Re: Problem with Radeon
I did install the ports,thank youFilippo On Tuesday, June 7, 2022 at 02:15:50 PM GMT+2, Emmanuel Vadot wrote: On Tue, 7 Jun 2022 12:10:35 + (UTC) Filippo Moretti wrote: > I have reinstalled CURRENT and I get an error while trying to initialize > radeon:it was working fine before reinstalling CURRENT. > > [drm] radeon kernel modesetting enabled. > > drmn0: on vgapci0 > > vgapci0: child drmn0 requested pci_enable_io > > vgapci0: child drmn0 requested pci_enable_io > > sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! > > [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1043:0x0356 > 0x00) . > > [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for > ATO M IIO > > ATOM BIOS: 68D8.12.17.0.4.AS06.U122 > drmn0: VRAM: 1024M 0x - 0x3FFF (1024M used) > drmn0: GTT: 1024M 0x4000 - 0x7FFF > [drm] Detected VRAM RAM=1024M, BAR=256M > [drm] RAM width 128bits DDR > [TTM] Zone kernel: Available graphics memory: 8373714 KiB > [TTM] Zone dma32: Available graphics memory: 2097152 KiB > [TTM] Initializing pool allocator > [drm] radeon: 1024M of VRAM memory ready > [drm] radeon: 1024M of GTT memory ready. > [drm] Loading REDWOOD Microcode > drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin' > r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin" > [drm ERROR :evergreen_init] Failed to load firmware! > drmn0: Fatal error during GPU init > [drm] radeon: finishing device. > [TTM] Finalizing pool allocator > [TTM] Zone kernel: Used memory at exit: 0 KiB > [TTM] Zone dma32: Used memory at exit: 0 KiB > [drm] radeon: ttm finalized > Warning: can't remove non-dynamic nodes (dri)! > device_attach: drmn0 attach returned 2 > acpi_wmi0: on acpi0 > These are the ports installed:drm-510-kmod-5.10.113_1 DRM drivers > modules > drm-kmod-20220501 Metaport of DRM modules for the linuxkpi-based > KMS components > gpu-firmware-amd-kmod-banks-20220511 Firmware modules for banks AMD GPUs > gpu-firmware-kmod-20220511,1 Firmware modules for the drm-kmod drivers > gpu-firmware-radeon-kmod-aruba-20220511 Firmware modules for aruba Radeon GPUs "drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin'" You don't have the firmware installed for your card. How did you installed the packages ? because I see that you have gpu-firmware-kmod so it should have installed all of them. Anyway, pkg install gpu-firmware-radeon-kmod-redwood should solve your problems. > FreeBSD STING 14.0-CURRENT FreeBSD 14.0-CURRENT #1 main-85d7875d42: Mon Jun > 6 13:40:11 CEST 2022 filippo@STING:/usr/obj/usr/src/amd64.amd64/sys/STING > amd64 -- Emmanuel Vadot
Re: Problem with Radeon
On Tue, 7 Jun 2022 12:10:35 + (UTC) Filippo Moretti wrote: > I have reinstalled CURRENT and I get an error while trying to initialize > radeon:it was working fine before reinstalling CURRENT. > > [drm] radeon kernel modesetting enabled. > > drmn0: on vgapci0 > > vgapci0: child drmn0 requested pci_enable_io > > vgapci0: child drmn0 requested pci_enable_io > > sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! > > [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1043:0x0356 > 0x00) . > > [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for > ATO M IIO > > ATOM BIOS: 68D8.12.17.0.4.AS06.U122 > drmn0: VRAM: 1024M 0x - 0x3FFF (1024M used) > drmn0: GTT: 1024M 0x4000 - 0x7FFF > [drm] Detected VRAM RAM=1024M, BAR=256M > [drm] RAM width 128bits DDR > [TTM] Zone kernel: Available graphics memory: 8373714 KiB > [TTM] Zone dma32: Available graphics memory: 2097152 KiB > [TTM] Initializing pool allocator > [drm] radeon: 1024M of VRAM memory ready > [drm] radeon: 1024M of GTT memory ready. > [drm] Loading REDWOOD Microcode > drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin' > r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin" > [drm ERROR :evergreen_init] Failed to load firmware! > drmn0: Fatal error during GPU init > [drm] radeon: finishing device. > [TTM] Finalizing pool allocator > [TTM] Zone kernel: Used memory at exit: 0 KiB > [TTM] Zone dma32: Used memory at exit: 0 KiB > [drm] radeon: ttm finalized > Warning: can't remove non-dynamic nodes (dri)! > device_attach: drmn0 attach returned 2 > acpi_wmi0: on acpi0 > These are the ports installed:drm-510-kmod-5.10.113_1 DRM drivers > modules > drm-kmod-20220501 Metaport of DRM modules for the linuxkpi-based > KMS components > gpu-firmware-amd-kmod-banks-20220511 Firmware modules for banks AMD GPUs > gpu-firmware-kmod-20220511,1 Firmware modules for the drm-kmod drivers > gpu-firmware-radeon-kmod-aruba-20220511 Firmware modules for aruba Radeon GPUs "drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin'" You don't have the firmware installed for your card. How did you installed the packages ? because I see that you have gpu-firmware-kmod so it should have installed all of them. Anyway, pkg install gpu-firmware-radeon-kmod-redwood should solve your problems. > FreeBSD STING 14.0-CURRENT FreeBSD 14.0-CURRENT #1 main-85d7875d42: Mon Jun > 6 13:40:11 CEST 2022 filippo@STING:/usr/obj/usr/src/amd64.amd64/sys/STING > amd64 -- Emmanuel Vadot
Problem with Radeon
I have reinstalled CURRENT and I get an error while trying to initialize radeon:it was working fine before reinstalling CURRENT. [drm] radeon kernel modesetting enabled. drmn0: on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1043:0x0356 0x00) . [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATO M IIO ATOM BIOS: 68D8.12.17.0.4.AS06.U122 drmn0: VRAM: 1024M 0x - 0x3FFF (1024M used) drmn0: GTT: 1024M 0x4000 - 0x7FFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 8373714 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 1024M of GTT memory ready. [drm] Loading REDWOOD Microcode drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin' r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin" [drm ERROR :evergreen_init] Failed to load firmware! drmn0: Fatal error during GPU init [drm] radeon: finishing device. [TTM] Finalizing pool allocator [TTM] Zone kernel: Used memory at exit: 0 KiB [TTM] Zone dma32: Used memory at exit: 0 KiB [drm] radeon: ttm finalized Warning: can't remove non-dynamic nodes (dri)! device_attach: drmn0 attach returned 2 acpi_wmi0: on acpi0 These are the ports installed:drm-510-kmod-5.10.113_1 DRM drivers modules drm-kmod-20220501 Metaport of DRM modules for the linuxkpi-based KMS components gpu-firmware-amd-kmod-banks-20220511 Firmware modules for banks AMD GPUs gpu-firmware-kmod-20220511,1 Firmware modules for the drm-kmod drivers gpu-firmware-radeon-kmod-aruba-20220511 Firmware modules for aruba Radeon GPUs FreeBSD STING 14.0-CURRENT FreeBSD 14.0-CURRENT #1 main-85d7875d42: Mon Jun 6 13:40:11 CEST 2022 filippo@STING:/usr/obj/usr/src/amd64.amd64/sys/STING amd64
