ANN Half-hour webinars (free): Hypertext in FM Generated Files (Apr 4) + Popup menus in PDFs (Apr 11)
(free; no fluff, no hype, no nonsense; starting 9am PT) . Hypertext in FrameMaker Generated Files (TOC/IX) -- Thursday, April 4 For more info or to register: https://www3.gotomeeting.com/register/474393614 . Popup menus in PDFs (with FrameMaker-to-Acrobat TimeSavers + Navigation Asst) -- Thursday, April 11 For more info or to register: https://www3.gotomeeting.com/register/114620830 Shlomo Perets MicroType, http://microtype.com FrameMaker/Acrobat/Captivate training consulting * FM-to-Acrobat TimeSavers/Assistants ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Formatting - setting font size to a percentage rather than a point size
Hi All, We're starting to use TCS3.5 to create help builds (using RoboHelp 9) from FrameMaker(10) files. To enable Web scaling of size (which is good for: the visually impaired, smartphones and tablets) we'd like to set the font sizes to percentages (for example, 100% =Body, Heading2 =120%, Heading1=140%). However, I can't see/find out how to do this. The Paragraph and Character Designers only seem to allow you to set point sizes. The FrameMaker help mentions the 'Font Pod', but I couldn't see/understand how this might be used. Any thoughts or suggestions would be very welcome. Many thanks - Steve Steve Whalley Technical Author KSS Fuels The information contained within this e-mail (and any attachment) sent by KSS Fuels is confidential and may be legally privileged. It is intended only for the named recipient or entity to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the e-mail immediately. Unauthorised access, use, disclosure, storage or copying is not permitted and may be unlawful. Any views or opinions expressed are solely those of the originator and do not necessarily represent those of KSS Fuels. Although KSS Fuels has made every reasonable effort to ensure that this message and any attachments contain no viruses and have not been intercepted or amended, it can not make any assurances to this effect. Knowledge Support Systems Limited, trading as KSS Fuels, Registered in England Wales under Company No. 2800886 Registered Office: St. James's Buildings, 79 Oxford Street, Manchester, M1 6SS, United Kingdom. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
ExtendScript Improvements in FrameMaker 11
Hi all, I am using TCS 3.5. This means I use unstructured FM 10 for PDF documents and RoboHelp 9 for help systems. I looked at TCS 4.0 and so far I have found the new version underwhelming. If I had structured FM or needed some of the new SSL in Robohelp, it might be a different story. But for someone who uses unstructured FM and webhelp, there's nothing really there there as far as I can tell. And no I couldn't care less about illustratror. One thing that may make me seriously consider upgrading to FrameMaker 11 is if Adobe fixed the bugs and feature gaps in the ExtendScript implementation in FM. However, I haven't been able to find out any information about that. Does anyone know? Thanks, Joe ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Formatting - setting font size to a percentage rather than a point size
Wouldn't that be managed all over in RH, not FM? BTW - I think you'll need TCS4 to create HTML5 multi-screen help that acts responsively. From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Steve Whalley Sent: Wednesday, March 27, 2013 11:19 AM To: framers@lists.frameusers.com Subject: Formatting - setting font size to a percentage rather than a point size Hi All, We're starting to use TCS3.5 to create help builds (using RoboHelp 9) from FrameMaker(10) files. To enable Web scaling of size (which is good for: the visually impaired, smartphones and tablets) we'd like to set the font sizes to percentages (for example, 100% =Body, Heading2 =120%, Heading1=140%). However, I can't see/find out how to do this. The Paragraph and Character Designers only seem to allow you to set point sizes. The FrameMaker help mentions the 'Font Pod', but I couldn't see/understand how this might be used. Any thoughts or suggestions would be very welcome. Many thanks - Steve Steve Whalley Technical Author KSS Fuels The information contained within this e-mail (and any attachment) sent by KSS Fuels is confidential and may be legally privileged. It is intended only for the named recipient or entity to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the e-mail immediately. Unauthorised access, use, disclosure, storage or copying is not permitted and may be unlawful. Any views or opinions expressed are solely those of the originator and do not necessarily represent those of KSS Fuels. Although KSS Fuels has made every reasonable effort to ensure that this message and any attachments contain no viruses and have not been intercepted or amended, it can not make any assurances to this effect. Knowledge Support Systems Limited, trading as KSS Fuels, Registered in England Wales under Company No. 2800886 Registered Office: St. James's Buildings, 79 Oxford Street, Manchester, M1 6SS, United Kingdom. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Formatting - setting font size to a percentage rather than a point size
Hi Steve,I believe you'll want to use em as your font unit to more easily control relative sizes for output.Also, check out theTechnical Communications Suite UsersGoogle group (tcs-users) for RH/FM integration info -MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.960.6840 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com On Mar 27, 2013, at 8:19 AM, Steve Whalley whall...@kssfuels.com wrote:Hi All,We’re starting to use TCS3.5 to create help builds (using RoboHelp 9) from FrameMaker(10) files. To enable Web scaling of size (which is good for: the visually impaired, smartphones and tablets) we’d like to set the font sizes to percentages (for example, 100% =Body, Heading2 =120%, Heading1=140%). However, I can’t see/find out how to do this. The Paragraph and Character Designers only seem to allow you to set point sizes. The FrameMaker help mentions the ‘Font Pod’, but I couldn’t see/understand how this might be used. Any thoughts or suggestions would be very welcome.Many thanks - SteveSteve WhalleyTechnical AuthorKSS FuelsThe information contained within this e-mail (and any attachment) sent by KSS Fuels is confidential and may be legally privileged. It is intended only for the named recipient or entity to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the e-mail immediately. Unauthorised access, use, disclosure, storage or copying is not permitted and may be unlawful. Any views or opinions expressed are solely those of the originator and do not necessarily represent those of KSS Fuels.Although KSS Fuels has made every reasonable effort to ensure that this message and any attachments contain no viruses and have not been intercepted or amended, it can not make any assurances to this effect.Knowledge Support Systems Limited, trading as KSS Fuels, Registered in England Wales under Company No. 2800886Registered Office: St. James’s Buildings, 79 Oxford Street, Manchester, M1 6SS, United Kingdom.___You are currently subscribed to framers asm...@mattrsullivan.com.Send list messages toframers@lists.frameusers.com.To unsubscribe send a blank email toframers-unsubscr...@lists.frameusers.comor visithttp://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.comSend administrative questions tolistad...@frameusers.com. Visithttp://www.frameusers.com/for more resources and info.___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: ExtendScript Improvements in FrameMaker 11
Hi Joe, From what I can tell, nothing much has changed in ExtendScript from version 10 to 11. If so, I can't find it documented anywhere. Rick Rick Quatro Carmen Publishing Inc. 585-283-5045 r...@frameexpert.com From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Joseph Lorenzini Sent: Wednesday, March 27, 2013 2:02 PM To: FrameMaker Forum; tcs-us...@googlegroups.com Subject: ExtendScript Improvements in FrameMaker 11 Hi all, I am using TCS 3.5. This means I use unstructured FM 10 for PDF documents and RoboHelp 9 for help systems. I looked at TCS 4.0 and so far I have found the new version underwhelming. If I had structured FM or needed some of the new SSL in Robohelp, it might be a different story. But for someone who uses unstructured FM and webhelp, there's nothing really there there as far as I can tell. And no I couldn't care less about illustratror. One thing that may make me seriously consider upgrading to FrameMaker 11 is if Adobe fixed the bugs and feature gaps in the ExtendScript implementation in FM. However, I haven't been able to find out any information about that. Does anyone know? Thanks, Joe ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: ExtendScript Improvements in FrameMaker 11
The best way to tell is to grab the FDKs for FM10 and FM11 and diff the .h files (the whole include folder). Since ExtendScript *should* mirror the FDK, this will give you a good idea of what's changed. There are a fair amount of changes, but probably not in things that you'll use much. There could be changes outside of the FDK as well .. but this gives you one slice of info. Cheers, ...scott On 3/28/13 6:32 AM, Rick Quatro wrote: Hi Joe, From what I can tell, nothing much has changed in ExtendScript from version 10 to 11. If so, I can't find it documented anywhere. Rick Rick Quatro Carmen Publishing Inc. 585-283-5045 r...@frameexpert.com *From:*framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] *On Behalf Of *Joseph Lorenzini *Sent:* Wednesday, March 27, 2013 2:02 PM *To:* FrameMaker Forum; tcs-us...@googlegroups.com *Subject:* ExtendScript Improvements in FrameMaker 11 Hi all, I am using TCS 3.5. This means I use unstructured FM 10 for PDF documents and RoboHelp 9 for help systems. I looked at TCS 4.0 and so far I have found the new version underwhelming. If I had structured FM or needed some of the new SSL in Robohelp, it might be a different story. But for someone who uses unstructured FM and webhelp, there's nothing really there there as far as I can tell. And no I couldn't care less about illustratror. One thing that may make me seriously consider upgrading to FrameMaker 11 is if Adobe fixed the bugs and feature gaps in the ExtendScript implementation in FM. However, I haven't been able to find out any information about that. Does anyone know? Thanks, Joe ___ You are currently subscribed to framers as s...@leximation.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
messages to fmer...@adobe.com bounce
hi, would someone know what happens with the e-mail alias fmerror@adobe.comlately? When FM crashed earlier this week I tried sending the log file as I normally do but this time it bounced. I tried resending again, and tried a couple more times over the last days, to no avail. the Delivery Failure Report tells me that my message was not delivered to:fmer...@adobe.com because:550 No such user - psmtp I know I was still able to send log files to this address in January. I found forum posts about a similar issue with an Adobe e-mail alias for a different product, but that problem had reportedly been resolved at some point. is Adobe experiencing problems with their e-mail servers? or are these aliases being retired? thanks, Suzanne ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: messages to fmer...@adobe.com bounce
I can confirm that there is indeed a problem with the fmer...@adobe.commailto:fmer...@adobe.com e-mail address. It is directly accessible within Adobe, but bounces everything addressed to it from outside. I have put in a service call to Adobe’s IT group to fix that problem ASAP. I’ll let the list know when the problem is resolved (assuming they respond to me!) ☺ - Dov [cid:image001.png@01CE2BD5.EB4CA420] Dov Isaacs Principal Scientist Adobe Systems Incorporated +1 408.536.2896 (tel) +1 408.242.5161 (cell) isa...@adobe.commailto:isa...@adobe.com 345 Park Avenue San Jose, CA 95110-2704 USA http://www.adobe.comhttp://www.adobe.com/ Feel free to print this e-mail if your needs dictate hard copy. There is no need to feel guilty about printing! Paper is renewable and recyclable. ISAACS-OFFICE.corp.adobe.com From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Suzanne Bolduc Sent: Thursday, March 28, 2013 3:03 PM To: framers@lists.frameusers.com Subject: messages to fmer...@adobe.com bounce hi, would someone know what happens with the e-mail alias fmer...@adobe.commailto:fmer...@adobe.com lately? When FM crashed earlier this week I tried sending the log file as I normally do but this time it bounced. I tried resending again, and tried a couple more times over the last days, to no avail. the Delivery Failure Report tells me that my message was not delivered to:fmer...@adobe.commailto:fmer...@adobe.com because:550 No such user - psmtp I know I was still able to send log files to this address in January. I found forum posts about a similar issue with an Adobe e-mail alias for a different product, but that problem had reportedly been resolved at some point. is Adobe experiencing problems with their e-mail servers? or are these aliases being retired? thanks, Suzanne inline: image001.png___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
ANN Half-hour webinars (free): Hypertext in FM Generated Files (Apr 4) + Popup menus in PDFs (Apr 11)
(free; no fluff, no hype, no nonsense; starting 9am PT) . Hypertext in FrameMaker Generated Files (TOC/IX) -- Thursday, April 4 For more info or to register: https://www3.gotomeeting.com/register/474393614 . Popup menus in PDFs (with FrameMaker-to-Acrobat TimeSavers + Navigation Asst) -- Thursday, April 11 For more info or to register: https://www3.gotomeeting.com/register/114620830 Shlomo Perets MicroType, http://microtype.com FrameMaker/Acrobat/Captivate training & consulting * FM-to-Acrobat TimeSavers/Assistants -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/549389ca/attachment.html>
Formatting - setting font size to a percentage rather than a point size
Wouldn't that be managed all over in RH, not FM? BTW - I think you'll need TCS4 to create HTML5 multi-screen help that acts responsively. From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Steve Whalley Sent: Wednesday, March 27, 2013 11:19 AM To: framers at lists.frameusers.com Subject: Formatting - setting font size to a percentage rather than a point size Hi All, We're starting to use TCS3.5 to create help builds (using RoboHelp 9) from FrameMaker(10) files. To enable Web scaling of size (which is good for: the visually impaired, smartphones and tablets) we'd like to set the font sizes to percentages (for example, 100% =Body, Heading2 =120%, Heading1=140%). However, I can't see/find out how to do this. The Paragraph and Character Designers only seem to allow you to set point sizes. The FrameMaker help mentions the 'Font Pod', but I couldn't see/understand how this might be used. Any thoughts or suggestions would be very welcome. Many thanks - Steve Steve Whalley Technical Author KSS Fuels The information contained within this e-mail (and any attachment) sent by KSS Fuels is confidential and may be legally privileged. It is intended only for the named recipient or entity to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the e-mail immediately. Unauthorised access, use, disclosure, storage or copying is not permitted and may be unlawful. Any views or opinions expressed are solely those of the originator and do not necessarily represent those of KSS Fuels. Although KSS Fuels has made every reasonable effort to ensure that this message and any attachments contain no viruses and have not been intercepted or amended, it can not make any assurances to this effect. Knowledge Support Systems Limited, trading as KSS Fuels, Registered in England & Wales under Company No. 2800886 Registered Office: St. James's Buildings, 79 Oxford Street, Manchester, M1 6SS, United Kingdom. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/beaa6cbb/attachment.html>
Formatting - setting font size to a percentage rather than a point size
Hi Steve, I believe you'll want to use em as your font unit to more easily control relative sizes for output. Also, check out the Technical Communications Suite Users Google group (tcs-users) for RH/FM integration info -Matt Matt R. Sullivan co-author Publishing Fundamentals: Unstructured FrameMaker 11 P: 714.960.6840 | C: 714.585.2335 | matt at mattrsullivan.com @mattrsullivan LinkedIn facebook mattrsullivan.com On Mar 27, 2013, at 8:19 AM, Steve Whalley wrote: > Hi All, > > We?re starting to use TCS3.5 to create help builds (using RoboHelp 9) from > FrameMaker(10) files. To enable Web scaling of size (which is good for: the > visually impaired, smartphones and tablets) we?d like to set the font sizes > to percentages (for example, 100% =Body, Heading2 =120%, Heading1=140%). > However, I can?t see/find out how to do this. The Paragraph and Character > Designers only seem to allow you to set point sizes. The FrameMaker help > mentions the ?Font Pod?, but I couldn?t see/understand how this might be > used. Any thoughts or suggestions would be very welcome. > > Many thanks - Steve > > Steve Whalley > Technical Author > KSS Fuels > > The information contained within this e-mail (and any attachment) sent by KSS > Fuels is confidential and may be legally privileged. It is intended only for > the named recipient or entity to whom it is addressed. If you are not the > intended recipient, please notify the sender and delete the e-mail > immediately. Unauthorised access, use, disclosure, storage or copying is not > permitted and may be unlawful. Any views or opinions expressed are solely > those of the originator and do not necessarily represent those of KSS Fuels. > > Although KSS Fuels has made every reasonable effort to ensure that this > message and any attachments contain no viruses and have not been intercepted > or amended, it can not make any assurances to this effect. > > Knowledge Support Systems Limited, trading as KSS Fuels, Registered in > England & Wales under Company No. 2800886 > Registered Office: St. James?s Buildings, 79 Oxford Street, Manchester, M1 > 6SS, United Kingdom. > ___ > > > You are currently subscribed to framers as matt at mattrsullivan.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. ------ next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/7e778276/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: twitter.png Type: image/png Size: 1331 bytes Desc: not available URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/7e778276/attachment.png> -- next part -- A non-text attachment was scrubbed... Name: linkedin.png Type: image/png Size: 1380 bytes Desc: not available URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/7e778276/attachment-0001.png> -- next part -- A non-text attachment was scrubbed... Name: facebook.png Type: image/png Size: 1576 bytes Desc: not available URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/7e778276/attachment-0002.png> -- next part -- A non-text attachment was scrubbed... Name: blog.png Type: image/png Size: 1222 bytes Desc: not available URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/7e778276/attachment-0003.png>
ExtendScript Improvements in FrameMaker 11
Hi Joe, >From what I can tell, nothing much has changed in ExtendScript from version 10 to 11. If so, I can't find it documented anywhere. Rick Rick Quatro Carmen Publishing Inc. 585-283-5045 rick at frameexpert.com From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Joseph Lorenzini Sent: Wednesday, March 27, 2013 2:02 PM To: FrameMaker Forum; TCS-Users at googlegroups.com Subject: ExtendScript Improvements in FrameMaker 11 Hi all, I am using TCS 3.5. This means I use unstructured FM 10 for PDF documents and RoboHelp 9 for help systems. I looked at TCS 4.0 and so far I have found the new version underwhelming. If I had structured FM or needed some of the new SSL in Robohelp, it might be a different story. But for someone who uses unstructured FM and webhelp, there's nothing really there there as far as I can tell. And no I couldn't care less about illustratror. One thing that may make me seriously consider upgrading to FrameMaker 11 is if Adobe fixed the bugs and feature gaps in the ExtendScript implementation in FM. However, I haven't been able to find out any information about that. Does anyone know? Thanks, Joe -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/90eb5d32/attachment.html>
ExtendScript Improvements in FrameMaker 11
The best way to tell is to grab the FDKs for FM10 and FM11 and diff the .h files (the whole include folder). Since ExtendScript *should* mirror the FDK, this will give you a good idea of what's changed. There are a fair amount of changes, but probably not in things that you'll use much. There could be changes outside of the FDK as well .. but this gives you one slice of info. Cheers, ...scott On 3/28/13 6:32 AM, Rick Quatro wrote: > > Hi Joe, > > From what I can tell, nothing much has changed in ExtendScript from > version 10 to 11. If so, I can't find it documented anywhere. > > Rick > > Rick Quatro > > Carmen Publishing Inc. > > 585-283-5045 > > rick at frameexpert.com > > *From:*framers-bounces at lists.frameusers.com > [mailto:framers-bounces at lists.frameusers.com] *On Behalf Of *Joseph > Lorenzini > *Sent:* Wednesday, March 27, 2013 2:02 PM > *To:* FrameMaker Forum; TCS-Users at googlegroups.com > *Subject:* ExtendScript Improvements in FrameMaker 11 > > Hi all, > > I am using TCS 3.5. This means I use unstructured FM 10 for PDF > documents and RoboHelp 9 for help systems. I looked at TCS 4.0 and so > far I have found the new version underwhelming. If I had structured FM > or needed some of the new SSL in Robohelp, it might be a different > story. But for someone who uses unstructured FM and webhelp, there's > nothing really there there as far as I can tell. > > And no I couldn't care less about illustratror. > > One thing that may make me seriously consider upgrading to FrameMaker > 11 is if Adobe fixed the bugs and feature gaps in the ExtendScript > implementation in FM. However, I haven't been able to find out any > information about that. > > Does anyone know? > > Thanks, > > Joe > > > > ___ > > > You are currently subscribed to framers as sp10 at leximation.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/1c1ae6b0/attachment.html>
messages to fmer...@adobe.com bounce
hi, would someone know what happens with the e-mail alias fmerror at adobe.comlately? When FM crashed earlier this week I tried sending the log file as I normally do but this time it bounced. I tried resending again, and tried a couple more times over the last days, to no avail. the Delivery Failure Report tells me that my message was not delivered to:fmerror at adobe.com because:550 No such user - psmtp I know I was still able to send log files to this address in January. I found forum posts about a similar issue with an Adobe e-mail alias for a different product, but that problem had reportedly been resolved at some point. is Adobe experiencing problems with their e-mail servers? or are these aliases being retired? thanks, Suzanne -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/33feedfc/attachment.html>
messages to fmer...@adobe.com bounce
I can confirm that there is indeed a problem with the fmerror at adobe.com<mailto:fmerror at adobe.com> e-mail address. It is directly accessible within Adobe, but bounces everything addressed to it from outside. I have put in a service call to Adobe?s IT group to fix that problem ASAP. I?ll let the list know when the problem is resolved (assuming they respond to me!) ? - Dov [cid:image001.png at 01CE2BD5.EB4CA420] Dov Isaacs Principal Scientist Adobe Systems Incorporated +1 408.536.2896 (tel) +1 408.242.5161 (cell) isaacs at adobe.com<mailto:isaacs at adobe.com> 345 Park Avenue San Jose, CA 95110-2704 USA http://www.adobe.com<http://www.adobe.com/> Feel free to print this e-mail if your needs dictate hard copy. There is no need to feel guilty about printing! Paper is renewable and recyclable. ISAACS-OFFICE.corp.adobe.com From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Suzanne Bolduc Sent: Thursday, March 28, 2013 3:03 PM To: framers at lists.frameusers.com Subject: messages to fmerror at adobe.com bounce hi, would someone know what happens with the e-mail alias fmerror at adobe.com<mailto:fmerror at adobe.com> lately? When FM crashed earlier this week I tried sending the log file as I normally do but this time it bounced. I tried resending again, and tried a couple more times over the last days, to no avail. the Delivery Failure Report tells me that my message was not delivered to:fmerror at adobe.com<mailto:fmerror at adobe.com> because:550 No such user - psmtp I know I was still able to send log files to this address in January. I found forum posts about a similar issue with an Adobe e-mail alias for a different product, but that problem had reportedly been resolved at some point. is Adobe experiencing problems with their e-mail servers? or are these aliases being retired? thanks, Suzanne -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/165056d9/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 871 bytes Desc: image001.png URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130328/165056d9/attachment.png>