Symbols
First of all, you should use the fraction slash by typing Control+q Shift+z. Then you can apply character formats to the numerator and denominator. The numerator format will use the Superscript position and the denominator format will use the Subscript position. You set the specifications for superscript and subscript globally in a document by using Format > Document > Text Options. The problem comes if you have other superscripted and subscripted characters in the document that should have different sizes or positions. However, this limitation can be overcome with FrameScript. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ?). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 jdyson at kvh.com http://www.kvh.com
Expressing Fractions with Offset Numbers and Division Symbols
Here are some other solutions: You can buy dedicated fraction fonts from Adobe, Monotype, and others. They will usually match a particular typeface; for example, Helvetica Fractions matches Helvetica. Or, if you use a typeface that has a corresponding "Expert" set, you can use the Expert font for the fractions. For example, I have Plantin, which has an expert font called "Alt Figures." It contains each number in both numerator and denominator sizes and positions. The advantage to these numbers is that their weight is boosted so that don't look lighter than the surrounding characters, even though they are smaller. Its fraction slash is accessed by typing a normal forward slash. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com Does anyone have any advice on how to express fractions with offset numbers and division symbols? I'd like them to appear as they do in Microsoft Character Map or Quark (ex. ?). Your suggestions would be greatly appreciated. James Dyson Associate Technical Writer KVH Industries, Inc. 50 Enterprise Center | Middletown, RI 02842 Direct Tel: +1 401.845.2416 Tel: +1 401.847.3327 | Fax: +1 401.849-0045 jdyson at kvh.com http://www.kvh.com
FM - tags and text boxes
Hi Merry On 7/11/06, Merry Foxworth wrote: > Karen, > > Thanks for your reply, but no, I am not asking about > how to change the look of the dotted lines, because > they don't show up on the final copy (at least I don't > think they do). I am asking about how to manipulate, > i.e. resize, them. I would rather see them so I know > where they are. Nope, they won't show up in the final copy. They are only there for your editing convenience. Showing or hiding Borders makes the frames visible so you know where they are. Rebecca gave you the manipulating details. > I will look for that book you mentioned in a used book > shop near here. Another tip: www.abebooks.com - if your local shop doesn't have it - or they can order from there, if they belong to ABE. > btw, you don't have to send me a message and then the > same message to the list, because I will see it there, > and it will avoid my getting duplicate messages. I > would just delete the one, but I am not sure whether > you are telling me something different than what you > are telling the list until I actually open both. Sorry about that! I meant to answer to the group (knowledge sharing, etc.). First reply went just to you, so I just sent it again - this time to the group. Apologies about the duplication. regards, Karen Mardahl
FM - tags and text boxes
Merry, Do you have access to the Frame manual set and/or the online help and doc? Supplemental manuals are usually in C:\Program Files\Adobe\FrameMaker7.2\OnlineManuals It's a good starting point for learning about the program... Art On 7/10/06, Merry Foxworth wrote: > Again, thanks to several of you, especially those who > told me about Ctrl - M. As you all can probably tell, > I am new to FrameMaker. > > Another issue I have is the text boxes outlined by > dotted lines. How does one change them? I would have > thought it was possible when you switch the View to > Master Pages but I don't see how. > -- Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358
OT: promotion
Hi all: If any of you are looking at Oxygen XML (http://www.oxygenxml.com/) please let me know before you commit. I have a promotional offer that allows people to save another 15%. I'm not making anything off it. However, our company presents and shows this and more at conferences (we'll be at TriXML [http://conf.travelthepath.com], Doctrain [http://www.doctrain.com] and Lavacon [http://www.lavacon.org]). SyncRO Soft wanted me to extend an offer to people who attend the conferences or courses that I teach. I thought I'd forward the offer early to anyone who can benefit from it. I'm sending this to several list servers, but please email me directly if you want the promo code to keep the email volume down. Thanks in advance, Bernard Bernard Aschwanden Publishing Technologies Expert Publishing Smarter bernard at publishingsmarter.com www.publishingsmarter.com
Adobe announces FrameMaker DITA Application Pack
In a webinar today, Adobe announced and demoed the FrameMaker DITA Application Pack, an extension to FrameMaker that adds full DITA support to FrameMaker 7.2. Adobe did ship a DITA structured application with FrameMaker 7.2, but the application pack adds much more functionality, including a DITA menu, support for maps, relationship tables, conrefs, and ID generation. There will be online help and installation instructions. Based on what I saw of the demo, this will make it much easier to author DITA-based content in structured FrameMaker. For example, if you add a topic reference to a map and the topic doesn't already exist, FrameMaker will create the topic and assign it a unique ID. If you double-click on a topic in a map, the topic opens for editing. If you create a conref to an element that doesn't have an ID, FrameMaker will generate the ID for you. The Application Pack will be freely available for downloading by FrameMaker 7.2 users. It'll be in open beta in August, with a full release sometime later (no specific date was given). Adobe will also be releasing an S1000D Starter Kit, with will provide similar functionality for the S1000D users. This is exciting news for both FrameMaker users and DITA devotees. It's clear that Adobe is finally devoting more development and marketing resources to FrameMaker. It will also make it easier for writers like myself, who don't have the resources of a documentation group with XML wizards on staff, to adopt structured authoring and DITA. On a related front, they did say that there will be more FrameMaker webinars in the fall. They will make the first three webinars, including today's, available for online viewing sometime soon. Regards Keith
FM - text boxes
When I switch to Master Pages, the dotted boxes look different from those in Body Pages, so there is no point in even trying to change them. I have no idea how one works with them. As someone pointed out, 5.5 is a pretty old version and doesn't have the same level of support. > First, back your file up before you play with text > frames on Master > pages. You can get unexpected results. I guess so!!! > > Another issue I have is the text boxes outlined by > dotted lines. How does one change them? I would > have > thought it was possible when you switch the View to > Master Pages but I don't see how. > ???)) -:?:- ?.?? .)) ((??.?? ..?? -:?:- An excerpt from Robert Giddings "Musical Quotes and Anecdotes", published in Longman Pocket Companions: "There let the pealing organ blow, To the full-voiced choir below, In service high, and anthems clear, As may with sweetness, through mine ear, Dissolve me into ecstasies, And bring all Heav'n before mine eyes". John Milton - Il Penseroso (1632). __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Cross-references to Figure/Table captions work in FM, but not in PDF
Hi, guys...something weird. I place Figure and Table numbers in my FM 7.2 documents by cross-referencing to the figure or table caption. The captions are composed acording to the following: F:Figure:\ T:Table :\ When I CTRL ALT Mouseover, in the FM document, the link works fine. I can click the FM X-ref and it goes to the figure or table caption. The X-ref "T" markers appears in the captions just like they should. However, when I convert to PDF using version 7.0 (Distiller 7.0.5) (Save As -> PDF) (PDF version 1.3 (Acrobat 4.0), all the types of links work in the document except for Figure or Table X-Refs. When I place the cursor over the Fig or Table X-Refs, it turns to a pointy hand as it should, the whole X-ref string turns reverse video when I click as it should, but nothing happens. I even tried applying the complete range of X-ref formats to the cross reference just to see if it was because of a x-ref format, but they all act the same. Anyone know what might be happening? John Posada Senior Technical Writer "I think the problem, to be quite honest with you, is that you've never actually known what the question is."
Cross-references to Figure/Table captions work in FM, but not in PDF
Hi John - I have no explanation but I do have a possible solution. When crerating the PDF, turn on Create Named Destinations. You shouldn't have to do this for internal xrefs but it solved the problem for a client of mine. Pat Christenson On Jul 11, 2006, at 2:52 PM, John Posada wrote: > Hi, guys...something weird. I place Figure and Table numbers in my FM > 7.2 documents by cross-referencing to the figure or table caption. > The captions are composed acording to the following: > > F:Figure:\ > T:Table :\ > > When I CTRL ALT Mouseover, in the FM document, the link works fine. I > can click the FM X-ref and it goes to the figure or table caption. > > The X-ref "T" markers appears in the captions just like they should. > > However, when I convert to PDF using version 7.0 (Distiller 7.0.5) > (Save As -> PDF) (PDF version 1.3 (Acrobat 4.0), all the types of > links work in the document except for Figure or Table X-Refs. When I > place the cursor over the Fig or Table X-Refs, it turns to a pointy > hand as it should, the whole X-ref string turns reverse video when I > click as it should, but nothing happens. > > I even tried applying the complete range of X-ref formats to the > cross reference just to see if it was because of a x-ref format, but > they all act the same. > > Anyone know what might be happening? > > John Posada > Senior Technical Writer > > "I think the problem, to be quite honest with you, is that you've > never actually known what the question is." > ___ > > > You are currently subscribed to Framers as pxenson at comcast.net. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/ > pxenson%40comcast.net > > Send administrative questions to lisa at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. >
Technical Writer - Contract - Dallas, TX
TW-890 Technical Writer - Contract - Dallas, TX Rate: BOE Length - 4 - 6 months A leading manufacturer of device and application management software HQ'ed in Plano needs a tech writer with end user documentation experience. Requirements: o. 5 - 10 years experience writing end user documentation (Required) o. FrameMaker (Required) o. Experience writing API guides (Preferable but not a must) o. Experience with VMS (WMI) a plus o. Experience with WBEM/DMTF a plus Notes: o. Authorized US workers only. o. Local candidates only. o. After getting grooved in you can work from home and come in once a week or more if needed. o. To be considered, apply for job TW-890 via the ProSpring jobs page at: www.prospring.net/jobs.php
promotion
Actually, the Tri-XML conference for XML users is at http://www.trixml.org/confindex.shtml -Original Message- From: Bernard Aschwanden Hi all: If any of you are looking at Oxygen XML (http://www.oxygenxml.com/) please let me know before you commit. I have a promotional offer that allows people to save another 15%. I'm not making anything off it. However, our company presents and shows this and more at conferences (we'll be at TriXML [http://conf.travelthepath.com], Doctrain [http://www.doctrain.com] and Lavacon [http://www.lavacon.org]). SyncRO Soft wanted me to extend an offer to people who attend the conferences or courses that I teach.