RE: FreeBSD Port: smokeping-2.3.6_1
I think so. :-) The 2.4.1 stuff, seem to be very nice. Best regards, Jan Rockstedt Network Specialist IT Shared Service Center EMEA ASSA ABLOY Entrance Systems AB -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Thegler Sent: Monday, July 07, 2008 2:04 PM To: Rockstedt, Jan Cc: [EMAIL PROTECTED] Subject: Re: FreeBSD Port: smokeping-2.3.6_1 On Mon, Jul 7, 2008 at 1:29 PM, Rockstedt, Jan [EMAIL PROTECTED] wrote: Any new port version? Yeah, maybe it's time to look at the 2.4-stuff. I always wait a bit, the release quality is not always optimal. /Lars ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD Port: gnokii-0.6.26_1,1
Hi, I've just attempted to install Gnokii with smsd from ports on a FreeBSD 7.0 system, and I've encountered the following problems: 1) It appears that when SMSD is built, a dependency check for glib is missing. This causes the build of smsd to be disabled. 2) When the binaries are installed, they are installed with the prefix 'i386-portbld-freebsd7.0-', causing 'make install' to break when it tries to apply the appropriate ownership and permissions. As a side issue, is there any chance for a 'make config' to handle WITHOUT_X11, WITH_SMSD etc? This would make portupgrade (and others) significantly easier. Details are as follows: --- Built using: 'make -DWITHOUT_X11 -DWITH_SMSD install clean' Latest ports tree as of 1 hour prior to this email Gnokii port version: gnokii-0.6.26_1,1 make install breaks as such: chgrp: /usr/local/bin/gnokii: No such file or directory chgrp: /usr/local/sbin/gnokiid: No such file or directory chgrp: /usr/local/sbin/mgnokiidev: No such file or directory chmod: /usr/local/bin/gnokii: No such file or directory chmod: /usr/local/sbin/gnokiid: No such file or directory chmod: /usr/local/sbin/mgnokiidev: No such file or directory chmod: /usr/local/sbin/gnokiid: No such file or directory chmod: /usr/local/sbin/mgnokiidev: No such file or directory *** Error code 1 Stop in /usr/ports/comms/gnokii. Currently installed packages (ls -l /var/db/pkg): - drwxr-xr-x 2 root wheel 512 Jun 22 00:26 apache-2.2.8 drwxr-xr-x 2 root wheel 512 Jul 4 00:33 asterisk-1.4.20.1_1 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 autoconf-2.61_2 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 autoconf-wrapper-20071109 drwxr-xr-x 2 root wheel 512 Jul 4 00:20 bison-2.3_4,1 drwxr-xr-x 2 root wheel 512 Jun 21 23:26 cclient-2006j_1,1 drwxr-xr-x 2 root wheel 512 Jul 4 00:33 curl-7.18.0 drwxr-xr-x 2 root wheel 512 Jun 22 00:06 expat-2.0.1 drwxr-xr-x 2 root wheel 512 Jul 8 14:49 gettext-0.17_1 drwxr-xr-x 2 root wheel 512 Jul 8 15:11 glib-2.16.4 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 gmake-3.81_3 drwxr-xr-x 2 root wheel 512 Jul 4 00:33 gsm-1.0.12_1 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 help2man-1.36.4_2 drwxr-xr-x 2 root wheel 512 Jun 21 23:28 imap-uw-2006j_3,1 drwxr-xr-x 2 root wheel 512 Jun 23 10:24 libexecinfo-1.1_1 drwxr-xr-x 2 root wheel 512 Jul 8 14:49 libiconv-1.11_1 drwxr-xr-x 2 root wheel 512 Jun 23 14:30 libltdl-1.5.26 drwxr-xr-x 2 root wheel 512 Jun 23 14:30 libmcrypt-2.5.8 drwxr-xr-x 2 root wheel 512 Jul 4 00:21 libogg-1.1.3,4 drwxr-xr-x 2 root wheel 512 Jul 4 00:23 libslang2-2.1.3 drwxr-xr-x 2 root wheel 512 Jun 21 23:32 libtool-1.5.26 drwxr-xr-x 2 root wheel 512 Jul 4 00:33 libvorbis-1.2.0_2,3 drwxr-xr-x 2 root wheel 512 Jun 22 00:26 libxml2-2.6.32 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 m4-1.4.11,1 drwxr-xr-x 2 root wheel 512 Jun 23 14:31 mhash-0.9.9 drwxr-xr-x 2 root wheel 512 Jul 4 00:33 mpg123-0.59r_17 drwxr-xr-x 2 root wheel 512 Jun 21 23:42 mysql-client-5.0.51a drwxr-xr-x 2 root wheel 512 Jun 21 23:42 mysql-server-5.0.51a drwxr-xr-x 2 root wheel 512 Jul 4 00:33 newt-0.51.0_6 drwxr-xr-x 2 root wheel 512 Jul 8 11:39 p5-XML-Parser-2.36 drwxr-xr-x 2 root wheel 512 Jun 22 00:02 p5-gettext-1.05_2 drwxr-xr-x 2 root wheel 512 Jul 8 14:49 pcre-7.7 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 pecl-filter-0.11.0 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 pecl-hash-1.5 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 pecl-json-1.2.1 drwxr-xr-x 2 root wheel 512 Jul 8 14:49 perl-5.8.8_1 drwxr-xr-x 2 root wheel 512 Jun 23 14:25 php5-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-calendar-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-ctype-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-dom-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-extensions-1.1 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-iconv-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 24 08:16 php5-mbstring-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-mcrypt-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-mhash-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-mysql-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-mysqli-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-openssl-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:26 php5-pcre-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:33 php5-pdo-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-pdo_sqlite-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-posix-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-session-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:26 php5-simplexml-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:27 php5-spl-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-sqlite-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-tokenizer-5.2.6 drwxr-xr-x 2 root wheel 512 Jun 23 14:34 php5-xml-5.2.6
Re: IcedTea java virtual machine
anomeloris wrote: Is there any reason why the IcedTea isn't in ports? I haven't tried compiling it or anything, so are there any problems compiling it for freebsd? Ports are maintained by third-parties. Someone has to take it upon themselves to make a port and submit it, on their own initiative, if they want something in the ports collection. -- James Bailie [EMAIL PROTECTED] http://www.mammothcheese.ca ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
firefox 2.0.0.15?
Greetz, Are there any thoughts of updating www/firefox to 2.0.0.15? Some folks might not want to jump directly to 3.0 :-p Thanks. -- cheers mars ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
lang/fpc-utils, problem + solved
Hi there,
I've been having problems upgrading fpc-utils to its latest incarnation.
The error i was getting was not during build, but at install (either make
reinstall or make package), with the following error:
[...]
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/h2pas'
gmake -C fprcp all
gmake[1]: Entering directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fprcp'
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fprcp'
gmake -C dxegen all
gmake[1]: Entering directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/dxegen'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/dxegen'
gmake -C fpdoc all
gmake[1]: Entering directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fpdoc'
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fpdoc'
gmake -C fpcres all
gmake[1]: Entering directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fpcres'
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fpcres'
/usr/local/bin/ginstall -m 755 -d /usr/local/bin
/usr/local/bin/ginstall -c -m 755 ppdep ptop rstconv data2inc delp bin2obj
postw32 rmcvsdir /usr/local/bin
gmake -C fppkg install
gmake[1]: Entering directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fppkg'
/usr/local/bin/ginstall -m 755 -d /usr/local/bin
/usr/local/bin/ginstall -c -m 755 fppkg /usr/local/bin
/usr/local/bin/fpcmake -p -Ti386-freebsd Makefile.fpc
gmake[1]: /usr/local/bin/fpcmake: Command not found
gmake[1]: *** [fpc_install] Error 127
gmake[1]: Leaving directory
`/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fppkg'
gmake: *** [fppkg_install] Error 2
*** Error code 2
Stop in /usr/ports/lang/fpc-utils.
*** Error code 1
Stop in /usr/ports/lang/fpc-utils
How I fixed it :
1) build fpcmake by hand:
[EMAIL PROTECTED] [Tue Jul 8 18:54:30 2008]
/usr/ports/lang/fpc-utils/work/fpc-2.2.0/utils/fpcm
$ sudo gmake
[]
2) install fpcmake by hand BEFORE installing the package
sudo cp fpcmake /usr/local/bin/fpcmake
I hope this can be added to the port's install procedure itself.
cheers!!
B
_
{Beto|Norberto|Numard} Meijome
Hildebrant's Principle:
If you don't know where you are going,
any road will get you there.
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: please test sysutlis/apcupsd update
Hi, Ion-Mihai Tetcu wrote: On Tue, 01 Jul 2008 15:19:29 +0300 Stefan Lambrev [EMAIL PROTECTED] wrote: Greetings Ion-Mihai, Ion-Mihai Tetcu wrote: On Tue, 01 Jul 2008 13:38:49 +0300 Stefan Lambrev [EMAIL PROTECTED] wrote: [ .. ] === Patching for apcupsd-3.14.4 === Applying FreeBSD patches for apcupsd-3.14.4 Ignoring previously applied (or reversed) patch. 3 out of 3 hunks ignored--saving rejects to ./src/drivers/usb/bsd/bsd-usb.c.rej = Patch patch-src__drivers__usb__bsd__bsd-usb.c failed to apply cleanly. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade.54579.0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=apcupsd-3.14.3_1 UPGRADE_PORT_VER=3.14.3_1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! sysutils/apcupsd (apcupsd-3.14.3_1) (patch error) Can you please send me tar of your port? May be the diff is broken? That file was removed as it was integrated upstream; I did diff -u instead of diff -uN. Thanks for catching this. Try the one attached or just rm the file. Removing the old patch fix the compilation problem. The new version of apcups (usb) works fine with: ugen0: American Power Conversion Back-UPS CS 500 FW:808.q7.I USB FW:q7, class 0/0, rev 1.10/0.06, addr 2 on uhub0 I hope to find time to test and with Smart-UPS 3000 RM (serial) and network too. I just tested and can confirm that new port works fine with APC Smart-UPS 3000 RM I missed -N to cvs diff. The patch is no longer useful since it has been incorporated upstream. I uploaded the good patch: http://t32.tecnik93.com/FreeBSD/ports/apcupsd/port/apcupsd-3.14.3_2-to-3.14.4.diff Thanks, -- Best Wishes, Stefan Lambrev ICQ# 24134177 ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: www/rt2, www/rt3, www/rt32
On Jul 7, 2008, at 9:16 PM, Philip M. Gollucci wrote: 3) I would like to set EXPIRES=NOW()+3 months for www/rt2, www/rt3, www/rt32. Leaving www/rt34, www/rt36 where I should either fix the problem and/ or mark them IGNORE until I do. If this sounds good I'll send a PR in. +1 on the expires. is *anyone* still using them? I also think 3.4 should get the same treatment, given that 3.8 is about to be released. I'll approve any fix you post for 3.6. If you're up to taking over 3.6 (and presumably 3.8) I'll be glad to hand it over. I only took it on because it was languishing unmaintained for a while, but I'm way overloaded to give it the love it needs :-( ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
x11-toolkits/py-wxPython24 Broken 64bit Fix?????
Is a fix likely for: x11-toolkits/py-wxPython24: is marked as broken: Does not build on 64-bit architectures Thanks for the info David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
poscript display problems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm seeing some odd display problems, and I need to get somebody else to verify for me if it's a pan-FreeBSD problem, or if perhaps I have some oddity with my ghostcript installation. My problem is, on doc files from the Xorg project, *.PS.gz files (and not all of these, only the ones deriving directly from Framework .mif files) gv displays blank pages, and ps2pdf is converting to blank pages on pdfs. If you have a moment to do it, and would write me, I'd mail you one of these files, and see if you can view them yourself. If you can, I need to look harder. If you can't, then maybe we all need to (because one of the Xorg folks just told me they can read them fine using gv). I need some independent verification. -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhzsnUACgkQz62J6PPcoOnwZgCgmVuBDWVPk0ati4u0clyUrZUb ijAAn17ajDK/cpRCad4Wq/kln1zis/xk =C6hS -END PGP SIGNATURE- ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
Neon upgrade is fatally broken
The neon26 to neon28 upgrade is completely broken. There are multiple ports with explicit neon26 dependencies that cause enormous problems. There are also some sort of hidden problems that prevent things from working. For instance, gstreamer-plugins-neon has no explicit neon26 dependency, but the portupgrade still insists of finding a dependency somewhere. I have moved to neon28, but I cannot reinstall gstreamer-plugins-neon due to its instence that it install neon26, which conflicts with neon28. How do I fix this? /Joe ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: x11-toolkits/py-wxPython24 Broken 64bit Fix?????
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 David Southwell wrote: | Is a fix likely for: | | x11-toolkits/py-wxPython24: | is marked as broken: Does not build on 64-bit architectures | | Thanks for the info I have taken a look at this, it seems that this is not trivial work. Do you have problem using newer wxPython versions? Cheers, - -- Xin LI [EMAIL PROTECTED]http://www.delphij.net/ FreeBSD - The Power to Serve! -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAkhz6TQACgkQi+vbBBjt66BS4ACdF8xeCIWOV1oNAXa7DFSBpuXQ EnUAn1buwa/TtLxMX9PlpzjCjVLMn9AY =QaXZ -END PGP SIGNATURE- ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD Port: bind95-9.5.0
Hi Doug, Any chance of getting the new bind release which addresses the cache poisoning reference http://www.kb.cert.org/vuls/id/800113 I believe this is 9.5.0-P1 or 9.5.1b1? Thanks. Regards, Jason Jason Mainwaring Network Administrator AEC Systems Pty Ltd / AEC MicroCADD (AEC Systems Pty Ltd T/A in Victoria) SYDNEY - MELBOURNE - BRISBANE - PERTH - ADELAIDE - HOBART A.B.N: 64 075 153 025 Head Office: Lvl 1, 255-259 Pacific Highway, North Sydney NSW Australia 2060 Phone: 1300 368 609 Fax: 1300 362 140 Website: http://www.aecsystems.com.au http://www.aecsystems.com.au/ mailto:[EMAIL PROTECTED] Autodesk Systems Centre Accreditations * AutoCAD Autodesk Systems Centre (NSW, VIC, WA) * Building Solutions (ADT REVIT) Autodesk Systems Centre (NSW, VIC, WA) * Building Solutions (ABS) Autodesk Systems Centre (NSW, VIC, WA) * Infrastructure Solutions (Land,Civil Survey) Autodesk Systems Centre (NSW, WA) * Infrastructure Solutions (Map) Autodesk Systems Centre (NSW, VIC) * Infrastructure Solutions (Map MAPGuide) Autodesk Enterprise Partner (All States throughout Australia) **CONFIDENTIALITY AND PRIVILEGE NOTICE** This e-mail is intended only to be read or used by the addressee. It is confidential and may contain legal privileged information. If you are not the intended recipient, any use, distribution disclosure or copying of this e-mail or any attachment is strictly prohibited. Confidentiality and legal privilege attached to this communication are not waived or lost by reason of the mistaken delivery to you. If you have received this e-mail in error, please delete it and notify us immediately by telephone or e-mail. Whilst all care is taken in scanning all e-mails for viruses, neither AEC Systems Pty. Ltd. nor any employees thereof will be held in any way liable for the transmission of viruses. Please ensure your anti-virus software is up to date. ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to [EMAIL PROTECTED]
