i am being directed to this list for assistance.
the problem is an Olympus camera as follows:
(please Cc off list - i am not subscribed)
NO it is no in this line! Maybe its the same like the C-1, but the name
of it is D-150. So it gets detected by the next line of this file:
* Olympus digital cameras (D-370)
*/
{T_DIRECT, SIP_MEDIA_REMOVABLE, OLYMPUS, D-*, *},
/*quirks*/ DA_Q_NO_6_BYTE
And if you look closer you see that there's no DA_Q_NO_SYNC_CACHE.
Add it and try again.
ok - i have done as suggested as follows (before after dmesg):
(i don't not any difference - camera is plugged in at boot time)
===
usbdevs -v reports:
Controller /dev/usb0:
addr 1: self powered, config 1, OHCI root hub(0x),
OPTi(0x), rev 0x0100 port 1
addr 2: self powered, config 1, C-1 Digital Camera(0x0102),
Olympus(0x07b4), rev 0x1015 port 2 powered
usbd -d reports:
usbd:doing timeout discovery on /dev/usb0
usbd:processing event queue due to timeout on /dev/usb
/etc/usbd.conf:
device SmartMedia
devname /dev/da0s1
attach /sbin/mount -t msdos /dev/da0s1 /mnt
===
/usr/src/sys/dev/usb/umass.c:
if (UGETW(dd-idVendor) == USB_VENDOR_OLYMPUS) { /* */
/* UGETW(dd-idProduct) == USB_PRODUCT_OLYMPUS_C1) { */
/*
* The Olympus C-1 camera uses a different command-status
* signature.
*/
sc-quirks |= WRONG_CSWSIG;
}
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #5: Mon Mar 25 16:33:16 AKST 2002
[EMAIL PROTECTED]:/usr/src/sys/compile/MYKERN
Timecounter i8254 frequency 1193182 Hz
Timecounter TSC frequency 167045919 Hz
CPU: Pentium/P54C (167.05-MHz 586-class CPU)
Origin = GenuineIntel Id = 0x52c Stepping = 12
Features=0x1bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8
real memory = 33554432 (32768K bytes)
avail memory = 30072832 (29368K bytes)
Preloaded elf kernel kernel at 0xc02b6000.
Preloaded userconfig_script /boot/kernel.conf at 0xc02b609c.
Intel Pentium detected, installing workaround for F00F bug
Using $PIR table, 5 entries at 0xc00fdc70
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
isab0: Intel 82371FB PCI to ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel PIIX ATA controller port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: Cirrus Logic GD5446 SVGA controller at 17.0
ohci0: OPTi 82C861 (FireLink) USB controller mem 0xe100-0xe1000fff irq
10 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: OPTi 82C861 (FireLink) USB controller on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: OLYMPUS C-1Z,D-150Z, rev 1.10/10.15, addr 2, SCSI over Bulk-Only
umass0: Max Lun is 0
umass-sim:0:-1:-1:XPT_PATH_INQ:.
umass0:0:0:-1: Attached to scbus0 as device 0
umass0: Attach finished
orm0: Option ROM at iomem 0xc-0xc7fff on isa0
sc0: System console on isa0
sc0: VGA 9 virtual consoles, flags=0x200
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
atkbd0: AT Keyboard irq 1 on atkbdc0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
ed0 at port 0x340-0x35f irq 9 on isa0
ed0: address 00:00:1b:35:06:76, type NE2000 (16 bit)
fdc0: NEC 765 or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: 1440-KB 3.5 drive on fdc0 drive 0
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0
ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: PLIP network interface on ppbus0
lpt0: Printer on ppbus0
lpt0: Interrupt-driven port
ppi0: Parallel I/O on ppbus0
ad0: 4112MB WDC AC14300R [8912/15/63] at ata0-master WDMA2
acd0: CDROM FX3400S at ata0-slave using PIO4
umass-sim:0:-1:-1:XPT_PATH_INQ:.
umass-sim:0:-1:-1:XPT_PATH_INQ:.
umass-sim:0:-1:-1:XPT_PATH_INQ:.
umass0:0:0:0:XPT_PATH_INQ:.
umass0:0:0:0:XPT_PATH_INQ:.
umass-sim:0:1:0:func_code 0x0004: Invalid target (no wildcard)
umass-sim:0:2:0:func_code 0x0004: Invalid target (no wildcard)
umass0:0:0:0:XPT_SCSI_IO: cmd: 0x12, flags: 0x40, 6b cmd/36b data/18b sense
umass0: CBW 1: cmd = 6b (0x12002400), data = 36 bytes, dir = in
umass0: Handling BBB state 1 (BBB CBW), xfer=0xc07f1300, TIMEOUT
umass0: failed to send CBW
umass0: Bulk Reset
umass0: Handling BBB state 7 (BBB Reset), xfer=0xc07f7d80, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: Clear endpoint 0x82 stall
umass0: Handling BBB state 8 (BBB bulk-in