Re: transferring data (after losing all non-root logins)
On Mon, 23 Jun 2003, Matthew Emmerton wrote: > Well, it really sounds like your password database got got hosed. Does > /etc/master.passwd have entries for all of your non-root users? > If so, then probably all you need to do is regenerate your password > database. The easiest way to do this is run "vipw", make some kind of > change (and undo the change -- this is just so it thinks the file has been > changed) and exit. Your password database will be regenerated. Thanks... better than a workaround, solving the problem is always nice :) All the files, including master.passwd, were fine, which is what puzzled me, but regenerating the password database worked. -David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
transferring data (after losing all non-root logins)
I recently forgot my root password, rebooted single-user and changed it, and immediately afterwards the computer denied the existence of any non-root users (home directories still there for those that had them, they still have login shells, etc.). This was the only change made to the system. This is a -current system from late April that was in storage for a while. I was planning on wiping this system to install 5.1-R anyway, but I need to back up the data first. I can't burn a CD because I didn't have mkisofs installed and can't install it (no man user), I can't run sshd (no ssh user), and I can't figure out how to make telnet allow root logins (I know, a Very Bad Idea(tm) usually, but it's not a security issue when I'm allowing it from one IP for 5 minutes and will be changing passwords anyway). So... I'm think of trying to find another hard drive, to install that and transfer the data. Does anyone have any other ideas? Thanks, -David (please cc:) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: BOOT2_UFS=UFS1_ONLY works for today's current
On Sunday 23 February 2003 11:10 am, Richard Arends wrote: > On Sun, 23 Feb 2003, David Syphers wrote: > > I added BOOT2_UFS=UFS2_ONLY to my make.conf, and my buildworld still dies > > in boot2. I'm trying to upgrade from a Feb. 19 -current (because it's > > crashing all the time, and I need to enable debugging stuff). Is there a > > fix, or would other information be helpful? > > Same problem over here. I reverted back the last commit on > /usr/src/sys/ufs/ffs/fs.h in my source tree and that "fixed" the build. Of > course, this is a workaround !! Okay, I've verified that the problem is due to rev. 1.39 of /usr/src/sys/ufs/ffs/fs.h. Peter Wemm pointed out that the problem is not the commit, but gcc's bad handling of 64-bit operations. Nonetheless, this commit does break world for a lot of people... is there some official solution? The make.conf line only works for UFS1 - if it's set to UFS2, buildworld still fails. (Am I correct in assuming a 5.0-R install defaults to UFS2?) -David -- http://www.seektruth.org Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: BOOT2_UFS=UFS1_ONLY works for today's current
On Saturday 22 February 2003 08:55 pm, Giorgos Keramidas wrote: > Just in case anyone tries to build today's current and sees > it fail because of boot2, you can always set BOOT2_UFS=UFS1_ONLY > or BOOT2_UFS=UFS2_ONLY in your make.conf and rebuild. I added BOOT2_UFS=UFS2_ONLY to my make.conf, and my buildworld still dies in boot2. I'm trying to upgrade from a Feb. 19 -current (because it's crashing all the time, and I need to enable debugging stuff). Is there a fix, or would other information be helpful? -David -- http://www.seektruth.org Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: trouble with ogle performance after going to 5.0-R
On Saturday 01 February 2003 05:43 pm, Scott Long wrote: > Have you made > sure that the DVD drive is using DMA? 'sysctl hw.ata.atapi_dma' will > tell you, and can be set at boot from /boot/loader.conf. This was the main problem. Turning on DMA makes everything run smoothly and drops the load averages significantly. I must have made this change to my 4.x system once about a year ago, and completely forgotten about it since. I should write an addition to the handbook about this... Thanks! -David -- "Whatever it is that the government does, sensible Americans would prefer that the government does it to somebody else. This is the idea behind foreign policy." -P. J. O'Rourke Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
trouble with ogle performance after going to 5.0-R
I recently installed 5.0-R (and KDE 3.1, thus the cc:). Ogle now has terrible performance - very jerky. Last weekend, when this computer (an Athlon XP 1800+) had 4-stable and KDE 3.0.5, ogle perfomance on the same DVD was perfectly smooth. Since ogle didn't change, I assume it's something to do with FreeBSD. Any idea what could be causing it? At first I thought it was that I hadn't put CPU_ENABLE_SSE in my kernel, like I had in 4-stable, but after putting it in, the performance is still just as bad. While playing a DVD the load goes from about 0.02 to about 1.5. Unfortunately I don't know what it did under 4-stable, but if anyone else can compare... -David -- "Whatever it is that the government does, sensible Americans would prefer that the government does it to somebody else. This is the idea behind foreign policy." -P. J. O'Rourke Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: 5.0-DP2 questions
On Friday 29 November 2002 01:32 pm, David Wolfskill wrote: ... > That should, at least, provide a reasonably valid set of comparisons. Thanks. I suppose Robert's results might be abnormally long if -current requires a lot more memory than -stable, thus requiring a lot of swap, as Kris pointed out. Looks like my 486 won't be jumping to -current soon :) -David -- On the whole I am against mass murder. I rarely commit it myself, and often find myself quite out of sympathy with those who make a habit of it. -Bernard Levin Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: 5.0-DP2 questions
On Friday 29 November 2002 12:12 pm, Kris Kennaway wrote: > On Fri, Nov 29, 2002 at 12:11:42PM -0500, Robert Ames wrote: > > > 2. My machine is a Pentium 166 with only 16 MB of RAM. I'm trying > > to rebuild the kernel and so far the compile has been running for > > almost 24 hours and it's not finished yet. Is this to be expected? > > Yes. gcc 3.x is slower, and the kernel contains more code. Your > machine is probably swapping a lot just doing the compilation, which > will make it even slower. Out of curiosity, how much slower is a 5.x kernel compilation than a 4.x, on average? My 486, 66 MHz and 16 MB RAM, compiles a 4.x kernel in about 3 hours. Thus by Robert's data point, -current seems at least 10-15 times slower... -David -- On the whole I am against mass murder. I rarely commit it myself, and often find myself quite out of sympathy with those who make a habit of it. -Bernard Levin Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: The great perl rewrite - progress report
On Tuesday 11 June 2002 06:10 pm, Doug Barton wrote: > On Tue, 11 Jun 2002, Andrew Boothman wrote: > > > Will Andrews wrote: > > > On Thu, Jun 06, 2002 at 05:31:12PM +0100, Mark Murray wrote: > > > > > >>/usr/sbin/sysinstall * - fix - * > > > > > > > > > What part of this uses perl?? > > > > Perhaps it was just a general comment ;-) > > Please don't send guesses to the list. Definitely do not send guesses to > the list when the correct answer was given a long time ago. I think it was a joke, not a guess. Just saying we should all be doing our part to support the libh project :) -David -- Everyone who believes in telekinesis, raise my hand... Astronomy and Astrophysics Center The University of Chicago To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: firewall_enable
On Friday 01 February 2002 11:56 pm, M. Warner Losh wrote: > Actually, there's a simple way around this that is failsafe. > > firewall_enable=YES What it deos now > =NOWide open > =FAILSAFE Defaults to wired down. Before the discussion on -stable degenerated, there were several calls for making this variable tri-state. It definitely seems like the best solution. Now that this is on -current and we have something concrete, maybe it can get committed :) -David To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
xfree86 4?
What are the plans about replacing XFree86 3.3.6 with XFree86 4? The -current archives have a message saying this replacement already took place last October, but the JP SNAP I installed last November certainly wasn't aware of that fact, and the current.freebsd.org snapshot from January 6 still lists 3.3.6 as well. Two more months and it will be two years since XFree86-4.0... Looking at xfree86.org's comparisons of supported video cards, it seems quite obvious that XFree86 4 supports almost everything 3 did, and a lot more. I just got a computer with a nvidia GeForce2 GTS - not exactly a new card, but completely unsupported in 3.3.6 - but well supported in 4.1.0. 3.3.6 is over two years old, and none of the ATI or nvidia cards (and that's just about all desktops, no?) made since then are supported. There's always the port, but integration would be a much more friendly solution. I must be growing lazy :) Out-of-the-box XFree86 4 and easy PPPoE setup led me to use RedHat (desk top only - the server's still FreeBSD, of course), but I'm missing FreeBSD. Apologies if this has already been discussed to death, but such discussions aren't in the -current or -stable archives :) -David To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
XFree86 4.0.2
How should I install XFree86 4.0.2 on a system running a -current snapshot from January 20? I tried downloading the binaries from xfree86.org, but Xinstall.sh complained that my extract file was bad (it wasn't), and when I ran 'sh Xinstall.sh -check' it told me that "binaries are not available for this version" of FreeBSD, namely 5.x, despite the fact that I downloaded the binaries from a directory labeled "FreeBSD 5.x". So I tried the ports, and it built fine for a long time, and then after about 35300 lines of output to the screen, ran into make: don't know how to make ../../../fonts/encodings/encodings.dir. Stop *** Error code 2 Stop in /usr/ports/x11/XFree86-4/work/xc/fonts/bdf. This system is a fresh install, except for a custom kernel and some rc.conf changes. Any suggestions other than waiting until cardbus support _finally_ gets in to -stable so I can stop trying to run -current? Thanks, -David To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
problems configuring cardbus card
I'm running a FreeBSD 5-CURRENT snapshot from Dec. 5, and trying to configure an AmbiCom Cardbus ethernet card (a DEC Tulip base). I've included cardbus, pccbb, miibus, and dc in my kernel, and enabled use of DHCP. Since I haven't tracked -current since 4.x split off from it, I had a great deal of FM to R before I realized things like there's a file called /boot/device.hints that's very important. Putting hint.dc.0.at="isa" hint.dc.0.port="0x300" hint.dc.0.irq="10" into /boot/device.hints made the "watchdog timeout" errors I had been getting on boot go away, but the card still didn't work. Do I need to specify drq or maddr, and how would I determine if 0x300 is the right port? This may be due to the fact that it looks like my graphics card and my ethernet card are both assigned IRQ 11 (see clip from dmesg below). But I really have no idea how to use device.hints or even how to set up an ethernet card under FreeBSD (I know, I should have picked something other than cardbus on -current for my first experience), so any help would be appreciated. Thanks! [part of dmesg output] pci0: at 2.0 irq 11 ... pccbb0: at device 10.0 on pci0 pccbb0: PCI Memory allocated: 1802 pci_cfgintr_unique: hard-routed to irq 11 pci_cfgintr: 0:10 INTA routed to irq 11 cardbus0: on pccbb0 pccbb0: WARNING: cannot attach pccard bus. pccbb1: at device 10.1 on pci0 pccbb1: PCI Memory allocated: 18021000 pci_cfgintr_unique: hard-routed to irq 11 pci_cfgintr: 0:10 INTB routed to irq 11 cardbus1: on pccbb1 pccbb1: WARNING: cannot attach pccard bus. ... pccbb0: card inserted: event=0x0009, state=3b20 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: bad Vcc request. ctrl=0x0, status=0x3b20 pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] pccbb0: bad Vcc request. ctrl=0x33, status=0x3b20 pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] TUPLE: LINKTARGET [3]: 43 49 53 Product version: 5.0 Product name: AmbiCom, Inc. | AMB8100 | Fast Ethernet CardBus PC Card | 1.00 | Manufacturer ID: 13958100 Functions: Network Adaptor, Multi-Functioned Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 cardbus0: Opening BAR: type=IO, bar=10, len=0080 TUPLE: CONFIG_CB [7]: 03 01 00 00 00 00 ff TUPLE: CFTABLE_ENTRY_CB [5]: 41 80 fb 00 ff dc1: port 0x3000-0x307f mem 0x1804-0x1807,0x18022000-0x180223ff irq 11 at device 0.0 on cardbus0 dc1: Ethernet address: 00:80:00:80:00:80 miibus0: on dc1 dcphy0: on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pccbb1: removal of nonexistant card! Note: "dc1" used to be "dc0" before I put the lines in device.hints, but then I got "watchdog timeout" errors. -David Syphers [EMAIL PROTECTED] http://www.seektruth.org/ Cannibalism is a small price to pay for popularity. To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
