Re: 5.2-BETA boot failure
On Sun, 2003-11-30 at 22:49, [EMAIL PROTECTED] wrote: Quoting Jerry Keefe [EMAIL PROTECTED]: I tried upgrading a Dell Optiplex GXa from Release 5.1p10 to the 5.2 Beta using the mini-install CD. The system hangs in the boot loader. This problem doesn't happen with the Release 5.1 CDs. try disabling acpi when you boot from cd via boot menu. -nth I disabled acpi. It didn't help. Still hangs on ata3, which is the CD-ROM. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
5.2-BETA boot failure
I tried upgrading a Dell Optiplex GXa from Release 5.1p10 to the 5.2 Beta using the mini-install CD. The system hangs in the boot loader. This problem doesn't happen with the Release 5.1 CDs. I then tried upgrading from source after getting CURRENT as of 11/29/2003, and was able to build and install the new GENERIC kernel. Upon reboot, the system hangs in the same way as when booting from the mini-install CD. The only thing unusual about this machine is that the onboard EIDE controller is disabled, and a PCI EIDE controller has been added. The system doesn't seem to get far enough to get a dmesg output or a backtrace out of this, but here's a transcript of the last few lines if it helps. Timecounters tick every 10.000 msec ata2-master: WARNING - SETFEATURES recovered from missing interrupt ata2-master: WARNING - SETFEATURES recovered from missing interrupt ata2-slave: WARNING - SETFEATURES recovered from missing interrupt ata2-slave: WARNING - SETFEATURES recovered from missing interrupt ad4: WARNING - SETFEATURES recovered from missing interrupt ad4: WARNING - SETFEATURES recovered from missing interrupt ad4: WARNING - SET_MULTI recovered from missing interrupt GEOM: create disk ad4 dp=0xc23ce960 ad4: 19541MB Maxtor 52049U4 [38703/16/63] at ata2-master UDMA66 ad5: WARNING - SETFEATURES recovered from missing interrupt ad5: WARNING - SETFEATURES recovered from missing interrupt ad5: WARNING - SET_MULTI recovered from missing interrupt GEOM: create disk ad5 dp=0xc23ce660 ad5: 4121MB Maxtor 90432D2 [8374/16/63] at ata2-master UDMA33 ata3-master: WARNING - SETFEATURES recovered from missing interrupt ata3: resetting devices .. machine is hung at this point. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
