Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Steven Hartland wrote: Sounds like u have followed the install guide with the drivers. I couldn't get that to work ( without ACPI ) I had to install with ACPI but this was 5.4-RELEASE but using the 5.3 driver from highpoints site as there wasn't a 5.4 driver available. 1. Boot from cd 2. got to boot prompt, load the driver from floppy 3. unplug the floppy ( must to this as floppy under amd64 is broken ) 4. boot the kernel and install. Notes: 1. I was using a RAID 5 array 5 disks * 400Gb. 2. Create the array using 16 k stripe or the performance will be poor. - Original Message - From: Amandeep [EMAIL PROTECTED] I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone (023) 8024 3137 or return the E.mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED] Hi all, Ok, The 3ware and Highpoint works fine with 4GB of RAM. But I can hook another 4GB wiht 3ware and it works fine wiht 8GB but thats not the case for Highpoint. Highpoint dont work with installation of 4GB and then inserting 4GB. And it works fine wiht ACPi disables and floppy is present. Aman ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Steven Hartland wrote: Sounds like u have followed the install guide with the drivers. I couldn't get that to work ( without ACPI ) I had to install with ACPI but this was 5.4-RELEASE but using the 5.3 driver from highpoints site as there wasn't a 5.4 driver available. 1. Boot from cd 2. got to boot prompt, load the driver from floppy 3. unplug the floppy ( must to this as floppy under amd64 is broken ) 4. boot the kernel and install. Notes: 1. I was using a RAID 5 array 5 disks * 400Gb. 2. Create the array using 16 k stripe or the performance will be poor. - Original Message - From: Amandeep [EMAIL PROTECTED] I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone (023) 8024 3137 or return the E.mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED] Hi all, Ok, The 3ware and Highpoint works fine with 4GB of RAM. But I can hook another 4GB wiht 3ware and it works fine wiht 8GB but thats not the case for Highpoint. Highpoint dont work with installation of 4GB and then inserting 4GB. And it works fine wiht ACPi disables and floppy is present. Aman ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Hello, I think it's a question for the highpoint support. It's their product and their driver. Here are some instant hints: - read the PDF carefully and follow the instructions strictly - use the BIOS in the tarball; nothing else!! Regards Björn ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Hello, I think it's a question for the highpoint support. It's their product and their driver. Here are some instant hints: - read the PDF carefully and follow the instructions strictly - use the BIOS in the tarball; nothing else!! Regards Björn ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Hi guys, Anyone??? Amandeep wrote: Hi all, I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. Thanks in advance. A ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Hi guys, Anyone??? Amandeep wrote: Hi all, I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. Thanks in advance. A ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Sounds like u have followed the install guide with the drivers. I couldn't get that to work ( without ACPI ) I had to install with ACPI but this was 5.4-RELEASE but using the 5.3 driver from highpoints site as there wasn't a 5.4 driver available. 1. Boot from cd 2. got to boot prompt, load the driver from floppy 3. unplug the floppy ( must to this as floppy under amd64 is broken ) 4. boot the kernel and install. Notes: 1. I was using a RAID 5 array 5 disks * 400Gb. 2. Create the array using 16 k stripe or the performance will be poor. - Original Message - From: Amandeep [EMAIL PROTECTED] I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone (023) 8024 3137 or return the E.mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error installing FreeBSd 5.3 AMD 64 bit-Highpoint 1820A
Sounds like u have followed the install guide with the drivers. I couldn't get that to work ( without ACPI ) I had to install with ACPI but this was 5.4-RELEASE but using the 5.3 driver from highpoints site as there wasn't a 5.4 driver available. 1. Boot from cd 2. got to boot prompt, load the driver from floppy 3. unplug the floppy ( must to this as floppy under amd64 is broken ) 4. boot the kernel and install. Notes: 1. I was using a RAID 5 array 5 disks * 400Gb. 2. Create the array using 16 k stripe or the performance will be poor. - Original Message - From: Amandeep [EMAIL PROTECTED] I am instalaling FreeBSD 5.3 AMD 64 bit with 6- 200GB drives. Using Higpoint 1820A controller and doing RAID 10. I am using drivers for the card from Highpoint Web. The problem is when I make the partitions and the machine tries to format the partitions it says: unable to find device node for /dev/da0s1b under /dev! and then it comes out. Any ideas what is going on. Also tried making two slices no luck. This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone (023) 8024 3137 or return the E.mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
