On Sun, 17 Oct 1999, Andreas Klemm wrote:
> See ed0
> When running a current kernel of some days ago, no problems.
> Were there perhaps changes in the last days that introduce
> this, that some NICs doesn't run ?
> Even the xl0 interface didn't run (DMZ). Ping to hosts in
> internet didn't succeed.
I believe I've tracked this down. I'll commit a fix once I've verified
it.
> Copyright (c) 1992-1999 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.0-CURRENT #0: Sun Oct 17 00:40:49 CEST 1999
> [EMAIL PROTECTED]:/usr/src/sys/compile/TITAN
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium Pro (199.43-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x619 Stepping = 9
> Features=0xfbff
> real memory = 159383552 (155648K bytes)
> avail memory = 151044096 (147504K bytes)
> Programming 24 pins in IOAPIC #0
> FreeBSD/SMP: Multiprocessor motherboard
> cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee0
> cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee0
> io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0
> Preloaded elf kernel "kernel" at 0xc030c000.
> Pentium Pro MTRR support enabled
> ccd0-3: Concatenated disk drivers
> npx0: on motherboard
> npx0: INT 16 interface
> pcib0: on motherboard
> pci0: on pcib0
> isab0: at device 7.0 on pci0
> isa0: on isab0
> chip1: at device 7.1 on pci0
> vga-pci0: at device 10.0 on pci0
> xl0: <3Com 3c900-COMBO Etherlink XL> irq 19 at device 11.0 on pci0
> xl0: Ethernet address: 00:60:97:aa:3a:db
> xl0: selecting 10baseT transceiver, half duplex
> pci0: unknown card (vendor=0x1102, dev=0x0002) at 12.0 irq 18
> pci0: unknown card (vendor=0x1102, dev=0x7002) at 12.1
> ahc0: irq 17 at device 13.0 on pci0
> ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
> ahc1: irq 16 at device 14.0 on pci0
> ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
> fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: at port 0x60-0x6f on isa0
> atkbd0: irq 1 on atkbdc0
> psm0: irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0
> sc0: on isa0
> sc0: VGA <4 virtual consoles, flags=0x200>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/15 bytes threshold
> plip0: on ppbus 0
> lpt0: on ppbus 0
> lpt0: Interrupt-driven port
> ppi0: on ppbus 0
> ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 10 on isa0
> ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit)
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: routing 8254 via pin 2
> IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
>logging limited to 100 packets/entry by default
> DUMMYNET initialized (990811)
> Waiting 8 seconds for SCSI devices to settle
> SMP: AP CPU #1 Launched!
> Creating DISK da0
> Creating DISK da1
> Creating DISK da2
> Creating DISK da3
> sa0 at ahc1 bus 0 target 4 lun 0
> sa0: Removable Sequential Access SCSI-2 device
> sa0: 4.807MB/s transfers (4.807MHz, offset 8)
> Creating DISK cd0
> Creating DISK cd1
> changing root device to da0s2a
> cd1 at ahc1 bus 0 target 5 lun 0
> cd1: Removable CD-ROM SCSI-2 device
> cd1: 10.000MB/s transfers (10.000MHz, offset 8)
> cd1: Attempt to query device size failed: NOT READY, Medium not present
> cd0 at ahc0 bus 0 target 6 lun 0
> cd0: Removable CD-ROM SCSI-2 device
> cd0: 10.000MB/s transfers (10.000MHz, offset 15)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> da3 at ahc0 bus 0 target 3 lun 0
> da3: Fixed Direct Access SCSI-2 device
> da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
> da3: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> da1 at ahc0 bus 0 target 1 lun 0
> da1: Fixed Direct Access SCSI-2 device
> da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
> da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> da0 at ahc0 bus 0 target 0 lun 0
> da0: Fixed Direct Access SCSI-2 device
> da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
> da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> da2 at ahc0 bus 0 target 2 lun 0
> da2: Fixed Direct Access SCSI-2 device
> da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
> da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> ed0: remote transmit DMA failed to complete
>
> ed0: NIC memory corrupt - invalid packet length 11564
>
> xl0: promiscuous mode enabled
>
>
>
--
| Matthew N. Dodd | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD |
| [EMAIL PROTECTED] | 2 x '84 Volv
