RE: set Aframe propertys (on import XML)
Hello Matt, So far I can't find the rule for setting a frame border on anchored frames (rule applies only for tables) - am I missing something ...? Kind regards, vriendelijke groet, Wim Hooghwinkel Adobe Certified Expert (ACE) in FrameMaker iDTP International DTP and Documentation Consultancy tel. +31652036811 i...@idtp.eu www.idtp.eu ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
incorrect file name in the book - FM6 Unix
I am working on FrameMaker 6 under Unix. When I open the book, the Chapter 7 Signal Analysis does not appear as Chapter 7 but as Figure 364: Detected signals . When I click on FormatDocumentNumbering, from the book, I check the following option: Continue numbering from the previous file. This error has occurred after updating the book several times. I have deleted the Figure 364 caption but I still get the same error. Any ideas on what might be causing this? How to solve this problem? Thanks Kattalin Arbelbide - Cet e-mail contient des informations confidentielles appartenant a INTESPACE reservees aux destinataires du message. La copie, l'utilisation et la reproduction de cet e-mail ou de toute information qu'il contient sont interdites. La societe INTESPACE ne pourra pas etre tenue pour responsable si le contenu de cet e-mail a ete modifie ou altere. Si vous n'en etes pas le destinataire, merci de bien vouloir le detruire immediatement de votre systeme et de prevenir l'emetteur. - This e-mail contains confidential information or information belonging to INTESPACE and is intended solely for the addressees. The unauthorised disclose, use, dissemination or copying of this e-mail, or any information it contains, is prohibited.INTESPACE shall not be liable for e-mail if modified or falsified. If you are not the intended recipient of it, please delete it immediately from your system and notify the sender. - ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Issue with ePublisher/Webworks and Word
HiI know this is a forum for Frame, but found your site very valuable, as it cited an issue with Frame and WW 2008.4 that may, indeed, be similar to the issue I am having with Word 2007 and WW 2008.4.?? It can't seem to dulicate the Source word file when I attempt to port to WW. Does anyone know of an issue with Word 2007 and WW 8.4? If so, are there any known work arounds? OR...can you direct me to a site where I might find some info on this issue? Thank you for your help. Deb - Tech Writer - San Jose, CA ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Frame Displays and Prints Squished .cgm files
We have a user here that is working in Frame 6.0 +SGML in a structured document (yes we are trying to get the customer to update), on a Windows XP machine. When he views and/or prints a page that contains a .cgm illustration, the text is squished or flattened a bit. The same files display fine on some other machines but not all. We have not been able to find a common thread that causes this. We have tried checking every setting in Frame that we can find, copied all the fonts from a good machine to his, and tried every print driver in the house including postscript, PCL, and Adobe. IT tells us that all settings on the computers are the same as is the hardware. Strangely enough, it does appear correctly in Frame 8. Has anyone else experienced this dilemma? He can work around it for now by using another system to create his deliverables, but this is driving several of us here totally batty! Thanks in advance for any ideas you can provide. Sincerely, Lisa Freeman Publications Support Analyst O'Neil Associates 495 Byers Road Miamisburg, OH 45342 Phone: (937)865-0846 Ext. 3709 E-Mail: lfree...@oneil.com mailto:lfree...@oneil.com ** Confidentiality Notice The information contained in this e-mail is confidential and intended for use only by the person(s) or organization listed in the address. If you have received this communication in error, please contact the sender at O'Neil Associates, Inc., immediately. Any copying, dissemination, or distribution of this communication, other than by the intended recipient, is strictly prohibited. ** ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Usage of WebWorks (ePublisher)
If the client is merely trying to save money by using a free tool, we'll *give* her a copy of Mif2Go. Nobody should have to go through that process to keep a job... This is what makes America great! Bravo! Rick -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Kelly McDaniel Sent: Friday, April 17, 2009 5:54 AM To: Jeremy H. Griffith; framers@lists.frameusers.com Subject: RE: Usage of WebWorks (ePublisher) If the client is merely trying to save money by using a free tool, we'll *give* her a copy of Mif2Go. Nobody should have to go through that process to keep a job... (Standing ovation)...Kelly. -Original Message- From: framers-boun...@lists.frameusers.com on behalf of Jeremy H. Griffith Sent: Thu 4/16/2009 6:46 PM To: framers@lists.frameusers.com Subject: Re: Usage of WebWorks (ePublisher) On Thu, 16 Apr 2009 11:13:06 -0400, Jim Owens jow...@magma.ca wrote: Nancy mentioned that her client insists on Webworks 7, so all other options are moot. Without knowing anything about the situation, I'd still venture that it's not in her client's interest to use something that's been discontinued. Can they be talked into a more sensible decision? I just checked in the FM7 book Sarah O'Keefe wrote, and it appears Webworks *Standard*, the one Nancy was required to use, does not even support HTML Help at all. You'd have to use the regular HTML output, then create the index, toc, project file, alias and map files by hand, or at best do it with HTML Help Workshop, which is almost as bad. If the client is merely trying to save money by using a free tool, we'll *give* her a copy of Mif2Go. Nobody should have to go through that process to keep a job... -- Jeremy H. Griffith, at Omni Systems Inc. jer...@omsys.com http://www.omsys.com/ ___ You are currently subscribed to Framers as kmcdan...@pavtech.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/kmcdaniel%40pavtech. com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as rmelan...@spirecorp.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/rmelanson%40spirecor p.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Anchored Frame Border
Select the anchored frame, go to the Display Tools Palette, click on Set Pen Pattern, Select the color of the pen, then select the line width of the border. Viola! Date: Thu, 16 Apr 2009 13:11:33 +0200 From: Wim Hooghwinkel - idtp w...@idtp.eu Subject: set Aframe propertys (on import XML) Hi, Would anyone know if it is possible to set the Frame propertys of an anchored frame (containing an imported graphic) - either by default or on import of an XML file? I would like to have the anchored frame a black border, but by default a frame has no border. Thanks . Kind regards, vriendelijke groet, Wim Hooghwinkel Adobe Certified Expert (ACE) in FrameMaker iDTP International DTP and Documentation Consultancy tel. +31652036811 -- Keith Smyth President Smyth Consulting - If you want to test your memory, try to recall what you were worried about one year ago today. - Technical Documentation Consultant ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Issue with ePublisher/Webworks and Word
I don't understand what exactly you're asking. However, a good source for ePub information is http://tech.groups.yahoo.com/group/wwp-users/. Nadine writing4busin...@aol.com wrote: HiI know this is a forum for Frame, but found your site very valuable, as it cited an issue with Frame and WW 2008.4 that may, indeed, be similar to the issue I am having with Word 2007 and WW 2008.4.?? It can't seem to dulicate the Source word file when I attempt to port to WW. Does anyone know of an issue with Word 2007 and WW 8.4? If so, are there any known work arounds? OR...can you direct me to a site where I might find some info on this issue? Thank you for your help. Deb - Tech Writer - San Jose, CA ___ You are currently subscribed to Framers as generic...@yahoo.ca. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Usage of WebWorks (ePublisher)
I can't resist either. I must bring closure to part of this thread, just in case somebody has a time machine accident or stumbles into a worm-hole and finds themself back in 1986. :-) There were several ways to eject a disk on a Mac. 1) Select the disk icon and choose Put Away. 2) Select the disk and choose Command-e or Eject. (Newer Finder versions) 3) Press Command-Shift-1. 4) Drag the icon to the trash. If the normal methods weren't working, you would just hold down the mouse button when you started up the computer. The paper clip was a last resort for cases like a dead power supply. If a disk got corrupted, the usual problem was a corrupted desktop file. That's the hidden file with the disk content database. To rebuild this file, you held down the Command (pretzel) and Option keys when you inserted the disk. You'd be asked if you wanted to rebuild the desktop file. Click OK, and most of the time you were back in business. It goes to Jeremy's point -- to get the best results from a tool, you need to learn as much about it as you can. E-mail lists like this help make that easier today than it was in 1986. Steve ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
set Aframe propertys (on import XML)
Hello Matt, So far I can't find the rule for setting a frame border on anchored frames (rule applies only for tables) - am I missing something ...? Kind regards, vriendelijke groet, Wim Hooghwinkel Adobe Certified Expert (ACE) in FrameMaker iDTP International DTP and Documentation Consultancy tel. +31652036811 info at idtp.eu www.idtp.eu
Issue with ePublisher/Webworks and Word
I don't understand what exactly you're asking. However, a good source for ePub information is http://tech.groups.yahoo.com/group/wwp-users/. Nadine writing4business at aol.com wrote: > HiI know this is a forum for Frame, but found your site very valuable, as > it cited an issue with Frame and WW 2008.4 that may, indeed, be similar to > the issue I am having with Word 2007 and WW 2008.4.?? It can't seem to > dulicate the Source word file when I attempt to port to WW. > > Does anyone know of an issue with Word 2007 and WW 8.4? > > If so, are there any known work arounds? > > OR...can you direct me to a site where I might find some info on this issue? > > Thank you for your help. > > Deb - Tech Writer - San Jose, CA > ___ > > > You are currently subscribed to Framers as generic668 at yahoo.ca. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > >