Re: Problem with ebook reader on usb
On 12/23/13 15:23, Marc UBM wrote: On Sun, 8 Dec 2013 22:54:25 +0100 Marc "UBM" Bocklet wrote: On Sun, 8 Dec 2013 22:44:33 +0100 Marc "UBM" Bocklet wrote: Hiho! :-) I got myself a new ebook reader (Onyx M92), but encountered a strange problem when connecting it to my freebsd machine. Shortly after mounting it, the device gets disconnected (causing the mounted storage to disappear). There is no such behavior with Windows 7. uname -a: FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #11 r258254M: Sun Nov 17 13:38:01 CET 2013 xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 Following up: With FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #16 r258254:259095M: Sun Dec 15 08:53:22 CET 2013 xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 the problem has disappeared. Hi, Thank you! Probably one of the XHCI patches. --HPS ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Problem with ebook reader on usb
On Sun, 8 Dec 2013 22:54:25 +0100 Marc "UBM" Bocklet wrote: > On Sun, 8 Dec 2013 22:44:33 +0100 > Marc "UBM" Bocklet wrote: > > > > > Hiho! :-) > > > > I got myself a new ebook reader (Onyx M92), but encountered a strange > > problem when connecting it to my freebsd machine. Shortly after > > mounting it, the device gets disconnected (causing the mounted storage > > to disappear). There is no such behavior with Windows 7. > > > > uname -a: > > FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #11 > > r258254M: Sun Nov 17 13:38:01 CET 2013 > > xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 Following up: With FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #16 r258254:259095M: Sun Dec 15 08:53:22 CET 2013 xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 the problem has disappeared. Bye Marc ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: Problem with ebook reader on usb
On Sun, 8 Dec 2013 22:44:33 +0100 Marc "UBM" Bocklet wrote: > > Hiho! :-) > > I got myself a new ebook reader (Onyx M92), but encountered a strange > problem when connecting it to my freebsd machine. Shortly after > mounting it, the device gets disconnected (causing the mounted storage > to disappear). There is no such behavior with Windows 7. > > uname -a: > FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #11 > r258254M: Sun Nov 17 13:38:01 CET 2013 > xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 > > > The device identifies as follows: > > Dec 2 17:45:51 ubm kernel: ugen4.2: with fsl-usb2-udc> at usbus4 > > Dec 2 17:45:51 ubm kernel: umass0: on usbus4 > > Dec 2 17:45:51 ubm kernel: da0 at umass-sim0 bus 0 scbus3 target 0 lun > 0 > > Dec 2 17:45:51 ubm kernel: da0: > Removable Direct Access SCSI-2 device > > Dec 2 17:45:51 ubm kernel: da0:40.000MB/s transfers > > Dec 2 17:45:51 ubm kernel: da0: 3156MB (6463552 512 byte sectors: 255H > 63S/T 402C) > > Dec 2 17:45:51 ubm kernel: da0: quirks=0x2 > > I tried setting (widly guessing): > hw.usb.power_timeout: 30 -> 0 > hw.usb.no_cs_fail: 0 -> 1 > > but to no avail. > > Setting "hw.usb.debug: 1" yields no additional output. > > usbconfig dump_device_desc yields: > ugen4.2: fsl-usb2-udc> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x > bDeviceSubClass = 0x > bDeviceProtocol = 0x > bMaxPacketSize0 = 0x0040 > idVendor = 0x0525 > idProduct = 0xa4a5 > bcdDevice = 0x0326 > iManufacturer = 0x0001 fsl-usb2-udc> iProduct = 0x0002 > iSerialNumber = 0x0003 <3230204E6F76> > bNumConfigurations = 0x0001 > > Anybody got any ideas? :-) Some further data: the mass storage usually remains mounted if there is NO read/write activity. Read activity seems to immediately cause a disconnect. Writing behaves differently, I just managed to copy a 1.4M file onto it, it disconnected seconds after finishing. The copied file is not corrupted. Bye Marc ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Problem with ebook reader on usb
Hiho! :-) I got myself a new ebook reader (Onyx M92), but encountered a strange problem when connecting it to my freebsd machine. Shortly after mounting it, the device gets disconnected (causing the mounted storage to disappear). There is no such behavior with Windows 7. uname -a: FreeBSD xxx 11.0-CURRENT FreeBSD 11.0-CURRENT #11 r258254M: Sun Nov 17 13:38:01 CET 2013 xxx:/usr/obj/usr/src/sys/SUBMARINE_SMP amd64 The device identifies as follows: Dec 2 17:45:51 ubm kernel: ugen4.2: at usbus4 Dec 2 17:45:51 ubm kernel: umass0: on usbus4 Dec 2 17:45:51 ubm kernel: da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 Dec 2 17:45:51 ubm kernel: da0: Removable Direct Access SCSI-2 device Dec 2 17:45:51 ubm kernel: da0:40.000MB/s transfers Dec 2 17:45:51 ubm kernel: da0: 3156MB (6463552 512 byte sectors: 255H 63S/T 402C) Dec 2 17:45:51 ubm kernel: da0: quirks=0x2 I tried setting (widly guessing): hw.usb.power_timeout: 30 -> 0 hw.usb.no_cs_fail: 0 -> 1 but to no avail. Setting "hw.usb.debug: 1" yields no additional output. usbconfig dump_device_desc yields: ugen4.2: at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x bDeviceSubClass = 0x bDeviceProtocol = 0x bMaxPacketSize0 = 0x0040 idVendor = 0x0525 idProduct = 0xa4a5 bcdDevice = 0x0326 iManufacturer = 0x0001 iProduct = 0x0002 iSerialNumber = 0x0003 <3230204E6F76> bNumConfigurations = 0x0001 Anybody got any ideas? :-) Bye Marc ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"