Re: /dev/dsp device not configured
i use, device pcmo0 at isa? port 0x220 irq 5 drq 1 for my ESS 1869 sound card From: "Otter" [EMAIL PROTECTED] To: [EMAIL PROTECTED], [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Subject: Re: /dev/dsp device not configured Date: Wed, 19 Apr 2000 23:08:31 -0400 - Original Message - From: "Cosmic 665" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, April 19, 2000 5:44 PM Subject: /dev/dsp device not configured how can I configure/reconfigure /dev/dsp under FreeBSD 4.0?? Did you /dev/MAKEDEV snd0? I keep getting a message stating that the device is not configured!! furthermore my soundcard isn't working right when it should be!! I've also attached my dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS without a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using an ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6 which I've had some issues with in the past (could this be the cause?). below is my dmesg and Kernel thanks -Cosmic-665 P.S. is there a newsgroup for -CURRNET?? what is the address?? here's my dmesg; Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX AMD Features=0x8800SYSCALL,3DNow! real memory = 134201344 (131056K bytes) config di psm0 config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 126738432 (123768K bytes) Preloaded elf kernel "kernel" at 0xc03a1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c. VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117) VESA: 3Dfx Interactive, Inc. K6-family MTRR support enabled (2 registers) md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: AcerLabs M1541 (Aladdin-V) PCI host bridge on motherboard pci0: PCI bus on pcib0 pcib1: AcerLabs M5243 PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: 3Dfx Voodoo Banshee graphics accelerator at 0.0 irq 11 chip1: AcerLabs M15x3 Power Management Unit at device 3.0 on pci0 isab0: AcerLabs M1533 portable PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 dc0: Intel 21143 10/100BaseTX port 0xb800-0xb87f mem 0xdd00-0xdd7f irq 9 at device 9.0 on pci0 dc0: Ethernet address: 00:00:f8:09:34:80 miibus0: MII bus on dc0 dcphy0: Intel 21143 NWAY media interface on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80 dc1: 82c169 PNIC 10/100BaseTX port 0xb400-0xb4ff mem 0xdc80-0xdc8000ff irq 12 at device 10.0 on pci0 dc1: Ethernet address: 00:a0:cc:5d:6c:d0 miibus1: MII bus on dc1 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: AcerLabs Aladdin ATA33 controller port 0xb000-0xb00f irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x200 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0
/dev/dsp device not configured
how can I configure/reconfigure /dev/dsp under FreeBSD 4.0?? I keep getting a message stating that the device is not configured!! furthermore my soundcard isn't working right when it should be!! I've also attached my dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS without a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using an ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6 which I've had some issues with in the past (could this be the cause?). below is my dmesg and Kernel thanks -Cosmic-665 P.S. is there a newsgroup for -CURRNET?? what is the address?? here's my dmesg; Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX AMD Features=0x8800SYSCALL,3DNow! real memory = 134201344 (131056K bytes) config di psm0 config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 126738432 (123768K bytes) Preloaded elf kernel "kernel" at 0xc03a1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c. VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117) VESA: 3Dfx Interactive, Inc. K6-family MTRR support enabled (2 registers) md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: AcerLabs M1541 (Aladdin-V) PCI host bridge on motherboard pci0: PCI bus on pcib0 pcib1: AcerLabs M5243 PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: 3Dfx Voodoo Banshee graphics accelerator at 0.0 irq 11 chip1: AcerLabs M15x3 Power Management Unit at device 3.0 on pci0 isab0: AcerLabs M1533 portable PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 dc0: Intel 21143 10/100BaseTX port 0xb800-0xb87f mem 0xdd00-0xdd7f irq 9 at device 9.0 on pci0 dc0: Ethernet address: 00:00:f8:09:34:80 miibus0: MII bus on dc0 dcphy0: Intel 21143 NWAY media interface on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80 dc1: 82c169 PNIC 10/100BaseTX port 0xb400-0xb4ff mem 0xdc80-0xdc8000ff irq 12 at device 10.0 on pci0 dc1: Ethernet address: 00:a0:cc:5d:6c:d0 miibus1: MII bus on dc1 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: AcerLabs Aladdin ATA33 controller port 0xb000-0xb00f irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x200 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppi0: Parallel I/O on ppbus0 ppi0: can't allocate irq device_probe_and_attach: ppi0 attach returned 12 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port plip0: PLIP network interface on ppbus0 unknown: PNP0401 can't assign resources unknown: PNP0501 can't assign resources unknown: PNP0501 can't assign resources unknown: PNP0700 can't assign resources unknown0: PNP0c01 at iomem 0-0x9,0x10-0x7ff,0xe8000-0xe,0xf-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfbfff,0xfc000-0xf,0xfffe-0x on isa0 unknown: PNP can't assign resources unknown1: PNP0100
RE: /dev/dsp device not configured
Okay, here's your decent explanation: your PNP sound card has been located and attached at sbc1, right after the bogus sbc0 statically hardcoded in your kernel config file. :) You should need ONLY the following lines in your conf file for your particular setup: device pcm device sbc That should get your soundcard to appear as soundcard #0. There's an astounding array of other cruft in your conf file that needs to go, but if you're just puttering around and experimenting, do what you like. BTW, "cat /dev/sndstat" is your friend. Jason Young Access US(tm) Chief Network Engineer -Original Message- From: Cosmic 665 [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 19, 2000 4:45 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: /dev/dsp device not configured how can I configure/reconfigure /dev/dsp under FreeBSD 4.0?? I keep getting a message stating that the device is not configured!! furthermore my soundcard isn't working right when it should be!! I've also attached my dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS without a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using an ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6 which I've had some issues with in the past (could this be the cause?). below is my dmesg and Kernel thanks -Cosmic-665 P.S. is there a newsgroup for -CURRNET?? what is the address?? here's my dmesg; Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX AMD Features=0x8800SYSCALL,3DNow! real memory = 134201344 (131056K bytes) config di psm0 config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 126738432 (123768K bytes) Preloaded elf kernel "kernel" at 0xc03a1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c. VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117) VESA: 3Dfx Interactive, Inc. K6-family MTRR support enabled (2 registers) md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: AcerLabs M1541 (Aladdin-V) PCI host bridge on motherboard pci0: PCI bus on pcib0 pcib1: AcerLabs M5243 PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: 3Dfx Voodoo Banshee graphics accelerator at 0.0 irq 11 chip1: AcerLabs M15x3 Power Management Unit at device 3.0 on pci0 isab0: AcerLabs M1533 portable PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 dc0: Intel 21143 10/100BaseTX port 0xb800-0xb87f mem 0xdd00-0xdd7f irq 9 at device 9.0 on pci0 dc0: Ethernet address: 00:00:f8:09:34:80 miibus0: MII bus on dc0 dcphy0: Intel 21143 NWAY media interface on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80 dc1: 82c169 PNIC 10/100BaseTX port 0xb400-0xb4ff mem 0xdc80-0xdc8000ff irq 12 at device 10.0 on pci0 dc1: Ethernet address: 00:a0:cc:5d:6c:d0 miibus1: MII bus on dc1 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: AcerLabs Aladdin ATA33 controller port 0xb000-0xb00f irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 vga0: Generic ISA VGA a
Re: /dev/dsp device not configured
- Original Message - From: "Cosmic 665" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, April 19, 2000 5:44 PM Subject: /dev/dsp device not configured how can I configure/reconfigure /dev/dsp under FreeBSD 4.0?? Did you /dev/MAKEDEV snd0? I keep getting a message stating that the device is not configured!! furthermore my soundcard isn't working right when it should be!! I've also attached my dmesg and kernel config. BTW, I'm currnetly using 5.0-CURRENT as of last night (BUT THAT ISN't the cause of this so plz.. DON'T TELL ME IT IS without a decent explaination!!!) I've also tried this in 4.0 and 3.4. I'm using an ESS 1869 pnp (with the sbc sound adapter). Also, I'm running Xfree86 3.3.6 which I've had some issues with in the past (could this be the cause?). below is my dmesg and Kernel thanks -Cosmic-665 P.S. is there a newsgroup for -CURRNET?? what is the address?? here's my dmesg; Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Tue Apr 18 22:15:25 PDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/MATRIX Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX AMD Features=0x8800SYSCALL,3DNow! real memory = 134201344 (131056K bytes) config di psm0 config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 126738432 (123768K bytes) Preloaded elf kernel "kernel" at 0xc03a1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a109c. VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033e477 (1000117) VESA: 3Dfx Interactive, Inc. K6-family MTRR support enabled (2 registers) md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: AcerLabs M1541 (Aladdin-V) PCI host bridge on motherboard pci0: PCI bus on pcib0 pcib1: AcerLabs M5243 PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: 3Dfx Voodoo Banshee graphics accelerator at 0.0 irq 11 chip1: AcerLabs M15x3 Power Management Unit at device 3.0 on pci0 isab0: AcerLabs M1533 portable PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 dc0: Intel 21143 10/100BaseTX port 0xb800-0xb87f mem 0xdd00-0xdd7f irq 9 at device 9.0 on pci0 dc0: Ethernet address: 00:00:f8:09:34:80 miibus0: MII bus on dc0 dcphy0: Intel 21143 NWAY media interface on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: supplying EUI64: 00:00:f8:ff:fe:09:34:80 dc1: 82c169 PNIC 10/100BaseTX port 0xb400-0xb4ff mem 0xdc80-0xdc8000ff irq 12 at device 10.0 on pci0 dc1: Ethernet address: 00:a0:cc:5d:6c:d0 miibus1: MII bus on dc1 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: AcerLabs Aladdin ATA33 controller port 0xb000-0xb00f irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x200 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppi0: Parallel I/O on ppbus0 ppi0: can't allocate irq device_probe_and_attach: ppi0 attach returned 12 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port plip0: PLIP network interface on ppbus0 un
