RE: Samba43 install error
> Am 28.12.2016 um 14:32 schrieb Gerard Seibert: > > I am unable to update samba43. The following error message is displayed: > > > > samba43-4.3.13 cannot install: SASL support requested and > > openldap-client-2.4.44 is installed. > > *** Error code 1 > > > > Stop. > > make: stopped in /usr/ports/net/samba43 > > > > make sure you have in your make.conf (if poudriere user, use > /usr/local/etc/poudriere.d/make.conf): > > WANT_OPENLDAP_SASL=yes > > Rerun poudriere to rebuild all necessary dependencies including samba43. > > Gruß > Matthias I have been given two workable suggestons for building (updating) the port; however, the bottom line is that there is a serious problem with the port to begin with. These manual fixes required to just get the port to build should not be required. I would hope that the port maintainer would correct them. -- Carmel ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Samba43 install error
On Thu, 29 Dec 2016 at 00:34, Gerard Seibertwrote: > FreeBSD 11.0 > > > > I am unable to update samba43. The following error message is displayed: > > > > samba43-4.3.13 cannot install: SASL support requested and > > openldap-client-2.4.44 is installed. > > *** Error code 1 > > > > Stop. > > make: stopped in /usr/ports/net/samba43 > > > > I am using the default port configuration as listed below: > > > > ===> The following configuration options are available for samba43-4.3.13: > > ACL_SUPPORT=on: File system ACL support > > ADS=on: Active Directory client support > > AD_DC=on: Active Directory Domain Controller support > > AIO_SUPPORT=on: Asyncronous IO support > > CUPS=off: CUPS printing system support > > DEBUG=on: Build with debugging support > > DEVELOPER=off: With development support > > DNSUPDATE=on: Dynamic DNS update (require ADS) > > DOCS=on: Build and/or install documentation > > EXP_MODULES=off: Experimental modules > > FAM=on: File Alteration Monitor support > > LDAP=on: LDAP client support > > MANPAGES=off: Build manpages from DOCBOOK templates > > PAM_SMBPASS=off: PAM authentication via passdb backends > > PTHREADPOOL=on: Pthread pool > > QUOTAS=on: Disk quota support > > SYSLOG=on: Syslog logging support > > UTMP=on: UTMP accounting support > > > Options available for the radio DNS: you can only select none or one > of them > > NSUPDATE=off: Use samba NSUPDATE utility for AD DC > > BIND99=off: Use bind99 as AD DC DNS server frontend > > BIND910=off: Use bind910 as AD DC DNS server frontend > > > Options available for the radio ZEROCONF: you can only select none > or one of them > > AVAHI=off: Zeroconf support via Avahi > > MDNSRESPONDER=off: Zeroconf support via mDNSResponder > > > > I turned of LDAP in the config file; however, the problem still exists. > > > > I do not understand why this is happening. Does anyone have a work-around > for this or should I file a PR? > > > > -- > > Carmel > > > > ___ > > freebsd-ports@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-ports > > To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" > > I had a problem on FreeBSD 11 & samba 44. I used gcc5 to build. I modified s few things and now running samba 4.4.8 :) I force gcc5 use for a few ports as clang fails. Might help you. Regards. ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Samba43 install error
Am 28.12.2016 um 14:32 schrieb Gerard Seibert: > I am unable to update samba43. The following error message is displayed: > > samba43-4.3.13 cannot install: SASL support requested and > openldap-client-2.4.44 is installed. > *** Error code 1 > > Stop. > make: stopped in /usr/ports/net/samba43 > make sure you have in your make.conf (if poudriere user, use /usr/local/etc/poudriere.d/make.conf): WANT_OPENLDAP_SASL=yes Rerun poudriere to rebuild all necessary dependencies including samba43. Gruß Matthias -- "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to produce bigger and better idiots. So far, the universe is winning." -- Rich Cook ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Samba43 install error
On 12/28/16 15:33, Adam Weinberger wrote: OpenLDAP support is an absolute mess and is not handled well here. samba asks for a SASL-enabled OpenLDAP, but the mandatory ldb dependency brings in non-SASL OpenLDAP. The ADS knob also brings in OpenLDAP but never tells you about it. Until this is properly fixed, you'll need to disable both the LDAP and ADS options. I seem to have solved with: pkg delete openldap-client portupgrade -RN openldap-sasl-client portupgrade -RN samba43 Did I do a mess? bye & Thanks av. ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Samba43 install error
> On 28 Dec, 2016, at 6:32, Gerard Seibertwrote: > > FreeBSD 11.0 > > I am unable to update samba43. The following error message is displayed: > > samba43-4.3.13 cannot install: SASL support requested and > openldap-client-2.4.44 is installed. > *** Error code 1 > > Stop. > make: stopped in /usr/ports/net/samba43 > > I am using the default port configuration as listed below: > > ===> The following configuration options are available for samba43-4.3.13: > ACL_SUPPORT=on: File system ACL support > ADS=on: Active Directory client support > AD_DC=on: Active Directory Domain Controller support > AIO_SUPPORT=on: Asyncronous IO support > CUPS=off: CUPS printing system support > DEBUG=on: Build with debugging support > DEVELOPER=off: With development support > DNSUPDATE=on: Dynamic DNS update (require ADS) > DOCS=on: Build and/or install documentation > EXP_MODULES=off: Experimental modules > FAM=on: File Alteration Monitor support > LDAP=on: LDAP client support > MANPAGES=off: Build manpages from DOCBOOK templates > PAM_SMBPASS=off: PAM authentication via passdb backends > PTHREADPOOL=on: Pthread pool > QUOTAS=on: Disk quota support > SYSLOG=on: Syslog logging support > UTMP=on: UTMP accounting support > > Options available for the radio DNS: you can only select none or one of > them > NSUPDATE=off: Use samba NSUPDATE utility for AD DC > BIND99=off: Use bind99 as AD DC DNS server frontend > BIND910=off: Use bind910 as AD DC DNS server frontend > > Options available for the radio ZEROCONF: you can only select none or > one of them > AVAHI=off: Zeroconf support via Avahi > MDNSRESPONDER=off: Zeroconf support via mDNSResponder > > I turned of LDAP in the config file; however, the problem still exists. > > I do not understand why this is happening. Does anyone have a work-around for > this or should I file a PR? OpenLDAP support is an absolute mess and is not handled well here. samba asks for a SASL-enabled OpenLDAP, but the mandatory ldb dependency brings in non-SASL OpenLDAP. The ADS knob also brings in OpenLDAP but never tells you about it. Until this is properly fixed, you'll need to disable both the LDAP and ADS options. # Adam -- Adam Weinberger ad...@adamw.org https://www.adamw.org ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Samba43 install error
FreeBSD 11.0 I am unable to update samba43. The following error message is displayed: samba43-4.3.13 cannot install: SASL support requested and openldap-client-2.4.44 is installed. *** Error code 1 Stop. make: stopped in /usr/ports/net/samba43 I am using the default port configuration as listed below: ===> The following configuration options are available for samba43-4.3.13: ACL_SUPPORT=on: File system ACL support ADS=on: Active Directory client support AD_DC=on: Active Directory Domain Controller support AIO_SUPPORT=on: Asyncronous IO support CUPS=off: CUPS printing system support DEBUG=on: Build with debugging support DEVELOPER=off: With development support DNSUPDATE=on: Dynamic DNS update (require ADS) DOCS=on: Build and/or install documentation EXP_MODULES=off: Experimental modules FAM=on: File Alteration Monitor support LDAP=on: LDAP client support MANPAGES=off: Build manpages from DOCBOOK templates PAM_SMBPASS=off: PAM authentication via passdb backends PTHREADPOOL=on: Pthread pool QUOTAS=on: Disk quota support SYSLOG=on: Syslog logging support UTMP=on: UTMP accounting support > Options available for the radio DNS: you can only select none or one of them NSUPDATE=off: Use samba NSUPDATE utility for AD DC BIND99=off: Use bind99 as AD DC DNS server frontend BIND910=off: Use bind910 as AD DC DNS server frontend > Options available for the radio ZEROCONF: you can only select none or one of them AVAHI=off: Zeroconf support via Avahi MDNSRESPONDER=off: Zeroconf support via mDNSResponder I turned of LDAP in the config file; however, the problem still exists. I do not understand why this is happening. Does anyone have a work-around for this or should I file a PR? -- Carmel ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"