FreeBSD ports you maintain which are out of date
Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/po...@freebsd.org.html Port| Current version | New version +-+ mail/proxsmtp | 1.8 | 1.10 +-+ net-mgmt/argus-monitor | 20100109| 20121202 +-+ science/linsmith| 0.99.22 | 0.99.24 +-+ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portsc...@portscout.freebsd.org Thanks. ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Impossible the burn DVD with the new FreeBSD 9.0 RELEASE?
Hi, I have a new installation of FreeBSD 9.0 RELEASE # uname -a FreeBSD delta.alpha.telemedellin.tv 9.0-RELEASE-p3 FreeBSD 9.0-RELEASE-p3 #0: Tue Jun 12 02:52:29 UTC 2012 r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 And the port # ls /var/db/pkg | grep cdrtools cdrtools-3.00_2 Searching for the SATA DVD # cdrecord -scanbus ... scsibus8: 8,0,0 800) 'HL-DT-ST' 'DVDRAM GH20NS15 ' 'IL00' Removable CD-ROM Create the .iso # mkisofs -R -J -udf -iso-level 3 -o /home/backups/Grabar/imagefile.iso /home/backups/Grabar/admindocimagenes-2012-11-28-00-00.tar.gz.aa Burn the DVD # cdrecord speed=8 dev=8,0,0 /home/backups/Grabar/ imagefile.iso cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Jörg Schilling scsidev: '8,0,0' scsibus: 8 target: 0 lun: 0 Using libscg version 'schily-0.9'. Device type: Removable CD-ROM Version: 0 Response Format: 2 Capabilities : Vendor_info: 'HL-DT-ST' Identifikation : 'DVDRAM GH20NS15 ' Revision : 'IL00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write0 seconds. Operation starts. Turning BURN-Free off cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 30 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 65536 cmd finished after 0.002s timeout 200s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. # dmesg (cd0:ahcich7:0:0:0): Command Specific Info: 0xc (cd0:ahcich7:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd0:ahcich7:0:0:0): CAM status: SCSI Status Error (cd0:ahcich7:0:0:0): SCSI status: Check Condition (cd0:ahcich7:0:0:0): SCSI sense: MEDIUM ERROR asc:10,90 (Vendor Specific ASCQ) # cat /usr/src/sys/amd64/conf/GENERIC | grep ATA # ATA controllers device ahci# AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers options ATA_CAM # Handle legacy controllers with CAM options ATA_STATIC_ID # Static device numbering device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis# SiliconImage SiI3124/SiI3132/SiI3531 SATA # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device pass# Passthrough device (direct ATA/SCSI access) device arcmsr # Areca SATA II RAID device twa # 3ware 9000 series PATA/SATA RAID device twe # 3ware ATA RAID device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller # cat /boot/loader.conf # The Z File System (ZFS) vm.kmem_size=512M vm.kmem_size_max=512M vfs.zfs.arc_max=40M vfs.zfs.vdev.cache.size=5M vfs.zfs.prefetch_disable=0 # NVIDIA Driver nvidia_load=YES # Intel HDA ALC889 audio codec snd_hda_load=YES - The old options in the Handbook for dvd+rw-tools not work http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-dvds.html # ls /var/db/pkg | grep dvd+rw-tools dvd+rw-tools-7.1 # cat /boot/loader.conf ... # Creating and Using Optical Media (DVDs) # The ATAPI/CAM Driver atapicam_load=YES # Enable DMA access for ATAPI devices hw.ata.atapi_dma=1 The error when i run the script: # /home/backups/Grabar/ BackupDVD-1.sh Grabando el DVD === Executing 'mkisofs -udf -iso-level 3 -V Backup 2012-11-29 -joliet-long -J -R /home/backups/Grabar/Admindoc/admindocimagenes-2012-11-28-00-00.tar.gz.aa | builtin_dd of=/dev/pass5 obs=32k seek=0' 0.22% done, estimate finish Thu Nov 29 16:56:17 2012 0.44% done, estimate finish Thu Nov 29 17:00:04 2012 0.66% done, estimate finish Thu Nov 29 16:58:48 2012 /dev/pass5: Current Write Speed is 8.2x1352KBps. :-( unable to WRITE@LBA=90h: Input/output error :-( write failed: Input/output error /dev/pass5: flushing cache /dev/pass5: updating RMA /dev/pass5: closing disc Proceso terminado, puede retirar el DVD ;-) Script content: # cat /home/backups/Grabar/BackupDVD-1.sh #! /bin/sh # Requiere: # # sysutils/dvd+rw-tools # # /sysutils/eject echo Grabando el DVD === growisofs -dvd-compat -udf -iso-level 3 -speed=8 -V Backup `date +%Y-%m-%d` -joliet-long -Z
freebsd-ports: CGI-Application-Plugin-DBH
Greetings! I use this port in my application software. (Along with a bunch of other stuff for perl5.) In preparation for FreeBSD-9.1, I installed the 9.1-RC3 snapshot, and attempted to rebuild all the supporting modules for my application software. I ran into difficulty with this port, or more specifically, this port, its dependencies and its interaction with the new 'pkg' command. I have a script that attempts to install all the ports for the various perl modules that are needed by my application, and this is the only port that failed to install. The dependencies for CGI-Application-Plugin-DBH list p5-CGI-modules, which conflicts with the regular old p5-CGI module, at least as reported by the new 'pkg' command. As far as I can see, the p5-CGI-modules port is a subset of the p5-CGI module, so if p5-CGI is already installed, then CGI-Application-Plugin-DBH is good to go. Could the dependencies for CGI-Application-Plugin-DBH be changed to be either p5-CGI-modules or p5-CGI? The particular error that gets punted out by p5-CGI-Modules is this: === Compressing manual pages for p5-CGI-modules-2.76^M === Registering installation for p5-CGI-modules-2.76 as automatic^M Installing p5-CGI-modules-2.76...pkg: p5-CGI-modules-2.76 conflicts with p5-CGI. pm-3.63,1 (installs files into the same place). Problematic file: /usr/local/li b/perl5/5.16.2/man/man3/CGI::Carp.3.gz^M *** [fake-pkg] Error code 70^M ^M Stop in /usr/ports/www/p5-CGI-modules.^M Thanks. -Kurt ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
port: CGI-Application-Dispatch
Greetings!
Can someone update this port to be based on the 3.12 release
of this module from CPAN, rather than the much older 3.07 release?
Also, it looks like the Makefile could be simplified to
have RUN_DEPENDS=${BUILD_DEPENDS} too.
-Kurt
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Fwd: FreeBSD ports you maintain which are out of date
-- Forwarded message -- From: Yanhui Shen shen@gmail.com Date: 2012/12/5 Subject: Re: FreeBSD ports you maintain which are out of date To: portsc...@portscout.freebsd.org Hi, According to this page http://basiccoder.com/openfetion The OpenFetion Project is deprecated, and therefore I do not want to maintain it any more. :-( Actually, there is a 2.2.1 port, but I think the software itself is buggy. The most annonying problem is, it'll be offline when shortmsg arrived. (100%) So, in my opinion what about just remove it from the ports tree? 2012/12/4 portsc...@portscout.freebsd.org: Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/shen@gmail.com.html Port| Current version | New version +-+ net-im/openfetion | 2.0.7 | 2.2.1 +-+ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portsc...@portscout.freebsd.org Thanks. -- Best regards, Yanhui Shen -- Best regards, Yanhui Shen ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
misc/xfce4-wm-themes - 'portmaster xfce' error
# portmaster xfce r directory tar: share/themes/Wallis/xfwm4/top-right-inactive.png: Cannot stat: No such file or directory tar: share/themes/Wallis/xfwm4/top-right-inactive.xpm: Cannot stat: No such file or directory tar: Error exit delayed from previous errors. pkg_create: make_dist: tar command failed with code 256 === Package creation failed for xfce4-wm-themes-4.10.0_1! === Ignore this error [i] === Abort update [a] === Retry [r] === How would you like to proceed? [i] I hit Enter here and portmaster finished the entire update cleanly # I verified the last error line as an example and it looks OK ... $ ls -al /usr/local/share/themes/Wallis/xfwm4/top-right-inactive.xpm -r--r--r-- 1 root wheel 516 Dec 4 21:39 /usr/local/share/themes/Wallis/xfwm4 /top-right-inactive.xpm $ less /var/db/pkg/xfce4-wm-themes-4.10.0_1/+CONTENTS ... share/themes/Wallis/xfwm4/top-right-inactive.xpm ... $ jb ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Re: freebsd-ports: CGI-Application-Plugin-DBH
Kurt, This port (p5-CGI) is very old and I not sure because it was repocopied to www/p5-CGI-modules. However I reviewed CGI-Application-Plugin-DBH port dependencies and maybe we can update it according to Makefile[1], which p5-CGI[-Modules] is not needed anymore. Could you test this patch[2] and give me a feedback ? [1] - http://cpansearch.perl.org/src/MARKSTOS/CGI-Application-Plugin-DBH-4.00/Makefile.PL [2] - http://people.freebsd.org/~lippe/logs/work/ports_www_p5-CGI-Application-Plugin-DBH.patch Thanks! lippe@ On Tue, Dec 4, 2012 at 3:38 PM, Kurt Lidl kurt.l...@cello.com wrote: Greetings! I use this port in my application software. (Along with a bunch of other stuff for perl5.) In preparation for FreeBSD-9.1, I installed the 9.1-RC3 snapshot, and attempted to rebuild all the supporting modules for my application software. I ran into difficulty with this port, or more specifically, this port, its dependencies and its interaction with the new 'pkg' command. I have a script that attempts to install all the ports for the various perl modules that are needed by my application, and this is the only port that failed to install. The dependencies for CGI-Application-Plugin-DBH list p5-CGI-modules, which conflicts with the regular old p5-CGI module, at least as reported by the new 'pkg' command. As far as I can see, the p5-CGI-modules port is a subset of the p5-CGI module, so if p5-CGI is already installed, then CGI-Application-Plugin-DBH is good to go. Could the dependencies for CGI-Application-Plugin-DBH be changed to be either p5-CGI-modules or p5-CGI? The particular error that gets punted out by p5-CGI-Modules is this: === Compressing manual pages for p5-CGI-modules-2.76^M === Registering installation for p5-CGI-modules-2.76 as automatic^M Installing p5-CGI-modules-2.76...pkg: p5-CGI-modules-2.76 conflicts with p5-CGI. pm-3.63,1 (installs files into the same place). Problematic file: /usr/local/li b/perl5/5.16.2/man/man3/CGI::Carp.3.gz^M *** [fake-pkg] Error code 70^M ^M Stop in /usr/ports/www/p5-CGI-modules.^M Thanks. -Kurt -- Att., Felippe de Meirelles Motta ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Re: Fwd: FreeBSD ports you maintain which are out of date
On Wed, Dec 05, 2012 at 01:59:49AM +0800, Yanhui Shen wrote: -- Forwarded message -- From: Yanhui Shen shen@gmail.com Date: 2012/12/5 Subject: Re: FreeBSD ports you maintain which are out of date To: portsc...@portscout.freebsd.org Hi, According to this page http://basiccoder.com/openfetion The OpenFetion Project is deprecated, and therefore I do not want to maintain it any more. :-( Actually, there is a 2.2.1 port, but I think the software itself is buggy. The most annonying problem is, it'll be offline when shortmsg arrived. (100%) So, in my opinion what about just remove it from the ports tree? I will set an expiration date of one month from now and remove the port then. Thanks for bringing this to our attention. -- WXS ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Re: Impossible the burn DVD with the new FreeBSD 9.0 RELEASE?
On Tue, Dec 04, 2012 at 12:04:07PM -0500, angelv wrote: Hi, I have a new installation of FreeBSD 9.0 RELEASE Make sure to compile these ports, i.e. actually all ports using libcam, yourself and don't use the official packages for 9.0. Unfortunately, there was an ABI breakage late in the release cycle but the affected packages have not been recompiled. Also, with 9.0 and later, you must not use atapicam(4) (unless you throw out options ATA_CAM from your kernel). Otherwise I've no idea why there should be a regression at the ports level if things worked before. Marius ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
Re: Impossible the burn DVD with the new FreeBSD 9.0 RELEASE?
On Tue, 4 Dec 2012, angelv wrote: # cat /home/backups/Grabar/BackupDVD-1.sh #! /bin/sh # Requiere: # # sysutils/dvd+rw-tools # # /sysutils/eject echo Grabando el DVD === growisofs -dvd-compat -udf -iso-level 3 -speed=8 -V Backup `date +%Y-%m-%d` -joliet-long -Z /dev/cd0 -J -R \ /home/backups/Grabar/Admindoc/*.tar.gz.aa echo Proceso terminado, puede retirar el DVD ;-) echo eject /dev/cd0$ I use growisofs with DVD-R or +R in a script like this: growisofs -Z /dev/cd0 -speed=16 -J -joliet-long -r -V dvdtitle $* -udf may be for -RW media, which I don't use. ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
