Slash in dialog boxes become bullets in pdf

[Christiane Crety (CC)]

OK, here are some more details:

* FrameMaker 8.0p277, unstructured

* Types of dialog boxes: Variable definitions and Index marker text.

* My variable format definition: SAILOR 6120/30/40/50 (just text, no 
character formats or anything)

* I think my index entry was "I/O connector" or something similar

* The font is a special company font (Type 1)

* I don't get any missing fonts messages in FrameMaker

* Another thing: I tried experimenting a bit. When the paragraph format 
had Weight = Bold, the problem was not there (that was the reason why my 
headings were OK). But since I can't have all my variables in bold,  I tried 
changing the variable definition with commas instead of slashes. Then I changed 
it back to slashes, and now the problem is gone! Exactly the same definition as 
before, but now I don't see the problem. Only trouble is: I am not very 
confident that the problem won't come back...
Regards,
Christiane

From: Roger Shuttleworth [mailto:rshuttlewo...@avbasesystems.com]
Sent: Tuesday, February 01, 2011 3:32 PM
To: Christiane Crety (CC)
Subject: Re: Slash in dialog boxes become bullets in pdf

Hi Christiane

You certainly are discovering some weird phenomena! It would help if you could 
give concrete examples, though. Can you post (to the list):
what version of FrameMaker
which dialog boxes you are referring to
the exact format for your variable
the character format definitions used in your variable, if any
what exactly you typed for your index entry
what fonts you are using, and the type (e.g. OpenType, Type 1, etc.)
whether you get any missing fonts messages in the  FM console

These details would help immensely in trying to help you.

Regards,
Roger

Roger Shuttleworth
Technical Documentation
AV-BASE Systems Inc.
1000 Air Ontario Drive, Suite 200
London, Ontario
N5V 3S4
Tel. 519 691-0919 ext. 330
____________
From: Christiane Crety (CC) [mailto:c...@thrane.com]
To: framers at lists.frameusers.com [mailto:framers at lists.frameusers.com]
Sent: Tue, 01 Feb 2011 08:58:00 -0500
Subject: Slash in dialog boxes become bullets in pdf

Hi Framers,
Windows XP, Frame 8.0p277, unstructured.
Thanks for the replies to my e-mail about conditionalized cross-references - 
that one is still not solved, unfortunately :(.
Now I have a new problem: When I type a slash (/) in a dialog box, it comes out 
as a bullet in my pdf. I have seen it in my index and in a variable. One 
strange thing though: My variable is OK in headings, but in body text the 
slashes come out as bullets in the pdf. In my Frame files everything looks OK.
Any ideas/suggestions how I can avoid this? (I tried putting a backslash before 
the slash, but that didn't change anything)

Thanks,
Christiane
___


You are currently subscribed to framers as rshuttleworth at 
avbasesystems.com<mailto:rshuttleworth at avbasesystems.com>.

Send list messages to framers at lists.frameusers.com<mailto:framers at 
lists.frameusers.com>.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at 
lists.frameusers.com>
or visit 
http://lists.frameusers.com/mailman/options/framers/rshuttleworth%40avbasesystems.com

Send administrative questions to listadmin at frameusers.com<mailto:listadmin 
at frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.

Slash in dialog boxes become bullets in pdf

[Christiane Crety (CC)]

Hi Framers,
Windows XP, Frame 8.0p277, unstructured.
Thanks for the replies to my e-mail about conditionalized cross-references - 
that one is still not solved, unfortunately :(.
Now I have a new problem: When I type a slash (/) in a dialog box, it comes out 
as a bullet in my pdf. I have seen it in my index and in a variable. One 
strange thing though: My variable is OK in headings, but in body text the 
slashes come out as bullets in the pdf. In my Frame files everything looks OK.
Any ideas/suggestions how I can avoid this? (I tried putting a backslash before 
the slash, but that didn't change anything)

Thanks,
Christiane

RE: Slash in dialog boxes become bullets in pdf

[Christiane Crety (CC)]

OK, here are some more details:

* FrameMaker 8.0p277, unstructured

* Types of dialog boxes: Variable definitions and Index marker text.

* My variable format definition: SAILOR 6120/30/40/50 (just text, no 
character formats or anything)

* I think my index entry was "I/O connector" or something similar

* The font is a special company font (Type 1)

* I don't get any missing fonts messages in FrameMaker

* Another thing: I tried experimenting a bit. When the paragraph format 
had Weight = Bold, the problem was not there (that was the reason why my 
headings were OK). But since I can't have all my variables in bold,  I tried 
changing the variable definition with commas instead of slashes. Then I changed 
it back to slashes, and now the problem is gone! Exactly the same definition as 
before, but now I don't see the problem. Only trouble is: I am not very 
confident that the problem won't come back...
Regards,
Christiane

From: Roger Shuttleworth [mailto:rshuttlewo...@avbasesystems.com]
Sent: Tuesday, February 01, 2011 3:32 PM
To: Christiane Crety (CC)
Subject: Re: Slash in dialog boxes become bullets in pdf

Hi Christiane

You certainly are discovering some weird phenomena! It would help if you could 
give concrete examples, though. Can you post (to the list):
what version of FrameMaker
which dialog boxes you are referring to
the exact format for your variable
the character format definitions used in your variable, if any
what exactly you typed for your index entry
what fonts you are using, and the type (e.g. OpenType, Type 1, etc.)
whether you get any missing fonts messages in the  FM console

These details would help immensely in trying to help you.

Regards,
Roger

Roger Shuttleworth
Technical Documentation
AV-BASE Systems Inc.
1000 Air Ontario Drive, Suite 200
London, Ontario
N5V 3S4
Tel. 519 691-0919 ext. 330
____________
From: Christiane Crety (CC) [mailto:c...@thrane.com]
To: framers@lists.frameusers.com [mailto:framers@lists.frameusers.com]
Sent: Tue, 01 Feb 2011 08:58:00 -0500
Subject: Slash in dialog boxes become bullets in pdf

Hi Framers,
Windows XP, Frame 8.0p277, unstructured.
Thanks for the replies to my e-mail about conditionalized cross-references - 
that one is still not solved, unfortunately :(.
Now I have a new problem: When I type a slash (/) in a dialog box, it comes out 
as a bullet in my pdf. I have seen it in my index and in a variable. One 
strange thing though: My variable is OK in headings, but in body text the 
slashes come out as bullets in the pdf. In my Frame files everything looks OK.
Any ideas/suggestions how I can avoid this? (I tried putting a backslash before 
the slash, but that didn't change anything)

Thanks,
Christiane
___


You are currently subscribed to framers as 
rshuttlewo...@avbasesystems.com<mailto:rshuttlewo...@avbasesystems.com>.

Send list messages to 
framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com<mailto:framers-unsubscr...@lists.frameusers.com>
or visit 
http://lists.frameusers.com/mailman/options/framers/rshuttleworth%40avbasesystems.com

Send administrative questions to 
listad...@frameusers.com<mailto:listad...@frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Slash in dialog boxes become bullets in pdf

[Christiane Crety (CC)]

Hi Framers,
Windows XP, Frame 8.0p277, unstructured.
Thanks for the replies to my e-mail about conditionalized cross-references - 
that one is still not solved, unfortunately :(.
Now I have a new problem: When I type a slash (/) in a dialog box, it comes out 
as a bullet in my pdf. I have seen it in my index and in a variable. One 
strange thing though: My variable is OK in headings, but in body text the 
slashes come out as bullets in the pdf. In my Frame files everything looks OK.
Any ideas/suggestions how I can avoid this? (I tried putting a backslash before 
the slash, but that didn't change anything)

Thanks,
Christiane
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Conditionalized cross-references

[Christiane Crety (CC)]

Hi Framers.
Windows XP SP3, FrameMaker 8.0p277.
We have a strange problem with our cross-references when they are made 
conditional.
The definition of the cross-reference is: <$paratext> 
on page\ <$pagenum>
It seems the  makes the text unconditional, i.e. the text from 
"on page" is unconditional although the whole cross-reference should be 
conditional.
Is there any way we can avoid this behavior?
Thanks in advance!

Best regards,
Christiane Crety
Technical Writer
T +45 39 55 86 82
E cc at thrane.com
Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88

Conditionalized cross-references

[Christiane Crety (CC)]

Hi Framers.
Windows XP SP3, FrameMaker 8.0p277.
We have a strange problem with our cross-references when they are made 
conditional.
The definition of the cross-reference is: <$paratext> 
on page\ <$pagenum>
It seems the  makes the text unconditional, i.e. the text from 
"on page" is unconditional although the whole cross-reference should be 
conditional.
Is there any way we can avoid this behavior?
Thanks in advance!

Best regards,
Christiane Crety
Technical Writer
T +45 39 55 86 82
E c...@thrane.com
Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Hi Art.

I downloaded the hotfix, but that didn't help. If I print to PS and then
run it through the Distiller it works fine. So that's what I'll do for
now...

Thanks for your advice though!



-And by the way: The other problem I had with FrameMaker wanting to quit
when I generate pdf disappeared all of a sudden yesterday. I can't think
of anything I've done that should make a difference (this was before I
installed the hotfix), but the problem is gone...

J

-Christiane



From: Art Campbell [mailto:art.campb...@gmail.com] 
Sent: Thursday, April 22, 2010 4:19 PM
To: Christiane Crety (CC)
Cc: dr_gonzo at pobox.com; framers at lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray



Because you're on XP, it'd be a good idea to install Microsoft's Hotfix
for PostScript printer issues. 
It addresses a number of issues in addition to the ones listed, so in
general it would be a great idea (IMHO, of course).

http://support.microsoft.com/?id=952909

Art

Art Campbell
art.campbell at gmail.com
 "... In my opinion, there's nothing in this world beats a '52 Vincent
and a redheaded girl." -- Richard Thompson
 No disclaimers
apply.
      DoD 358



On Thu, Apr 22, 2010 at 10:08 AM, Christiane Crety (CC) 
wrote:

No it is not the same, I just tried printing to PS and then distilling
and that works fine! I guess that's what I'll have to do then :-)

-Christiane


-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com]
Sent: Thursday, April 22, 2010 4:05 PM
To: Christiane Crety (CC)

Cc: Fred Ridder; framers at lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray

Is it the same if you print to PS and distill the PS?

On Thu, Apr 22, 2010 at 8:56 AM, Christiane Crety (CC) 
wrote:

> Sorry! Here is some additional information:
>
>
>
> Acrobat: Full version (Acrobat 9 Pro)
>
> Adobe Distiller 9 (version 9.3.2163)
>
> Driver: Adobe PDF converter
>
> Method: Save as PDF
>
>
>
> Usually this setup works fine for me, but I've had this error a couple
> of times in different books.
>
>
>
> - Christiane Crety
>
>
>
> From: Fred Ridder [mailto:docudoc at hotmail.com]
> Sent: Thursday, April 22, 2010 3:17 PM
> To: Christiane Crety (CC); framers at lists.frameusers.com
> Subject: RE: First referenced graphic in pdf turns gray
>
>
>
> Christiane Crety wrote:
>
>> FM 8.0p277 on Windows XP.
>>
>> Strange error when generating a pdf file from an FM book:
>>
>> The first referenced graphic in the book becomes gray (like
unresolved
>> graphics references) in the pdf, but not in FM.
>>
>> It has nothing to do with the graphic itself. I can move the graphic
>> after the other graphics and it looks fine. I can put another graphic
> in
>> the first anchored frame, and the same problem occurs: it appears as
a
>> gray box in the pdf. I can delete the first anchored frame and the
new
>> first graphic turns gray. It is always the first referenced graphic
in
>> the pdf that turns gray.
>
> In order to provide meaningful suggestions, we need to know more
> details, including:
> Do you have the full version of Acrobat or do you have only the
> Distiller bundled with FrameMaker? What version of Distiller and/or
> Acrobat are you using?
> What printer driver are you using? The "Adobe PDF" virtual printer
that
> gets installed in the FrameMaker install?
> What method are you using to generate the PDF? Save As PDF? Print to
> "Adobe PDF" virtual printer? Print to PostScript file then distill to
> PDF?
> -Fred Ridder
>
>
>
> ___
>
>

> You are currently subscribed to framers as dr_gonzo at pobox.com.

>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit

http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com

>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>




--

Steve Johnson, dr_gonzo at pobox.com

___


You are currently subscribed to framers as art.campbell at gmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail
.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Hi Art.

I downloaded the hotfix, but that didn't help. If I print to PS and then
run it through the Distiller it works fine. So that's what I'll do for
now...

Thanks for your advice though!

 

-And by the way: The other problem I had with FrameMaker wanting to quit
when I generate pdf disappeared all of a sudden yesterday. I can't think
of anything I've done that should make a difference (this was before I
installed the hotfix), but the problem is gone...

J

-Christiane

 

From: Art Campbell [mailto:art.campb...@gmail.com] 
Sent: Thursday, April 22, 2010 4:19 PM
To: Christiane Crety (CC)
Cc: dr_go...@pobox.com; framers@lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray

 

Because you're on XP, it'd be a good idea to install Microsoft's Hotfix
for PostScript printer issues. 
It addresses a number of issues in addition to the ones listed, so in
general it would be a great idea (IMHO, of course).
 
http://support.microsoft.com/?id=952909

Art

Art Campbell
art.campb...@gmail.com
 "... In my opinion, there's nothing in this world beats a '52 Vincent
and a redheaded girl." -- Richard Thompson
 No disclaimers
apply.
      DoD 358



On Thu, Apr 22, 2010 at 10:08 AM, Christiane Crety (CC) 
wrote:

No it is not the same, I just tried printing to PS and then distilling
and that works fine! I guess that's what I'll have to do then :-)

-Christiane


-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com]
Sent: Thursday, April 22, 2010 4:05 PM
To: Christiane Crety (CC)

Cc: Fred Ridder; framers@lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray

Is it the same if you print to PS and distill the PS?

On Thu, Apr 22, 2010 at 8:56 AM, Christiane Crety (CC) 
wrote:

> Sorry! Here is some additional information:
>
>
>
> Acrobat: Full version (Acrobat 9 Pro)
>
> Adobe Distiller 9 (version 9.3.2163)
>
> Driver: Adobe PDF converter
>
> Method: Save as PDF
>
>
>
> Usually this setup works fine for me, but I've had this error a couple
> of times in different books.
>
>
>
> - Christiane Crety
>
>
>
> From: Fred Ridder [mailto:docu...@hotmail.com]
> Sent: Thursday, April 22, 2010 3:17 PM
> To: Christiane Crety (CC); framers@lists.frameusers.com
> Subject: RE: First referenced graphic in pdf turns gray
>
>
>
> Christiane Crety wrote:
>
>> FM 8.0p277 on Windows XP.
>>
>> Strange error when generating a pdf file from an FM book:
>>
>> The first referenced graphic in the book becomes gray (like
unresolved
>> graphics references) in the pdf, but not in FM.
>>
>> It has nothing to do with the graphic itself. I can move the graphic
>> after the other graphics and it looks fine. I can put another graphic
> in
>> the first anchored frame, and the same problem occurs: it appears as
a
>> gray box in the pdf. I can delete the first anchored frame and the
new
>> first graphic turns gray. It is always the first referenced graphic
in
>> the pdf that turns gray.
>
> In order to provide meaningful suggestions, we need to know more
> details, including:
> Do you have the full version of Acrobat or do you have only the
> Distiller bundled with FrameMaker? What version of Distiller and/or
> Acrobat are you using?
> What printer driver are you using? The "Adobe PDF" virtual printer
that
> gets installed in the FrameMaker install?
> What method are you using to generate the PDF? Save As PDF? Print to
> "Adobe PDF" virtual printer? Print to PostScript file then distill to
> PDF?
> -Fred Ridder
>
>
>
> ___
>
>

> You are currently subscribed to framers as dr_go...@pobox.com.

>
> Send list messages to fram...@lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscr...@lists.frameusers.com
> or visit

http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com

>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>




--

Steve Johnson, dr_go...@pobox.com

___


You are currently subscribed to framers as art.campb...@gmail.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail
.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

 

___

First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

No it is not the same, I just tried printing to PS and then distilling
and that works fine! I guess that's what I'll have to do then :-)

-Christiane

-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com] 
Sent: Thursday, April 22, 2010 4:05 PM
To: Christiane Crety (CC)
Cc: Fred Ridder; framers at lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray

Is it the same if you print to PS and distill the PS?

On Thu, Apr 22, 2010 at 8:56 AM, Christiane Crety (CC) 
wrote:
> Sorry! Here is some additional information:
>
>
>
> Acrobat: Full version (Acrobat 9 Pro)
>
> Adobe Distiller 9 (version 9.3.2163)
>
> Driver: Adobe PDF converter
>
> Method: Save as PDF
>
>
>
> Usually this setup works fine for me, but I've had this error a couple
> of times in different books.
>
>
>
> - Christiane Crety
>
>
>
> From: Fred Ridder [mailto:docudoc at hotmail.com]
> Sent: Thursday, April 22, 2010 3:17 PM
> To: Christiane Crety (CC); framers at lists.frameusers.com
> Subject: RE: First referenced graphic in pdf turns gray
>
>
>
> Christiane Crety wrote:
>
>> FM 8.0p277 on Windows XP.
>>
>> Strange error when generating a pdf file from an FM book:
>>
>> The first referenced graphic in the book becomes gray (like
unresolved
>> graphics references) in the pdf, but not in FM.
>>
>> It has nothing to do with the graphic itself. I can move the graphic
>> after the other graphics and it looks fine. I can put another graphic
> in
>> the first anchored frame, and the same problem occurs: it appears as
a
>> gray box in the pdf. I can delete the first anchored frame and the
new
>> first graphic turns gray. It is always the first referenced graphic
in
>> the pdf that turns gray.
>
> In order to provide meaningful suggestions, we need to know more
> details, including:
> Do you have the full version of Acrobat or do you have only the
> Distiller bundled with FrameMaker? What version of Distiller and/or
> Acrobat are you using?
> What printer driver are you using? The "Adobe PDF" virtual printer
that
> gets installed in the FrameMaker install?
> What method are you using to generate the PDF? Save As PDF? Print to
> "Adobe PDF" virtual printer? Print to PostScript file then distill to
> PDF?
> -Fred Ridder
>
>
>
> ___
>
>
> You are currently subscribed to framers as dr_gonzo at pobox.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>



-- 

Steve Johnson, dr_gonzo at pobox.com

First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Sorry! Here is some additional information:



Acrobat: Full version (Acrobat 9 Pro)

Adobe Distiller 9 (version 9.3.2163)

Driver: Adobe PDF converter

Method: Save as PDF



Usually this setup works fine for me, but I've had this error a couple
of times in different books.



- Christiane Crety



From: Fred Ridder [mailto:docu...@hotmail.com] 
Sent: Thursday, April 22, 2010 3:17 PM
To: Christiane Crety (CC); framers at lists.frameusers.com
Subject: RE: First referenced graphic in pdf turns gray



Christiane Crety wrote:

> FM 8.0p277 on Windows XP.
> 
> Strange error when generating a pdf file from an FM book:
> 
> The first referenced graphic in the book becomes gray (like unresolved
> graphics references) in the pdf, but not in FM.
> 
> It has nothing to do with the graphic itself. I can move the graphic
> after the other graphics and it looks fine. I can put another graphic
in
> the first anchored frame, and the same problem occurs: it appears as a
> gray box in the pdf. I can delete the first anchored frame and the new
> first graphic turns gray. It is always the first referenced graphic in
> the pdf that turns gray.

In order to provide meaningful suggestions, we need to know more
details, including:
Do you have the full version of Acrobat or do you have only the
Distiller bundled with FrameMaker? What version of Distiller and/or
Acrobat are you using?
What printer driver are you using? The "Adobe PDF" virtual printer that
gets installed in the FrameMaker install?
What method are you using to generate the PDF? Save As PDF? Print to
"Adobe PDF" virtual printer? Print to PostScript file then distill to
PDF?
-Fred Ridder

Frame closes when generating pdf

[Christiane Crety (CC)]

Yes, I can reproduce it. I have only seen it with one of my FM books, and it 
happens everytime I generate a pdf from that book.

-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com] 
Sent: Thursday, April 22, 2010 3:29 PM
To: Christiane Crety (CC)
Cc: framers at lists.frameusers.com
Subject: Re: Frame closes when generating pdf

Good question. I have seen the same error in Frame 7.2 occasionally
when generating on-line help using WebWorks ePublisher, probably
during the printing/rasterization stage.

It indicates Frame is trying to close during the operation. In my case
it is not reproducible (doesn't happen very often). Can you reproduce
it on a particular Frame file or book?

On Thu, Apr 22, 2010 at 6:15 AM, Christiane Crety (CC)  wrote:
> Hi Framers.
>
>
>
> FM 8.0p277 on Windows XP.
>
> I have a strange problem with one of my FM books:
>
> When I generate a pdf from this book, I get a popup saying "Cannot
> quit". But I didn't tell FM to quit! Then when I click OK (which is the
> only option), I'm asked if I want to save my files. I can click
> "Cancel", so it's no big problem, but I'm just curious why this is
> happening? Does anyone have an answer?
>
> The pdf generates fine, so nothing wrong there...
>
>
>
> Thanks,
>
> Christiane
>
> Christiane Crety
> Technical Writer
>
> T +45 39 55 86 82
> E cc at thrane.com <mailto:xxx at thrane.com>
>
> Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
> DK-2800 ?Kgs. Lyngby, Denmark - www.thrane.com
> T +45 39 55 88 00 - F +45 39 55 88 88
>
>
>
>
>
>
>
> ___
>
>
> You are currently subscribed to framers as dr_gonzo at pobox.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>



-- 

Steve Johnson, dr_gonzo at pobox.com

Frame closes when generating pdf

[Christiane Crety (CC)]

Hi Framers.



FM 8.0p277 on Windows XP.

I have a strange problem with one of my FM books: 

When I generate a pdf from this book, I get a popup saying "Cannot
quit". But I didn't tell FM to quit! Then when I click OK (which is the
only option), I'm asked if I want to save my files. I can click
"Cancel", so it's no big problem, but I'm just curious why this is
happening? Does anyone have an answer?

The pdf generates fine, so nothing wrong there...



Thanks,

Christiane

Christiane Crety 
Technical Writer 

T +45 39 55 86 82 
E cc at thrane.com   

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D 
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com 
T +45 39 55 88 00 - F +45 39 55 88 88 

First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Hi Framers.



FM 8.0p277 on Windows XP.

Strange error when generating a pdf file from an FM book:

The first referenced graphic in the book becomes gray (like unresolved
graphics references) in the pdf, but not in FM.

It has nothing to do with the graphic itself. I can move the graphic
after the other graphics and it looks fine. I can put another graphic in
the first anchored frame, and the same problem occurs: it appears as a
gray box in the pdf. I can delete the first anchored frame and the new
first graphic turns gray. It is always the first referenced graphic in
the pdf that turns gray.

Has anyone else seen this behavior? Is there anything I can do to fix
it?

Thanks,

Christiane

Christiane Crety 
Technical Writer 

T +45 39 55 86 82 
E cc at thrane.com   

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D 
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com 
T +45 39 55 88 00 - F +45 39 55 88 88 

RE: First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

No it is not the same, I just tried printing to PS and then distilling
and that works fine! I guess that's what I'll have to do then :-)

-Christiane

-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com] 
Sent: Thursday, April 22, 2010 4:05 PM
To: Christiane Crety (CC)
Cc: Fred Ridder; framers@lists.frameusers.com
Subject: Re: First referenced graphic in pdf turns gray

Is it the same if you print to PS and distill the PS?

On Thu, Apr 22, 2010 at 8:56 AM, Christiane Crety (CC) 
wrote:
> Sorry! Here is some additional information:
>
>
>
> Acrobat: Full version (Acrobat 9 Pro)
>
> Adobe Distiller 9 (version 9.3.2163)
>
> Driver: Adobe PDF converter
>
> Method: Save as PDF
>
>
>
> Usually this setup works fine for me, but I've had this error a couple
> of times in different books.
>
>
>
> - Christiane Crety
>
>
>
> From: Fred Ridder [mailto:docu...@hotmail.com]
> Sent: Thursday, April 22, 2010 3:17 PM
> To: Christiane Crety (CC); framers@lists.frameusers.com
> Subject: RE: First referenced graphic in pdf turns gray
>
>
>
> Christiane Crety wrote:
>
>> FM 8.0p277 on Windows XP.
>>
>> Strange error when generating a pdf file from an FM book:
>>
>> The first referenced graphic in the book becomes gray (like
unresolved
>> graphics references) in the pdf, but not in FM.
>>
>> It has nothing to do with the graphic itself. I can move the graphic
>> after the other graphics and it looks fine. I can put another graphic
> in
>> the first anchored frame, and the same problem occurs: it appears as
a
>> gray box in the pdf. I can delete the first anchored frame and the
new
>> first graphic turns gray. It is always the first referenced graphic
in
>> the pdf that turns gray.
>
> In order to provide meaningful suggestions, we need to know more
> details, including:
> Do you have the full version of Acrobat or do you have only the
> Distiller bundled with FrameMaker? What version of Distiller and/or
> Acrobat are you using?
> What printer driver are you using? The "Adobe PDF" virtual printer
that
> gets installed in the FrameMaker install?
> What method are you using to generate the PDF? Save As PDF? Print to
> "Adobe PDF" virtual printer? Print to PostScript file then distill to
> PDF?
> -Fred Ridder
>
>
>
> ___
>
>
> You are currently subscribed to framers as dr_go...@pobox.com.
>
> Send list messages to fram...@lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscr...@lists.frameusers.com
> or visit
http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com
>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>



-- 

Steve Johnson, dr_go...@pobox.com
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Sorry! Here is some additional information:

 

Acrobat: Full version (Acrobat 9 Pro)

Adobe Distiller 9 (version 9.3.2163)

Driver: Adobe PDF converter

Method: Save as PDF

 

Usually this setup works fine for me, but I've had this error a couple
of times in different books.

 

- Christiane Crety

 

From: Fred Ridder [mailto:docu...@hotmail.com] 
Sent: Thursday, April 22, 2010 3:17 PM
To: Christiane Crety (CC); framers@lists.frameusers.com
Subject: RE: First referenced graphic in pdf turns gray

 

Christiane Crety wrote:
 
> FM 8.0p277 on Windows XP.
> 
> Strange error when generating a pdf file from an FM book:
> 
> The first referenced graphic in the book becomes gray (like unresolved
> graphics references) in the pdf, but not in FM.
> 
> It has nothing to do with the graphic itself. I can move the graphic
> after the other graphics and it looks fine. I can put another graphic
in
> the first anchored frame, and the same problem occurs: it appears as a
> gray box in the pdf. I can delete the first anchored frame and the new
> first graphic turns gray. It is always the first referenced graphic in
> the pdf that turns gray.

In order to provide meaningful suggestions, we need to know more
details, including:
Do you have the full version of Acrobat or do you have only the
Distiller bundled with FrameMaker? What version of Distiller and/or
Acrobat are you using?
What printer driver are you using? The "Adobe PDF" virtual printer that
gets installed in the FrameMaker install?
What method are you using to generate the PDF? Save As PDF? Print to
"Adobe PDF" virtual printer? Print to PostScript file then distill to
PDF?
-Fred Ridder
 
 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Frame closes when generating pdf

[Christiane Crety (CC)]

Yes, I can reproduce it. I have only seen it with one of my FM books, and it 
happens everytime I generate a pdf from that book.

-Original Message-
From: Steve Johnson [mailto:chinask...@gmail.com] 
Sent: Thursday, April 22, 2010 3:29 PM
To: Christiane Crety (CC)
Cc: framers@lists.frameusers.com
Subject: Re: Frame closes when generating pdf

Good question. I have seen the same error in Frame 7.2 occasionally
when generating on-line help using WebWorks ePublisher, probably
during the printing/rasterization stage.

It indicates Frame is trying to close during the operation. In my case
it is not reproducible (doesn't happen very often). Can you reproduce
it on a particular Frame file or book?

On Thu, Apr 22, 2010 at 6:15 AM, Christiane Crety (CC)  wrote:
> Hi Framers.
>
>
>
> FM 8.0p277 on Windows XP.
>
> I have a strange problem with one of my FM books:
>
> When I generate a pdf from this book, I get a popup saying "Cannot
> quit". But I didn't tell FM to quit! Then when I click OK (which is the
> only option), I'm asked if I want to save my files. I can click
> "Cancel", so it's no big problem, but I'm just curious why this is
> happening? Does anyone have an answer?
>
> The pdf generates fine, so nothing wrong there...
>
>
>
> Thanks,
>
> Christiane
>
> Christiane Crety
> Technical Writer
>
> T +45 39 55 86 82
> E c...@thrane.com <mailto:x...@thrane.com>
>
> Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
> DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
> T +45 39 55 88 00 - F +45 39 55 88 88
>
>
>
>
>
>
>
> ___
>
>
> You are currently subscribed to framers as dr_go...@pobox.com.
>
> Send list messages to fram...@lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscr...@lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/dr_gonzo%40pobox.com
>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>



-- 

Steve Johnson, dr_go...@pobox.com
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Frame closes when generating pdf

[Christiane Crety (CC)]

Hi Framers.

 

FM 8.0p277 on Windows XP.

I have a strange problem with one of my FM books: 

When I generate a pdf from this book, I get a popup saying "Cannot
quit". But I didn't tell FM to quit! Then when I click OK (which is the
only option), I'm asked if I want to save my files. I can click
"Cancel", so it's no big problem, but I'm just curious why this is
happening? Does anyone have an answer?

The pdf generates fine, so nothing wrong there...

 

Thanks,

Christiane

Christiane Crety 
Technical Writer 

T +45 39 55 86 82 
E c...@thrane.com   

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D 
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com 
T +45 39 55 88 00 - F +45 39 55 88 88 

 

 

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

First referenced graphic in pdf turns gray

[Christiane Crety (CC)]

Hi Framers.

 

FM 8.0p277 on Windows XP.

Strange error when generating a pdf file from an FM book:

The first referenced graphic in the book becomes gray (like unresolved
graphics references) in the pdf, but not in FM.

It has nothing to do with the graphic itself. I can move the graphic
after the other graphics and it looks fine. I can put another graphic in
the first anchored frame, and the same problem occurs: it appears as a
gray box in the pdf. I can delete the first anchored frame and the new
first graphic turns gray. It is always the first referenced graphic in
the pdf that turns gray.

Has anyone else seen this behavior? Is there anything I can do to fix
it?

Thanks,

Christiane

Christiane Crety 
Technical Writer 

T +45 39 55 86 82 
E c...@thrane.com   

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D 
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com 
T +45 39 55 88 00 - F +45 39 55 88 88 

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FW: FM 7.2 updates

[Christiane Crety (CC)]

Oops, sorry! It seems the update (7.2b144) was installed after all, even
though I got the message that it couldn't! So now I'll go on to
7.2p158... :-)
Thanks!

Christiane



From: Yves Barbion [mailto:yves.barb...@gmail.com] 
Sent: Thursday, September 13, 2007 2:24 PM
To: Christiane Crety (CC)
Cc: framers at lists.frameusers.com
Subject: Re: FM 7.2 updates


Hi Christiane,

as far as I know, there are only two patches for FM 7.2. So just install
7.2b144 first and then 7.2p158 and you should be fine.

You can find 7.2p158 here:

http://www.adobe.com/support/downloads/detail.jsp?ftpID=3332

Kind regards




-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor




On 9/13/07, Christiane Crety (CC)  wrote: 

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at
Adobes
site to get the latest updates. However, it seems that you
cannot get 
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82
E cc at thrane.com <mailto:xxx at thrane.com>

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88


___


You are currently subscribed to Framers as
yves.barbion at gmail.com .

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com 
or visit
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail
.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.





-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor


Scripto bvba
Asselsstraat 65
9031 Gent
Belgium
T: +32 494 12 01 89
F: +32 9 366 50 23 
BTW (VAT) BE 0886.192.394
skype: yves.barbion
 

FM 7.2 updates

[Christiane Crety (CC)]

Hi, Yves,

Thanks, but that's what I tried to do. I got a message saying that the
7.2b144 update requires that you have 7.2b128 installed first (which I
don't).

Christiane




From: Yves Barbion [mailto:yves.barb...@gmail.com] 
Sent: Thursday, September 13, 2007 2:24 PM
To: Christiane Crety (CC)
Cc: framers at lists.frameusers.com
Subject: Re: FM 7.2 updates


Hi Christiane,

as far as I know, there are only two patches for FM 7.2. So just install
7.2b144 first and then 7.2p158 and you should be fine.

You can find 7.2p158 here:

http://www.adobe.com/support/downloads/detail.jsp?ftpID=3332

Kind regards




-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor




On 9/13/07, Christiane Crety (CC)  wrote: 

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at
Adobes
site to get the latest updates. However, it seems that you
cannot get 
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82
E cc at thrane.com <mailto:xxx at thrane.com>

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88


___


You are currently subscribed to Framers as
yves.barbion at gmail.com .

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com 
or visit
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail
.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.





-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor


Scripto bvba
Asselsstraat 65
9031 Gent
Belgium
T: +32 494 12 01 89
F: +32 9 366 50 23 
BTW (VAT) BE 0886.192.394
skype: yves.barbion
 

FM 7.2 updates

[Christiane Crety (CC)]

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at Adobes
site to get the latest updates. However, it seems that you cannot get
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82 
E cc at thrane.com  

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88

FW: FM 7.2 updates

[Christiane Crety (CC)]

Oops, sorry! It seems the update (7.2b144) was installed after all, even
though I got the message that it couldn't! So now I'll go on to
7.2p158... :-)
Thanks!
 
Christiane



From: Yves Barbion [mailto:[EMAIL PROTECTED] 
Sent: Thursday, September 13, 2007 2:24 PM
To: Christiane Crety (CC)
Cc: framers@lists.frameusers.com
Subject: Re: FM 7.2 updates


Hi Christiane,
 
as far as I know, there are only two patches for FM 7.2. So just install
7.2b144 first and then 7.2p158 and you should be fine.
 
You can find 7.2p158 here:
 
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3332
 
Kind regards
 



-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor



 
On 9/13/07, Christiane Crety (CC) <[EMAIL PROTECTED]> wrote: 

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at
Adobes
site to get the latest updates. However, it seems that you
cannot get 
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82
E [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88


___


You are currently subscribed to Framers as
[EMAIL PROTECTED] .

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED] 
or visit
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail
.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.





-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor


Scripto bvba
Asselsstraat 65
9031 Gent
Belgium
T: +32 494 12 01 89
F: +32 9 366 50 23 
BTW (VAT) BE 0886.192.394
skype: yves.barbion
 
___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

RE: FM 7.2 updates

[Christiane Crety (CC)]

Hi, Yves,
 
Thanks, but that's what I tried to do. I got a message saying that the
7.2b144 update requires that you have 7.2b128 installed first (which I
don't).
 
Christiane
 



From: Yves Barbion [mailto:[EMAIL PROTECTED] 
Sent: Thursday, September 13, 2007 2:24 PM
To: Christiane Crety (CC)
Cc: framers@lists.frameusers.com
Subject: Re: FM 7.2 updates


Hi Christiane,
 
as far as I know, there are only two patches for FM 7.2. So just install
7.2b144 first and then 7.2p158 and you should be fine.
 
You can find 7.2p158 here:
 
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3332
 
Kind regards
 



-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor



 
On 9/13/07, Christiane Crety (CC) <[EMAIL PROTECTED]> wrote: 

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at
Adobes
site to get the latest updates. However, it seems that you
cannot get 
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82
E [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88


___


You are currently subscribed to Framers as
[EMAIL PROTECTED] .

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED] 
or visit
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail
.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.





-- 
Yves Barbion 
Documentation Architect
Adobe-Certified FrameMaker Instructor


Scripto bvba
Asselsstraat 65
9031 Gent
Belgium
T: +32 494 12 01 89
F: +32 9 366 50 23 
BTW (VAT) BE 0886.192.394
skype: yves.barbion
 
___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

FM 7.2 updates

[Christiane Crety (CC)]

Hi Framers,

I just got a new PC, reinstalled FrameMaker 7.2 and looked at Adobes
site to get the latest updates. However, it seems that you cannot get
updates earlier than 7.2b144, and 7.2b144 requires that you have
7.2b128. Anyone knows how to deal with this?
Thanks!

Best regards,

Christiane Crety
Technical Writer

T +45 39 55 86 82 
E [EMAIL PROTECTED]  

Thrane & Thrane A/S - Lundtoftegaardsvej 93 D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F +45 39 55 88 88


___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

CMYK/RGB conversion

[Christiane Crety (CC)]

Hi Martin,

I'm glad to hear that. I'll continue with these settings and see how it
works out...
Thanks again!

Christiane

-Original Message-
From: Aronsson, Martin [mailto:martin.arons...@sonyericsson.com] 
Sent: 9. november 2006 10:04
To: Christiane Crety (CC); Framers at frameusers.com
Subject: RE: CMYK/RGB conversion 

Hi again,

I'm glad it was of help to you Christiane. I double-checked here on my
files again and when checking the black text elements in the Preflight
tool Enfocus Pitstop, it is reported as (as you say) "Gray" with 0%
"Brightness". Although when using the Output Preview advanced function
in Acrobat 7 Pro itself, the same elements are reported as "Process
Black 100%" (when holding the mouse pointer over those elements). I
don't do any color conversion in the Distiller settings.

I don't know why it is reported with different names in the two tools
(maybe someone else can explain this?), but I am almost sure it wont
create any problems in the printing process anyway.

/Martin

CMYK/RGB conversion

[Christiane Crety (CC)]

Thanks a lot, Martin! 
You were right about my printer settings. I changed them and it did make a 
difference. However, when I check the text color, it is not defined as CMYK, 
but as "Grey 0%". Could it be my Distiller settings that are not correct? Or is 
the "Grey 0%" really the same as K=0? 
I'm not exactly an expert on colors, as you may have noticed. But I would 
really like to understand the basics, so that I can get my settings right for 
the print shop.

Thanks again.

Christiane


-Original Message-
From: Aronsson, Martin [mailto:martin.arons...@sonyericsson.com] 
Sent: 8. november 2006 11:53
To: Christiane Crety (CC); Framers at frameusers.com
Subject: RE: CMYK/RGB conversion 

Christiane,

I assume you use Windows and that you print your Framemaker-book to PostScript 
via an installed PostScript printer.
In Control Panel, right click the PostScript printer and choose Properties -> 
Device Settings. Make sure "Convert Gray Text to PostScript Gray" and "Convert 
Gray Graphics to PostScript Gray" are set to Yes. If they were set to No, I 
think this is what is causing the problem with your black text getting 
converted to RGB. Changing it to Yes should prevent this. I have those options 
set to Yes and black text is correctly preserved as K=100% from Frame to PDF 
(while all other use of colours in text-elements gets converted to RGB).

More info on this:
"True gray" support options for both vector graphics and text. Defaulted to 
"no" values, when set to "yes" the "Convert Gray Text to PostScript Gray" and 
"Convert Gray Graphics to PostScript Gray" assume that for all text and vector 
graphics objects respectively, color values in which the red (R), green (G), 
and blue (B) values match are really an expression of grayscale as opposed to 
RGB color. The default "no" results in those RGB values passed through to the 
printer or Distiller as-is. The "yes" value can dramatically improve output 
quality for black and grayscale text and vector graphics for PostScript color 
printers that do not automatically make assumptions about and convert R=G=B 
values to K values. The "yes" value also assists in creating prepress-friendly 
PostScript and PDF from applications that do not generate their own PostScript 
(including Adobe FrameMaker, Microsoft Office, and other popular office suite 
and productivity programs). [I recommend that users always set these values to 
"yes" - Dov.]
Source: http://www.planetpdf.com/mainpage.asp?webpageid=1509

Good luck,
/Martin

> -Original Message-
> From: 
> framers-bounces+martin.aronsson=sonyericsson.com at lists.frameus
> ers.com 
> [mailto:framers-bounces+martin.aronsson=sonyericsson.com at lists
.frameusers.com] On Behalf Of Christiane Crety (CC)
> Sent: tisdag den 7 november 2006 16:08
> To: Framers at frameusers.com
> Subject: CMYK/RGB conversion 
> 
> Hi Framers,
> 
> Using FM 7.2 and Distiller 7.0 to create pdf for print.
> I have some trouble trying to figure out how to cope with the 
> "convert to RGB" problem with FrameMaker.
> When I generate pdf files from FrameMaker, some of the colors 
> are converted to RGB.
> If I select the Distiller option "Convert all colors to CMYK" 
> I avoid the RGB, but the colors are not defined the way they 
> were in FM. For example, my black text is C=0%, M=0%, Y=0%, 
> K=100% in FrameMaker, but C=74.9%, M=67.8%, Y=67.1% and 
> K=90.2% in the pdf file.
> 
> I know there are also tools that can convert to CMYK after 
> creating the pdf file, but I would really prefer it if the 
> Distiller could take care of it...
> 
> Does anyone know how to keep the original CMYK values in the 
> pdf output? I'm pulling my hair out
> 
> Thanks in advance!
> 
> 
> Christiane Crety
> Technical Writer
> 
> T + 45?39?55?86?82
> E cc at thrane.com
> 
> Thrane & Thrane A/S - Lundtoftegaardsvej 93D DK-2800  Kgs. 
> Lyngby, Denmark - www.thrane.com T +45 39 55 88 00 - F + 45 
> 39 55 88 88
> 
> ___
> 
> 
> You are currently subscribed to Framers as 
> martin.aronsson at sonyericsson.com.
> 
> Send list messages to framers at lists.frameusers.com.
> 
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/martin.aro
> nsson%40sonyericsson.com
> 
> Send administrative questions to listadmin at frameusers.com. 
> Visit http://www.frameusers.com/ for more resources and info.
> 

RE: CMYK/RGB conversion

[Christiane Crety \(CC\)]

Hi Martin,

I'm glad to hear that. I'll continue with these settings and see how it
works out...
Thanks again!

Christiane

-Original Message-
From: Aronsson, Martin [mailto:[EMAIL PROTECTED] 
Sent: 9. november 2006 10:04
To: Christiane Crety (CC); Framers@frameusers.com
Subject: RE: CMYK/RGB conversion 

Hi again,

I'm glad it was of help to you Christiane. I double-checked here on my
files again and when checking the black text elements in the Preflight
tool Enfocus Pitstop, it is reported as (as you say) "Gray" with 0%
"Brightness". Although when using the Output Preview advanced function
in Acrobat 7 Pro itself, the same elements are reported as "Process
Black 100%" (when holding the mouse pointer over those elements). I
don't do any color conversion in the Distiller settings.

I don't know why it is reported with different names in the two tools
(maybe someone else can explain this?), but I am almost sure it wont
create any problems in the printing process anyway.

/Martin

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

RE: CMYK/RGB conversion

[Christiane Crety \(CC\)]

Thanks a lot, Martin! 
You were right about my printer settings. I changed them and it did make a 
difference. However, when I check the text color, it is not defined as CMYK, 
but as "Grey 0%". Could it be my Distiller settings that are not correct? Or is 
the "Grey 0%" really the same as K=0? 
I'm not exactly an expert on colors, as you may have noticed. But I would 
really like to understand the basics, so that I can get my settings right for 
the print shop.

Thanks again.

Christiane


-Original Message-
From: Aronsson, Martin [mailto:[EMAIL PROTECTED] 
Sent: 8. november 2006 11:53
To: Christiane Crety (CC); Framers@frameusers.com
Subject: RE: CMYK/RGB conversion 

Christiane,

I assume you use Windows and that you print your Framemaker-book to PostScript 
via an installed PostScript printer.
In Control Panel, right click the PostScript printer and choose Properties -> 
Device Settings. Make sure "Convert Gray Text to PostScript Gray" and "Convert 
Gray Graphics to PostScript Gray" are set to Yes. If they were set to No, I 
think this is what is causing the problem with your black text getting 
converted to RGB. Changing it to Yes should prevent this. I have those options 
set to Yes and black text is correctly preserved as K=100% from Frame to PDF 
(while all other use of colours in text-elements gets converted to RGB).

More info on this:
"True gray" support options for both vector graphics and text. Defaulted to 
"no" values, when set to "yes" the "Convert Gray Text to PostScript Gray" and 
"Convert Gray Graphics to PostScript Gray" assume that for all text and vector 
graphics objects respectively, color values in which the red (R), green (G), 
and blue (B) values match are really an expression of grayscale as opposed to 
RGB color. The default "no" results in those RGB values passed through to the 
printer or Distiller as-is. The "yes" value can dramatically improve output 
quality for black and grayscale text and vector graphics for PostScript color 
printers that do not automatically make assumptions about and convert R=G=B 
values to K values. The "yes" value also assists in creating prepress-friendly 
PostScript and PDF from applications that do not generate their own PostScript 
(including Adobe FrameMaker, Microsoft Office, and other popular office suite 
and productivity programs). [I recommend that users always set these values to 
"yes" - Dov.]
Source: http://www.planetpdf.com/mainpage.asp?webpageid=1509

Good luck,
/Martin

> -----Original Message-
> From: 
> [EMAIL PROTECTED]
> ers.com 
> [mailto:[EMAIL PROTECTED]
.frameusers.com] On Behalf Of Christiane Crety (CC)
> Sent: tisdag den 7 november 2006 16:08
> To: Framers@frameusers.com
> Subject: CMYK/RGB conversion 
> 
> Hi Framers,
> 
> Using FM 7.2 and Distiller 7.0 to create pdf for print.
> I have some trouble trying to figure out how to cope with the 
> "convert to RGB" problem with FrameMaker.
> When I generate pdf files from FrameMaker, some of the colors 
> are converted to RGB.
> If I select the Distiller option "Convert all colors to CMYK" 
> I avoid the RGB, but the colors are not defined the way they 
> were in FM. For example, my black text is C=0%, M=0%, Y=0%, 
> K=100% in FrameMaker, but C=74.9%, M=67.8%, Y=67.1% and 
> K=90.2% in the pdf file.
> 
> I know there are also tools that can convert to CMYK after 
> creating the pdf file, but I would really prefer it if the 
> Distiller could take care of it...
> 
> Does anyone know how to keep the original CMYK values in the 
> pdf output? I'm pulling my hair out
> 
> Thanks in advance!
> 
> 
> Christiane Crety
> Technical Writer
> 
> T + 45 39 55 86 82
> E [EMAIL PROTECTED]
> 
> Thrane & Thrane A/S - Lundtoftegaardsvej 93D DK-2800  Kgs. 
> Lyngby, Denmark - www.thrane.com T +45 39 55 88 00 - F + 45 
> 39 55 88 88
> 
> ___
> 
> 
> You are currently subscribed to Framers as 
> [EMAIL PROTECTED]
> 
> Send list messages to [EMAIL PROTECTED]
> 
> To unsubscribe send a blank email to
> [EMAIL PROTECTED]
> or visit 
> http://lists.frameusers.com/mailman/options/framers/martin.aro
> nsson%40sonyericsson.com
> 
> Send administrative questions to [EMAIL PROTECTED] 
> Visit http://www.frameusers.com/ for more resources and info.
> 
___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

CMYK/RGB conversion

[Christiane Crety (CC)]

Thanks Richard - I was afraid that would be the case!

I guess I was just hoping there would be some magic Distiller setting
that could bring back my CMYK ;-) At least I would think that an
"absolute" color like black should be easily converted to RGB and back
to CMYK. When I select "Leave color unchanged" in the Distiller the RGB
color is R=0%, G=0%, B=0% as it should be - so it is the conversion back
to CMYK that I can't get right...

What I don't understand is how other people cope with this? There must
be at least a million people out there who need to deliver "all CMYK"
documents to their print shop?

Best regards,

Christiane




-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com] 
Sent: 7. november 2006 19:16
To: Christiane Crety (CC); Framers at frameusers.com
Subject: RE: CMYK/RGB conversion 

Christiane Crety wrote:

> I know there are also tools that can convert to CMYK after 
> creating the pdf file, but I would really prefer it if the 
> Distiller could take care of it...
> 
> Does anyone know how to keep the original CMYK values in the 
> pdf output? I'm pulling my hair out

I'm not an expert, but I haven't seen any other responses, so here's my
(limited) understanding of this issue: 

You can't stay in the CMYK color space on a Windows machine because FM
doesn't have its own print engine -- it uses the Windows GDI (even to
"print" to Distiller). That means everything except EPS graphics (and
maybe imported PDFs) is converted to RGB first. 

The conversion from RGB back to CMYK is of necessity not perfect --
although the values you cite strike me as unusually far off. Maybe
someone knows what settings will get you closer. 

But I suspect you really need those post-processing tools you'd prefer
to avoid. :-}

HTH!
Richard


--
Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-777-0436
--

RE: CMYK/RGB conversion

[Christiane Crety \(CC\)]

Thanks Richard - I was afraid that would be the case!

I guess I was just hoping there would be some magic Distiller setting
that could bring back my CMYK ;-) At least I would think that an
"absolute" color like black should be easily converted to RGB and back
to CMYK. When I select "Leave color unchanged" in the Distiller the RGB
color is R=0%, G=0%, B=0% as it should be - so it is the conversion back
to CMYK that I can't get right...

What I don't understand is how other people cope with this? There must
be at least a million people out there who need to deliver "all CMYK"
documents to their print shop?

Best regards,

Christiane




-Original Message-
From: Combs, Richard [mailto:[EMAIL PROTECTED] 
Sent: 7. november 2006 19:16
To: Christiane Crety (CC); Framers@frameusers.com
Subject: RE: CMYK/RGB conversion 

Christiane Crety wrote:
 
> I know there are also tools that can convert to CMYK after 
> creating the pdf file, but I would really prefer it if the 
> Distiller could take care of it...
> 
> Does anyone know how to keep the original CMYK values in the 
> pdf output? I'm pulling my hair out

I'm not an expert, but I haven't seen any other responses, so here's my
(limited) understanding of this issue: 

You can't stay in the CMYK color space on a Windows machine because FM
doesn't have its own print engine -- it uses the Windows GDI (even to
"print" to Distiller). That means everything except EPS graphics (and
maybe imported PDFs) is converted to RGB first. 

The conversion from RGB back to CMYK is of necessity not perfect --
although the values you cite strike me as unusually far off. Maybe
someone knows what settings will get you closer. 

But I suspect you really need those post-processing tools you'd prefer
to avoid. :-}

HTH!
Richard


--
Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-777-0436
--




 
___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

CMYK/RGB conversion

[Christiane Crety (CC)]

Hi Framers,

Using FM 7.2 and Distiller 7.0 to create pdf for print.
I have some trouble trying to figure out how to cope with the "convert to RGB" 
problem with FrameMaker.
When I generate pdf files from FrameMaker, some of the colors are converted to 
RGB.
If I select the Distiller option "Convert all colors to CMYK" I avoid the RGB, 
but the colors are not defined the way they were in FM. For example, my black 
text is 
C=0%, M=0%, Y=0%, K=100% in FrameMaker, but 
C=74.9%, M=67.8%, Y=67.1% and K=90.2% in the pdf file.

I know there are also tools that can convert to CMYK after creating the pdf 
file, but I would really prefer it if the Distiller could take care of it...

Does anyone know how to keep the original CMYK values in the pdf output? I'm 
pulling my hair out

Thanks in advance!


Christiane Crety
Technical Writer

T + 45?39?55?86?82
E cc at thrane.com

Thrane & Thrane A/S - Lundtoftegaardsvej 93D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F + 45 39 55 88 88

CMYK/RGB conversion

[Christiane Crety \(CC\)]

Hi Framers,

Using FM 7.2 and Distiller 7.0 to create pdf for print.
I have some trouble trying to figure out how to cope with the "convert to RGB" 
problem with FrameMaker.
When I generate pdf files from FrameMaker, some of the colors are converted to 
RGB.
If I select the Distiller option "Convert all colors to CMYK" I avoid the RGB, 
but the colors are not defined the way they were in FM. For example, my black 
text is 
C=0%, M=0%, Y=0%, K=100% in FrameMaker, but 
C=74.9%, M=67.8%, Y=67.1% and K=90.2% in the pdf file.

I know there are also tools that can convert to CMYK after creating the pdf 
file, but I would really prefer it if the Distiller could take care of it...

Does anyone know how to keep the original CMYK values in the pdf output? I'm 
pulling my hair out

Thanks in advance!


Christiane Crety
Technical Writer

T + 45 39 55 86 82
E [EMAIL PROTECTED]

Thrane & Thrane A/S - Lundtoftegaardsvej 93D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F + 45 39 55 88 88

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

Unavailable font - not so solved ;-)

[Christiane Crety (CC)]

Hi all,

It seems I was a bit to fast there - my problem was only solved until
next restart of FrameMaker! Sorry about that...
I guess I'll just leave it at that.

Best regards,

Christiane

-Original Message-
From: obair [mailto:obai...@comcast.net] 
Sent: 1. maj 2006 14:51
To: Christiane Crety (CC)
Subject: Re: Unavailable font - solved

How did you find it?


On 1 Beal 2006, at 4:13 am, Christiane Crety ((CC)) wrote:

> Thanks for your help everybody.
>
> The font turned out to be hidden in a graphic frame, as Fred Ridder
> suggested. I cleaned up all my graphic frames and next time I
generated
> a pdf no FM Console appeared!
>
> Thanks again...
>
>
>
> Christiane
>
>
>
> Christiane Crety
>
> Technical Writer
>
>
>
> T + 45 39 55 86 82
>
> E cc at thrane.com <mailto:cc at thrane.com>
>
>
>
> Thrane & Thrane A/S - Lundtoftegaardsvej 93D
>
> DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
>
> T +45 39 55 88 00 - F + 45 39 55 88 88
>
>
>
> ___
>
>
> You are currently subscribed to Framers as obair81 at comcast.net.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit  
> http://lists.frameusers.com/mailman/options/framers/ 
> obair81%40comcast.net
>
> Send administrative questions to lisa at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>

Unavailable font - solved

[Christiane Crety (CC)]

Thanks for your help everybody.

The font turned out to be hidden in a graphic frame, as Fred Ridder
suggested. I cleaned up all my graphic frames and next time I generated
a pdf no FM Console appeared!

Thanks again...



Christiane 



Christiane Crety

Technical Writer



T + 45 39 55 86 82

E cc at thrane.com  



Thrane & Thrane A/S - Lundtoftegaardsvej 93D

DK-2800  Kgs. Lyngby, Denmark - www.thrane.com

T +45 39 55 88 00 - F + 45 39 55 88 88

RE: Unavailable font - not so solved ;-)

[Christiane Crety \(CC\)]

Hi all,

It seems I was a bit to fast there - my problem was only solved until
next restart of FrameMaker! Sorry about that...
I guess I'll just leave it at that.

Best regards,

Christiane

-Original Message-
From: obair [mailto:[EMAIL PROTECTED] 
Sent: 1. maj 2006 14:51
To: Christiane Crety (CC)
Subject: Re: Unavailable font - solved

How did you find it?


On 1 Beal 2006, at 4:13 am, Christiane Crety ((CC)) wrote:

> Thanks for your help everybody.
>
> The font turned out to be hidden in a graphic frame, as Fred Ridder
> suggested. I cleaned up all my graphic frames and next time I
generated
> a pdf no FM Console appeared!
>
> Thanks again...
>
>
>
> Christiane
>
>
>
> Christiane Crety
>
> Technical Writer
>
>
>
> T + 45 39 55 86 82
>
> E [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>
>
>
> Thrane & Thrane A/S - Lundtoftegaardsvej 93D
>
> DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
>
> T +45 39 55 88 00 - F + 45 39 55 88 88
>
>
>
> ___
>
>
> You are currently subscribed to Framers as [EMAIL PROTECTED]
>
> Send list messages to [EMAIL PROTECTED]
>
> To unsubscribe send a blank email to
> [EMAIL PROTECTED]
> or visit  
> http://lists.frameusers.com/mailman/options/framers/ 
> obair81%40comcast.net
>
> Send administrative questions to [EMAIL PROTECTED] Visit
> http://www.frameusers.com/ for more resources and info.
>

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

Unavailable font - solved

[Christiane Crety \(CC\)]

Thanks for your help everybody.

The font turned out to be hidden in a graphic frame, as Fred Ridder
suggested. I cleaned up all my graphic frames and next time I generated
a pdf no FM Console appeared!

Thanks again...

 

Christiane 

 

Christiane Crety

Technical Writer

 

T + 45 39 55 86 82

E [EMAIL PROTECTED]  

 

Thrane & Thrane A/S - Lundtoftegaardsvej 93D

DK-2800  Kgs. Lyngby, Denmark - www.thrane.com

T +45 39 55 88 00 - F + 45 39 55 88 88

 

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

Unavailable font

[Christiane Crety (CC)]

Hi,



I am using "Save as pdf" for an FM 7.2 book. 

I am wondering why each time I save as pdf the FrameMaker Console says:

"The "Times" Font is not available."Times New Roman" will be used in
this session."

As far as I know I am not using Times in my FM book. Where could this be
coming from? I have used "Find Character Format" to search for the font,
but have not found it. I have also used the Find function in Master
pages and Reference pages with no success.

This is not a showstopper, of cause, but just a small annoyance. 

Anybody have any idea where this could come from?



Thanks!



Christiane



Christiane Crety

Technical Writer



T + 45 39 55 86 82

E cc at thrane.com  



Thrane & Thrane A/S - Lundtoftegaardsvej 93D

DK-2800  Kgs. Lyngby, Denmark - www.thrane.com

T +45 39 55 88 00 - F + 45 39 55 88 88

Unavailable font

[Christiane Crety \(CC\)]

Hi,

 

I am using "Save as pdf" for an FM 7.2 book. 

I am wondering why each time I save as pdf the FrameMaker Console says:

"The "Times" Font is not available."Times New Roman" will be used in
this session."

As far as I know I am not using Times in my FM book. Where could this be
coming from? I have used "Find Character Format" to search for the font,
but have not found it. I have also used the Find function in Master
pages and Reference pages with no success.

This is not a showstopper, of cause, but just a small annoyance. 

Anybody have any idea where this could come from?

 

Thanks!

 

Christiane

 

Christiane Crety

Technical Writer

 

T + 45 39 55 86 82

E [EMAIL PROTECTED]  

 

Thrane & Thrane A/S - Lundtoftegaardsvej 93D

DK-2800  Kgs. Lyngby, Denmark - www.thrane.com

T +45 39 55 88 00 - F + 45 39 55 88 88

 

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.

Adding a Blank Page Before/After Book Cover

[Christiane Crety (CC)]

Hi Angela,

I get a separate pdf from our Marketing dep. containing the front page for my 
manual. 
Here is how I do it:
1. Put an empty page in my FM file where the front page should be.
2. Create the pdf.
3. Open the manual pdf in Acrobat (Standard).
4. Put the cursor in the first page.
5. Select Document > Pages > Replace.
6. Browse to my front page pdf and insert it.

This way I keep the numbering of pages correct. You should be able to do the 
same with your back cover.

If you need to have a completely blank page, you could place a dedicated 
paragraph format on the page. Then in your reference page, assign your blank 
master page to this paragraph format. This way the blank master page will not 
be overwritten by the default Left/Right master pages, but will stay there 
through all your updates.

Hope this helps!

/Christiane

Christiane Crety
Technical Writer

T + 45?39?55?86?82
E cc at thrane.com

Thrane & Thrane A/S - Lundtoftegaardsvej 93D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F + 45 39 55 88 88

Re: Adding a Blank Page Before/After Book Cover

[Christiane Crety \(CC\)]

Hi Angela,

I get a separate pdf from our Marketing dep. containing the front page for my 
manual. 
Here is how I do it:
1. Put an empty page in my FM file where the front page should be.
2. Create the pdf.
3. Open the manual pdf in Acrobat (Standard).
4. Put the cursor in the first page.
5. Select Document > Pages > Replace.
6. Browse to my front page pdf and insert it.

This way I keep the numbering of pages correct. You should be able to do the 
same with your back cover.

If you need to have a completely blank page, you could place a dedicated 
paragraph format on the page. Then in your reference page, assign your blank 
master page to this paragraph format. This way the blank master page will not 
be overwritten by the default Left/Right master pages, but will stay there 
through all your updates.

Hope this helps!

/Christiane

Christiane Crety
Technical Writer

T + 45 39 55 86 82
E [EMAIL PROTECTED]

Thrane & Thrane A/S - Lundtoftegaardsvej 93D
DK-2800  Kgs. Lyngby, Denmark - www.thrane.com
T +45 39 55 88 00 - F + 45 39 55 88 88

___


You are currently subscribed to Framers as [EMAIL PROTECTED]

Send list messages to [EMAIL PROTECTED]

To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.