No rtf output generated from Mif2Go
FM 12 (new installation) Win 7 m2g 55 I posted this to the Mif2Go Yahoo Group a couple of days ago, but have not heard anything back. I'm hoping someone here can help me. I think I followed all the steps to install. Tore my hair out doing it. (I'd much rather just have an installer.) All I need is a simple conversion to RTF. I did the basics that I've done before. Here's what I get: Console shows this: Mif2Go could not write F:\path_removed\RTF-Test\Overview.mif Mif2Go created file: F:\path_removed\RTF-Test\Overview.rtf in: 0 min 00 seconds at: Sun Sep 28 16:20:01 2014 There is no rtf file in my output folder, despite what the message says. Log has no errors: Sun Sep 28 16:19:57 2014 I1: Starting log for m2rbook, b114 and f009, project Overview I1: Opened file F:\path_removed\Overview.fm I1: File ID is aa Sun Sep 28 16:20:00 2014 I1: Starting log for drmif, m210 I1: Automation processing completed by drmif. Sun Sep 28 16:20:01 2014 I1: Starting log for dwrtf, r299 I1: Automation processing completed by dwrtf. Sun Sep 28 16:20:03 2014 I1: Project finished I1: Closing log for m2rbook When I try to Wash Via Mif for a single file, the console shows this: Mif2Go could not write F:\path_removed\Overview.tmb F: is a partition on my hard drive with plenty of space on it. I tried again on a mostly blank, new file, and I can't even get the .ini file to be created when I configure a new project in a new folder. Any ideas? ~ Linda G. Gallagher STC Fellow TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com http://www.techcomplus.com/ 303-450-9076 or 800-500-3144 Tutorials, show me demos, user guides, help, FrameMaker and WebWorks ePublisher templates ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: No rtf output generated from Mif2Go
Did you grab the right version of MIF2Go for FM12? I seem to recall talk about a different version required for FM12. From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of LGLists Sent: October-01-14 11:24 AM To: 'Post Framers' Subject: No rtf output generated from Mif2Go FM 12 (new installation) Win 7 m2g 55 I posted this to the Mif2Go Yahoo Group a couple of days ago, but have not heard anything back. I'm hoping someone here can help me. I think I followed all the steps to install. Tore my hair out doing it. (I'd much rather just have an installer.) All I need is a simple conversion to RTF. I did the basics that I've done before. Here's what I get: Console shows this: Mif2Go could not write F:\path_removed\RTF-Test\Overview.mif Mif2Go created file: F:\path_removed\RTF-Test\Overview.rtf in: 0 min 00 seconds at: Sun Sep 28 16:20:01 2014 There is no rtf file in my output folder, despite what the message says. Log has no errors: Sun Sep 28 16:19:57 2014 I1: Starting log for m2rbook, b114 and f009, project Overview I1: Opened file F:\path_removed\Overview.fm I1: File ID is aa Sun Sep 28 16:20:00 2014 I1: Starting log for drmif, m210 I1: Automation processing completed by drmif. Sun Sep 28 16:20:01 2014 I1: Starting log for dwrtf, r299 I1: Automation processing completed by dwrtf. Sun Sep 28 16:20:03 2014 I1: Project finished I1: Closing log for m2rbook When I try to Wash Via Mif for a single file, the console shows this: Mif2Go could not write F:\path_removed\Overview.tmb F: is a partition on my hard drive with plenty of space on it. I tried again on a mostly blank, new file, and I can't even get the .ini file to be created when I configure a new project in a new folder. Any ideas? ~ Linda G. Gallagher STC Fellow TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.comhttp://www.techcomplus.com/ 303-450-9076 or 800-500-3144 Tutorials, show me demos, user guides, help, FrameMaker and WebWorks ePublisher templates ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: No rtf output generated from Mif2Go
The latest version of Mif2Go on the web site works for me for FrameMaker 12 ... I had to make a few minor changes to a few files (I also only use it to generate RTF) for my situation. Here are the gory details - maybe they will help, but I would be surprised, since my changes were pretty simple really. First, here are my differences in %omsyshome%\common\local\config\local_omsys.ini (comparing my version to the distributed file): 1:94 HelpCopyright=Aeris Communications, Inc. 2:94 HelpCopyright=Omni Systems 1:98 ViewOutputCommand=C:\Program Files (x86)\Microsoft Office\Office15\WINWORD.EXE /mLoadD2gRtfFile 2:98 ViewOutputCommand=C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE /mLoadD2gRtfFile The Copyright line is obvious - it has my company name rather than Omni Systems. The other difference is not as obvious ... changes the directory from Office14 to Office15 for the Word executable on my system. Second, I changed the default location for Mif2Go stuff in my documents. Here are the additional lines in %omsyshome%\m2g\local\config\local_m2g_config.ini: 1: 8 [Setup] 1: 9 LocalConfigPath=.\_config\ 1:10 1:11 [Automation] 1:12 ShipPath=.\_ship 1:13 1:14 [End] Basically, I prefer my Mif2Go related files to be one subdirectory below where I edit my FM documents ... not in parallel (as is the default, as I recall), since I keep versions of FM documents there. The two additional entries above provide that. Z From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Jeff Coatsworth Sent: Wednesday, October 01, 2014 8:36 AM To: 'Post Framers' Subject: RE: No rtf output generated from Mif2Go Did you grab the right version of MIF2Go for FM12? I seem to recall talk about a different version required for FM12. From: framers-boun...@lists.frameusers.commailto:framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of LGLists Sent: October-01-14 11:24 AM To: 'Post Framers' Subject: No rtf output generated from Mif2Go FM 12 (new installation) Win 7 m2g 55 I posted this to the Mif2Go Yahoo Group a couple of days ago, but have not heard anything back. I'm hoping someone here can help me. I think I followed all the steps to install. Tore my hair out doing it. (I'd much rather just have an installer.) All I need is a simple conversion to RTF. I did the basics that I've done before. Here's what I get: Console shows this: Mif2Go could not write F:\path_removed\RTF-Test\Overview.mif Mif2Go created file: F:\path_removed\RTF-Test\Overview.rtf in: 0 min 00 seconds at: Sun Sep 28 16:20:01 2014 There is no rtf file in my output folder, despite what the message says. Log has no errors: Sun Sep 28 16:19:57 2014 I1: Starting log for m2rbook, b114 and f009, project Overview I1: Opened file F:\path_removed\Overview.fm I1: File ID is aa Sun Sep 28 16:20:00 2014 I1: Starting log for drmif, m210 I1: Automation processing completed by drmif. Sun Sep 28 16:20:01 2014 I1: Starting log for dwrtf, r299 I1: Automation processing completed by dwrtf. Sun Sep 28 16:20:03 2014 I1: Project finished I1: Closing log for m2rbook When I try to Wash Via Mif for a single file, the console shows this: Mif2Go could not write F:\path_removed\Overview.tmb F: is a partition on my hard drive with plenty of space on it. I tried again on a mostly blank, new file, and I can't even get the .ini file to be created when I configure a new project in a new folder. Any ideas? ~ Linda G. Gallagher STC Fellow TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.comhttp://www.techcomplus.com/ 303-450-9076 or 800-500-3144 Tutorials, show me demos, user guides, help, FrameMaker and WebWorks ePublisher templates ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: No rtf output generated from Mif2Go
FM12's own Save as... Microsoft RTF is much, much better than it used to be. Try that and see if you can bypass Mif2Go completely for RTF output. On Wed, Oct 1, 2014 at 2:04 PM, Syed Zaeem Hosain (syed.hos...@aeris.net) syed.hos...@aeris.net wrote: The latest version of Mif2Go on the web site works for me for FrameMaker 12 … I had to make a few minor changes to a few files (I also only use it to generate RTF) for my situation. Here are the gory details – maybe they will help, but I would be surprised, since my changes were pretty simple really. First, here are my differences in %omsyshome%\common\local\config\local_omsys.ini (comparing my version to the distributed file): 1:94 HelpCopyright=Aeris Communications, Inc. 2:94 HelpCopyright=Omni Systems 1:98 ViewOutputCommand=C:\Program Files (x86)\Microsoft Office\Office15\WINWORD.EXE /mLoadD2gRtfFile 2:98 ViewOutputCommand=C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE /mLoadD2gRtfFile The Copyright line is obvious - it has my company name rather than Omni Systems. The other difference is not as obvious ... changes the directory from Office1*4* to Office1*5* for the Word executable on my system. Second, I changed the default location for Mif2Go stuff in my documents. Here are the additional lines in %omsyshome%\m2g\local\config\local_m2g_config.ini: 1: 8 [Setup] 1: 9 LocalConfigPath=.\_config\ 1:10 1:11 [Automation] 1:12 ShipPath=.\_ship 1:13 1:14 [End] Basically, I prefer my Mif2Go related files to be one subdirectory below where I edit my FM documents ... not in parallel (as is the default, as I recall), since I keep versions of FM documents there. The two additional entries above provide that. Z *From:* framers-boun...@lists.frameusers.com [mailto: framers-boun...@lists.frameusers.com] *On Behalf Of *Jeff Coatsworth *Sent:* Wednesday, October 01, 2014 8:36 AM *To:* 'Post Framers' *Subject:* RE: No rtf output generated from Mif2Go Did you grab the right version of MIF2Go for FM12? I seem to recall talk about a different version required for FM12. *From:* framers-boun...@lists.frameusers.com [ mailto:framers-boun...@lists.frameusers.com framers-boun...@lists.frameusers.com] *On Behalf Of *LGLists *Sent:* October-01-14 11:24 AM *To:* 'Post Framers' *Subject:* No rtf output generated from Mif2Go FM 12 (new installation) Win 7 m2g 55 I posted this to the Mif2Go Yahoo Group a couple of days ago, but have not heard anything back. I'm hoping someone here can help me. I think I followed all the steps to install. Tore my hair out doing it. (I'd much rather just have an installer.) All I need is a simple conversion to RTF. I did the basics that I've done before. Here's what I get: Console shows this: Mif2Go could not write F:\path_removed\RTF-Test\Overview.mif Mif2Go created file: F:\path_removed\RTF-Test\Overview.rtf in: 0 min 00 seconds at: Sun Sep 28 16:20:01 2014 There is no rtf file in my output folder, despite what the message says. Log has no errors: Sun Sep 28 16:19:57 2014 I1: Starting log for m2rbook, b114 and f009, project Overview I1: Opened file F:\path_removed\Overview.fm I1: File ID is aa Sun Sep 28 16:20:00 2014 I1: Starting log for drmif, m210 I1: Automation processing completed by drmif. Sun Sep 28 16:20:01 2014 I1: Starting log for dwrtf, r299 I1: Automation processing completed by dwrtf. Sun Sep 28 16:20:03 2014 I1: Project finished I1: Closing log for m2rbook When I try to Wash Via Mif for a single file, the console shows this: Mif2Go could not write F:\path_removed\Overview.tmb F: is a partition on my hard drive with plenty of space on it. I tried again on a mostly blank, new file, and I can't even get the .ini file to be created when I configure a new project in a new folder. Any ideas? ~ Linda G. Gallagher STC Fellow TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com 303-450-9076 or 800-500-3144 Tutorials, show me demos, user guides, help, FrameMaker and WebWorks ePublisher templates ___ You are currently subscribed to framers as john.sgamm...@actifio.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/john.sgammato%40actifio.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. -- http://www.actifio.com/*John Sgammato, Documentation Architect* *e* john.sgamm...@actifio.com *c* 508.927.2083 *t* @actifiodocs http://twitter.com/actifiodocs 333 Wyman Street, Waltham, MA 02451 http://twitter.com/actifiohttp://www.linkedin.com/company/399246 https