RE: Book Save-As PDF w/ multiple page sizes - Follow-Up

[David Artman]

One additional note: "Why continue to use the Save-As method?  Why not just keep the process I’ve always had?  Well, for one thing, when I have to produce the entire document (over 30 books), it is much faster and simpler to use the Save-As PDF."
 
Have you setup a Watched Folder in Distiller and configured it to run at startup? If so, then "Print Book" is the same number of keystrokes or mouse clicks as "Save as PDF" (I just counted them: three). [After the one-time configuration of the Print Book and PDF Setup dialogs, of course.]
 
As additional bonus, if you configure Distiller to move the PS file to the primary watched folder's Out folder, then you can do a 'chain' of distillations just by dragging it to the Out folder's In folder (which it has because it, too, is a Watched folder with different Settings), for example, if you do a Press Quality and a Standard quality of each deliverable. Setup the primary folder with the best, most-lossless Settings, then set Distiller to watch its Out folder and set that folder's Settings with the alternate, lossier quality. Drag and drop from WF/Out to WF/Out/In and --BAM!-- another PDF appears in WF/Out/Out. [And you can continue ad infinitum, but I've never needed more than two levels of quality: print and screen.]
 
So now I'm three keystrokes/mouse clicks and one drag and drop to make TWO different-quality PDFs. Can't be done faster with Save as PDF, because you must change the PDF Settings bewtween each save (something like four more keystrokes/mouse clicks). ;)
 
[I wish the Watched Folder's didn't need to use In folders; because then you could totally automate a theoretically infinite chain of PDFs of different qualities. Alas... it 'really watches' the Watched Folder's IN folder, not the folder itself. :( ]
 
Happy distilling either way!
David
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Maker 12 on Mac -- DITA to PDF, Links Broken

[Chris Despopoulos]

Well, it turns out that it's the PDF Preview that ships on the Mac that is not 
recognizing hte links.  Still it's odd -- what is different that the same links 
work or don't work depending on where they are in the document when I generate? 
 Only your hair dresser knows for sure...
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Mif2go issue: invalid markup

[Robert Lauriston]

This is the place to go for help with the current open-source version:

https://groups.yahoo.com/neo/groups/mif2go/info

On Wed, Jun 10, 2015 at 8:17 AM, Wim Hooghwinkel - idtp  wrote:
> Hi,
>
> do we still have some mif2go gurus out there?
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Mif2go issue: invalid markup

[dspreadb]

Wim,Just a WAG but does your structure allow a fig element 'with a title 
element' within an info element?Your second fig element doesn't have a title 
element.
Sent from my T-Mobile 4G LTE device



-- Original message--From: Wim Hooghwinkel - idtpDate: Wed, Jun 10, 
2015 10:18 AMTo: Framers;Subject:Mif2go issue: invalid markup
Hi,do we still have some mif2go gurus out there?My mif2go conversion (FM11 to 
dita) creates invalid markup in some cases. Any help in solving this 
appreciated …My procedure has an image in a step. I expect it to be converted 
as:stepcmd.../cmdinfofigtitle ../titleimage//fig/info/stepbut in stead it comes 
out as:stepcmd ../cmdfigtitle…/titleinfoimage //fig/info/stepAs you can see, 
the info element starts inside the fig, but ends outside the fig element.Any 
idea…? Also, any suggestion for a smart script or SXLT that can solve this (in 
hundreds of topics …) appreciated.Thanks….Vriendelijke groet / Kind regards, 
Wim Hooghwinkel___You are currently 
subscribed to framers as dspre...@yahoo.com.send list messages to 
fram...@lists.frameusers.com.to unsubscribe send a blank email 
toframers-unsubscribe@lists.frameusers.comor visit 
http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.comSend 
administrative questions to listad...@frameusers.com. 
Visithttp://www.frameusers.com/ for more resources and info.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Mif2go issue: invalid markup

[Wim Hooghwinkel - idtp]

Hi,

do we still have some mif2go gurus out there?

My mif2go conversion (FM11 to dita) creates invalid markup in some cases. Any 
help in solving this appreciated …

My procedure has an image in a step. I expect it to be converted as:

step
cmd.../cmd
info
fig
title ../title
image/
/fig
/info
/step

but in stead it comes out as:

step
cmd ../cmd
fig
title…/title
info
image /
/fig
/info
/step

As you can see, the info element starts inside the fig, but ends outside the 
fig element.

Any idea…? 

Also, any suggestion for a smart script or SXLT that can solve this (in 
hundreds of topics …) appreciated.

Thanks….




Vriendelijke groet / Kind regards,
 
Wim Hooghwinkel

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: FrameMaker 12 XSLT Version

[David Spreadbury]

Rick,I missed this other reference:
"The output is created using a parser installed on the machine and registered 
with FrameMaker through maker.ini settings. XALAN and SAXON are installed by 
default on your machine with FrameMaker. XALAN supports XSLT 1.0 and SAXON 
supports XSLT 2.0. Both XALAN and SAXON are JAXP compliant."
Since Saxon is included, it just might be possible to use XSLT 1.0 and/or 2,0. 
YMMV 


 On Wednesday, June 10, 2015 9:58 AM, David Spreadbury  
wrote:
   

 Rick,According to the Using FrameMaker 12, page 481:"FrameMaker includes an 
XSLT processor that allows you to associate an XSLT file with an XML structure 
application or XML document, and apply the transformations defined in that 
document when importing from or exporting to XML. FrameMaker supports W3C XSLT 
1.0 recommendations. You can Upgrade to Saxon 2.0 processor by editing the 
maker.ini file."
 


 On Wednesday, June 10, 2015 9:48 AM, Rick Quatro  
wrote:
   

 #yiv1634228829 #yiv1634228829 -- filtered {font-family:Helvetica;panose-1:2 11 
6 4 2 2 2 2 2 4;}#yiv1634228829 filtered {panose-1:2 4 5 3 5 4 6 3 2 
4;}#yiv1634228829 filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 
4;}#yiv1634228829 filtered {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 
4;}#yiv1634228829 p.yiv1634228829MsoNormal, #yiv1634228829 
li.yiv1634228829MsoNormal, #yiv1634228829 div.yiv1634228829MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv1634228829 a:link, 
#yiv1634228829 span.yiv1634228829MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv1634228829 a:visited, #yiv1634228829 
span.yiv1634228829MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv1634228829 
p.yiv1634228829MsoAcetate, #yiv1634228829 li.yiv1634228829MsoAcetate, 
#yiv1634228829 div.yiv1634228829MsoAcetate 
{margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv1634228829 
p.yiv1634228829msonormal, #yiv1634228829 li.yiv1634228829msonormal, 
#yiv1634228829 div.yiv1634228829msonormal 
{margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv1634228829 
p.yiv1634228829msochpdefault, #yiv1634228829 li.yiv1634228829msochpdefault, 
#yiv1634228829 div.yiv1634228829msochpdefault 
{margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv1634228829 
span.yiv1634228829msohyperlink {}#yiv1634228829 
span.yiv1634228829msohyperlinkfollowed {}#yiv1634228829 
span.yiv1634228829emailstyle17 {}#yiv1634228829 p.yiv1634228829msonormal1, 
#yiv1634228829 li.yiv1634228829msonormal1, #yiv1634228829 
div.yiv1634228829msonormal1 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv1634228829 
span.yiv1634228829msohyperlink1 
{color:blue;text-decoration:underline;}#yiv1634228829 
span.yiv1634228829msohyperlinkfollowed1 
{color:purple;text-decoration:underline;}#yiv1634228829 
span.yiv1634228829emailstyle171 {color:#1F497D;}#yiv1634228829 
p.yiv1634228829msochpdefault1, #yiv1634228829 li.yiv1634228829msochpdefault1, 
#yiv1634228829 div.yiv1634228829msochpdefault1 
{margin-right:0in;margin-left:0in;font-size:10.0pt;}#yiv1634228829 
span.yiv1634228829EmailStyle27 {color:#1F497D;}#yiv1634228829 
span.yiv1634228829BalloonTextChar {}#yiv1634228829 .yiv1634228829MsoChpDefault 
{font-size:10.0pt;}#yiv1634228829 filtered {margin:1.0in 1.0in 1.0in 
1.0in;}#yiv1634228829 div.yiv1634228829WordSection1 {}#yiv1634228829 Hello 
Framers,  When using XSLT on XML import/export in FrameMaker, can I use XSLT 
2.0 or is the processor limited to 1.0? Thanks.  Rick  Rick QuatroCarmen 
Publishing inc.585-366-4017r...@frameexpert.com      
___


You are currently subscribed to framers as dspre...@yahoo.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


   

  ___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: FrameMaker 12 XSLT Version

[Rick Quatro]

Fantastic David! Thanks for reading the help for me J. I should have checked it 
before posting.

 

Rick

 

From: David Spreadbury [mailto:dspre...@yahoo.com] 
Sent: Wednesday, June 10, 2015 10:59 AM
To: Rick Quatro; framers@lists.frameusers.com
Subject: Re: FrameMaker 12 XSLT Version

 

Rick,

According to the Using FrameMaker 12, page 481:

"FrameMaker includes an XSLT processor that allows you to associate an XSLT 
file with an XML structure application or XML document, and apply the 
transformations defined in that document when importing from or exporting to 
XML. FrameMaker supports W3C XSLT 1.0 recommendations. You can Upgrade to Saxon 
2.0 processor by editing the maker.ini file."

 

 

 

On Wednesday, June 10, 2015 9:48 AM, Rick Quatro  wrote:

 

Hello Framers,

 

When using XSLT on XML import/export in FrameMaker, can I use XSLT 2.0 or is 
the processor limited to 1.0? Thanks.

 

Rick

 

Rick Quatro

Carmen Publishing Inc.

585-366-4017

r...@frameexpert.com

 

 

 


___


You are currently subscribed to framers as dspre...@yahoo.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/   for more resources and 
info.



___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: FrameMaker 12 XSLT Version

[David Spreadbury]

Rick,According to the Using FrameMaker 12, page 481:"FrameMaker includes an 
XSLT processor that allows you to associate an XSLT file with an XML structure 
application or XML document, and apply the transformations defined in that 
document when importing from or exporting to XML. FrameMaker supports W3C XSLT 
1.0 recommendations. You can Upgrade to Saxon 2.0 processor by editing the 
maker.ini file."
 


 On Wednesday, June 10, 2015 9:48 AM, Rick Quatro  
wrote:
   

 Hello Framers,  When using XSLT on XML 
import/export in FrameMaker, can I use XSLT 2.0 or is the processor limited to 
1.0? Thanks.  Rick  Rick QuatroCarmen Publishing 
inc.585-366-4017r...@frameexpert.com      
___


You are currently subscribed to framers as dspre...@yahoo.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


  ___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker 12 XSLT Version

[Rick Quatro]

Hello Framers,

 

When using XSLT on XML import/export in FrameMaker, can I use XSLT 2.0 or is 
the processor limited to 1.0? Thanks.

 

Rick

 

Rick Quatro

Carmen Publishing Inc.

585-366-4017

r...@frameexpert.com

 

 

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Maker 12 on Mac -- DITA to PDF, Links Broken

[Chris Despopoulos]

Did that, got the T-shirt.  No joy.  Also, the destination is external...  
They're all links to external URLs.  This option just adds data to the 
potential destinations within the given PDF file.

  From: Rick Quatro 
 To: 'Chris Despopoulos' ; 
framers@lists.frameusers.com 
 Sent: Wednesday, June 10, 2015 9:44 AM
 Subject: RE: Maker 12 on Mac -- DITA to PDF, Links Broken
   
#yiv0521514516 #yiv0521514516 -- _filtered #yiv0521514516 {panose-1:2 4 5 3 5 4 
6 3 2 4;} _filtered #yiv0521514516 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 
3 2 4;} _filtered #yiv0521514516 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 
2 4;} _filtered #yiv0521514516 {font-family:Verdana;panose-1:2 11 6 4 3 5 4 4 2 
4;}#yiv0521514516 #yiv0521514516 p.yiv0521514516MsoNormal, #yiv0521514516 
li.yiv0521514516MsoNormal, #yiv0521514516 div.yiv0521514516MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv0521514516 a:link, 
#yiv0521514516 span.yiv0521514516MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv0521514516 a:visited, #yiv0521514516 
span.yiv0521514516MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv0521514516 
span.yiv0521514516EmailStyle17 {color:#1F497D;}#yiv0521514516 
.yiv0521514516MsoChpDefault {font-size:10.0pt;} _filtered #yiv0521514516 
{margin:1.0in 1.0in 1.0in 1.0in;}#yiv0521514516 div.yiv0521514516WordSection1 
{}#yiv0521514516 Hi Chris,  In the PDF Setup dialog box, go to the Links tab 
and check Create Named Destinations for All Elements and Paragraphs and see if 
that makes a difference.  Rick  Rick QuatroCarmen Publishing 
inc.585-366-4017r...@frameexpert.com      

From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Chris Despopoulos
Sent: Wednesday, June 10, 2015 9:30 AM
To: framers@lists.frameusers.com
Subject: Maker 12 on Mac -- DITA to PDF, Links Broken  An odd problem...  I 
have a DITA publication, and I save as a Composite Document.  All is fine, 
except I have some hypertext links  implemented as markers on codeph text.  
(That translates to text with a specific text format, ao it shold work like any 
hypertext marker.)  When I look at them in Maker, they're all correct, and the 
modifier keys show that they are treated as hover regions, and they display 
what the link points to.  When I save as PDF, I have problems.  Here's the 
funny thing.  Some of them work, and some do not.  I can take one that doesn't 
work, and copy it into the same part of the document where one of them DOES 
work, and that copy will work.  I can copy one that does work and paste it into 
the region where one of then does NOT work, and that copy will not work.  What 
I get in the PDF is straight text, formatted correctly, but no link action.  I 
can see nothing to indicate why one region of the doc can generate a working 
link, and another region of the doc cannot.  The structure is valid, everything 
looks right.  And in case you think it's position...  Links work at the top, 
and at the bottom, and at other arbitrary positions in the tree. I have a 
nested topic where the first such link does not work, and the second one does.  
In other cases, the first link does work and the second one does not. In other 
cases non of them work, and still in other cases all the links in a topic work. 
 Now let's get even weirder...  I'm doing this on a Mac, running Maker within a 
Windows WM.  I can copy the file over to my Win machine, same version of Maker, 
and generate the PDF.  In that case, all the links work.   Does anybody have a 
clue what might be happening?  And no, it isn't HTTPS vs HTTP.  Thanks for ANY 
input     cud

  ___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Maker 12 on Mac -- DITA to PDF, Links Broken

[Rick Quatro]

Hi Chris,

 

In the PDF Setup dialog box, go to the Links tab and check Create Named 
Destinations for All Elements and Paragraphs and see if that makes a difference.

 

Rick

 

Rick Quatro

Carmen Publishing Inc.

585-366-4017

r...@frameexpert.com

 

 

 

From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Chris Despopoulos
Sent: Wednesday, June 10, 2015 9:30 AM
To: framers@lists.frameusers.com
Subject: Maker 12 on Mac -- DITA to PDF, Links Broken

 

An odd problem...  I have a DITA publication, and I save as a Composite 
Document.  All is fine, except I have some hypertext links  implemented as 
markers on codeph text.  (That translates to text with a specific text format, 
ao it shold work like any hypertext marker.)  When I look at them in Maker, 
they're all correct, and the modifier keys show that they are treated as hover 
regions, and they display what the link points to.  When I save as PDF, I have 
problems.

 

Here's the funny thing.  Some of them work, and some do not.  I can take one 
that doesn't work, and copy it into the same part of the document where one of 
them DOES work, and that copy will work.  I can copy one that does work and 
paste it into the region where one of then does NOT work, and that copy will 
not work.

 

What I get in the PDF is straight text, formatted correctly, but no link 
action.  I can see nothing to indicate why one region of the doc can generate a 
working link, and another region of the doc cannot.  The structure is valid, 
everything looks right.  And in case you think it's position...  Links work at 
the top, and at the bottom, and at other arbitrary positions in the tree. I 
have a nested topic where the first such link does not work, and the second one 
does.  In other cases, the first link does work and the second one does not. In 
other cases non of them work, and still in other cases all the links in a topic 
work.

 

Now let's get even weirder...  I'm doing this on a Mac, running Maker within a 
Windows WM.  I can copy the file over to my Win machine, same version of Maker, 
and generate the PDF.  In that case, all the links work. 

 

Does anybody have a clue what might be happening?  And no, it isn't HTTPS vs 
HTTP.

 

Thanks for ANY input cud

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Maker 12 on Mac -- DITA to PDF, Links Broken

[Chris Despopoulos]

An odd problem...  I have a DITA publication, and I save as a Composite 
Document.  All is fine, except I have some hypertext links  implemented as 
markers on codeph text.  (That translates to text with a specific text format, 
ao it shold work like any hypertext marker.)  When I look at them in Maker, 
they're all correct, and the modifier keys show that they are treated as hover 
regions, and they display what the link points to.  When I save as PDF, I have 
problems.

Here's the funny thing.  Some of them work, and some do not.  I can take one 
that doesn't work, and copy it into the same part of the document where one of 
them DOES work, and that copy will work.  I can copy one that does work and 
paste it into the region where one of then does NOT work, and that copy will 
not work.
What I get in the PDF is straight text, formatted correctly, but no link 
action.  I can see nothing to indicate why one region of the doc can generate a 
working link, and another region of the doc cannot.  The structure is valid, 
everything looks right.  And in case you think it's position...  Links work at 
the top, and at the bottom, and at other arbitrary positions in the tree. I 
have a nested topic where the first such link does not work, and the second one 
does.  In other cases, the first link does work and the second one does not. In 
other cases non of them work, and still in other cases all the links in a topic 
work.

Now let's get even weirder...  I'm doing this on a Mac, running Maker within a 
Windows WM.  I can copy the file over to my Win machine, same version of Maker, 
and generate the PDF.  In that case, all the links work. 

Does anybody have a clue what might be happening?  And no, it isn't HTTPS vs 
HTTP.

Thanks for ANY input     cud
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Adobe announces FrameMaker (2015 Release)

[Jeff Coatsworth]

That bit came out in FM12

-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert Lauriston
Sent: June-09-15 5:39 PM
To: Framers Mailing List (framers@lists.frameusers.com)
Subject: Re: Adobe announces FrameMaker (2015 Release)

"Empowering SMEs to author in a NEW, simplified 'form-like' XML
environment, without knowing XML"

That could be interesting, depending on exactly what it means, and how
much extra you have to pay to use it.
___


You are currently subscribed to framers as jeff.coatswo...@jonasclub.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/jeff.coatsworth%40jonasclub.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.