Booting from the 4.0 RC3 Floppy disks..
I get the following error: atapci0 port 0xff08-0xff0b,0x3f4-0x3f7,0x1f0-0x1f7, IRQ14 at device 3.0 on PCI0 atapci0:Bus mastering DMA not supported panic - resource_list_alloc resource list entry is busy uptime 0s (sorry couldn't resist the last entry)... Ok.. Got this in an attempt to install the RC3, onto a machine presently running 3.4 successfully... The only change I made to the configuration was to change the port on the NE2000 network card from 0x280 to 0x300 (what it's set to). To sum it up... HELP --- dmesg from the boot after trying to install 4.0 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Wed Jan 5 11:21:46 EST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/Snoopy Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 36826433 Hz CPU: Pentium/P54C (36.83-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping = 1 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38539264 (37636K bytes) Bad BIOS32 Service Directory! Probing for devices on PCI bus 0: chip0: rev 0x10 on pci0.0.0 chip1: rev 0x03 on pci0.2.0 wdc0: rev 0x01 int a irq 14 on pci0.3.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:00:e8:a3:65:34, type NE2000 (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 2445MB (5008752 sectors), 4969 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 815MB (1669248 sectors), 1656 cyls, 16 heads, 63 S/T, 512 B/S ppc0 not found ze0 not probed due to I/O address conflict with ed0 at 0x300 zp0 not probed due to I/O address conflict with ed0 at 0x300 vga0 at 0x3b0-0x3df maddr 0xa msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s1a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Booting from the 4.0 RC3 Floppy disks..
I get the following error: atapci0 port 0xff08-0xff0b,0x3f4-0x3f7,0x1f0-0x1f7, IRQ14 at device 3.0 on PCI0 atapci0:Bus mastering DMA not supported panic - resource_list_alloc resource list entry is busy uptime 0s (sorry couldn't resist the last entry)... Ok.. Got this in an attempt to install the RC3, onto a machine presently running 3.4 successfully... The only change I made to the configuration was to change the port on the NE2000 network card from 0x280 to 0x300 (what it's set to). To sum it up... HELP --- dmesg from the boot after trying to install 4.0 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Wed Jan 5 11:21:46 EST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/Snoopy Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 36826433 Hz CPU: Pentium/P54C (36.83-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping = 1 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38539264 (37636K bytes) Bad BIOS32 Service Directory! Probing for devices on PCI bus 0: chip0: rev 0x10 on pci0.0.0 chip1: rev 0x03 on pci0.2.0 wdc0: rev 0x01 int a irq 14 on pci0.3.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:00:e8:a3:65:34, type NE2000 (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 2445MB (5008752 sectors), 4969 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 815MB (1669248 sectors), 1656 cyls, 16 heads, 63 S/T, 512 B/S ppc0 not found ze0 not probed due to I/O address conflict with ed0 at 0x300 zp0 not probed due to I/O address conflict with ed0 at 0x300 vga0 at 0x3b0-0x3df maddr 0xa msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s1a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Booting from the 4.0 RC3 Floppy disks..
I get the following error: atapci0 port 0xff08-0xff0b,0x3f4-0x3f7,0x1f0-0x1f7, IRQ14 at device 3.0 on PCI0 atapci0:Bus mastering DMA not supported panic - resource_list_alloc resource list entry is busy uptime 0s (sorry couldn't resist the last entry)... Ok.. Got this in an attempt to install the RC3, onto a machine presently running 3.4 successfully... The only change I made to the configuration was to change the port on the NE2000 network card from 0x280 to 0x300 (what it's set to). To sum it up... HELP --- dmesg from the boot after trying to install 4.0 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Wed Jan 5 11:21:46 EST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/Snoopy Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 36826433 Hz CPU: Pentium/P54C (36.83-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping = 1 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38539264 (37636K bytes) Bad BIOS32 Service Directory! Probing for devices on PCI bus 0: chip0: rev 0x10 on pci0.0.0 chip1: rev 0x03 on pci0.2.0 wdc0: rev 0x01 int a irq 14 on pci0.3.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:00:e8:a3:65:34, type NE2000 (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 2445MB (5008752 sectors), 4969 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 815MB (1669248 sectors), 1656 cyls, 16 heads, 63 S/T, 512 B/S ppc0 not found ze0 not probed due to I/O address conflict with ed0 at 0x300 zp0 not probed due to I/O address conflict with ed0 at 0x300 vga0 at 0x3b0-0x3df maddr 0xa msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s1a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Booting from the 4.0 RC3 Floppy disks..
I get the following error: atapci0 port 0xff08-0xff0b,0x3f4-0x3f7,0x1f0-0x1f7, IRQ14 at device 3.0 on PCI0 atapci0:Bus mastering DMA not supported panic - resource_list_alloc resource list entry is busy uptime 0s (sorry couldn't resist the last entry)... Ok.. Got this in an attempt to install the RC3, onto a machine presently running 3.4 successfully... The only change I made to the configuration was to change the port on the NE2000 network card from 0x280 to 0x300 (what it's set to). To sum it up... HELP --- dmesg from the boot after trying to install 4.0 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Wed Jan 5 11:21:46 EST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/Snoopy Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 36826433 Hz CPU: Pentium/P54C (36.83-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping = 1 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38539264 (37636K bytes) Bad BIOS32 Service Directory! Probing for devices on PCI bus 0: chip0: rev 0x10 on pci0.0.0 chip1: rev 0x03 on pci0.2.0 wdc0: rev 0x01 int a irq 14 on pci0.3.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:00:e8:a3:65:34, type NE2000 (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 2445MB (5008752 sectors), 4969 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 815MB (1669248 sectors), 1656 cyls, 16 heads, 63 S/T, 512 B/S ppc0 not found ze0 not probed due to I/O address conflict with ed0 at 0x300 zp0 not probed due to I/O address conflict with ed0 at 0x300 vga0 at 0x3b0-0x3df maddr 0xa msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s1a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message