Extending the ddb command set
Hello hackers, I am currently working on a small project and would like to add a few commands to the set that is available in ddb. I found that very interesting albeit succinct presentation: http://people.freebsd.org/~jhb/papers/bsdcan/2008/slides.odphttp://people.freebsd.org/%7Ejhb/papers/bsdcan/2008/slides.odp where the author hints that I should use DB_COMMAND, which I did. Yet when invoking ddb, the command does not appear in the help list. I have taken a look at the source code and was expecting set_db_cmd_set to appear in my module's section list when calling objdump -h Is DB_COMMAND only working within the kernel itself, and not modules? Guillaume ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Building custom kernel with new files
Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? Thanks for any help. Ryan French. ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Building custom kernel with new files
On Sat, Aug 16, 2008 at 10:10:02PM +1200, Ryan French wrote: Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? how do you build the kernel? adding to conf/files and conf/options should be sufficient... ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Building custom kernel with new files
2008/8/16, Ryan French [EMAIL PROTECTED]: Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? Ryan, can you please past the error message? More specifically, missing .o are about your newly included files or other? This can happen, for example, if the consumer of a subsystem wants to use it and the subsystem is not compiled (the stack(9) without STACK option, for example). Thanks, Attilio -- Peace can only be achieved by understanding - A. Einstein ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: startup options
On Fri, Aug 15, 2008 at 02:52:21PM -0700, Sam Leffler wrote: Stefan Sperling wrote: That page pretty much summarises the state of affairs, yes. Basically, you need a VIA-based ethernet card card (vr driver) and -CURRENT, or a vr card with 7.0 and patches from here: http://www.stsp.name/wol/FreeBSD-8-CURRENT-wol-backported-to-7.0/ All of those. Except the patch for pxe.c, that's there by accident. If you don't have a vr card, you will likely need to do some hacking. Follow the links from the wiki page for more information. trouble% cd sys/dev/ trouble% grep -l IFCAP_WOL */*.c age/if_age.c jme/if_jme.c re/if_re.c stge/if_stge.c vr/if_vr.c So 5 drivers right now support WOL. Jack said em had support a while back but he seems to have not hooked it up. Nice! I'll update the wiki page accordingly. What's with if_sis? Isn't it in yet because my patch only supports the NatSemi variant? (I have no idea whether the other variants work alike or not.) Stefan ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Extending the ddb command set
Guillaume Ballet wrote: Hello hackers, I am currently working on a small project and would like to add a few commands to the set that is available in ddb. I found that very interesting albeit succinct presentation: http://people.freebsd.org/~jhb/papers/bsdcan/2008/slides.odphttp://people.freebsd.org/%7Ejhb/papers/bsdcan/2008/slides.odp where the author hints that I should use DB_COMMAND, which I did. Yet when invoking ddb, the command does not appear in the help list. I have taken a look at the source code and was expecting set_db_cmd_set to appear in my module's section list when calling objdump -h Is DB_COMMAND only working within the kernel itself, and not modules? That is correct; you can't add ddb cmds from modules. It should be doable; just hasn't been done yet. Sam ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
local network throughput issues
Hello. I've been having some serious network throughput issues recently. Prior to these issues, I was running 7.0-STABLE from a few months back. I recently build a world/kernel from csup(1) on 2008-Jul-25 and started noticing the issues. I'm currently on a RELENG_7 from 2008-Aug-02 and am building another one today. The server is running samba, dnsmasq, an NFS server, and is the gateway for a couple of freebsd machines. I first noticed the issue when I was unable to play mp3s served over samba. I was getting a throughput of about 3 KBytes/sec over my gigabit switched network. After a few weeks of trying different versions of samba and watching tcpdump/trafshow, I decided to try another test: % ssh gateway cat /dev/zero | dd of=/dev/null load: 0.00 cmd: dd 68286 [runnable] 0.00u 0.00s 0% 844k 3680+0 records in 3680+0 records out 1884160 bytes transferred in 512.856684 secs (3674 bytes/sec) ^C3680+0 records in 3680+0 records out 1884160 bytes transferred in 513.392858 secs (3670 bytes/sec) Killed by signal 2. Again, not even 4 KB/s throughput over ssh. What's weird is that not all network traffic is slow. I'm able to download at almost my full DSL speed (7168 Kbps) and here's the strange bit: NFS is fast! From the same machine as above, I have an NFS mountpoint: % dd if=/nfs/some_large_file of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 0.147159 secs (194767476 bytes/sec) Which is what I would expect for a gigabit network. Even if I perform the same test over ssh: % ssh workstation cat /nfs/some_large_file | dd of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 2.791392 secs (10267909 bytes/sec) This is reasonable considering ssh overhead. The kernel config for the server contains: include GENERIC ident DDB options KDB options KDB_TRACE options DDB options DDB_NUMSYM My internal network is on 172.23.20.x and the DSL modem is connected to the same NIC on 192.168.0.1: # ifconfig nfe0 nfe0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=10bRXCSUM,TXCSUM,VLAN_MTU,TSO4 ether 00:15:f2:17:0c:20 inet 172.23.20.1 netmask 0xff00 broadcast 172.23.20.255 inet 192.168.0.3 netmask 0xff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseTX full-duplex,flag0,flag1) status: active # ipfw show 0010062968 8170100 allow ip from any to any via lo0 001100 0 deny ip from any to 127.0.0.0/8 001200 0 deny ip from 127.0.0.0/8 to any 00130 25444031 23419621364 divert 8668 ip from any to any via 192.168.0.3 001400 0 deny ip from not 172.23.20.0/24 to 172.23.20.0/24 dst-port 137-149,445 00150 20639141 15067620538 allow tcp from any to any established 00160 21 10683 allow ip from any to any frag 0017079791 4696696 allow tcp from any to any setup 65530 5713367 8864760207 allow ip from any to any 655350 0 deny ip from any to any Other than that, I'm not doing anything out of the ordinary. Why is NFS behaving correctly and why are ssh/smbd connections so slow? I've pasted my dmesg output below. I've used this configuration for years and it wasn't until a recent RELENG_7 upgrade that I've had any problems. The box was 99-100% idle during those tests and I don't see an interrupt storm or anything funny like that. Any ideas? -- Rick C. Petty From /var/run/dmesg.boot: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #5: Sat Aug 2 19:43:25 CDT 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DDB module_register: module sk/miibus already exists! Module sk/miibus failed to register: 17 module_register: module skc/sk already exists! Module skc/sk failed to register: 17 module_register: module pci/skc already exists! Module pci/skc failed to register: 17 module_register: module rl/miibus already exists! Module rl/miibus failed to register: 17 module_register: module cardbus/rl already exists! Module cardbus/rl failed to register: 17 module_register: module pci/rl already exists! Module pci/rl failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2211.34-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20f32 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow! AMD Features2=0x3LAHF,CMP Cores per package: 2 real memory = 1073676288 (1023 MB) avail memory = 1037037568 (988 MB) ACPI APIC Table: Nvidia AWRDACPI FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0
Re: local network throughput issues
On Sat, Aug 16, 2008 at 10:31:31PM +0200, [EMAIL PROTECTED] wrote: i immediatly think dns issues if samba and ssh are slow. are your hosts reverse lookup-able? Yes. DNS problems usually affect the time to connect, and those are fast. It's just the throughput I'm seeing a problem with. In fact in each sshd_config, I have: UseDNS no In dnsmasq, I have each host listed in /etc/hosts which is used by dnsmasq for forward and reverse DNS. No this problem started when I updated the OS on my gateway. -- Rick C. Petty ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Building custom kernel with new files
On Sat, 16 Aug 2008 10:33:09 pm you wrote: On Sat, Aug 16, 2008 at 10:10:02PM +1200, Ryan French wrote: Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? how do you build the kernel? adding to conf/files and conf/options should be sufficient... I build the file using make buildkernel KERNCONF=MPLSKERNEL while in the /usr/src/ directory. ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: local network throughput issues
On 8/16/08, Rick C. Petty [EMAIL PROTECTED] wrote: Hello. I've been having some serious network throughput issues recently. Prior to these issues, I was running 7.0-STABLE from a few months back. I recently build a world/kernel from csup(1) on 2008-Jul-25 and started noticing the issues. I'm currently on a RELENG_7 from 2008-Aug-02 and am building another one today. The server is running samba, dnsmasq, an NFS server, and is the gateway for a couple of freebsd machines. I first noticed the issue when I was unable to play mp3s served over samba. I was getting a throughput of about 3 KBytes/sec over my gigabit switched network. After a few weeks of trying different versions of samba and watching tcpdump/trafshow, I decided to try another test: % ssh gateway cat /dev/zero | dd of=/dev/null load: 0.00 cmd: dd 68286 [runnable] 0.00u 0.00s 0% 844k 3680+0 records in 3680+0 records out 1884160 bytes transferred in 512.856684 secs (3674 bytes/sec) ^C3680+0 records in 3680+0 records out 1884160 bytes transferred in 513.392858 secs (3670 bytes/sec) Killed by signal 2. Again, not even 4 KB/s throughput over ssh. What's weird is that not all network traffic is slow. I'm able to download at almost my full DSL speed (7168 Kbps) and here's the strange bit: NFS is fast! From the same machine as above, I have an NFS mountpoint: % dd if=/nfs/some_large_file of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 0.147159 secs (194767476 bytes/sec) Which is what I would expect for a gigabit network. Even if I perform the same test over ssh: % ssh workstation cat /nfs/some_large_file | dd of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 2.791392 secs (10267909 bytes/sec) This is reasonable considering ssh overhead. The kernel config for the server contains: include GENERIC ident DDB options KDB options KDB_TRACE options DDB options DDB_NUMSYM My internal network is on 172.23.20.x and the DSL modem is connected to the same NIC on 192.168.0.1: # ifconfig nfe0 nfe0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=10bRXCSUM,TXCSUM,VLAN_MTU,TSO4 ether 00:15:f2:17:0c:20 inet 172.23.20.1 netmask 0xff00 broadcast 172.23.20.255 inet 192.168.0.3 netmask 0xff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseTX full-duplex,flag0,flag1) status: active # ipfw show 0010062968 8170100 allow ip from any to any via lo0 001100 0 deny ip from any to 127.0.0.0/8 001200 0 deny ip from 127.0.0.0/8 to any 00130 25444031 23419621364 divert 8668 ip from any to any via 192.168.0.3 001400 0 deny ip from not 172.23.20.0/24 to 172.23.20.0/24 dst-port 137-149,445 00150 20639141 15067620538 allow tcp from any to any established 00160 21 10683 allow ip from any to any frag 0017079791 4696696 allow tcp from any to any setup 65530 5713367 8864760207 allow ip from any to any 655350 0 deny ip from any to any Other than that, I'm not doing anything out of the ordinary. Why is NFS behaving correctly and why are ssh/smbd connections so slow? I've pasted my dmesg output below. I've used this configuration for years and it wasn't until a recent RELENG_7 upgrade that I've had any problems. The box was 99-100% idle during those tests and I don't see an interrupt storm or anything funny like that. Any ideas? -- Rick C. Petty From /var/run/dmesg.boot: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #5: Sat Aug 2 19:43:25 CDT 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DDB module_register: module sk/miibus already exists! Module sk/miibus failed to register: 17 module_register: module skc/sk already exists! Module skc/sk failed to register: 17 module_register: module pci/skc already exists! Module pci/skc failed to register: 17 module_register: module rl/miibus already exists! Module rl/miibus failed to register: 17 module_register: module cardbus/rl already exists! Module cardbus/rl failed to register: 17 module_register: module pci/rl already exists! Module pci/rl failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2211.34-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20f32 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!
Re: Building custom kernel with new files
On Sat, 16 Aug 2008 10:38:24 pm you wrote: 2008/8/16, Ryan French [EMAIL PROTECTED]: Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? Ryan, can you please past the error message? More specifically, missing .o are about your newly included files or other? This can happen, for example, if the consumer of a subsystem wants to use it and the subsystem is not compiled (the stack(9) without STACK option, for example). Thanks, Attilio The missing .o is about my own files that I have included in the kernel. More specifically I have a file 'mpls.h' and as it is the first one in the directory as soon as it gets to linking the file I get the error ld: mpls.o: No such file: No such file or directory *** Error code 1 This occurs right after the command MAKE=make sh /usr/src/sys/conf/newvers.sh MPLSKERNEL Sorry I cant copy the whole error but I am running the development in a VM and I cant copy and paste between the VM and my host machine. ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Building custom kernel with new files
2008/8/16, Ryan French [EMAIL PROTECTED]: On Sat, 16 Aug 2008 10:38:24 pm you wrote: 2008/8/16, Ryan French [EMAIL PROTECTED]: Hi All, I am currently trying to build a custom kernel for my Google Summer of Code, and am running into a bit of a problem. I have all of my code compiling, but when I get to the linking stage as soon as it comes to the new files I have installed it says the *.o does not exist. I have added the files to /conf/files, and well as added the files to /conf/options and /conf/NOTES, and the option is set in my Makefile for the kernel. Is there another step I need to do before I can build the kernel? Ryan, can you please past the error message? More specifically, missing .o are about your newly included files or other? This can happen, for example, if the consumer of a subsystem wants to use it and the subsystem is not compiled (the stack(9) without STACK option, for example). Thanks, Attilio The missing .o is about my own files that I have included in the kernel. More specifically I have a file 'mpls.h' and as it is the first one in the directory as soon as it gets to linking the file I get the error ld: mpls.o: No such file: No such file or directory *** Error code 1 This occurs right after the command MAKE=make sh /usr/src/sys/conf/newvers.sh MPLSKERNEL Sorry I cant copy the whole error but I am running the development in a VM and I cant copy and paste between the VM and my host machine. Can you please paste your diff against src/sys/conf/files* ? Thanks, Attilio -- Peace can only be achieved by understanding - A. Einstein ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: local network throughput issues
On Sat, Aug 16, 2008 at 02:43:11PM -0500, Rick C. Petty wrote: Hello. I've been having some serious network throughput issues recently. Prior to these issues, I was running 7.0-STABLE from a few months back. I recently build a world/kernel from csup(1) on 2008-Jul-25 and started noticing the issues. I'm currently on a RELENG_7 from 2008-Aug-02 and am building another one today. The server is running samba, dnsmasq, an NFS server, and is the gateway for a couple of freebsd machines. I first noticed the issue when I was unable to play mp3s served over samba. I was getting a throughput of about 3 KBytes/sec over my gigabit switched network. After a few weeks of trying different versions of samba and watching tcpdump/trafshow, I decided to try another test: % ssh gateway cat /dev/zero | dd of=/dev/null load: 0.00 cmd: dd 68286 [runnable] 0.00u 0.00s 0% 844k 3680+0 records in 3680+0 records out 1884160 bytes transferred in 512.856684 secs (3674 bytes/sec) ^C3680+0 records in 3680+0 records out 1884160 bytes transferred in 513.392858 secs (3670 bytes/sec) Killed by signal 2. Again, not even 4 KB/s throughput over ssh. What's weird is that not all network traffic is slow. I'm able to download at almost my full DSL speed (7168 Kbps) and here's the strange bit: NFS is fast! From the same machine as above, I have an NFS mountpoint: % dd if=/nfs/some_large_file of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 0.147159 secs (194767476 bytes/sec) Which is what I would expect for a gigabit network. Even if I perform the same test over ssh: % ssh workstation cat /nfs/some_large_file | dd of=/dev/null 55980+0 records in 55980+0 records out 28661760 bytes transferred in 2.791392 secs (10267909 bytes/sec) This is reasonable considering ssh overhead. The kernel config for the server contains: include GENERIC ident DDB options KDB options KDB_TRACE options DDB options DDB_NUMSYM My internal network is on 172.23.20.x and the DSL modem is connected to the same NIC on 192.168.0.1: # ifconfig nfe0 nfe0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=10bRXCSUM,TXCSUM,VLAN_MTU,TSO4 ether 00:15:f2:17:0c:20 inet 172.23.20.1 netmask 0xff00 broadcast 172.23.20.255 inet 192.168.0.3 netmask 0xff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseTX full-duplex,flag0,flag1) status: active # ipfw show 0010062968 8170100 allow ip from any to any via lo0 001100 0 deny ip from any to 127.0.0.0/8 001200 0 deny ip from 127.0.0.0/8 to any 00130 25444031 23419621364 divert 8668 ip from any to any via 192.168.0.3 001400 0 deny ip from not 172.23.20.0/24 to 172.23.20.0/24 dst-port 137-149,445 00150 20639141 15067620538 allow tcp from any to any established 00160 21 10683 allow ip from any to any frag 0017079791 4696696 allow tcp from any to any setup 65530 5713367 8864760207 allow ip from any to any 655350 0 deny ip from any to any Other than that, I'm not doing anything out of the ordinary. Why is NFS behaving correctly and why are ssh/smbd connections so slow? I've pasted my dmesg output below. I've used this configuration for years and it wasn't until a recent RELENG_7 upgrade that I've had any problems. The box was 99-100% idle during those tests and I don't see an interrupt storm or anything funny like that. Any ideas? 1) Please provide netstat -in output. 2) NFS (unless you're explicitly disabling it) is UDP-based, while SSH and Samba are TCP-based. Your nfe0 device has TSO4 enabled on it, so I'm left wondering if the TCP offloading support for your nfe(4) device is broken. Can you try disabling it by adding -tso to your ifconfig_nfe0 line in /etc/rc.conf? If you're using DHCP on that interface, that may pose somewhat of a problem. 3) Can you disable the firewall (disable ipfw entirely) and see if the problem continues? -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: local network throughput issues
On Sat, Aug 16, 2008 at 03:15:35PM -0700, Jeremy Chadwick wrote: 1) Please provide netstat -in output. NameMtu Network Address Ipkts IerrsOpkts Oerrs Coll nfe0 1500 Link#1 00:15:f2:17:0c:20 14714298 0 14821857 0 0 nfe0 1500 172.23.20.0/2 172.23.20.12144815 - 12438012 - - nfe0 1500 192.168.0.0/2 192.168.0.39502416 - 2357751 - - lo0 16384 Link#2 31707 031707 0 0 lo0 16384 fe80:2::1/64 fe80:2::10 -0 - - lo0 16384 ::1/128 ::1 6 -6 - - lo0 16384 127.0.0.0/8 127.0.0.131588 -31588 - - tun11 1500 Link#3 985877 0 890589 0 0 tun11 1500 172.23.23.20/ 172.23.23.20714240 - 713237 - - tun0 1500 Link#4 22456 021872 0 0 tun0 1500 172.16.1.0/32 172.16.1.0 0 -0 - - 2) NFS (unless you're explicitly disabling it) is UDP-based, while SSH and Samba are TCP-based. Your nfe0 device has TSO4 enabled on it, so I'm left wondering if the TCP offloading support for your nfe(4) device is broken. Can you try disabling it by adding -tso to your ifconfig_nfe0 line in /etc/rc.conf? If you're using DHCP on that interface, that may pose somewhat of a problem. Yes, that seems to have made all the difference in the world: % ssh gateway cat /dev/zero | dd of=/dev/null load: 0.08 cmd: ssh 68698 [runnable] 1.20u 0.25s 11% 3020k 94384+0 records in 94384+0 records out 48324608 bytes transferred in 5.314707 secs (9092619 bytes/sec) load: 0.08 cmd: ssh 68698 [runnable] 1.81u 0.33s 15% 3020k 147664+0 records in 147664+0 records out 75603968 bytes transferred in 7.652768 secs (9879297 bytes/sec) So I'm thinking TSO wasn't an option in the older 7-stable I was running and now it is, but the support for it is broken. Your comment about DHCP, would that affect dhcpd or dhclient? This is my server machine so I don't run dhclient on it. I hardcode the IP connecting to the DSL modem. I'm currently hardcoding all the other machines also so I should be okay. 3) Can you disable the firewall (disable ipfw entirely) and see if the problem continues? Well the firewall is primarily for NAT and port forwarding. There's nothing special about it. It looks like the TSO disabling fixed my problems. Thank you for the suggestion! -- Rick C. Petty ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: local network throughput issues
On Sat, Aug 16, 2008 at 05:28:31PM -0500, Rick C. Petty wrote: 2) NFS (unless you're explicitly disabling it) is UDP-based, while SSH and Samba are TCP-based. Your nfe0 device has TSO4 enabled on it, so I'm left wondering if the TCP offloading support for your nfe(4) device is broken. Can you try disabling it by adding -tso to your ifconfig_nfe0 line in /etc/rc.conf? If you're using DHCP on that interface, that may pose somewhat of a problem. Yes, that seems to have made all the difference in the world: % ssh gateway cat /dev/zero | dd of=/dev/null load: 0.08 cmd: ssh 68698 [runnable] 1.20u 0.25s 11% 3020k 94384+0 records in 94384+0 records out 48324608 bytes transferred in 5.314707 secs (9092619 bytes/sec) load: 0.08 cmd: ssh 68698 [runnable] 1.81u 0.33s 15% 3020k 147664+0 records in 147664+0 records out 75603968 bytes transferred in 7.652768 secs (9879297 bytes/sec) So I'm thinking TSO wasn't an option in the older 7-stable I was running and now it is, but the support for it is broken. TSO support is something that's implemented in each network driver. TSO in nfe(4) was commited to HEAD (CURRENT) on June 12th 2007. See revision 1.17 below: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/nfe/if_nfe.c That would have been what is now considered RELENG_7 (since FreeBSD 7.0-RELEASE was announced and made available on February 27th, 2008). I'm under the impression that TSO was available/enabled for you before, but I'm not sure because there's not a lot of historic data available here. I don't know why/how it broke, or what has changed. I've CC'd one of the nfe(4) maintainers, PYUN Yong-Hyeon, who should be able to help determine what's going on. Yong-Hyeon, his dmesg output is available here, but you'll probably need more than that: http://lists.freebsd.org/pipermail/freebsd-hackers/2008-August/025706.html Your comment about DHCP, would that affect dhcpd or dhclient? This is my server machine so I don't run dhclient on it. I hardcode the IP connecting to the DSL modem. I'm currently hardcoding all the other machines also so I should be okay. My comment about DHCP is WRT to the FreeBSD box acting as a DHCP client (e.g. fetching an IP from your ISP). I believe dhclient (when getting a new IP) might override any interface options you set in rc.conf; purely speculative on my part, but I wanted to mention it in the case you didn't have a static IP configured in rc.conf. 3) Can you disable the firewall (disable ipfw entirely) and see if the problem continues? Well the firewall is primarily for NAT and port forwarding. There's nothing special about it. It looks like the TSO disabling fixed my problems. Thank you for the suggestion! No problem. -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]