Re: [Frameworks] Moviola question(s)
Hi Scott and Alain, thanks for responding. Well, before I started digging into it, it was just as you described, Scott. I was able to lock the first mag with the Master pix knob, but with no response from the Pix motor. I started digging underneath and found two broken fuse holders, one for Pix and one for the second mag. I guess they got broken in transit. It's been really hard to try to replace these, so I've been trying to splice in a new fuse holder. At first, this seemed to work for the second mag, and I got it running, but now the first mag doesn't seem to work. Fuses are still good. I hooked up the Pix and it was very erratic, super loud rhythmic banging, and then would start running at full speed in the off position. I'm hoping that reseating the cards like you mentioned is what it needs. I'm not really sure how to get the metal bracket out in order to properly replace the fuse holders...It's really tricky. Mike Morris Dallas, TX Message: 11 Date: Mon, 07 Jan 2013 20:19:15 -0500 From: Scott Dorsey klu...@panix.com Subject: Re: [Frameworks] Moviola question(s) To: frameworks@jonasmekasfilms.com Message-ID: 50eb7413.rm53dhn3nirshcc6%klu...@panix.com Content-Type: text/plain; charset=us-ascii I would first check the pot labelled master and then start working my way down the chain. If you put the first mag sound deck in so that it locks ot the master pix deck, and then you turn the master knob, does the mag sound deck turn? If so, the control signal is making it out and it's the drive electronics. I'd reseat all the cards underneath too. --scott -- Message: 10 Date: Mon, 7 Jan 2013 15:02:15 -0800 From: 40 Frames i...@40frames.org Subject: Re: [Frameworks] Moviola question(s) To: Mike Morris m_alex_mor...@yahoo.com, Experimental Film Discussion List frameworks@jonasmekasfilms.com Message-ID: CAAUwOmO1G=ugkzh8wbjzdgcucfheel7ozeths-bddzz8pyp...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Mike, What model Moviola is it? M77 or M86? Alain On Mon, Jan 7, 2013 at 2:19 PM, Mike Morris m_alex_mor...@yahoo.com wrote: Hi all, I recently acquired what seems to be a very nice 6 plate flatbed Moviola (that may prove to be a contradiction in terms, we'll see). I haven't played with it much yet. I've been warned that it's a notorious film snapper, but I haven't experienced that yet. I wonder if anyone knows how to track down a manual on one of these? I've worked quite a bit with Steenbecks in the past and I'm realizing just how different they function. The main problem I've run into so far, and this may be user error rather than something that needs to be repaired (i hope), but after I've turned on the switches for the two pix plates for the picture, and they put tension on the film, I turn the variable knob labeled Master, which I assume is suposed to transport the film, but nothing happens. The two mag sound knobs seem to work just fine. I'm figuring I just don't have something adjusted right since the table was in use as of 2 years ago, from what the fellow told me. Anyway, any help is appreciated. Mike Morris Dallas, TX ___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks ___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks
[Frameworks] Moviola question(s)
Hi all, I recently acquired what seems to be a very nice 6 plate flatbed Moviola (that may prove to be a contradiction in terms, we'll see). I haven't played with it much yet. I've been warned that it's a notorious film snapper, but I haven't experienced that yet. I wonder if anyone knows how to track down a manual on one of these? I've worked quite a bit with Steenbecks in the past and I'm realizing just how different they function. The main problem I've run into so far, and this may be user error rather than something that needs to be repaired (i hope), but after I've turned on the switches for the two pix plates for the picture, and they put tension on the film, I turn the variable knob labeled Master, which I assume is suposed to transport the film, but nothing happens. The two mag sound knobs seem to work just fine. I'm figuring I just don't have something adjusted right since the table was in use as of 2 years ago, from what the fellow told me. Anyway, any help is appreciated. Mike Morris Dallas, TX___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks
Re: [Frameworks] Moviola question(s)
Mike, What model Moviola is it? M77 or M86? Alain On Mon, Jan 7, 2013 at 2:19 PM, Mike Morris m_alex_mor...@yahoo.com wrote: Hi all, I recently acquired what seems to be a very nice 6 plate flatbed Moviola (that may prove to be a contradiction in terms, we'll see). I haven't played with it much yet. I've been warned that it's a notorious film snapper, but I haven't experienced that yet. I wonder if anyone knows how to track down a manual on one of these? I've worked quite a bit with Steenbecks in the past and I'm realizing just how different they function. The main problem I've run into so far, and this may be user error rather than something that needs to be repaired (i hope), but after I've turned on the switches for the two pix plates for the picture, and they put tension on the film, I turn the variable knob labeled Master, which I assume is suposed to transport the film, but nothing happens. The two mag sound knobs seem to work just fine. I'm figuring I just don't have something adjusted right since the table was in use as of 2 years ago, from what the fellow told me. Anyway, any help is appreciated. Mike Morris Dallas, TX ___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks -- 40 FRAMES Alain LeTourneau Pam Minty 40 FRAMES 5232 North Williams Avenue Portland, Oregon 97217 USA +1 503 231 6548 www.40frames.org www.16mmdirectory.org www.emptyquarterfilm.org ___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks
Re: [Frameworks] Moviola question(s)
I would first check the pot labelled master and then start working my way down the chain. If you put the first mag sound deck in so that it locks ot the master pix deck, and then you turn the master knob, does the mag sound deck turn? If so, the control signal is making it out and it's the drive electronics. I'd reseat all the cards underneath too. --scott ___ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks
