Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-08 Thread Danny Braniss 
> Danny Braniss wrote:
> > [...]
> >   
>  ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
>  longer available, there is a
>  ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
>  then again in ports/emulatores/virtualbox the version is 3.0.51r6,
> 
>  can someone please explain?
>  
> >
> > hi, the above was my question, which was totally ignored, not nice.
> > I will try and refrase it:
> > the call for testing is for a version (2.2.51r20457) which is not 
> > available, while
> > the ports is 3.0.51r6, so while I managed to compile it, it complains 
> > that COM
> > is not running, all this under 8BETA-3, both under 32 and 64 bit.
> > thnaks,
> > danny
> >
> >   
> The call for testing went out on 11th june
> (http://lists.freebsd.org/pipermail/freebsd-current/2009-June/008061.html)  
> I can only assume it was considered tested and working as the port was
> committed on 15th june
> (http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/virtualbox/Makefile?rev=1.1;content-type=text%2Fplain)
> 
> Since then there have been 4 updates to the port. The last of which
> updated it to 3.0.51r6 on august 14th.
> 
> I would say the call for testing is no longer valid, please use the
> version in ports.

thank you, and all those involved!
danny


___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-08 Thread Vincent Hoffman 
Danny Braniss wrote:
> [...]
>   
 ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
 longer available, there is a
 ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
 then again in ports/emulatores/virtualbox the version is 3.0.51r6,

 can someone please explain?
 
>
> hi, the above was my question, which was totally ignored, not nice.
> I will try and refrase it:
> the call for testing is for a version (2.2.51r20457) which is not available, 
> while
> the ports is 3.0.51r6, so while I managed to compile it, it complains 
> that COM
> is not running, all this under 8BETA-3, both under 32 and 64 bit.
> thnaks,
>   danny
>
>   
The call for testing went out on 11th june
(http://lists.freebsd.org/pipermail/freebsd-current/2009-June/008061.html)  
I can only assume it was considered tested and working as the port was
committed on 15th june
(http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/virtualbox/Makefile?rev=1.1;content-type=text%2Fplain)

Since then there have been 4 updates to the port. The last of which
updated it to 3.0.51r6 on august 14th.

I would say the call for testing is no longer valid, please use the
version in ports.


Vince

> ___
> freebsd-curr...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
>   

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-07 Thread Bernhard Fröhlich 
On Mon, September 7, 2009 7:48 pm, Olivier Smedts wrote:
> 2009/9/7 Bernhard Fröhlich :
>> On Mon, September 7, 2009 7:41 am, Danny Braniss wrote:
>>>
>>> [...]
 > > >
 > > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is
 no
 > > longer available, there is a
 > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
 > > then again in ports/emulatores/virtualbox the version is
 3.0.51r6,
 > >
 > > can someone please explain?
>>>
>>> hi, the above was my question, which was totally ignored, not nice.
>>> I will try and refrase it:
>>> the call for testing is for a version (2.2.51r20457) which is not
>>> available, while
>>> the ports is 3.0.51r6, so while I managed to compile it, it
>>> complains
>>> that COM
>>> is not running, all this under 8BETA-3, both under 32 and 64 bit.
>>
>> I'll try to be nice but it is still unclear to me what you want. The
>> file
>> is available on all 4 master sites that are listed in the ports
>> Makefile.
>>
>> The virtualbox port is still in heavy development so it is strongly
>> recommended that you use the latest version that is in the ports. If
>> that
>> also does not work you could give our svn version a try but be careful
>> with it because it can break in strange ways or destroy your virtual
>> machines.
>>
>> svn co
>> http://svn.bluelife.at/projects/packages/blueports/emulators/virtualbox/
>
> Wow... the SVN version works great for me with VT extensions ! I just
> tried a 64 bits 2 processors guest :)
>
> Thanks !

According to Alexander Eichner VT-x should work now with the latest vbox
code. So everybody who is using our svn port should already have working
VT-x. We plan to update the virtualbox port in the next few days to get
that version in the tree before the ports freeze.

-- 
Bernhard Fröhlich
http://www.bluelife.at/

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-07 Thread Odhiambo Washington 
On Mon, Sep 7, 2009 at 7:45 PM, CmdLnKid  wrote:

> On Sun, 6 Sep 2009 14:50 -, odhiambo wrote:
>
>  On Sun, Sep 6, 2009 at 7:25 PM, Martin Wilke  wrote:
>>
>>  -BEGIN PGP SIGNED MESSAGE-
>>> Hash: SHA1
>>>
>>> On Sun, Sep 06, 2009 at 06:11:48PM +0300, Odhiambo Washington wrote:
>>>
 On Sun, Sep 6, 2009 at 1:40 PM, Danny Braniss 

>>> wrote:
>>>

  -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Huhu,
>>
>> Yes we life and that's good :-).
>> Changes:
>>
>>  - Fix build error when compiling in debug mode on FreeBSD HEAD
>>  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite
>>
> timeout.
>>>
   - Some FreeBSD relate typos
>>  - Enable shared OpenGL service. Completely untested due to lack of
>>appropriate hardware but it compiles at least
>>  - Add support for shared clipboards. Requires libXt
>>  - FreeBSD: Implement preemption API for guest SMP and enable
>>it (slightly tested). Add neccessary RTMP* methods in userspace
>>for the frontends to detect the number of CPUs
>>  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
>>instead of a spinlock to fix the problems users are seeing
>>(assertions with debugging enabled) while still being able
>>to run on 100Hz hosts. No problems detected so far and Solaris
>>doesn't use a spin mutex in this code too so it shouldn't do
>>any harm (keeping fingers crossed)space for the frontends to
>>detect the number of CPUs
>>  - Add support for curl
>>  - Add VBoxSharedClipboard
>>
>> Ports Changes;
>>  - Force guestadditions version to 2.2.4
>>  - Removed Qt3 include replacements (already upstream)
>>  - Removed cosmetic X11 include path patch
>>
>> Please make SURE, your world and kernel is in sync and you've read
>> the pkg-messages. Also please unload the kernel module before
>> you update the port ;-).
>>
>> Many thx to all Vbox Devs, All supporters, my nice team! :-)
>>
>>   
>> http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
>> 
>>
> 
>>>

>>  Happy Testing!
>>
>>  ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
> longer available, there is a
>
>
>>> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
>>>
 then again in ports/emulatores/virtualbox the version is 3.0.51r6,
>
> can someone please explain?
>
>
>

 And on my FreeBSD 7.2-STABLE, compiling virtualbox fails as follows:



 kBuild: Linking VBoxREM64
 kBuild: Installing VBoxREM64 =>

 /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBox
>>>
 REM64.so
 kmk[2]: Leaving directory
 `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
 kmk[1]: Leaving directory
 `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
 kBuild: Pass - Programs
 kmk[1]: Entering directory
 `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
 kmk[2]: Entering directory
 `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
 kBuild: Compiling tstAPI -

 /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/src/VBox/Main/testcase/tstAPI.cpp
>>>
 kBuild: Linking tstAPI
 /usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
 /usr/local/lib/libssl.so.5: undefined reference to
 `ENGINE_get_ssl_client_cert_function'
 /usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
 /usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
 /usr/local/lib/libssl.so.5: undefined reference to
 `ENGINE_load_ssl_client_cert'
 /usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
 /usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
 kmk[2]: ***

 [/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/obj/tstAPI/tstAPI]
>>>
 Error 1
 The failing command:
 @g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
 /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r
 6/out/freebsd.x86/release/obj/tstAPI/tstAPI

 /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/
>>>
 release/obj/tstAPI/tstAPI.o   -L/usr/lib  -L/usr/X11R6/lib
 -L/usr/local/lib
 /usr/ports/emulators/virtualbox/work/virtualbo
 x-3.0.51r6/out/freebsd.x86/release/bin/VBoxRT.so
 /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freeb
 sd.x86/release/lib/VBoxCOM.a

 /usr/ports/emulators/virtualbox/work/virtualbox-

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-07 Thread Olivier Smedts 
2009/9/7 Bernhard Fröhlich :
> On Mon, September 7, 2009 7:41 am, Danny Braniss wrote:
>>
>> [...]
>>> > > >
>>> > > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is
>>> no
>>> > > longer available, there is a
>>> > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
>>> > > then again in ports/emulatores/virtualbox the version is
>>> 3.0.51r6,
>>> > >
>>> > > can someone please explain?
>>
>> hi, the above was my question, which was totally ignored, not nice.
>> I will try and refrase it:
>> the call for testing is for a version (2.2.51r20457) which is not
>> available, while
>> the ports is 3.0.51r6, so while I managed to compile it, it complains
>> that COM
>> is not running, all this under 8BETA-3, both under 32 and 64 bit.
>
> I'll try to be nice but it is still unclear to me what you want. The file
> is available on all 4 master sites that are listed in the ports Makefile.
>
> The virtualbox port is still in heavy development so it is strongly
> recommended that you use the latest version that is in the ports. If that
> also does not work you could give our svn version a try but be careful
> with it because it can break in strange ways or destroy your virtual
> machines.
>
> svn co
> http://svn.bluelife.at/projects/packages/blueports/emulators/virtualbox/

Wow... the SVN version works great for me with VT extensions ! I just
tried a 64 bits 2 processors guest :)

Thanks !

>
> --
> Bernhard Fröhlich
> http://www.bluelife.at/
>
> ___
> freebsd-ports@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
>



-- 
Olivier Smedts _
ASCII ribbon campaign ( )
e-mail: oliv...@gid0.org- against HTML email & vCards  X
www: http://www.gid0.org- against proprietary attachments / \

  "Il y a seulement 10 sortes de gens dans le monde :
  ceux qui comprennent le binaire,
  et ceux qui ne le comprennent pas."
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-07 Thread CmdLnKid 

On Sun, 6 Sep 2009 14:50 -, odhiambo wrote:


On Sun, Sep 6, 2009 at 7:25 PM, Martin Wilke  wrote:


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On Sun, Sep 06, 2009 at 06:11:48PM +0300, Odhiambo Washington wrote:

On Sun, Sep 6, 2009 at 1:40 PM, Danny Braniss 

wrote:



-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Huhu,

Yes we life and that's good :-).
Changes:

  - Fix build error when compiling in debug mode on FreeBSD HEAD
  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite

timeout.

  - Some FreeBSD relate typos
  - Enable shared OpenGL service. Completely untested due to lack of
appropriate hardware but it compiles at least
  - Add support for shared clipboards. Requires libXt
  - FreeBSD: Implement preemption API for guest SMP and enable
it (slightly tested). Add neccessary RTMP* methods in userspace
for the frontends to detect the number of CPUs
  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
instead of a spinlock to fix the problems users are seeing
(assertions with debugging enabled) while still being able
to run on 100Hz hosts. No problems detected so far and Solaris
doesn't use a spin mutex in this code too so it shouldn't do
any harm (keeping fingers crossed)space for the frontends to
detect the number of CPUs
  - Add support for curl
  - Add VBoxSharedClipboard

Ports Changes;
  - Force guestadditions version to 2.2.4
  - Removed Qt3 include replacements (already upstream)
  - Removed cosmetic X11 include path patch

Please make SURE, your world and kernel is in sync and you've read
the pkg-messages. Also please unload the kernel module before
you update the port ;-).

Many thx to all Vbox Devs, All supporters, my nice team! :-)

   
http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz




 Happy Testing!


ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
longer available, there is a


ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2

then again in ports/emulatores/virtualbox the version is 3.0.51r6,

can someone please explain?





And on my FreeBSD 7.2-STABLE, compiling virtualbox fails as follows:



kBuild: Linking VBoxREM64
kBuild: Installing VBoxREM64 =>


/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBox

REM64.so
kmk[2]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[1]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kBuild: Pass - Programs
kmk[1]: Entering directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[2]: Entering directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kBuild: Compiling tstAPI -


/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/src/VBox/Main/testcase/tstAPI.cpp

kBuild: Linking tstAPI
/usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_get_ssl_client_cert_function'
/usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
/usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_load_ssl_client_cert'
/usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
/usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
kmk[2]: ***


[/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/obj/tstAPI/tstAPI]

Error 1
The failing command:
@g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r
6/out/freebsd.x86/release/obj/tstAPI/tstAPI


/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/

release/obj/tstAPI/tstAPI.o   -L/usr/lib  -L/usr/X11R6/lib
-L/usr/local/lib
/usr/ports/emulators/virtualbox/work/virtualbo
x-3.0.51r6/out/freebsd.x86/release/bin/VBoxRT.so
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freeb
sd.x86/release/lib/VBoxCOM.a


/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBoxX

PCOM.so
kmk[2]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[1]: *** [pass_binaries_this] Error 2
kmk[1]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk: *** [pass_binaries_order] Error 2
*** Error code 2

Stop in /usr/ports/emulators/virtualbox.


I hope someone can advise on what is needed.



deinstall openssl from ports and try again :)



I remember we had this suggestion before, and either you (or someone else)
was going to look into the use of openssl from the ports:-)
Looks like I will have to recompile most apps that have linked against
openssl, no?



Just create a backup package of your openssl port with ( pkg_create

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-07 Thread Bernhard Fröhlich 
On Mon, September 7, 2009 7:41 am, Danny Braniss wrote:
>
> [...]
>> > > >
>> > > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is
>> no
>> > > longer available, there is a
>> > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
>> > > then again in ports/emulatores/virtualbox the version is
>> 3.0.51r6,
>> > >
>> > > can someone please explain?
>
> hi, the above was my question, which was totally ignored, not nice.
> I will try and refrase it:
> the call for testing is for a version (2.2.51r20457) which is not
> available, while
> the ports is 3.0.51r6, so while I managed to compile it, it complains
> that COM
> is not running, all this under 8BETA-3, both under 32 and 64 bit.

I'll try to be nice but it is still unclear to me what you want. The file
is available on all 4 master sites that are listed in the ports Makefile.

The virtualbox port is still in heavy development so it is strongly
recommended that you use the latest version that is in the ports. If that
also does not work you could give our svn version a try but be careful
with it because it can break in strange ways or destroy your virtual
machines.

svn co
http://svn.bluelife.at/projects/packages/blueports/emulators/virtualbox/

-- 
Bernhard Fröhlich
http://www.bluelife.at/

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-06 Thread Danny Braniss 

[...]
> > > >
> > > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
> > > longer available, there is a
> > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
> > > then again in ports/emulatores/virtualbox the version is 3.0.51r6,
> > >
> > > can someone please explain?

hi, the above was my question, which was totally ignored, not nice.
I will try and refrase it:
the call for testing is for a version (2.2.51r20457) which is not available, 
while
the ports is 3.0.51r6, so while I managed to compile it, it complains that 
COM
is not running, all this under 8BETA-3, both under 32 and 64 bit.
thnaks,
danny


___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-06 Thread Odhiambo Washington 
On Sun, Sep 6, 2009 at 7:25 PM, Martin Wilke  wrote:

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Sun, Sep 06, 2009 at 06:11:48PM +0300, Odhiambo Washington wrote:
> > On Sun, Sep 6, 2009 at 1:40 PM, Danny Braniss 
> wrote:
> >
> > > > -BEGIN PGP SIGNED MESSAGE-
> > > > Hash: SHA1
> > > >
> > > > Huhu,
> > > >
> > > > Yes we life and that's good :-).
> > > > Changes:
> > > >
> > > >   - Fix build error when compiling in debug mode on FreeBSD HEAD
> > > >   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite
> timeout.
> > > >   - Some FreeBSD relate typos
> > > >   - Enable shared OpenGL service. Completely untested due to lack of
> > > > appropriate hardware but it compiles at least
> > > >   - Add support for shared clipboards. Requires libXt
> > > >   - FreeBSD: Implement preemption API for guest SMP and enable
> > > > it (slightly tested). Add neccessary RTMP* methods in userspace
> > > > for the frontends to detect the number of CPUs
> > > >   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> > > > instead of a spinlock to fix the problems users are seeing
> > > > (assertions with debugging enabled) while still being able
> > > > to run on 100Hz hosts. No problems detected so far and Solaris
> > > > doesn't use a spin mutex in this code too so it shouldn't do
> > > > any harm (keeping fingers crossed)space for the frontends to
> > > > detect the number of CPUs
> > > >   - Add support for curl
> > > >   - Add VBoxSharedClipboard
> > > >
> > > > Ports Changes;
> > > >   - Force guestadditions version to 2.2.4
> > > >   - Removed Qt3 include replacements (already upstream)
> > > >   - Removed cosmetic X11 include path patch
> > > >
> > > > Please make SURE, your world and kernel is in sync and you've read
> > > > the pkg-messages. Also please unload the kernel module before
> > > > you update the port ;-).
> > > >
> > > > Many thx to all Vbox Devs, All supporters, my nice team! :-)
> > > >
> > > >
> > > > http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> 
> > > >
> > > >  Happy Testing!
> > > >
> > > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
> > > longer available, there is a
> > >
> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
> > > then again in ports/emulatores/virtualbox the version is 3.0.51r6,
> > >
> > > can someone please explain?
> > >
> > >
> >
> >
> > And on my FreeBSD 7.2-STABLE, compiling virtualbox fails as follows:
> >
> >
> >
> > kBuild: Linking VBoxREM64
> > kBuild: Installing VBoxREM64 =>
> >
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBox
> > REM64.so
> > kmk[2]: Leaving directory
> > `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> > kmk[1]: Leaving directory
> > `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> > kBuild: Pass - Programs
> > kmk[1]: Entering directory
> > `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> > kmk[2]: Entering directory
> > `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> > kBuild: Compiling tstAPI -
> >
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/src/VBox/Main/testcase/tstAPI.cpp
> > kBuild: Linking tstAPI
> > /usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
> > /usr/local/lib/libssl.so.5: undefined reference to
> > `ENGINE_get_ssl_client_cert_function'
> > /usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
> > /usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
> > /usr/local/lib/libssl.so.5: undefined reference to
> > `ENGINE_load_ssl_client_cert'
> > /usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
> > /usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
> > kmk[2]: ***
> >
> [/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/obj/tstAPI/tstAPI]
> > Error 1
> > The failing command:
> > @g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
> > /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r
> > 6/out/freebsd.x86/release/obj/tstAPI/tstAPI
> >
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/
> > release/obj/tstAPI/tstAPI.o   -L/usr/lib  -L/usr/X11R6/lib
> > -L/usr/local/lib
> > /usr/ports/emulators/virtualbox/work/virtualbo
> > x-3.0.51r6/out/freebsd.x86/release/bin/VBoxRT.so
> > /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freeb
> > sd.x86/release/lib/VBoxCOM.a
> >
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBoxX
> > PCOM.so
> > kmk[2]: Leaving directory
> > `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> > kmk[1]: *** [pass_binaries_this] Error 2
> > kmk[1]: Leaving directory
> > `/usr/ports/em

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-06 Thread Martin Wilke 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On Sun, Sep 06, 2009 at 06:11:48PM +0300, Odhiambo Washington wrote:
> On Sun, Sep 6, 2009 at 1:40 PM, Danny Braniss  wrote:
> 
> > > -BEGIN PGP SIGNED MESSAGE-
> > > Hash: SHA1
> > >
> > > Huhu,
> > >
> > > Yes we life and that's good :-).
> > > Changes:
> > >
> > >   - Fix build error when compiling in debug mode on FreeBSD HEAD
> > >   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
> > >   - Some FreeBSD relate typos
> > >   - Enable shared OpenGL service. Completely untested due to lack of
> > > appropriate hardware but it compiles at least
> > >   - Add support for shared clipboards. Requires libXt
> > >   - FreeBSD: Implement preemption API for guest SMP and enable
> > > it (slightly tested). Add neccessary RTMP* methods in userspace
> > > for the frontends to detect the number of CPUs
> > >   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> > > instead of a spinlock to fix the problems users are seeing
> > > (assertions with debugging enabled) while still being able
> > > to run on 100Hz hosts. No problems detected so far and Solaris
> > > doesn't use a spin mutex in this code too so it shouldn't do
> > > any harm (keeping fingers crossed)space for the frontends to
> > > detect the number of CPUs
> > >   - Add support for curl
> > >   - Add VBoxSharedClipboard
> > >
> > > Ports Changes;
> > >   - Force guestadditions version to 2.2.4
> > >   - Removed Qt3 include replacements (already upstream)
> > >   - Removed cosmetic X11 include path patch
> > >
> > > Please make SURE, your world and kernel is in sync and you've read
> > > the pkg-messages. Also please unload the kernel module before
> > > you update the port ;-).
> > >
> > > Many thx to all Vbox Devs, All supporters, my nice team! :-)
> > >
> > >
> > > http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> > >
> > >  Happy Testing!
> > >
> > ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
> > longer available, there is a
> > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
> > then again in ports/emulatores/virtualbox the version is 3.0.51r6,
> >
> > can someone please explain?
> >
> >
> 
> 
> And on my FreeBSD 7.2-STABLE, compiling virtualbox fails as follows:
> 
> 
> 
> kBuild: Linking VBoxREM64
> kBuild: Installing VBoxREM64 =>
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBox
> REM64.so
> kmk[2]: Leaving directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kmk[1]: Leaving directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kBuild: Pass - Programs
> kmk[1]: Entering directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kmk[2]: Entering directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kBuild: Compiling tstAPI -
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/src/VBox/Main/testcase/tstAPI.cpp
> kBuild: Linking tstAPI
> /usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
> /usr/local/lib/libssl.so.5: undefined reference to
> `ENGINE_get_ssl_client_cert_function'
> /usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
> /usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
> /usr/local/lib/libssl.so.5: undefined reference to
> `ENGINE_load_ssl_client_cert'
> /usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
> /usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
> kmk[2]: ***
> [/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/obj/tstAPI/tstAPI]
> Error 1
> The failing command:
> @g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r
> 6/out/freebsd.x86/release/obj/tstAPI/tstAPI
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/
> release/obj/tstAPI/tstAPI.o   -L/usr/lib  -L/usr/X11R6/lib
> -L/usr/local/lib
> /usr/ports/emulators/virtualbox/work/virtualbo
> x-3.0.51r6/out/freebsd.x86/release/bin/VBoxRT.so
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freeb
> sd.x86/release/lib/VBoxCOM.a
> /usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBoxX
> PCOM.so
> kmk[2]: Leaving directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kmk[1]: *** [pass_binaries_this] Error 2
> kmk[1]: Leaving directory
> `/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
> kmk: *** [pass_binaries_order] Error 2
> *** Error code 2
> 
> Stop in /usr/ports/emulators/virtualbox.
> 
> 
> I hope someone can advise on what is needed.
> 

deinstall openssl from ports and try again :)

> 
> -- 
> Best regards,
> Odhiambo WASHINGTON,
> Nairobi,KE
> +254733744121/+2547

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-06 Thread Odhiambo Washington 
On Sun, Sep 6, 2009 at 1:40 PM, Danny Braniss  wrote:

> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > Huhu,
> >
> > Yes we life and that's good :-).
> > Changes:
> >
> >   - Fix build error when compiling in debug mode on FreeBSD HEAD
> >   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
> >   - Some FreeBSD relate typos
> >   - Enable shared OpenGL service. Completely untested due to lack of
> > appropriate hardware but it compiles at least
> >   - Add support for shared clipboards. Requires libXt
> >   - FreeBSD: Implement preemption API for guest SMP and enable
> > it (slightly tested). Add neccessary RTMP* methods in userspace
> > for the frontends to detect the number of CPUs
> >   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> > instead of a spinlock to fix the problems users are seeing
> > (assertions with debugging enabled) while still being able
> > to run on 100Hz hosts. No problems detected so far and Solaris
> > doesn't use a spin mutex in this code too so it shouldn't do
> > any harm (keeping fingers crossed)space for the frontends to
> > detect the number of CPUs
> >   - Add support for curl
> >   - Add VBoxSharedClipboard
> >
> > Ports Changes;
> >   - Force guestadditions version to 2.2.4
> >   - Removed Qt3 include replacements (already upstream)
> >   - Removed cosmetic X11 include path patch
> >
> > Please make SURE, your world and kernel is in sync and you've read
> > the pkg-messages. Also please unload the kernel module before
> > you update the port ;-).
> >
> > Many thx to all Vbox Devs, All supporters, my nice team! :-)
> >
> >
> > http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> >
> >  Happy Testing!
> >
> ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
> longer available, there is a
> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
> then again in ports/emulatores/virtualbox the version is 3.0.51r6,
>
> can someone please explain?
>
>


And on my FreeBSD 7.2-STABLE, compiling virtualbox fails as follows:



kBuild: Linking VBoxREM64
kBuild: Installing VBoxREM64 =>
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBox
REM64.so
kmk[2]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[1]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kBuild: Pass - Programs
kmk[1]: Entering directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[2]: Entering directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kBuild: Compiling tstAPI -
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/src/VBox/Main/testcase/tstAPI.cpp
kBuild: Linking tstAPI
/usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_get_ssl_client_cert_function'
/usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
/usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_load_ssl_client_cert'
/usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
/usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
kmk[2]: ***
[/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/obj/tstAPI/tstAPI]
Error 1
The failing command:
@g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r
6/out/freebsd.x86/release/obj/tstAPI/tstAPI
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/
release/obj/tstAPI/tstAPI.o   -L/usr/lib  -L/usr/X11R6/lib
-L/usr/local/lib
/usr/ports/emulators/virtualbox/work/virtualbo
x-3.0.51r6/out/freebsd.x86/release/bin/VBoxRT.so
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freeb
sd.x86/release/lib/VBoxCOM.a
/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6/out/freebsd.x86/release/bin/VBoxX
PCOM.so
kmk[2]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk[1]: *** [pass_binaries_this] Error 2
kmk[1]: Leaving directory
`/usr/ports/emulators/virtualbox/work/virtualbox-3.0.51r6'
kmk: *** [pass_binaries_order] Error 2
*** Error code 2

Stop in /usr/ports/emulators/virtualbox.


I hope someone can advise on what is needed.


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"If you have nothing good to say about someone, just shut up!."
  -- Lucky Dube
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-09-06 Thread Danny Braniss 
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> 
> Huhu,
> 
> Yes we life and that's good :-).
> Changes:
> 
>   - Fix build error when compiling in debug mode on FreeBSD HEAD
>   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout. 
>   - Some FreeBSD relate typos
>   - Enable shared OpenGL service. Completely untested due to lack of
> appropriate hardware but it compiles at least 
>   - Add support for shared clipboards. Requires libXt
>   - FreeBSD: Implement preemption API for guest SMP and enable
> it (slightly tested). Add neccessary RTMP* methods in userspace
> for the frontends to detect the number of CPUs
>   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> instead of a spinlock to fix the problems users are seeing
> (assertions with debugging enabled) while still being able
> to run on 100Hz hosts. No problems detected so far and Solaris
> doesn't use a spin mutex in this code too so it shouldn't do
> any harm (keeping fingers crossed)space for the frontends to
> detect the number of CPUs
>   - Add support for curl
>   - Add VBoxSharedClipboard
> 
> Ports Changes;
>   - Force guestadditions version to 2.2.4
>   - Removed Qt3 include replacements (already upstream)
>   - Removed cosmetic X11 include path patch
> 
> Please make SURE, your world and kernel is in sync and you've read
> the pkg-messages. Also please unload the kernel module before
> you update the port ;-).
> 
> Many thx to all Vbox Devs, All supporters, my nice team! :-)
> 
>http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> 
>  Happy Testing!
> 
ok, so some time has passed, but virtualbox-2.2.51r20457.tar.gz is no
longer available, there is a  
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/virtualbox-2.2.51r20457.tar.bz2
then again in ports/emulatores/virtualbox the version is 3.0.51r6,

can someone please explain?

danny


___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-20 Thread Justin Hibbits 
Hi Craig,

Yes, I've had problems trying to run vbox, where it just hangs.  I
tried running it through ktrace, but it just stopped the trace after
loading the libraries, nothing else.  Haven't tried with truss,
though, nor have I checked SUID or anything (wasn't motivated enough
to look deep into it).  This may be the same thing you're seeing.  I'm
also running 7.2-RELEASE i386.

- Justin

On Sat, Jun 20, 2009 at 11:25 AM, Craig
Butler wrote:
> Hi All
>
> Is anyone else having difficulties running this as a normal user ?
>
> * running 7.2-RELEASE i386
> * have added user to the vboxusers group.
> * confirmed by issuing groups command as user
>
> When I go to run VirtualBox it just hangs, if I run it within a truss
> session I get a warning saying;
>
> VirtualBox - Error in SUPR3HardenedMain
> Effective UID is not root
>
> I then tried to setuid the link and the binary, still getting the same
> result.
>
> Works ok if I su upto root tho...  Although sometimes only when running
> with truss.
>
> Cheers
>
> Craig B
>
>
>
> On Thu, 2009-06-11 at 21:45 +0200, Martin Wilke wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Huhu,
>>
>> Yes we life and that's good :-).
>> Changes:
>>
>>   - Fix build error when compiling in debug mode on FreeBSD HEAD
>>   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
>>   - Some FreeBSD relate typos
>>   - Enable shared OpenGL service. Completely untested due to lack of
>>     appropriate hardware but it compiles at least
>>   - Add support for shared clipboards. Requires libXt
>>   - FreeBSD: Implement preemption API for guest SMP and enable
>>     it (slightly tested). Add neccessary RTMP* methods in userspace
>>     for the frontends to detect the number of CPUs
>>   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
>>     instead of a spinlock to fix the problems users are seeing
>>     (assertions with debugging enabled) while still being able
>>     to run on 100Hz hosts. No problems detected so far and Solaris
>>     doesn't use a spin mutex in this code too so it shouldn't do
>>     any harm (keeping fingers crossed)space for the frontends to
>>     detect the number of CPUs
>>   - Add support for curl
>>   - Add VBoxSharedClipboard
>>
>> Ports Changes;
>>   - Force guestadditions version to 2.2.4
>>   - Removed Qt3 include replacements (already upstream)
>>   - Removed cosmetic X11 include path patch
>>
>> Please make SURE, your world and kernel is in sync and you've read
>> the pkg-messages. Also please unload the kernel module before
>> you update the port ;-).
>>
>> Many thx to all Vbox Devs, All supporters, my nice team! :-)
>>
>>    http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
>>
>>  Happy Testing!
>>
>> - - Martin
>>
>> - --
>>
>> +---+---+
>> |  PGP    : 0xB1E6FCE9  |  Jabber : miwi(at)BSDCrew.de  |
>> |  Skype  : splash_111  |  Mail   : miwi(at)FreeBSD.org |
>> +---+---+
>> |     Mess with the Best, Die like the Rest!          |
>> +---+---+
>> -BEGIN PGP SIGNATURE-
>> Version: GnuPG v2.0.11 (FreeBSD)
>>
>> iEYEARECAAYFAkoxXvUACgkQdLJIhLHm/OmHHQCcCvJ6EKNehym1siBuQICX+7+l
>> i2sAn0InwBQW7jf+l/PqjIM/BR/g3qhi
>> =hDW+
>> -END PGP SIGNATURE-
>> ___
>> freebsd-ports@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
>> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
>
> ___
> freebsd-curr...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
>
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-20 Thread Craig Butler 
Hi All

Is anyone else having difficulties running this as a normal user ?

* running 7.2-RELEASE i386 
* have added user to the vboxusers group.
* confirmed by issuing groups command as user

When I go to run VirtualBox it just hangs, if I run it within a truss
session I get a warning saying;

VirtualBox - Error in SUPR3HardenedMain
Effective UID is not root

I then tried to setuid the link and the binary, still getting the same
result.

Works ok if I su upto root tho...  Although sometimes only when running
with truss.

Cheers

Craig B

 

On Thu, 2009-06-11 at 21:45 +0200, Martin Wilke wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> 
> Huhu,
> 
> Yes we life and that's good :-).
> Changes:
> 
>   - Fix build error when compiling in debug mode on FreeBSD HEAD
>   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout. 
>   - Some FreeBSD relate typos
>   - Enable shared OpenGL service. Completely untested due to lack of
> appropriate hardware but it compiles at least 
>   - Add support for shared clipboards. Requires libXt
>   - FreeBSD: Implement preemption API for guest SMP and enable
> it (slightly tested). Add neccessary RTMP* methods in userspace
> for the frontends to detect the number of CPUs
>   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> instead of a spinlock to fix the problems users are seeing
> (assertions with debugging enabled) while still being able
> to run on 100Hz hosts. No problems detected so far and Solaris
> doesn't use a spin mutex in this code too so it shouldn't do
> any harm (keeping fingers crossed)space for the frontends to
> detect the number of CPUs
>   - Add support for curl
>   - Add VBoxSharedClipboard
> 
> Ports Changes;
>   - Force guestadditions version to 2.2.4
>   - Removed Qt3 include replacements (already upstream)
>   - Removed cosmetic X11 include path patch
> 
> Please make SURE, your world and kernel is in sync and you've read
> the pkg-messages. Also please unload the kernel module before
> you update the port ;-).
> 
> Many thx to all Vbox Devs, All supporters, my nice team! :-)
> 
>http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> 
>  Happy Testing!
> 
> - - Martin
> 
> - -- 
> 
> +---+---+
> |  PGP: 0xB1E6FCE9  |  Jabber : miwi(at)BSDCrew.de  |
> |  Skype  : splash_111  |  Mail   : miwi(at)FreeBSD.org |
> +---+---+
> | Mess with the Best, Die like the Rest!  |
> +---+---+
> -BEGIN PGP SIGNATURE-
> Version: GnuPG v2.0.11 (FreeBSD)
> 
> iEYEARECAAYFAkoxXvUACgkQdLJIhLHm/OmHHQCcCvJ6EKNehym1siBuQICX+7+l
> i2sAn0InwBQW7jf+l/PqjIM/BR/g3qhi
> =hDW+
> -END PGP SIGNATURE-
> ___
> freebsd-ports@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-16 Thread 田口毅 

Martin Wilke  さんは言われました：


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Huhu,

Yes we life and that's good :-).
Changes:

  - Fix build error when compiling in debug mode on FreeBSD HEAD
  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
  - Some FreeBSD relate typos
  - Enable shared OpenGL service. Completely untested due to lack of
appropriate hardware but it compiles at least
  - Add support for shared clipboards. Requires libXt
  - FreeBSD: Implement preemption API for guest SMP and enable
it (slightly tested). Add neccessary RTMP* methods in userspace
for the frontends to detect the number of CPUs
  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
instead of a spinlock to fix the problems users are seeing
(assertions with debugging enabled) while still being able
to run on 100Hz hosts. No problems detected so far and Solaris
doesn't use a spin mutex in this code too so it shouldn't do
any harm (keeping fingers crossed)space for the frontends to
detect the number of CPUs
  - Add support for curl
  - Add VBoxSharedClipboard

Ports Changes;
  - Force guestadditions version to 2.2.4
  - Removed Qt3 include replacements (already upstream)
  - Removed cosmetic X11 include path patch

Please make SURE, your world and kernel is in sync and you've read
the pkg-messages. Also please unload the kernel module before
you update the port ;-).

Many thx to all Vbox Devs, All supporters, my nice team! :-)

   http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz

 Happy Testing!

- - Martin

- --

+---+---+
|  PGP: 0xB1E6FCE9  |  Jabber : miwi(at)BSDCrew.de  |
|  Skype  : splash_111  |  Mail   : miwi(at)FreeBSD.org |
+---+---+
|   Mess with the Best, Die like the Rest!  |
+---+---+
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.11 (FreeBSD)

iEYEARECAAYFAkoxXvUACgkQdLJIhLHm/OmHHQCcCvJ6EKNehym1siBuQICX+7+l
i2sAn0InwBQW7jf+l/PqjIM/BR/g3qhi
=hDW+
-END PGP SIGNATURE-
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"






This message was sent using IMP, the Internet Messaging Program.

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-16 Thread 田口毅 

Hi,

I've test it on my FreeBSD-7.2p1 amd64 box.
I got "2 VirtualBox processes"-probrem. but I'd kill
2nd process, then it works fine.

So I'd tried to boot FreeBSD-7.2-RELEASE-amd64 installer
DVD.
loader work fine. but try to launch /stand/sysinstall,
it does not work. it stopped ;-(
installer's dialogue does not displaied.

i386 version was work fine.

Thanks.



This message was sent using IMP, the Internet Messaging Program.

___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-16 Thread Andriy Gapon 

BTW, it seems that the port doesn't do kldxref on /boot/modules after 
installation
(or un-installation). Ditto for the package built from the port.

Also, the package (unlike the port) can not install the kld module. It seem that
this happens because of the leading / in %%KMODDIR%%.
That is, plist (+CONTENTS) expands to:
@cwd /
/boot/modules/vboxdrv.ko
But I think that it should be:
@cwd /
boot/modules/vboxdrv.ko

-- 
Andriy Gapon
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-15 Thread Matthias Apitz 
El día Monday, June 15, 2009 a las 01:30:41PM +0300, Odhiambo  ??? 
escribió:

> On Mon, Jun 15, 2009 at 1:26 PM, Martin Wilke  wrote:
> 
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > The problem is use openssl from ports. You should deinstall that
> > and rebuild.
> 
> 
> That also means that I have to relink so many of my applications to openssl
> from BASE, right?
> Why did this version of virtualbox fail with the openssl from ports? All the
> others installed successfully?

All,

Would it be possible to discuss that software in *only* one mailing
list, for example only in -emulation, and not cross posting this to three
lists? thanks in advance

matthias
-- 
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e  - w http://www.unixarea.de/
People who hate Microsoft Windows use Linux but people who love UNIX use 
FreeBSD.
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-15 Thread Odhiambo ワシントン 
On Mon, Jun 15, 2009 at 1:26 PM, Martin Wilke  wrote:

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> The problem is use openssl from ports. You should deinstall that
> and rebuild.


That also means that I have to relink so many of my applications to openssl
from BASE, right?
Why did this version of virtualbox fail with the openssl from ports? All the
others installed successfully?

-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"If you have nothing good to say about someone, just shut up!."
  -- Lucky Dube
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-15 Thread Martin Wilke 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

The problem is use openssl from ports. You should deinstall that
and rebuild.

- - Martin

On Mon, Jun 15, 2009 at 01:17:53PM +0300, Odhiambo  ??? wrote:
> On Fri, Jun 12, 2009 at 4:12 PM, Andriy Gapon  wrote:
> 
> > on 11/06/2009 22:45 Martin Wilke said the following:
> > > Huhu,
> > >
> > > Yes we life and that's good :-).
> >
> > There should be a warning that this version won't start snapshots taken by
> > the
> > previous version.
> >
> 
> 
> My build is failing (for the first time ever since I started testing:)
> 
> kmk[1]: Entering directory
> `/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
> kmk[2]: Entering directory
> `/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
> kBuild: Linking tstAPI
> /usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
> /usr/local/lib/libssl.so.5: undefined reference to
> `ENGINE_get_ssl_client_cert_function'
> /usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
> /usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
> /usr/local/lib/libssl.so.5: undefined reference to
> `ENGINE_load_ssl_client_cert'
> /usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
> kmk[2]: ***
> [/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI]
> Error 1
> The failing command:
> @g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
> /usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI
> /usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI.o
> -L/usr/lib  -L/usr/X11R6/lib  -L/usr/local/lib
> /usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/bin/VBoxRT.so
> /usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/lib/VBoxCOM.a
> /usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/bin/VBoxXPCOM.so
> kmk[2]: Leaving directory
> `/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
> kmk[1]: *** [pass_binaries_this] Error 2
> kmk[1]: Leaving directory
> `/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
> kmk: *** [pass_binaries_order] Error 2
> *** Error code 2
> 
> Stop in /usr/home/wash/VBOX/virtualbox.
> 
> 
> Not sure what is causing this.
> 
> 
> -- 
> Best regards,
> Odhiambo WASHINGTON,
> Nairobi,KE
> +254733744121/+254722743223
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> "If you have nothing good to say about someone, just shut up!."
>   -- Lucky Dube

- -- 

+---+---+
|  PGP: 0xB1E6FCE9  |  Jabber : miwi(at)BSDCrew.de  |
|  Skype  : splash_111  |  Mail   : miwi(at)FreeBSD.org |
+---+---+
|   Mess with the Best, Die like the Rest!  |
+---+---+
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.11 (FreeBSD)

iEYEARECAAYFAko2Ib4ACgkQdLJIhLHm/OkZZQCguicyAg5OlHyBD8fgdA9YSNQ0
Fe0AoI3JBdGvGmyp6lTsE3CguGCkxLeY
=YVqR
-END PGP SIGNATURE-
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-15 Thread Odhiambo ワシントン 
On Fri, Jun 12, 2009 at 4:12 PM, Andriy Gapon  wrote:

> on 11/06/2009 22:45 Martin Wilke said the following:
> > Huhu,
> >
> > Yes we life and that's good :-).
>
> There should be a warning that this version won't start snapshots taken by
> the
> previous version.
>


My build is failing (for the first time ever since I started testing:)

kmk[1]: Entering directory
`/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
kmk[2]: Entering directory
`/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
kBuild: Linking tstAPI
/usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_get_ssl_client_cert_function'
/usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
/usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to
`ENGINE_load_ssl_client_cert'
/usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
kmk[2]: ***
[/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI]
Error 1
The failing command:
@g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m32   -o
/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI
/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/obj/tstAPI/tstAPI.o
-L/usr/lib  -L/usr/X11R6/lib  -L/usr/local/lib
/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/bin/VBoxRT.so
/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/lib/VBoxCOM.a
/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.x86/release/bin/VBoxXPCOM.so
kmk[2]: Leaving directory
`/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
kmk[1]: *** [pass_binaries_this] Error 2
kmk[1]: Leaving directory
`/usr/home/wash/VBOX/virtualbox/work/virtualbox-2.2.51r20457'
kmk: *** [pass_binaries_order] Error 2
*** Error code 2

Stop in /usr/home/wash/VBOX/virtualbox.


Not sure what is causing this.


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"If you have nothing good to say about someone, just shut up!."
  -- Lucky Dube
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-13 Thread Gustavo Perez Querol 
> on 11/06/2009 22:45 Martin Wilke said the following:
>>>   - Enable shared OpenGL service. Completely untested due to lack of
>>> appropriate hardware but it compiles at least
>
> Doesn't look like it would work at the run time (at least for me):
>  OpenGL Error: DLL Loader couldn't find/open /libGL.so.1
>  OpenGL Error: The render SPU was unable to load the native OpenGL library
>  OpenGL Warning: Error closing DLL /libGL.so.1
>
> libGL.so.1 lives in /usr/local/lib.

  To survive while someone fixes vbox, edit /etc/libmap.conf and add
something like this :


[VirtualBox]
/libGL.so.1 /usr/local/lib/libGL.so.1

  I had the same problem, and that fixed vbox.

  And report that shared clipboards with a windows xp guest work for me
with virtualbox take 6 ! Thank you !

  Greets,

  Gus
>
> --
> Andriy Gapon
> ___
> freebsd-emulat...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-emulation
> To unsubscribe, send any mail to
> "freebsd-emulation-unsubscr...@freebsd.org"
>


___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Olivier SMEDTS 
2009/6/12 Sam Fourman Jr. :
> On Thu, Jun 11, 2009 at 2:45 PM, Martin Wilke wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Huhu,
>>
>> Yes we life and that's good :-).
>> Changes:
>>
>>  - Fix build error when compiling in debug mode on FreeBSD HEAD
>>  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
>>  - Some FreeBSD relate typos
>>  - Enable shared OpenGL service. Completely untested due to lack of
>>    appropriate hardware but it compiles at least
>>  - Add support for shared clipboards. Requires libXt
>>  - FreeBSD: Implement preemption API for guest SMP and enable
>>    it (slightly tested). Add neccessary RTMP* methods in userspace
>>    for the frontends to detect the number of CPUs
>>  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
>>    instead of a spinlock to fix the problems users are seeing
>>    (assertions with debugging enabled) while still being able
>>    to run on 100Hz hosts. No problems detected so far and Solaris
>>    doesn't use a spin mutex in this code too so it shouldn't do
>>    any harm (keeping fingers crossed)space for the frontends to
>>    detect the number of CPUs
>>  - Add support for curl
>>  - Add VBoxSharedClipboard
>>
>> Ports Changes;
>>  - Force guestadditions version to 2.2.4
>>  - Removed Qt3 include replacements (already upstream)
>>  - Removed cosmetic X11 include path patch
>>
>> Please make SURE, your world and kernel is in sync and you've read
>> the pkg-messages. Also please unload the kernel module before
>> you update the port ;-).
>>
>> Many thx to all Vbox Devs, All supporters, my nice team! :-)
>>
>>   http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
>>
>>  Happy Testing!
>>
>> - - Martin
>
>
> This may be off topic a bit, but I am looking for a way to plug my Apple 
> Iphone
> into a Windows based guest.
>
> Does virtualbox allow usb passthrough?

Yes, but not on FreeBSD, and even with that it doesn't work in
VirtualBox (Apple iPhone with iTunes are really picky on USB drivers).
Neither in qemu or VMWare. If you want to use iTunes you'll have to
install Windows, else use another program.

>
>
> Sam Fourman Jr.
> ___
> freebsd-curr...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
>



-- 
Olivier Smedts _
ASCII ribbon campaign ( )
e-mail: oliv...@gid0.org- against HTML email & vCards  X
www: http://www.gid0.org- against proprietary attachments / \

  "Il y a seulement 10 sortes de gens dans le monde :
  ceux qui comprennent le binaire,
  et ceux qui ne le comprennent pas."
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Sam Fourman Jr. 
On Thu, Jun 11, 2009 at 2:45 PM, Martin Wilke wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Huhu,
>
> Yes we life and that's good :-).
> Changes:
>
>  - Fix build error when compiling in debug mode on FreeBSD HEAD
>  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout.
>  - Some FreeBSD relate typos
>  - Enable shared OpenGL service. Completely untested due to lack of
>    appropriate hardware but it compiles at least
>  - Add support for shared clipboards. Requires libXt
>  - FreeBSD: Implement preemption API for guest SMP and enable
>    it (slightly tested). Add neccessary RTMP* methods in userspace
>    for the frontends to detect the number of CPUs
>  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
>    instead of a spinlock to fix the problems users are seeing
>    (assertions with debugging enabled) while still being able
>    to run on 100Hz hosts. No problems detected so far and Solaris
>    doesn't use a spin mutex in this code too so it shouldn't do
>    any harm (keeping fingers crossed)space for the frontends to
>    detect the number of CPUs
>  - Add support for curl
>  - Add VBoxSharedClipboard
>
> Ports Changes;
>  - Force guestadditions version to 2.2.4
>  - Removed Qt3 include replacements (already upstream)
>  - Removed cosmetic X11 include path patch
>
> Please make SURE, your world and kernel is in sync and you've read
> the pkg-messages. Also please unload the kernel module before
> you update the port ;-).
>
> Many thx to all Vbox Devs, All supporters, my nice team! :-)
>
>   http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
>
>  Happy Testing!
>
> - - Martin


This may be off topic a bit, but I am looking for a way to plug my Apple Iphone
into a Windows based guest.

Does virtualbox allow usb passthrough?


Sam Fourman Jr.
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Maho NAKATA 
Hi Martin,

I tested
http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
.

* on my FBSD7 box, when I launch VirtualBox, I have two process
named VirtualBox. I have to kill one. This problem has been reported

http://lists.freebsd.org/pipermail/freebsd-emulation/2009-June/006266.html
http://lists.freebsd.org/pipermail/freebsd-ports/2009-June/055276.html

and should be noted.

* ports intalles fine.

* Installed Windows7RC Japanese version. I got an error when I install
but no error for second (clean) install. I suspect it is just a hiccup.

* With GuestAddon, cut and paste works between host and guest. (Windows7RC JA)
even Japanese Text.

* With GuestAddon + 7RC, crystal benchmark test result didn't change
http://lists.freebsd.org/pipermail/freebsd-ports/2009-June/055089.html
. (this is a correct result)

Best,

From: Martin Wilke 
Subject: [Call For Testing] VirtualBox for FreeBSD! take 6
Date: Thu, 11 Jun 2009 21:45:57 +0200
> Many thx to all Vbox Devs, All supporters, my nice team! :-)
> 
>http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> 
>  Happy Testing!

-- Nakata Maho http://accc.riken.jp/maho/ , http://ja.openoffice.org/ 
   Nakata Maho's PGP public keys: http://accc.riken.jp/maho/maho.pgp.txt
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Andriy Gapon 
on 11/06/2009 22:45 Martin Wilke said the following:
>>   - Enable shared OpenGL service. Completely untested due to lack of
>> appropriate hardware but it compiles at least 

Doesn't look like it would work at the run time (at least for me):
 OpenGL Error: DLL Loader couldn't find/open /libGL.so.1
 OpenGL Error: The render SPU was unable to load the native OpenGL library
 OpenGL Warning: Error closing DLL /libGL.so.1

libGL.so.1 lives in /usr/local/lib.

-- 
Andriy Gapon
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Ralf Folkerts 

Martin Wilke wrote:

[...] Please make SURE, your world and kernel is in sync and you've read
the pkg-messages. Also please unload the kernel module before
you update the port ;-).

Many thx to all Vbox Devs, All supporters, my nice team! :-)

   http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz

 Happy Testing!
  


Hi Martin,

while I had no Compile-Problems with -5, this -6 does not compile:

/usr/include/machine/cpufunc.h:133:1: warning: "ffs" 
redefined 
In file included from 
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/src/VBox/HostDrivers/Support/SUPDrv.c:35:

/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/src/VBox/HostDrivers/Support/SUPDrvInternal.h:125:1: 
warning: this is the location of the previous definition

/usr/local/lib/libssl.so.5: undefined reference to `d2i_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to 
`ENGINE_get_ssl_client_cert_function'

/usr/local/lib/libssl.so.5: undefined reference to `HMAC_CTX_set_flags'
/usr/local/lib/libssl.so.5: undefined reference to `i2d_X509_EXTENSIONS'
/usr/local/lib/libssl.so.5: undefined reference to 
`ENGINE_load_ssl_client_cert'

/usr/local/lib/libssl.so.5: undefined reference to `pqueue_size'
/usr/local/lib/libssl.so.5: undefined reference to `EVP_idea_cbc'
kmk[2]: *** 
[/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/obj/tstAPI/tstAPI] 
Error 1

The failing command:
@g++   '-Wl,-rpath,/usr/local/lib/virtualbox'   -m64   -o 
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/obj/tstAPI/tstAPI 
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/obj/tstAPI/tstAPI.o   
-L/usr/lib  -L/usr/X11R6/lib  -L/usr/local/lib   
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/bin/VBoxRT.so   
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/lib/VBoxCOM.a   
/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457/out/freebsd.amd64/release/bin/VBoxXPCOM.so

kmk[2]: *** Waiting for unfinished jobs
kmk[2]: Leaving directory 
`/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457'
kmk[2]: Entering directory 
`/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457'

kmk[2]: *** Exiting with status 2
kmk[1]: *** [pass_binaries_this] Error 2
kmk[1]: Leaving directory 
`/home/ralf/vbox2/virtualbox/work/virtualbox-2.2.51r20457'

kmk: *** [pass_binaries_order] Error 2
*** Error code 2

Stop in /home/ralf/vbox2/virtualbox.
*** Error code 1

Stop in /home/ralf/vbox2/virtualbox.

I tried both, the -6 tarball and the SVN-Version (@Rev 398). Same error. 
I also csupped my world/kernel, and built/installed both, but w/o success.


This is on amd64:

7.2-STABLE FreeBSD 7.2-STABLE #0: Fri Jun 12 19:08:44 CEST 2009 
t...@beaster.home.folkerts-net.de:/usr/obj/usr/src/sys/GENERIC  amd64


Cheers,
_ralf_
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Andriy Gapon 
on 12/06/2009 16:12 Andriy Gapon said the following:
> on 11/06/2009 22:45 Martin Wilke said the following:
>> Huhu,
>>
>> Yes we life and that's good :-).
> 
> There should be a warning that this version won't start snapshots taken by the
> previous version.

BTW, the error in my case was:
Changing the VM state from 'CREATED' to 'LOADING'.
SSM: File header: Format V1.2, VirtualBox Version 2.2.51 r19957, 64-bit host,
cbGCPhys=8, cbGCPtr=8
SSM: Saved state info:
SSM:   OSE: true
Ram range: fec0-fec00fff 1000 bytes nobits I/O
APIC Memory
State: e000-e0ff 0100 bytes bits VRam
SSM: LoadExec failed with rc=VERR_SSM_LOAD_CONFIG_MISMATCH for unit 'pgm'!
Changing the VM state from 'LOADING' to 'LOAD_FAILURE'.

-- 
Andriy Gapon
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Patrick Lamaiziere 
Le Thu, 11 Jun 2009 21:45:57 +0200,
Martin Wilke  a écrit :

> Many thx to all Vbox Devs, All supporters, my nice team! :-)

Many thanks!
 
>http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz

May be I missed something but I'm not able to launch VirtualBox (same
with the previous version)

I am in the group vboxusers and /proc is mounted, vboxdrv.ko is loaded.
When I start VirtualBox, it does nothing and I only see two processes
"VirtualBox"

?

Thanks.
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-12 Thread Andriy Gapon 
on 11/06/2009 22:45 Martin Wilke said the following:
> Huhu,
> 
> Yes we life and that's good :-).

There should be a warning that this version won't start snapshots taken by the
previous version.

> Changes:
> 
>   - Fix build error when compiling in debug mode on FreeBSD HEAD
>   - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout. 
>   - Some FreeBSD relate typos
>   - Enable shared OpenGL service. Completely untested due to lack of
> appropriate hardware but it compiles at least 
>   - Add support for shared clipboards. Requires libXt
>   - FreeBSD: Implement preemption API for guest SMP and enable
> it (slightly tested). Add neccessary RTMP* methods in userspace
> for the frontends to detect the number of CPUs
>   - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
> instead of a spinlock to fix the problems users are seeing
> (assertions with debugging enabled) while still being able
> to run on 100Hz hosts. No problems detected so far and Solaris
> doesn't use a spin mutex in this code too so it shouldn't do
> any harm (keeping fingers crossed)space for the frontends to
> detect the number of CPUs
>   - Add support for curl
>   - Add VBoxSharedClipboard
> 
> Ports Changes;
>   - Force guestadditions version to 2.2.4
>   - Removed Qt3 include replacements (already upstream)
>   - Removed cosmetic X11 include path patch
> 
> Please make SURE, your world and kernel is in sync and you've read
> the pkg-messages. Also please unload the kernel module before
> you update the port ;-).
> 
> Many thx to all Vbox Devs, All supporters, my nice team! :-)
> 
>http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz
> 
>  Happy Testing!
> 
> - Martin
> 
___
freebsd-emulat...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-emulation
To unsubscribe, send any mail to "freebsd-emulation-unsubscr...@freebsd.org"


-- 
Andriy Gapon
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: [Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-11 Thread Glen Barber 
Hi, Martin et al

This latest version builds fine for me and no panic on kldload vboxdrv.ko

uname -a:
FreeBSD orion 7.2-STABLE FreeBSD 7.2-STABLE #3 r193905: Wed Jun 10
08:42:33 EDT 2009 r...@orion:/usr/obj/usr/src/sys/ORION i386


Thanks for taking the time to port this!


-- 
Glen Barber
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

[Call For Testing] VirtualBox for FreeBSD! take 6

2009-06-11 Thread Martin Wilke 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Huhu,

Yes we life and that's good :-).
Changes:

  - Fix build error when compiling in debug mode on FreeBSD HEAD
  - SemEvent?-r0drv/FreeBSD: Don't use tvtohz for an infinite timeout. 
  - Some FreeBSD relate typos
  - Enable shared OpenGL service. Completely untested due to lack of
appropriate hardware but it compiles at least 
  - Add support for shared clipboards. Requires libXt
  - FreeBSD: Implement preemption API for guest SMP and enable
it (slightly tested). Add neccessary RTMP* methods in userspace
for the frontends to detect the number of CPUs
  - Runtime/semevent-r0drv-freebsd: Use a sleeping mutex
instead of a spinlock to fix the problems users are seeing
(assertions with debugging enabled) while still being able
to run on 100Hz hosts. No problems detected so far and Solaris
doesn't use a spin mutex in this code too so it shouldn't do
any harm (keeping fingers crossed)space for the frontends to
detect the number of CPUs
  - Add support for curl
  - Add VBoxSharedClipboard

Ports Changes;
  - Force guestadditions version to 2.2.4
  - Removed Qt3 include replacements (already upstream)
  - Removed cosmetic X11 include path patch

Please make SURE, your world and kernel is in sync and you've read
the pkg-messages. Also please unload the kernel module before
you update the port ;-).

Many thx to all Vbox Devs, All supporters, my nice team! :-)

   http://people.freebsd.org/~miwi/vbox/virtualbox_6.tgz

 Happy Testing!

- - Martin

- -- 

+---+---+
|  PGP: 0xB1E6FCE9  |  Jabber : miwi(at)BSDCrew.de  |
|  Skype  : splash_111  |  Mail   : miwi(at)FreeBSD.org |
+---+---+
|   Mess with the Best, Die like the Rest!  |
+---+---+
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.11 (FreeBSD)

iEYEARECAAYFAkoxXvUACgkQdLJIhLHm/OmHHQCcCvJ6EKNehym1siBuQICX+7+l
i2sAn0InwBQW7jf+l/PqjIM/BR/g3qhi
=hDW+
-END PGP SIGNATURE-
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"