Re: em driver: netif hangs the system if interface is cabled and configured but there is no link
On 06/12/2014 01:02 PM, Andreas Nilsson wrote: > If it is a dual port card, shouldn't it be em0 and em1 ? Yes. I do have two dual port cards however. -- John Jasen (jja...@gmail.com) ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
Re: em driver: netif hangs the system if interface is cabled and configured but there is no link
On Thu, Jun 12, 2014 at 6:11 PM, John Jasem wrote: > I'm configuring a system that's destined to be a multi-homed server, > using Intel dual port 1GbE cards that rely on the em driver. > > em0 has link, and only needed configuration. > > In an attempt to be ahead of the game, I pre-configured em2, plugged in > my side of the cable to be ready when the other side plugged theirs in, > and rebooted the box. > > In this state, it appears the box will hang as netif works through > interfaces defined in rc.conf. I'm not sure if permanently, but I'm > willing to call 20 minutes 'permanent' for the purposes of this exercise. > > I eventually was able to narrow it down to the configurations for em2, > and em2 not having link WHILE a cable was plugged in. I was able to > replicate the expected condition by unplugging the cable, and was able > to replicate the failure condition on em1 and em3 by moving the cable > and configurations. > > Any thoughts? Am I missing something? > > -- John Jasen (jja...@gmail.com) > > ___ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > If it is a dual port card, shouldn't it be em0 and em1 ? Best regards Andreas ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
em driver: netif hangs the system if interface is cabled and configured but there is no link
I'm configuring a system that's destined to be a multi-homed server, using Intel dual port 1GbE cards that rely on the em driver. em0 has link, and only needed configuration. In an attempt to be ahead of the game, I pre-configured em2, plugged in my side of the cable to be ready when the other side plugged theirs in, and rebooted the box. In this state, it appears the box will hang as netif works through interfaces defined in rc.conf. I'm not sure if permanently, but I'm willing to call 20 minutes 'permanent' for the purposes of this exercise. I eventually was able to narrow it down to the configurations for em2, and em2 not having link WHILE a cable was plugged in. I was able to replicate the expected condition by unplugging the cable, and was able to replicate the failure condition on em1 and em3 by moving the cable and configurations. Any thoughts? Am I missing something? -- John Jasen (jja...@gmail.com) ___ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"