Re: Anyone ported HCF/HSF modem drivers to FreeBSD?
Daniel O'Connor wrote: > On Monday 01 September 2003 08:41, Mark Kettenis wrote: > >I asked this on -hackers a little while ago but no response. I'm > > curious if anyone has made an attempt to port these Winmodem drivers. > >http://www.linuxant.com/drivers/ > > > > I did look into it, but concluded that it was pretty hopeless. For > > starters, the DSP routines in there seem to need the FPU, and FreeBSD > > doesn't seem to allow that in the kernel. Apart from that, almost > > I don't think that would be _that_ hard to fix at least for that specific > driver, but I'm not 100% sure. I ported the HCF driver for use on my Sony VAIO, a while back, and the author of the thing was kind enough to compile it as PIC so that I could load it as a kernel module. The FPU stuff is pretty embedded; without disassembling, changing, and reassembling the code, which is prohibited by the license, there's really no way to yank the FPU stuff out. So you have to change the lazy FPU context switching, to enable use of the FPU inside the kernel. Which really blows, on many levels. > > 100% of the code is in the binary-only modules, including a lot of > > Linux-specific code, which makes it very hard to see how the code is > > supposed to interface with the kernel. > > Have you seen these drivers -> > http://www.smlink.com/main/index1.php?ln=en&main_id=32 No good for the HCF modems. > And the binary code appears to only call shim routines for which the source is > available. The HCF drivers have threading and timer code dependencies. They also have an expectation of being able to import symbols from the Linux kernel (though most of them actually use a jump-table via a registration function that you pass a structure to). The main problem I ran into was the FPU code; the next main problem was the PIC code (as I said, though, the author was willing to go PIC on the code, and I believe that's still how it's now distributed for Linux). The next main problem was emulating enough of the Linux kernel environment to pass glue functions down to the modem (and the big mess there was interval timers -- the driver tends to use a lot of CPU time). I would really recommend what I ended up doing, which is leaving the FPU code along and using a real modem in a PCMCIA slot, instead. -- Terry ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Anyone ported HCF/HSF modem drivers to FreeBSD?
On Monday 01 September 2003 08:41, Mark Kettenis wrote: >Date: Sun, 31 Aug 2003 15:02:36 -0700 (PDT) >From: Nate Lawson <[EMAIL PROTECTED]> > >I asked this on -hackers a little while ago but no response. I'm > curious if anyone has made an attempt to port these Winmodem drivers. >http://www.linuxant.com/drivers/ > > I did look into it, but concluded that it was pretty hopeless. For > starters, the DSP routines in there seem to need the FPU, and FreeBSD > doesn't seem to allow that in the kernel. Apart from that, almost I don't think that would be _that_ hard to fix at least for that specific driver, but I'm not 100% sure. > 100% of the code is in the binary-only modules, including a lot of > Linux-specific code, which makes it very hard to see how the code is > supposed to interface with the kernel. Have you seen these drivers -> http://www.smlink.com/main/index1.php?ln=en&main_id=32 It seems to support a lot of software modems, ie HAMR5600 based AMR/CNR/MDC/ACR modem cards on the following Southbridge chips: - Intel ICH0, ICH2 - Via 686A, 686B, 8231, 8233 - SiS 630 - ALI 1535. SmartPCI56, SmartPCI561, SmartPCI563 based PCI modem cards. SmartUSB56 based USB modem. And the binary code appears to only call shim routines for which the source is available. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 9A8C 569F 685A D928 5140 AE4B 319B 41F4 5D17 FDD5 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Anyone ported HCF/HSF modem drivers to FreeBSD?
Date: Sun, 31 Aug 2003 15:02:36 -0700 (PDT) From: Nate Lawson <[EMAIL PROTECTED]> I asked this on -hackers a little while ago but no response. I'm curious if anyone has made an attempt to port these Winmodem drivers. http://www.linuxant.com/drivers/ I did look into it, but concluded that it was pretty hopeless. For starters, the DSP routines in there seem to need the FPU, and FreeBSD doesn't seem to allow that in the kernel. Apart from that, almost 100% of the code is in the binary-only modules, including a lot of Linux-specific code, which makes it very hard to see how the code is supposed to interface with the kernel. Mark ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Anyone ported HCF/HSF modem drivers to FreeBSD?
--On Sunday, August 31, 2003 15:02:36 -0700 Nate Lawson <[EMAIL PROTECTED]> wrote: I asked this on -hackers a little while ago but no response. I'm curious if anyone has made an attempt to port these Winmodem drivers. http://www.linuxant.com/drivers/ I've been asking for a year and a half, and nobody's expressed an interest. I have an HSF modem in this laptop: pci0: at device 31.6 (no driver attached) [EMAIL PROTECTED]:31:6:class=0x070300 card=0x10d110cf chip=0x24868086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:31:6:class=0x070300 card=0x10d110cf chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class= simple comms -Nate ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Anyone ported HCF/HSF modem drivers to FreeBSD?
I asked this on -hackers a little while ago but no response. I'm curious if anyone has made an attempt to port these Winmodem drivers. http://www.linuxant.com/drivers/ -Nate ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"