Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
The kernel of the standard, GENERIC Similar problems after attempting to install from the disk FreeBSD-9.0-CURRENT-201011-amd64-dvd1.iso In the latter case, there were cases of complete system lockup. The upgrade process: cd /usr/src make clean rm -r /usr/obj make buildworld make buildkernel KERNCONF=GENERIC make installkernel KERNCONF=GENERIC make installworld What am I doing wrong? -- Vladislav V. Prodan VVP24-UANIC +38[067]4584408 +38[099]4060508 vla...@jabber.ru FreeBSD 9.0-CURRENT #0: Wed Dec 15 11:48:40 EET 2010 r...@beastie:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: AMD Phenom(tm) II X6 1090T Processor (3214.25-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100fa0 Family = 10 Model = a Stepping = 0 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x37ff TSC: P-state invariant real memory = 17179869184 (16384 MB) avail memory = 16398311424 (15638 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 ioapic0: Changing APIC ID to 8 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a (3) failed acpi0: reservation of 10, d7bf (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 cpu4: on acpi0 cpu5: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xde00-0xdeff mem 0xd800-0xdfff,0xfdbe-0xfdbe,0xfda0-0xfdaf irq 18 at device 5.0 on pci1 pci1: at device 5.1 (no driver attached) pcib2: irq 17 at device 9.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: irq 18 at device 10.0 on pci0 pci3: on pcib3 re0: port 0xee00-0xeeff mem 0xfdeff000-0xfdef,0xfdef8000-0xfdefbfff irq 18 at device 0.0 on pci3 re0: Using 1 MSI messages re0: Chip rev. 0x2800 re0: MAC rev. 0x miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 1c:6f:65:43:fa:9a atapci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 19 at device 17.0 on pci0 atapci0: AHCI v1.20 controller with 6 6Gbps ports, PM supported ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 ata5: on atapci0 ata6: on atapci0 ata7: on atapci0 ohci0: mem 0xfe02e000-0xfe02efff irq 18 at device 18.0 on pci0 usbus0: on ohci0 ehci0: mem 0xfe02d000-0xfe02d0ff irq 17 at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1: on ehci0 ohci1: mem 0xfe02c000-0xfe02cfff irq 18 at device 19.0 on pci0 usbus2: on ohci1 ehci1: mem 0xfe02b000-0xfe02b0ff irq 17 at device 19.2 on pci0 usbus3: EHCI version 1.0 usbus3: on ehci1 pci0: at device 20.0 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pci4: on pcib4 fwohci0: mem 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 22 at device 14.0 on pci4 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:17:ee:00:1c:6f:65 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:17:1c:6f:65 fwe0: Ethernet address: 02:11:17:1c:6f:65 fwip0: on firewire0 fwip0: Firewire address: 00:11:17:ee:00:1c:6f:65 @ 0xfffe, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x12ec000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x, SelfID Count=1, CYCLEMASTER mode ohci2: mem 0xfe02a000-0xfe02afff irq 18 at device 20.5 on pci0 usbus4: on ohci2 pcib5: at device 21.0 on pci0 pci5: on pcib5 atapci1: port 0xaf00-0xaf07,0xae00-0xae03,0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfd9fe000-0xfd9f irq 17 at device 0.0 on pci5 atapci2: on atapci1 atapci2: AHCI v1.00 controller with 2 3Gbps ports, PM supported ata8: on atapci2 ata9: on atapci2 ata10: on atapci1 pcib6: at device 21.1 on pci0 pci6: on pcib6 ohci3: mem 0xfe029000-0xfe029fff irq 18 at device 22.0 on pci0 usbus5: on ohci3 ehci2: mem 0xfe028000-0xfe0280ff irq 17 at device 22.2 on pci0 usbus6: EHCI version 1.0 usbus6: on ehci2 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 attimer0: port 0x40-0x43 irq 0 o
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
on 15/12/2010 14:18 Vladislav V. Prodan said the following: > The kernel of the standard, GENERIC > Similar problems after attempting to install from the disk > FreeBSD-9.0-CURRENT-201011-amd64-dvd1.iso > In the latter case, there were cases of complete system lockup. > > The upgrade process: > cd /usr/src > make clean > rm -r /usr/obj > make buildworld > make buildkernel KERNCONF=GENERIC > make installkernel KERNCONF=GENERIC > make installworld > > > What am I doing wrong? > Just a guess - have you looked at UPDATING in CURRENT sources? But the lock up is totally unexpected, try to debug it. -- Andriy Gapon ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
15.12.2010 15:00, Andriy Gapon wrote: > Just a guess - have you looked at UPDATING in CURRENT sources? > But the lock up is totally unexpected, try to debug it. > Nothing interesting find, but flew into a panic: panic: bio_completed can't be greater than bio_lenght cpuid =3 ... Now try to attach a screenshot. -- Vladislav V. Prodan VVP24-UANIC +38[067]4584408 +38[099]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
15.12.2010 15:11, Vladislav V. Prodan wrote: > Now try to attach a screenshot. > > http://img576.imageshack.us/i/dsc00563u.jpg/ -- Vladislav V. Prodan VVP24-UANIC +38[067]4584408 +38[099]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
2010/12/15 Vladislav V. Prodan : > 15.12.2010 15:11, Vladislav V. Prodan wrote: > >> Now try to attach a screenshot. >> >> > > http://img576.imageshack.us/i/dsc00563u.jpg/ ad6: TIMEOUT - READ_DMA retrying (1 retry left) LBA=8638372 Maybe installkernel/installworld copied files on bad clusters, they were previously bad but you notice only now that there are system files on them... -- Olivier Smedts _ ASCII ribbon campaign ( ) e-mail: oliv...@gid0.org - against HTML email & vCards X www: http://www.gid0.org - against proprietary attachments / \ "Il y a seulement 10 sortes de gens dans le monde : ceux qui comprennent le binaire, et ceux qui ne le comprennent pas." ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
on 15/12/2010 16:25 Olivier Smedts said the following: > 2010/12/15 Vladislav V. Prodan : >> 15.12.2010 15:11, Vladislav V. Prodan wrote: >> >>> Now try to attach a screenshot. >>> >>> >> >> http://img576.imageshack.us/i/dsc00563u.jpg/ > > ad6: TIMEOUT - READ_DMA retrying (1 retry left) LBA=8638372 > > Maybe installkernel/installworld copied files on bad clusters, they > were previously bad but you notice only now that there are system > files on them... This indeed looks like a problem caused by disk. There shouldn't have been the panic though ("bio_completed can't be greater than bio_length"). It's a possible geom or ad driver problem. What is your geom topology on this system? Changing cc: from fs@ to g...@. -- Andriy Gapon ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
On 15.12.2010 16:16, Andriy Gapon wrote: > on 15/12/2010 16:25 Olivier Smedts said the following: >> 2010/12/15 Vladislav V. Prodan : >>> 15.12.2010 15:11, Vladislav V. Prodan wrote: >>> Now try to attach a screenshot. >>> >>> http://img576.imageshack.us/i/dsc00563u.jpg/ >> >> ad6: TIMEOUT - READ_DMA retrying (1 retry left) LBA=8638372 >> >> Maybe installkernel/installworld copied files on bad clusters, they >> were previously bad but you notice only now that there are system >> files on them... > > This indeed looks like a problem caused by disk. > There shouldn't have been the panic though ("bio_completed can't be greater > than > bio_length"). > It's a possible geom or ad driver problem. > What is your geom topology on this system? > > Changing cc: from fs@ to g...@. Agreed, looks like hardware or driver issue, but AFAIK 8 and HEAD have pretty much the same ATA drivers, MFC-ed often. Maybe it's something trivial - nudged cables or a power supply gone accidentally bad. Just for a test, can you try running with AHCI here? (ahci_load=YES in loader.conf; note that it will rename devices; don't know if ZFS root can handle it). ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Next ZFSv28 patchset ready for testing.
Pawel Jakub Dawidek writes: > Hi. > > The new patchset is ready for testing: > > http://people.freebsd.org/~pjd/patches/zfs_20101212.patch.bz2 > > When applying the patch be sure to use correct options for patch(1)!: > > # cd /usr/src > # fetch http://people.freebsd.org/~pjd/patches/zfs_20101212.patch.bz2 > # bzip2 -d zfs_20101212.patch.bz2 > # patch -E -p0 < zfs_20101212.patch $ zfs allow Traceback (most recent call last): File "/usr/lib/zfs/pyzfs.py", line 35, in import zfs.util File "/usr/local/lib/python2.7/site-packages/zfs/util.py", line 31, in import solaris.misc ImportError: No module named solaris.misc Exit 1 Am I missing smth? Looks like lib/pysolaris wasn't ported from onnv-gate. ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Low speed disk subsystem after the upgrade 8.1-STABLE-201011 --> 9-CURRENT
15.12.2010 21:16, Jeremy Chadwick wrote: > Agreed. > > Vladislav, if you can get the system usable/bootable, please install > ports/sysutils/smartmontools and provide output from "smartctl -a > /dev/ad6" here. It should act as an indicator as to whether or not > there are bad blocks or odd disk behaviour. That there are no errors. In 8-STABLE smarmontools showed no errors. -- Vladislav V. Prodan VVP24-UANIC +38[067]4584408 +38[099]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Next ZFSv28 patchset ready for testing.
Anonymous writes: > $ zfs allow > Traceback (most recent call last): > File "/usr/lib/zfs/pyzfs.py", line 35, in > import zfs.util > File "/usr/local/lib/python2.7/site-packages/zfs/util.py", line 31, in > > import solaris.misc > ImportError: No module named solaris.misc > Exit 1 > > Am I missing smth? Looks like lib/pysolaris wasn't ported from onnv-gate. Doh, it's likely my install is broken, I think it worked before with previous ZFSv28 patch. ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: USB 1.1 devs not working on ASUS K8VSE (x86) MB
according to kldstat -v, both "uhci/usbus" & "pci/uhci" were present in my kernel but one or both of them was silently failing. apparently something in my sources was corrupt because deleting all of the USB related code from my CVS root, re-csuping it, and building a fresh kernel solved the problem. thanks for the help. tom ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
RE: Next ZFSv28 patchset ready for testing.
I've installed and complied it on 9-Current 2010.12.12, looks to be running fine. I've imported a v15 6 disk raidz that was created under 8.1-Stable, and so far it's passing all tests. I'll be doing some serious Send/Receive testing in the next few days, so I'll see if I can break it. I'll also be upgrading the v15 fs to v28 and testing it further, as well as creating a fresh v28 pool, so I'll let you know how it goes. -Original Message- From: owner-freebsd-curr...@freebsd.org [mailto:owner-freebsd-curr...@freebsd.org] On Behalf Of Pawel Jakub Dawidek Sent: December-14-10 11:44 AM To: Olivier Smedts Cc: freebsd...@freebsd.org; freebsd-current@freebsd.org; Steven Hartland; m...@freebsd.org Subject: Re: Next ZFSv28 patchset ready for testing. On Tue, Dec 14, 2010 at 03:20:05PM +0100, Olivier Smedts wrote: > > make installworld > > That's what I wanted to do, and why I rebooted single-user on the new > kernel. But isn't the v13-v15 userland supposed to work with the v28 > kernel ? Yes, it is suppose to work. Exactly to be able to follow FreeBSD common upgrade path. Martin was working on this (CCed). -- Pawel Jakub Dawidek http://www.wheelsystems.com p...@freebsd.org http://www.FreeBSD.org FreeBSD committer Am I Evil? Yes, I Am! ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: [PANIC] ffs_alloccg: map corrupted
On Thu, Dec 02, 2010 at 03:31:41PM -0800, Garrett Cooper wrote: > On Thu, Dec 2, 2010 at 2:43 PM, David O'Brien wrote: > > Thoughts? > > > > FreeBSD 9.0-CURRENT #654 r215604M: Sat Nov 20 19:51:27 PST 2010 > > ? ?ro...@dragon:/sys/i386/compile/DRAGON i386 > > [..] > > start = 0, len = 3359, fs = /files > > panic: ffs_alloccg: map corrupted [..] > > ffs_balloc_ufs2(ce55e660,38000,0,4000,ce77b300,...) at 0xc0755629 = > > ffs_balloc_ufs2+0x1949 [..] > > panic: bufwrite: buffer is not busy??? > > UFS? UFS2? SU? SU+J? Got more details :)? UFS2, SU+J, ahd(4) HBA -- -- David (obr...@freebsd.org) ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Next ZFSv28 patchset ready for testing.
On Mon, Dec 13, 2010 at 10:45:56PM +0100, Pawel Jakub Dawidek wrote: > Hi. > > The new patchset is ready for testing: Running fine for 24 hours now under load with a ~50 disk v15 (not upgraded) pool from -CURRENT. Thanks! Only strange thing is the rc script complains: /etc/rc: DEBUG: run_rc_command: doit: zvol_start unrecognized command 'volinit' usage: zfs command args ... ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
[head tinderbox] failure on arm/arm
TB --- 2010-12-16 03:30:01 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2010-12-16 03:30:01 - starting HEAD tinderbox run for arm/arm TB --- 2010-12-16 03:30:01 - cleaning the object tree TB --- 2010-12-16 03:30:11 - cvsupping the source tree TB --- 2010-12-16 03:30:11 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2010-12-16 03:30:28 - building world TB --- 2010-12-16 03:30:28 - MAKEOBJDIRPREFIX=/obj TB --- 2010-12-16 03:30:28 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2010-12-16 03:30:28 - TARGET=arm TB --- 2010-12-16 03:30:28 - TARGET_ARCH=arm TB --- 2010-12-16 03:30:28 - TZ=UTC TB --- 2010-12-16 03:30:28 - __MAKE_CONF=/dev/null TB --- 2010-12-16 03:30:28 - cd /src TB --- 2010-12-16 03:30:28 - /usr/bin/make -B buildworld >>> World build started on Thu Dec 16 03:30:28 UTC 2010 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:898: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:911: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:912: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:915: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA512_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:919: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA384_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:994: warning: cast increases required alignment of target type *** Error code 1 Stop in /src/sbin/geom/class/eli. *** Error code 1 Stop in /src/sbin/geom/class. *** Error code 1 Stop in /src/sbin/geom. *** Error code 1 Stop in /src/sbin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2010-12-16 04:13:35 - WARNING: /usr/bin/make returned exit code 1 TB --- 2010-12-16 04:13:35 - ERROR: failed to build world TB --- 2010-12-16 04:13:35 - 1941.22 user 502.52 system 2614.83 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: [PANIC] ffs_alloccg: map corrupted
I've see many times that SUJ doesnt really make fs clean, then some problem in fs leads to panics. And sometimes I boot into single user mode after crash (caused by other things, eg. page fault), then fsck_ffs -y ; use SUJ and marked clean, and again: fsck_ffs -fy ; should not fix anything more, but actually it does report fixing something On Thu, Dec 16, 2010 at 11:29 AM, David O'Brien wrote: > On Thu, Dec 02, 2010 at 03:31:41PM -0800, Garrett Cooper wrote: >> On Thu, Dec 2, 2010 at 2:43 PM, David O'Brien wrote: >> > Thoughts? >> > >> > FreeBSD 9.0-CURRENT #654 r215604M: Sat Nov 20 19:51:27 PST 2010 >> > ro...@dragon:/sys/i386/compile/DRAGON i386 >> > [..] >> > start = 0, len = 3359, fs = /files >> > panic: ffs_alloccg: map corrupted > [..] >> > ffs_balloc_ufs2(ce55e660,38000,0,4000,ce77b300,...) at 0xc0755629 = >> > ffs_balloc_ufs2+0x1949 > [..] >> > panic: bufwrite: buffer is not busy??? >> >> UFS? UFS2? SU? SU+J? Got more details :)? > > UFS2, SU+J, ahd(4) HBA > > -- > -- David (obr...@freebsd.org) > ___ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" > ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: [PANIC] ffs_alloccg: map corrupted
On Wed, Dec 15, 2010 at 7:29 PM, David O'Brien wrote: > On Thu, Dec 02, 2010 at 03:31:41PM -0800, Garrett Cooper wrote: >> On Thu, Dec 2, 2010 at 2:43 PM, David O'Brien wrote: >> > Thoughts? >> > >> > FreeBSD 9.0-CURRENT #654 r215604M: Sat Nov 20 19:51:27 PST 2010 >> > ro...@dragon:/sys/i386/compile/DRAGON i386 >> > [..] >> > start = 0, len = 3359, fs = /files >> > panic: ffs_alloccg: map corrupted > [..] >> > ffs_balloc_ufs2(ce55e660,38000,0,4000,ce77b300,...) at 0xc0755629 = >> > ffs_balloc_ufs2+0x1949 > [..] >> > panic: bufwrite: buffer is not busy??? >> >> UFS? UFS2? SU? SU+J? Got more details :)? > > UFS2, SU+J, ahd(4) HBA Hmmm.. interesting. Was a cylinder block corrupted by an fsck and the map not updated (properly) to reflect the change? I haven't seen this particular issue before, but then again I stick to mfi(4) controllers for RAIDs and standalone ahci(4) drives. Thanks, -Garrett ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
[head tinderbox] failure on ia64/ia64
TB --- 2010-12-16 04:13:36 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2010-12-16 04:13:36 - starting HEAD tinderbox run for ia64/ia64 TB --- 2010-12-16 04:13:36 - cleaning the object tree TB --- 2010-12-16 04:13:49 - cvsupping the source tree TB --- 2010-12-16 04:13:49 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/ia64/ia64/supfile TB --- 2010-12-16 04:14:00 - building world TB --- 2010-12-16 04:14:00 - MAKEOBJDIRPREFIX=/obj TB --- 2010-12-16 04:14:00 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2010-12-16 04:14:00 - TARGET=ia64 TB --- 2010-12-16 04:14:00 - TARGET_ARCH=ia64 TB --- 2010-12-16 04:14:00 - TZ=UTC TB --- 2010-12-16 04:14:00 - __MAKE_CONF=/dev/null TB --- 2010-12-16 04:14:00 - cd /src TB --- 2010-12-16 04:14:00 - /usr/bin/make -B buildworld >>> World build started on Thu Dec 16 04:14:01 UTC 2010 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:898: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:911: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:912: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:915: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA512_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:919: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA384_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:994: warning: cast increases required alignment of target type *** Error code 1 Stop in /src/sbin/geom/class/eli. *** Error code 1 Stop in /src/sbin/geom/class. *** Error code 1 Stop in /src/sbin/geom. *** Error code 1 Stop in /src/sbin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2010-12-16 05:16:29 - WARNING: /usr/bin/make returned exit code 1 TB --- 2010-12-16 05:16:29 - ERROR: failed to build world TB --- 2010-12-16 05:16:29 - 2980.59 user 504.73 system 3772.95 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-ia64-ia64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
[head tinderbox] failure on mips/mips
TB --- 2010-12-16 05:16:30 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2010-12-16 05:16:30 - starting HEAD tinderbox run for mips/mips TB --- 2010-12-16 05:16:30 - cleaning the object tree TB --- 2010-12-16 05:16:37 - cvsupping the source tree TB --- 2010-12-16 05:16:37 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/mips/mips/supfile TB --- 2010-12-16 05:16:55 - building world TB --- 2010-12-16 05:16:55 - MAKEOBJDIRPREFIX=/obj TB --- 2010-12-16 05:16:55 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2010-12-16 05:16:55 - TARGET=mips TB --- 2010-12-16 05:16:55 - TARGET_ARCH=mips TB --- 2010-12-16 05:16:55 - TZ=UTC TB --- 2010-12-16 05:16:55 - __MAKE_CONF=/dev/null TB --- 2010-12-16 05:16:55 - cd /src TB --- 2010-12-16 05:16:55 - /usr/bin/make -B buildworld >>> World build started on Thu Dec 16 05:16:55 UTC 2010 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:898: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:911: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:912: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:915: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA512_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:919: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA384_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:994: warning: cast increases required alignment of target type *** Error code 1 Stop in /src/sbin/geom/class/eli. *** Error code 1 Stop in /src/sbin/geom/class. *** Error code 1 Stop in /src/sbin/geom. *** Error code 1 Stop in /src/sbin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2010-12-16 06:02:55 - WARNING: /usr/bin/make returned exit code 1 TB --- 2010-12-16 06:02:55 - ERROR: failed to build world TB --- 2010-12-16 06:02:55 - 2022.61 user 473.07 system 2784.76 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-mips-mips.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
[head tinderbox] failure on sparc64/sparc64
TB --- 2010-12-16 06:06:51 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2010-12-16 06:06:51 - starting HEAD tinderbox run for sparc64/sparc64 TB --- 2010-12-16 06:06:51 - cleaning the object tree TB --- 2010-12-16 06:07:01 - cvsupping the source tree TB --- 2010-12-16 06:07:01 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/sparc64/sparc64/supfile TB --- 2010-12-16 06:07:14 - building world TB --- 2010-12-16 06:07:14 - MAKEOBJDIRPREFIX=/obj TB --- 2010-12-16 06:07:14 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2010-12-16 06:07:14 - TARGET=sparc64 TB --- 2010-12-16 06:07:14 - TARGET_ARCH=sparc64 TB --- 2010-12-16 06:07:14 - TZ=UTC TB --- 2010-12-16 06:07:14 - __MAKE_CONF=/dev/null TB --- 2010-12-16 06:07:14 - cd /src TB --- 2010-12-16 06:07:14 - /usr/bin/make -B buildworld >>> World build started on Thu Dec 16 06:07:14 UTC 2010 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:898: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:911: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:912: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:915: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA512_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:919: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA384_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:994: warning: cast increases required alignment of target type *** Error code 1 Stop in /src/sbin/geom/class/eli. *** Error code 1 Stop in /src/sbin/geom/class. *** Error code 1 Stop in /src/sbin/geom. *** Error code 1 Stop in /src/sbin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2010-12-16 06:58:14 - WARNING: /usr/bin/make returned exit code 1 TB --- 2010-12-16 06:58:14 - ERROR: failed to build world TB --- 2010-12-16 06:58:14 - 2323.77 user 488.67 system 3083.00 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-sparc64-sparc64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
[head tinderbox] failure on sparc64/sun4v
TB --- 2010-12-16 06:30:08 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2010-12-16 06:30:08 - starting HEAD tinderbox run for sparc64/sun4v TB --- 2010-12-16 06:30:08 - cleaning the object tree TB --- 2010-12-16 06:30:20 - cvsupping the source tree TB --- 2010-12-16 06:30:20 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/sparc64/sun4v/supfile TB --- 2010-12-16 06:30:38 - building world TB --- 2010-12-16 06:30:38 - MAKEOBJDIRPREFIX=/obj TB --- 2010-12-16 06:30:38 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2010-12-16 06:30:38 - TARGET=sun4v TB --- 2010-12-16 06:30:38 - TARGET_ARCH=sparc64 TB --- 2010-12-16 06:30:38 - TZ=UTC TB --- 2010-12-16 06:30:38 - __MAKE_CONF=/dev/null TB --- 2010-12-16 06:30:38 - cd /src TB --- 2010-12-16 06:30:38 - /usr/bin/make -B buildworld >>> World build started on Thu Dec 16 06:30:39 UTC 2010 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:898: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:911: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:912: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:915: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA512_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:919: warning: cast increases required alignment of target type /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c: In function 'SHA384_Final': /src/sbin/geom/class/eli/../../../../sys/crypto/sha2/sha2.c:994: warning: cast increases required alignment of target type *** Error code 1 Stop in /src/sbin/geom/class/eli. *** Error code 1 Stop in /src/sbin/geom/class. *** Error code 1 Stop in /src/sbin/geom. *** Error code 1 Stop in /src/sbin. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2010-12-16 07:19:27 - WARNING: /usr/bin/make returned exit code 1 TB --- 2010-12-16 07:19:27 - ERROR: failed to build world TB --- 2010-12-16 07:19:27 - 2309.30 user 479.29 system 2958.90 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-sparc64-sun4v.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Next ZFSv28 patchset ready for testing.
On Wed, Dec 15, 2010 at 10:15:00PM -0500, ben wilber wrote: > On Mon, Dec 13, 2010 at 10:45:56PM +0100, Pawel Jakub Dawidek wrote: > > Hi. > > > > The new patchset is ready for testing: > > Running fine for 24 hours now under load with a ~50 disk v15 (not > upgraded) pool from -CURRENT. Thanks! > > Only strange thing is the rc script complains: > > /etc/rc: DEBUG: run_rc_command: doit: zvol_start > unrecognized command 'volinit' > usage: zfs command args ... Did you run mergemaster(8) after the upgrade? The patch includes change to etc/rc.d/zvol to remove 'zfs volinit'/'zfs volfini' which are no longer available. -- Pawel Jakub Dawidek http://www.wheelsystems.com p...@freebsd.org http://www.FreeBSD.org FreeBSD committer Am I Evil? Yes, I Am! pgp7c4gzudIbP.pgp Description: PGP signature