OFF-Topic: ripped paper image
Art is correct. You want Snagit. The ripped edge is one of its cool features. Will = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art Campbell Sent: Friday, January 22, 2010 2:09 PM To: Flato, Gillian Cc: framers at lists.frameusers.com Subject: Re: OFF-Topic: ripped paper image SnagIt Editor has this (may be just for borders; I haven't used it), and you can do it with any number of Photoshop frames Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Fri, Jan 22, 2010 at 2:57 PM, Flato, Gillian wrote: > Does anyone know of a tool that allows you to erase part of a graphic > where when you run the brush through the graphic, the remaining visible > graphic looks like you ripped a piece of the graphic out of the middle? > So I want a tool that leaves a jagged edge behind. > > > > Thank you, > > > > > > Gillian Flato > > Technical Writer (Software) > > nanometrics > > 1550 Buckeye Dr. > > Milpitas, CA. 95035 > > *408.545.6316 > > 7 ?408.232.5911 > > * gflato at nanometrics.com <mailto:gflato at nanometrics.com> > > > > > colo1-dmz-mx1.nanometrics.com made the following annotations > - > Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Employees of Nanometrics, Inc. are expressly required not to make defamatory statements and not to infringe or authorize any infringement of copyright or any other legal right by email communications. Any such communication is contrary to company policy and outside the scope of the employment of the individual concerned. The company will not accept any liability in respect of such communication, and the employee responsible will be personally liable for any damages or other liability arising. > - > > ___ > > > You are currently subscribed to Framers as art.campbell at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as Will.husa at 4techwriter.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: OFF-Topic: ripped paper image
Art is correct. You want Snagit. The ripped edge is one of its cool features. Will = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Art Campbell Sent: Friday, January 22, 2010 2:09 PM To: Flato, Gillian Cc: framers@lists.frameusers.com Subject: Re: OFF-Topic: ripped paper image SnagIt Editor has this (may be just for borders; I haven't used it), and you can do it with any number of Photoshop frames Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Fri, Jan 22, 2010 at 2:57 PM, Flato, Gillian wrote: > Does anyone know of a tool that allows you to erase part of a graphic > where when you run the brush through the graphic, the remaining visible > graphic looks like you ripped a piece of the graphic out of the middle? > So I want a tool that leaves a jagged edge behind. > > > > Thank you, > > > > > > Gillian Flato > > Technical Writer (Software) > > nanometrics > > 1550 Buckeye Dr. > > Milpitas, CA. 95035 > > *408.545.6316 > > 7 408.232.5911 > > * gfl...@nanometrics.com <mailto:gfl...@nanometrics.com> > > > > > colo1-dmz-mx1.nanometrics.com made the following annotations > - > Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Employees of Nanometrics, Inc. are expressly required not to make defamatory statements and not to infringe or authorize any infringement of copyright or any other legal right by email communications. Any such communication is contrary to company policy and outside the scope of the employment of the individual concerned. The company will not accept any liability in respect of such communication, and the employee responsible will be personally liable for any damages or other liability arising. > - > > ___ > > > You are currently subscribed to Framers as art.campb...@gmail.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as will.h...@4techwriter.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RoboHelp 6
Art has a good suggestion. Download the Trial version of RH8. It's fully functional. I played with it last month when I was evaluating RH8 vs MadCap Flare 5. = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art Campbell Sent: Wednesday, January 13, 2010 12:37 PM To: Susan Modlin Cc: framers at lists.frameusers.com; Will Husa Subject: Re: RoboHelp 6 So why not do the free 30-day eval of RH8 or TCS2 and be done with it? Or MIF2Go? Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Wed, Jan 13, 2010 at 1:32 PM, Susan Modlin wrote: > Hi Will, > > You're right. We don't have RH 7 or 8. We're not a RH shop and don't particularly want to become one. All we want to do is a quick update to a existing project before we sunset the whole shebang. > > The frustrating part is Adobe surely still has the software and they acknowledge that we have a right to it -- they just won't make it available to us. Interestingly enough, the Adobe sight has downloads for v7 and v5, but not v6, which is the one we need. Go figure. > > Thanks, all. Any other suggestions are welcome. > > ...Susan > > > > > > > From: Will Husa > To: Susan Modlin ; framers at lists.frameusers.com > Sent: Wed, January 13, 2010 6:37:07 AM > Subject: RE: RoboHelp 6 > > Hi Susan, > > Judging by the tone of your message, I can only assume that you do not have > RoboHelp 7 or RoboHelp 8 in your tool kit. If you had RH7 or RH8, you could > just import the RH6 project file. > > Hope this helps, > > Will > > > > ___ > > > You are currently subscribed to Framers as art.campbell at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as Will.husa at 4techwriter.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: RoboHelp 6
Art has a good suggestion. Download the Trial version of RH8. It's fully functional. I played with it last month when I was evaluating RH8 vs MadCap Flare 5. = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Art Campbell Sent: Wednesday, January 13, 2010 12:37 PM To: Susan Modlin Cc: framers@lists.frameusers.com; Will Husa Subject: Re: RoboHelp 6 So why not do the free 30-day eval of RH8 or TCS2 and be done with it? Or MIF2Go? Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Wed, Jan 13, 2010 at 1:32 PM, Susan Modlin wrote: > Hi Will, > > You're right. We don't have RH 7 or 8. We're not a RH shop and don't particularly want to become one. All we want to do is a quick update to a existing project before we sunset the whole shebang. > > The frustrating part is Adobe surely still has the software and they acknowledge that we have a right to it -- they just won't make it available to us. Interestingly enough, the Adobe sight has downloads for v7 and v5, but not v6, which is the one we need. Go figure. > > Thanks, all. Any other suggestions are welcome. > > ...Susan > > > > > > > From: Will Husa > To: Susan Modlin ; framers@lists.frameusers.com > Sent: Wed, January 13, 2010 6:37:07 AM > Subject: RE: RoboHelp 6 > > Hi Susan, > > Judging by the tone of your message, I can only assume that you do not have > RoboHelp 7 or RoboHelp 8 in your tool kit. If you had RH7 or RH8, you could > just import the RH6 project file. > > Hope this helps, > > Will > > > > ___ > > > You are currently subscribed to Framers as art.campb...@gmail.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ___ You are currently subscribed to Framers as will.h...@4techwriter.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: RoboHelp 6
Hi Susan, Judging by the tone of your message, I can only assume that you do not have RoboHelp 7 or RoboHelp 8 in your tool kit. If you had RH7 or RH8, you could just import the RH6 project file. Hope this helps, Will = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Susan Modlin Sent: Tuesday, January 12, 2010 7:06 PM To: framers@lists.frameusers.com Subject: OT: RoboHelp 6 Hi, Framers, I've tried all the obvious and usual suspects, but no one is coming through. Here's the problem: my company acquired another software firm and I inherited their docs, which were created in Word and RH6. Before we jettison the existing docs and move them to FM, I need to make some updates to the RH version. This required RH6. Unfortunately, the media was lost in the move. I have the serial number, but no software. Multiple phone calls and support cases opened with Adobe have yielded absolutely nothing. They even went so far as to give me a busted FTP URL and then deny that such a thing existed. Go figure. I realize that this group has absolutely nothing to do with RH, but you're the most innovative and creative problem solvers I know, so I'm throwing myself on your mercy. Anyone have any ideas? ...Susan "When you find a big kettle of crazy, it's best not to stir it." Scott Adams ___ You are currently subscribed to Framers as will.h...@4techwriter.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RoboHelp 6
Hi Susan, Judging by the tone of your message, I can only assume that you do not have RoboHelp 7 or RoboHelp 8 in your tool kit. If you had RH7 or RH8, you could just import the RH6 project file. Hope this helps, Will = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Susan Modlin Sent: Tuesday, January 12, 2010 7:06 PM To: framers at lists.frameusers.com Subject: OT: RoboHelp 6 Hi, Framers, I've tried all the obvious and usual suspects, but no one is coming through. Here's the problem: my company acquired another software firm and I inherited their docs, which were created in Word and RH6. Before we jettison the existing docs and move them to FM, I need to make some updates to the RH version. This required RH6. Unfortunately, the media was lost in the move. I have the serial number, but no software. Multiple phone calls and support cases opened with Adobe have yielded absolutely nothing. They even went so far as to give me a busted FTP URL and then deny that such a thing existed. Go figure. I realize that this group has absolutely nothing to do with RH, but you're the most innovative and creative problem solvers I know, so I'm throwing myself on your mercy. Anyone have any ideas? ...Susan "When you find a big kettle of crazy, it's best not to stir it." Scott Adams ___ You are currently subscribed to Framers as Will.husa at 4techwriter.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: OFF-TOPIC POST Digital Voice Recorders
I've been using the Olympus DS-40 Digital Voice Recorder for about 4 months now to interview SME's and record conference calls. It was the best investment that I ever made for this type of product. = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Flato, Gillian Sent: Wednesday, September 09, 2009 6:21 PM To: fram...@frameusers.com; framers@lists.frameusers.com Subject: OFF-TOPIC POST Digital Voice Recorders I am looking to purchase a USB Digital Voice Recorder for interviewing SME's. So I just need good voice quality for mono voice, long battery life, long recording time and ease of transfer to my computer. What have been your experiences with them? Any recommendations? TIA Thank you, Gillian Flato Technical Writer (Software) nanometrics 1550 Buckeye Dr. Milpitas, CA. 95035 *408.545.6316 7 408.232.5911 * gfl...@nanometrics.com <mailto:gfl...@nanometrics.com> ___ You are currently subscribed to Framers as will.h...@4techwriter.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
OFF-TOPIC POST Digital Voice Recorders
I've been using the Olympus DS-40 Digital Voice Recorder for about 4 months now to interview SME's and record conference calls. It was the best investment that I ever made for this type of product. = Will Husa Technical Writer Your source for user-friendly documentation Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Flato, Gillian Sent: Wednesday, September 09, 2009 6:21 PM To: framers at frameusers.com; framers at lists.frameusers.com Subject: OFF-TOPIC POST Digital Voice Recorders I am looking to purchase a USB Digital Voice Recorder for interviewing SME's. So I just need good voice quality for mono voice, long battery life, long recording time and ease of transfer to my computer. What have been your experiences with them? Any recommendations? TIA Thank you, Gillian Flato Technical Writer (Software) nanometrics 1550 Buckeye Dr. Milpitas, CA. 95035 *408.545.6316 7 408.232.5911 * gflato at nanometrics.com <mailto:gflato at nanometrics.com> ___ You are currently subscribed to Framers as Will.husa at 4techwriter.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/will.husa%404techwriter. com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RoboHelp 8 and Map ID's
Hi All, My friend, Caryn, is having some difficulties with RoboHelp 8 and deployment of Map ID's. (see below) If you can help her out, please cc her at drove...@aol.com. Thanks, Will = Will Husa Technical Writer Your source for user friendly documentation, user manuals, and HTML help. Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com _ From: drove...@aol.com [mailto:drove...@aol.com] Sent: Tuesday, June 02, 2009 3:30 PM To: will.h...@4techwriter.com Subject: my ropbohelp project issues Will, Good talking with you. I am using RoboHelp for HTML version 8. I am stuck with field content level help. I am using IDH prefixes before my topics for my field level help. For example, IDH_Service_Date mapped to map id 1. I am letting RoboHelp assign numbers. I also went it to map id's and made sure all my map topics are assigned to an it number. Robohelp forum said for me to make sure the following is done: 1. Project setup > windows seting >auto synchronize t.o.c check box 2. When i generate the file, (html output), in the screen HTML Help options > select Edit button> t.o.c styles tab > complete this form and make sure always show selection is selected. Please refer to my screen. The right side is correct and shows my field level description. The left side has the books collapsed and they should be expanding to the related topic. I can only map one id for each topic, correct? Can you help me? Thanks Caryn Drovie 630-709-3166 ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RoboHelp 8 and Map ID's
Hi All, My friend, Caryn, is having some difficulties with RoboHelp 8 and deployment of Map ID's. (see below) If you can help her out, please cc her at drovenes at aol.com. Thanks, Will = Will Husa Technical Writer Your source for user friendly documentation, user manuals, and HTML help. Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com _ From: drovenes at aol.com [mailto:drove...@aol.com] Sent: Tuesday, June 02, 2009 3:30 PM To: will.husa at 4techwriter.com Subject: my ropbohelp project issues Will, Good talking with you. I am using RoboHelp for HTML version 8. I am stuck with field content level help. I am using IDH prefixes before my topics for my field level help. For example, IDH_Service_Date mapped to map id 1. I am letting RoboHelp assign numbers. I also went it to map id's and made sure all my map topics are assigned to an it number. Robohelp forum said for me to make sure the following is done: 1. Project setup > windows seting >auto synchronize t.o.c check box 2. When i generate the file, (html output), in the screen HTML Help options > select Edit button> t.o.c styles tab > complete this form and make sure always show selection is selected. Please refer to my screen. The right side is correct and shows my field level description. The left side has the books collapsed and they should be expanding to the related topic. I can only map one id for each topic, correct? Can you help me? Thanks Caryn Drovie 630-709-3166
TriZetto inquiry
Hi All, I'm new to this list. Milan Davidovic recommended that I seek your advice. I'm researching a company called TriZetto and I was looking to see if anyone in this forum had any dealings with them. Thanks for your help, Will = Will Husa Technical Writer Your source for user friendly documentation, user manuals, and HTML help. Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
TriZetto inquiry
Hi All, I'm new to this list. Milan Davidovic recommended that I seek your advice. I'm researching a company called TriZetto and I was looking to see if anyone in this forum had any dealings with them. Thanks for your help, Will = Will Husa Technical Writer Your source for user friendly documentation, user manuals, and HTML help. Phone: 708-927-3569 Fax: 630-668-9283 www.4techwriter.com
