Text insets repeat first paragraph
Hi When I update my text inset in the destination document I get an empty Heading 2 after the text inset. It seems that the first paragraph in the text inset is repeated after the inset. So far the only solution I have found is to have an empty paragraph with a thin line above the Heading 2 in the text inset. Have you come up with a better solution? Med venlig hilsen - Best regards Verner Andersen Technical Writer Radiometer Medical ApS Phone +45 3827 3612 Fax +45 3827 2727 verner.andersen at radiometer.dk Radiometer Medical ApS Akandevej 21 2700 Bronshoj Denmark Phone: +45 38 27 38 27 CVR: 27 50 91 85 Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.
Text insets repeat first paragraph
Hi Verner This happens because your paragraph after the text inset is empty. So, 2 solutions: - If there is text following the text inset, remove the empty paragraph. - If there is no text following the text inset, for example if the text inset is at the end of your text flow, put a non-breaking space (CTRL+spacebar) in the paragraph. You can then update the text inset to your heart's content. ;-) Cheers -- Yves Barbion ? Managing Director ? Adobe-Certified FrameMaker Instructor www.scripto.nu ? skype: yves.barbion ? T: +32 494 12 01 89 On Tue, May 5, 2009 at 8:46 AM, Andersen, Verner Engell VEA < verner.andersen at radiometer.dk> wrote: > Hi > When I update my text inset in the destination document I get an empty > Heading 2 after the text inset. It seems that the first paragraph in the > text inset is repeated after the inset. > > So far the only solution I have found is to have an empty paragraph with > a thin line above the Heading 2 in the text inset. > > Have you come up with a better solution? > > Med venlig hilsen - Best regards > Verner Andersen > Technical Writer > > Radiometer Medical ApS > Phone +45 3827 3612 > Fax +45 3827 2727 > verner.andersen at radiometer.dk > > > > > Radiometer Medical ApS > Akandevej 21 > 2700 Bronshoj > Denmark > Phone: +45 38 27 38 27 > CVR: 27 50 91 85 > > > > Please be advised that this email may contain confidential information. > If you are not the intended recipient, please do not read, copy or > re-transmit this email. If you have received this email in error, > please notify us by email by replying to the sender and by telephone > (call us collect at +1 202-828-0850) and delete this message and any > attachments. Thank you in advance for your cooperation and assistance. > > In addition, Danaher and its subsidiaries disclaim that the content of > this email constitutes an offer to enter into, or the acceptance of, > any > contract or agreement or any amendment thereto; provided that the > foregoing disclaimer does not invalidate the binding effect of any > digital or other electronic reproduction of a manual signature that is > included in any attachment to this email. > ___ > > > You are currently subscribed to Framers as yves.barbion at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. >
Framers Digest, Vol 43, Issue 3
Verner We no longer use Frame, but perhaps our experiences are similar. We have about 10,000 html files in English, localizing into 12 languages, so we have over 100,000 files to manage. We don't currently have a lot of re-use. Over a year ago we started using XMetaL DITA to author all new content. We have started slowly migrating html to xml, which will take years. We recently purchased a CMS after a lengthy search. Our reasons are highly driven by Translation requirements. Our processes are very manual to get source to translation. So our big savings we hope to achieve in efficiency improvements. With the xml, we also hope to leverage more re-use as we go. The major goal is to maximize our source for localization. So somewhere down the road I hope we can implement a source style guide /copy editor to link our TM to our source. SDL GAMS (authorassistant) and acrolinx are the two applications I'm aware of. We did hire a consultant to guide us when we moved from html to xml and this was reassuring to make sure our own research was validated. In my opinion, that was a worthwhile expense. We did the search for a CMS vendor on our own. I might be able to send you a slide presentation one of my colleagues just presented at the CMS conference in florida last week. She presented on how we chose our cms vendor in 11 weeks. Let me know if you would like this and I will ask her to send you a copy. Joe Campo DS SolidWorks Concord, MA USA -Original Message- 2. Alternative to expensive CMS system (Andersen, Verner Engell VEA) Message: 2 Date: Mon, 4 May 2009 10:41:49 +0200 From: "Andersen, Verner Engell VEA" Subject: Alternative to expensive CMS system To: , "FrameMaker discussion list (omsys) (FrameMaker discussion list (omsys))" Message-ID: Content-Type: text/plain; charset="us-ascii" Hi We are evaluating wheteher we should migrate to Structured Framemaker. Our situation: * 4200 English source pages to convert, * no multi-channel output, * releatively small possibility of reuse, approximately 30% (if we can use conditions) * translation into more than 20 languages. We have Trados translation memory and the company is going to implement Master Control, a document control sw system. I know, it is now that we should discuss the situation with an unbiased consultant! We have already contacted one consultant. They had a very large system in mind, which was also used in the car industry and companies producing cell phones. Such a system would cost hundres of thousands of dollars. As I understand it, you only get real value out of structured Framemaker if you have a CMS system. Are there other content management systems that can do the job and be integrated with a translation memory system? Best regards, Verner Andersen Med venlig hilsen - Best regards Verner Andersen Technical Writer Radiometer Medical ApS Phone +45 3827 3612 Fax +45 3827 2727 verner.andersen at radiometer.dk Radiometer Medical ApS Akandevej 21 2700 Bronshoj Denmark Phone: +45 38 27 38 27 CVR: 27 50 91 85 *
[OT] checking links within a chm file
Hi, Thanks Kathy, this works a treat! Exactly what I was after. Thanks to everyone for all their help on this. This list is soo useful. :) Kind Regards, Lynn "Kathy Moore" 03/05/2009 07:29 To cc Subject Re: [OT] checking links within a chm file Hi, Lynn, I worked with .chm in my last job, and used FAR as a valuable tool for what sounds like your kind of challenge. You can see it for yourself and download a trial from Helpware at http://www.helpware.net/FAR/ HTH-- Kathleen Moore Reaction Design Message: 1 Hi Framers, I've created a chm file using MS HTMLHelp and I want to check that the internal hyperlinks within it are correct. For example, I've added a "See also" section at the bottom of a page to link to another page within the same chm file. I've had to rename a number of the html files so I want to double-check I haven't missed any renames or have any typos. My links I want to check look like this: Parameters (form) I've found something called CHMCheck, but this checks the external links to other referenced chm files only, not internal links. Can anyone point me to a free tool that can do this? Thanks very much in advance. Lynn
[OT] checking links within a chm file
FAR is an excellent tool that I have used for years. Chief developer Rob Chandler is a Microsoft MVP, and I am sure it will support the new Help 3 format as well as CHM and Help 2 when it becomes public. Lynn Durell wrote: > Hi, > > Thanks Kathy, this works a treat! Exactly what I was after. > > Thanks to everyone for all their help on this. This list is > soo useful. :) > > Kind Regards, > Lynn > > > > > "Kathy Moore" > 03/05/2009 07:29 > > To > > cc > > Subject > Re: [OT] checking links within a chm file > > > > > > > Hi, Lynn, > > I worked with .chm in my last job, and used FAR as a valuable tool for > what sounds like your kind of challenge. You can see it for yourself and > download a trial from Helpware at http://www.helpware.net/FAR/ > > HTH-- > > Kathleen Moore > Reaction Design > > > > > Message: 1 > Hi Framers, > > I've created a chm file using MS HTMLHelp and I want to check that the > internal hyperlinks within it are correct. For example, I've added a "See > also" section at the bottom of a page to link to another page within the > same chm file. I've had to rename a number of the html files so I want to > double-check I haven't missed any renames or have any typos. > > My links I want to check look like this: > > Parameters (form) > > I've found something called CHMCheck, but this checks the external links > to other referenced chm files only, not internal links. > > Can anyone point me to a free tool that can do this? > > Thanks very much in advance. > Lynn > > > ___ > > > You are currently subscribed to Framers as jdeland1 at comcast.net. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/jdeland1%40comcast.net > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > -- Jack DeLand :: member, information architecture institute :: 734.629.7890 :: www.jackdeland.com
search archives?
If the archives are up (they aren't always) you can reach them through the URL in the footer of each message. I've had better luck using google with the site flag: term site:frameusers.com But while you're using Google to search, if you just go for the term, you can also usually hit the other large Framer's mailing list (freeFramers at omsys.com) and the Adobe FM User's Forum, which was echoed as a newsgroup. Art Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Mon, May 4, 2009 at 2:08 PM, Mary Womble wrote: > Hi - I'm new to the list and figure there is a good chance someone else > asked the questions I'm about to. Is there a way to keyword search the > archives? > > Thanks, > > Mary > ___ > > > You are currently subscribed to Framers as art.campbell at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. >
FM9 - Replace Font option
I just discovered that FM 9 has a 'replace font' option or Pod. Using this option, a (missing) font can be replaced. >From what I read on the Adobe web site it should be a replacement for the former maker.ini modifications as used for FM up to FM8, to (temporarely) replace a non available font. But as the maker.ini modification only virtually replaces a font, it seems that this 'replace font' option definitely replaces the font - it changes the character and paragraph formats and these are saved when saving the file. Any one knows if this is by design, is it a 'bug' or is there a not yet documented escape after replacing the fonts? Kind regards, vriendelijke groet, Wim Hooghwinkel Adobe Certified Expert (ACE) in FrameMaker iDTP International DTP and Documentation Consultancy tel. +31652036811 info at idtp.eu www.idtp.eu
FM9 - Replace Font option
Wim Hooghwinkel wrote: > I just discovered that FM 9 has a 'replace font' option or Pod. Using this > option, a (missing) font can be replaced. > > >From what I read on the Adobe web site it should be a replacement for the > former maker.ini modifications as used for FM up to FM8, to (temporarely) > replace a non available font. But as the maker.ini modification only > virtually replaces a font, it seems that this 'replace font' option > definitely replaces the font - it changes the character and paragraph > formats and these are saved when saving the file. > > Any one knows if this is by design, is it a 'bug' or is there a not yet > documented escape after replacing the fonts? Actually, the font mappings in maker.ini replace fonts permanently if, in File > Preferences > General, Remember Missing Font Names is turned off. And it seems to me that that "escape" from replacing a font is to replace it again with the previous font. :-) Richard Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-777-0436 --
Re: Text insets repeat first paragraph
Hi Verner This happens because your paragraph after the text inset is empty. So, 2 solutions: - If there is text following the text inset, remove the empty paragraph. - If there is no text following the text inset, for example if the text inset is at the end of your text flow, put a non-breaking space (CTRL+spacebar) in the paragraph. You can then update the text inset to your heart's content. ;-) Cheers -- Yves Barbion • Managing Director • Adobe-Certified FrameMaker Instructor www.scripto.nu • skype: yves.barbion • T: +32 494 12 01 89 On Tue, May 5, 2009 at 8:46 AM, Andersen, Verner Engell VEA < verner.ander...@radiometer.dk> wrote: > Hi > When I update my text inset in the destination document I get an empty > Heading 2 after the text inset. It seems that the first paragraph in the > text inset is repeated after the inset. > > So far the only solution I have found is to have an empty paragraph with > a thin line above the Heading 2 in the text inset. > > Have you come up with a better solution? > > Med venlig hilsen - Best regards > Verner Andersen > Technical Writer > > Radiometer Medical ApS > Phone +45 3827 3612 > Fax +45 3827 2727 > verner.ander...@radiometer.dk > > > > > Radiometer Medical ApS > Akandevej 21 > 2700 Bronshoj > Denmark > Phone: +45 38 27 38 27 > CVR: 27 50 91 85 > > > > Please be advised that this email may contain confidential information. > If you are not the intended recipient, please do not read, copy or > re-transmit this email. If you have received this email in error, > please notify us by email by replying to the sender and by telephone > (call us collect at +1 202-828-0850) and delete this message and any > attachments. Thank you in advance for your cooperation and assistance. > > In addition, Danaher and its subsidiaries disclaim that the content of > this email constitutes an offer to enter into, or the acceptance of, > any > contract or agreement or any amendment thereto; provided that the > foregoing disclaimer does not invalidate the binding effect of any > digital or other electronic reproduction of a manual signature that is > included in any attachment to this email. > ___ > > > You are currently subscribed to Framers as yves.barb...@gmail.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Framers Digest, Vol 43, Issue 3
Verner We no longer use Frame, but perhaps our experiences are similar. We have about 10,000 html files in English, localizing into 12 languages, so we have over 100,000 files to manage. We don't currently have a lot of re-use. Over a year ago we started using XMetaL DITA to author all new content. We have started slowly migrating html to xml, which will take years. We recently purchased a CMS after a lengthy search. Our reasons are highly driven by Translation requirements. Our processes are very manual to get source to translation. So our big savings we hope to achieve in efficiency improvements. With the xml, we also hope to leverage more re-use as we go. The major goal is to maximize our source for localization. So somewhere down the road I hope we can implement a source style guide /copy editor to link our TM to our source. SDL GAMS (authorassistant) and acrolinx are the two applications I'm aware of. We did hire a consultant to guide us when we moved from html to xml and this was reassuring to make sure our own research was validated. In my opinion, that was a worthwhile expense. We did the search for a CMS vendor on our own. I might be able to send you a slide presentation one of my colleagues just presented at the CMS conference in florida last week. She presented on how we chose our cms vendor in 11 weeks. Let me know if you would like this and I will ask her to send you a copy. Joe Campo DS SolidWorks Concord, MA USA -Original Message- 2. Alternative to expensive CMS system (Andersen, Verner Engell VEA) Message: 2 Date: Mon, 4 May 2009 10:41:49 +0200 From: "Andersen, Verner Engell VEA" Subject: Alternative to expensive CMS system To: , "FrameMaker discussion list (omsys) (FrameMaker discussion list (omsys))" Message-ID: Content-Type: text/plain; charset="us-ascii" Hi We are evaluating wheteher we should migrate to Structured Framemaker. Our situation: * 4200 English source pages to convert, * no multi-channel output, * releatively small possibility of reuse, approximately 30% (if we can use conditions) * translation into more than 20 languages. We have Trados translation memory and the company is going to implement Master Control, a document control sw system. I know, it is now that we should discuss the situation with an unbiased consultant! We have already contacted one consultant. They had a very large system in mind, which was also used in the car industry and companies producing cell phones. Such a system would cost hundres of thousands of dollars. As I understand it, you only get real value out of structured Framemaker if you have a CMS system. Are there other content management systems that can do the job and be integrated with a translation memory system? Best regards, Verner Andersen Med venlig hilsen - Best regards Verner Andersen Technical Writer Radiometer Medical ApS Phone +45 3827 3612 Fax +45 3827 2727 verner.ander...@radiometer.dk Radiometer Medical ApS Akandevej 21 2700 Bronshoj Denmark Phone: +45 38 27 38 27 CVR: 27 50 91 85 * ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: [OT] checking links within a chm file
Hi, Thanks Kathy, this works a treat! Exactly what I was after. Thanks to everyone for all their help on this. This list is soo useful. :) Kind Regards, Lynn "Kathy Moore" 03/05/2009 07:29 To cc Subject Re: [OT] checking links within a chm file Hi, Lynn, I worked with .chm in my last job, and used FAR as a valuable tool for what sounds like your kind of challenge. You can see it for yourself and download a trial from Helpware at http://www.helpware.net/FAR/ HTH-- Kathleen Moore Reaction Design Message: 1 Hi Framers, I've created a chm file using MS HTMLHelp and I want to check that the internal hyperlinks within it are correct. For example, I've added a "See also" section at the bottom of a page to link to another page within the same chm file. I've had to rename a number of the html files so I want to double-check I haven't missed any renames or have any typos. My links I want to check look like this: Parameters (form) I've found something called CHMCheck, but this checks the external links to other referenced chm files only, not internal links. Can anyone point me to a free tool that can do this? Thanks very much in advance. Lynn ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: [OT] checking links within a chm file
FAR is an excellent tool that I have used for years. Chief developer Rob Chandler is a Microsoft MVP, and I am sure it will support the new Help 3 format as well as CHM and Help 2 when it becomes public. Lynn Durell wrote: > Hi, > > Thanks Kathy, this works a treat! Exactly what I was after. > > Thanks to everyone for all their help on this. This list is > soo useful. :) > > Kind Regards, > Lynn > > > > > "Kathy Moore" > 03/05/2009 07:29 > > To > > cc > > Subject > Re: [OT] checking links within a chm file > > > > > > > Hi, Lynn, > > I worked with .chm in my last job, and used FAR as a valuable tool for > what sounds like your kind of challenge. You can see it for yourself and > download a trial from Helpware at http://www.helpware.net/FAR/ > > HTH-- > > Kathleen Moore > Reaction Design > > > > > Message: 1 > Hi Framers, > > I've created a chm file using MS HTMLHelp and I want to check that the > internal hyperlinks within it are correct. For example, I've added a "See > also" section at the bottom of a page to link to another page within the > same chm file. I've had to rename a number of the html files so I want to > double-check I haven't missed any renames or have any typos. > > My links I want to check look like this: > > Parameters (form) > > I've found something called CHMCheck, but this checks the external links > to other referenced chm files only, not internal links. > > Can anyone point me to a free tool that can do this? > > Thanks very much in advance. > Lynn > > > ___ > > > You are currently subscribed to Framers as jdela...@comcast.net. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/jdeland1%40comcast.net > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > -- Jack DeLand :: member, information architecture institute :: 734.629.7890 :: www.jackdeland.com ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
search archives?
Hi - I'm new to the list and figure there is a good chance someone else asked the questions I'm about to. Is there a way to keyword search the archives? Thanks, Mary ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: search archives?
If the archives are up (they aren't always) you can reach them through the URL in the footer of each message. I've had better luck using google with the site flag: term site:frameusers.com But while you're using Google to search, if you just go for the term, you can also usually hit the other large Framer's mailing list (freefram...@omsys.com) and the Adobe FM User's Forum, which was echoed as a newsgroup. Art Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Mon, May 4, 2009 at 2:08 PM, Mary Womble wrote: > Hi - I'm new to the list and figure there is a good chance someone else > asked the questions I'm about to. Is there a way to keyword search the > archives? > > Thanks, > > Mary > ___ > > > You are currently subscribed to Framers as art.campb...@gmail.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM9 - Replace Font option
I just discovered that FM 9 has a 'replace font' option or Pod. Using this option, a (missing) font can be replaced. >From what I read on the Adobe web site it should be a replacement for the former maker.ini modifications as used for FM up to FM8, to (temporarely) replace a non available font. But as the maker.ini modification only virtually replaces a font, it seems that this 'replace font' option definitely replaces the font - it changes the character and paragraph formats and these are saved when saving the file. Any one knows if this is by design, is it a 'bug' or is there a not yet documented escape after replacing the fonts? Kind regards, vriendelijke groet, Wim Hooghwinkel Adobe Certified Expert (ACE) in FrameMaker iDTP International DTP and Documentation Consultancy tel. +31652036811 i...@idtp.eu www.idtp.eu ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: FM9 - Replace Font option
Wim Hooghwinkel wrote: > I just discovered that FM 9 has a 'replace font' option or Pod. Using this > option, a (missing) font can be replaced. > > >From what I read on the Adobe web site it should be a replacement for the > former maker.ini modifications as used for FM up to FM8, to (temporarely) > replace a non available font. But as the maker.ini modification only > virtually replaces a font, it seems that this 'replace font' option > definitely replaces the font - it changes the character and paragraph > formats and these are saved when saving the file. > > Any one knows if this is by design, is it a 'bug' or is there a not yet > documented escape after replacing the fonts? Actually, the font mappings in maker.ini replace fonts permanently if, in File > Preferences > General, Remember Missing Font Names is turned off. And it seems to me that that "escape" from replacing a font is to replace it again with the previous font. :-) Richard Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-777-0436 -- ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.