Re: freebsd 7 release date :)
On 20/08/2007, at 10:47 AM, Jerry McAllister wrote: On Sun, Aug 19, 2007 at 03:05:00PM +0200, Wojciech Puchar wrote: just for reference only: Original release planned date of 7.0 was end of Jul. But now is nearly end of Aug. So Which date you guess 7.0 will be released? :D when it will be ready. if time is more important than quality for you get simply get -current. even if not - and you would like help testing it, fetch and report problems. There was obviously no intent to challenge or apply preasure in the question so you don't need to be snippy. If you don't have any useful information or at least information you think might be useful (qualifier for my posts) then don't bother replying - at least not snippy, posts. We can afford to be civil - expecially when a civil question is asked. The person was just noting that the old guesses were no longer operable and hoping that some new best guesses might have been made. We all know these dates are very movable and for very good reasons. No one is pushing for low quality, hurried up junk. But those best guesses by people in the know about how the processes if moving along are helpful for those of use out here in the hinterland trying to make it through each day. There was nothing snippy in that post, it was just succinct. By now, people in the know have learned that it really will be done "when it's done". ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
IPv4 over IPV4 on the same network segment
Hi Folks, I've got to route a network over an ipv4 tunnel between to machines which have their parent link on the same network segment. Everything works well except for people trying to access the external address of one of the link machines: ie: Physical 120.1.1.2 (xl0)---> 120.1.1.3 (sk0) Tunnel 192.168.3.1(gif0) --> 192.168.0.1 (gif0) || NET1 (xl1) NET 2 (sk1) 192.168.3.0/24 192.168.0/24 Now anyone on net NET1 can talk to NET2 fine via a default route to gif0. However anyone on NET1 can't talk to 120.1.1.3 as routing tries to send via xl0 as it's on the same net and firewall rules prevent it.The default route for xl0 is gif0 with a link level route to the ip of sk0. Anyone got an idea how to fully route xl1 via gif0? Including the parent physical address? Cheers, Benjamin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
GEOM, Vinum difference
Hi, I see that if I want to do disk striping/ concating/ mirroring, FreeBSD offers the GEOM utilities and the Vinum LVM (which fits into the GEOM architecture). Why do we have two different ways of doing the same tasks -- any advantages/ disadvantages to either approach? I did check the archives before posting this question. Got a couple of hits, but they seem to be old info. Hence this question. The GEOM utilities seem to be newer, fancier, and probably the future. Vinum seems to be how things used to happen earlier. After GEOM was introduced, if Vinum had been discarded, I would have understood. But it wasn't. Instead, it was rewritten for GEOM and is probably still actively maintained. So I wonder why we have two ways of doing the same tasks ... What I understand from the archives is that Vinum was _probably_ rewritten for GEOM coz the GEOM utilities were still new and not as time tested as Vinum. Is that the case? So will Vinum continue to be around for a while or it be discarded? - Rakhesh http://rakhesh.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IPv4 over IPV4 on the same network segment
On Aug 20, 2007, at 2:26 AMAug 20, 2007, Benjamin Close wrote: Hi Folks, I've got to route a network over an ipv4 tunnel between to machines which have their parent link on the same network segment. Everything works well except for people trying to access the external address of one of the link machines: ie: Physical 120.1.1.2 (xl0)---> 120.1.1.3 (sk0) Tunnel 192.168.3.1(gif0) --> 192.168.0.1 (gif0) || NET1 (xl1) NET 2 (sk1) 192.168.3.0/24 192.168.0/24 Now anyone on net NET1 can talk to NET2 fine via a default route to gif0. However anyone on NET1 can't talk to 120.1.1.3 as routing tries to send via xl0 as it's on the same net and firewall rules prevent it.The default route for xl0 is gif0 with a link level route to the ip of sk0. Anyone got an idea how to fully route xl1 via gif0? Including the parent physical address? Benjamin, I wouldn't use gif0 as the default route, but rather the physical interface. Your system should automatically become aware of the new / 24 networks when you create the gif tunnel. I'm assuming, 120.1.1.2 can ping 120.1.1.3? If so, can either machine ping 192.168.0.1 and 192.168.3.1? If that's the case, simply setting gateway_enable="YES" in /etc/rc.conf should allow all the necessary packets to go to the correct destination. FWIW, if you do want to set the default across the gif tunnel, the other end will have to be able to handle all the internet-bound traffic. HTH - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ath -- Atheros IEEE 802.11 wireless network driver
Hi, I have been having some interupt issues with this driver. If I hook to a wireless access point that is week, I get tons of interrupts and kills the performance of my laptop. However, when I us it at home with the access point in the same room as my laptop everything works great. I a connect to the same access point using a Windows box (different wireless card unfortunetly) I do not have a problem. I am running FreeBSD 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #2: Sat Aug 4 23:06:38 EDT 2007 I am not sure where to start to debug this or if there is a better mailing list to send this. Any suggestions would be great. Thanks, Arend ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 6.2-RELEASE-p7 box crashing
On Aug 20, 2007, at 7:10 AMAug 20, 2007, आशीष शुक्ल Ashish Shukla wrote: Hi, I'm running FreeBSD 6.2-RELEASE-p7 custom compiled kernel running on Intel Pentium 4 630 (AMD64 architecture). FreeBSD 6.2-RELEASE is the most stable release I've ever seen in my 3 years of BSD life. But for the first time, it crashed today, that's too severe. It suddenly freezed, and then heard a long beep, after that rebooted within 2 seconds. Now, since then it either gets rebooted during filesystem check, or either during starting "/usr/local/etc/rc.d/avahi-daemon.sh" . Right now, I'm mailing from Linux, and attaching a copy of "/var/ log/messages" with output of FreeBSD booted with verbose logging chosen at boot menu. I've tested my memory using memtest86+ executing all tests (including Bit fade test), and it passed all tests. Please suggest what should I do ? My recommendation would be to run mbmon or something similar to monitor system temperature, etc. I've not got a lot of experience yet with the AMD64 architecture, but the little I do seems to be prone to over heating. Often, when I've had similar problems to those you describe, I can later attribute those reboots and crashes to system temperature. HTH - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 6.2-RELEASE-p7 box crashing
Sorry to reply again so soon, but I failed to read through your attachment before sending my previous message. I notice that your system seems to have crashed at least a few times during the loading of PowerDNS. Immediately before, there's a warning about the variables in /etc/rc.conf: Aug 20 15:50:43 chatteau root: /etc/rc: WARNING: $pdnsd_enable is not set properly - see rc.conf(5). Also, have you tried booting with ACPI disabled? I know there are still some systems out there that don't quite work the way they ought to. - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
IPFW Questions.
Hi all, I was wondering what the concensus is on using dynamic rules in IPFW. Every once in a while, I suppose there is a DoS attaclk that causes me to see hundreds of: +ipfw: install_state: Too many dynamic rules in my security log. I am sure i read somewhere that many people are skipping the dynamic rules and just relying on the line by line rules. You thoughts please. Any while your up, does anyone really know what this means? ipfw: pullup failed I dont see that often maybe 1 or 2 times a month. -Grant ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: IPFW Questions.
I have same problem related to ipfw pullup. I couldn't find any documentation or solution on it. Narek -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Grant Peel Sent: Monday, August 20, 2007 6:07 PM To: freebsd-questions@freebsd.org Subject: IPFW Questions. Hi all, I was wondering what the concensus is on using dynamic rules in IPFW. Every once in a while, I suppose there is a DoS attaclk that causes me to see hundreds of: +ipfw: install_state: Too many dynamic rules in my security log. I am sure i read somewhere that many people are skipping the dynamic rules and just relying on the line by line rules. You thoughts please. Any while your up, does anyone really know what this means? ipfw: pullup failed I dont see that often maybe 1 or 2 times a month. -Grant ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Gnome & FreeBSD
Thank you all for the suggestions. I am going to take into consideration everything everyone wrote. Michael --- "P.U.Kruppa" <[EMAIL PROTECTED]> wrote: > On Sun, 19 Aug 2007, Michael S wrote: > > > Good day all, > > > > I decided to add GUI to my GUI-less FreeBSD > machine. I > > am considering installing Gnome, which I haven't > used > > for long while and the last time was on Linux > anyway. > > The reason is that most of my favorite > applications > > use gtk libraries, like Firefox, GAIM (can't get > used > > to the new name),wxPython and others. In short I > > wanted to avoid 2 huge sets of libraries (gtk and > qt) > > by not installing KDE. > > I wanted to know how Gnome feels on FreeBSD, is it > > polished enough? Are there crashes? Any caveats at > > all? > There is a minimal gnome installation in > /usr/ports/x11/gnome2-lite > you can start with that and - if you like it - add > all the the > other stuff. > One caveat: > First install /usr/ports/x11/xorg (i.e. xorg-7.2) > and check if > your monitor and graphics card are set up correctly. > > Greetings, > > Uli. > > > > > Thanks in advance, > > Michael > > ___ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > > > > > > Peter Ulrich Kruppa > Wuppertal > Germany > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On Mon, Aug 20, 2007 at 05:15:10PM +1000, Sam Lawrance wrote: > > On 20/08/2007, at 10:47 AM, Jerry McAllister wrote: > > >On Sun, Aug 19, 2007 at 03:05:00PM +0200, Wojciech Puchar wrote: > > > >> > >>>just for reference only: > >>>Original release planned date of 7.0 was end of Jul. But now is > >>>nearly end > >>>of Aug. > >>>So Which date you guess 7.0 will be released? :D > >> > >>when it will be ready. if time is more important than quality for > >>you get > >>simply get -current. even if not - and you would like help testing > >>it, > >>fetch and report problems. > > > >There was obviously no intent to challenge or apply preasure in the > >question so you don't need to be snippy. If you don't have any > >useful > >information or at least information you think might be useful > >(qualifier > >for my posts) then don't bother replying - at least not snippy, posts. > >We can afford to be civil - expecially when a civil question is asked. > > > >The person was just noting that the old guesses were no longer > >operable > >and hoping that some new best guesses might have been made. We all > >know these dates are very movable and for very good reasons. No > >one is > >pushing for low quality, hurried up junk. But those best guesses by > >people in the know about how the processes if moving along are helpful > >for those of use out here in the hinterland trying to make it through > >each day. > > There was nothing snippy in that post, it was just succinct. By now, > people in the know have learned that it really will be done "when > it's done". > Read it from the point of view of a person who is not an insider and is seeking a little help in keeping their FreeBSD life together. When someone asks for a "guess" and the response sounds more like 'get out of my face' than anything with useful content, it is snippy. I could have used a stronger term. As I said, we know and even newbies can learn, with considerate explanitory responses, that no absolute date can realistically be named - that there is justifiably more concern about quality than making a particular 'release date'. But some running info on how it is going is helpful - actually reassuring, to those of us out of the loop. It needn't be anything elaborate. Anyway, the important issue here is refusing to consider the effects of the response when replying to a posted question, even when it is a somewhat unenlightened question. jerry ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Trying to move /usr
Good morning everyone, I am trying to migrate my /usr to a newly installed SCSI drive. Up until yesterday I had /, /var, /usr on a 5 Gig drive and my /home was on another 60 Gig drive, which was fine because it had no GUI and functioned mostly as a server. Last night I added a third drive, with a capacity around 18G; since my other two drives are hard-wired in /boot/device.hints, there were no problems with device numbering. I wrote down the device name (/dev/da2) and proceeded to sysinstall to first create a FreeBSD partition and then the only slice within that partition. I named it /user. I then tarred up /usr Tar cf /user/usr.tar /usr Extracted the tar file and moved everything one directory up, because otherwise everything were under /user/usr. I made the necessary adjustnments in /etc/fstab, that is I switched /usr and /user around. After reboot, I wasnt getting the prompt, since the binaries for displaying the prompt are located under /usr/bin (or /usr/sbin?) and my guess was that /usr wasnt mounting properly. I restarted the machine, this time going into single user mode. Trying to mount a gave me an error message: Error mounting /usr/home. I then created home directory under the new /usr, I tried mount a, this time it worked, but when I rebooted, I wasnt getting my home directory. When I login as an unprivileged user michael, the message is something like: User has no home directory. For now I reverted to using the old /usr. Anyone attempted to migrate /usr and fell for similar kind of problems? Any suggestions will be appreciated. P.S. I am not next to that machine right now, so I cant provide the exact fstab or dmesg output. Thanks in advance, Michael ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
Dan Nelson wrote: In the last episode (Aug 19), Erik Norgaard said: No so fast now, after reading this I thought I'd give it a try, updated the source, buildworld then buildkernel. at installkernel i got a lot of error lines like this kldxref: file isn't dynamically-linked kldxref: file isn't dynamically-linked kldxref: file isn't dynamically-linked kldxref: file isn't dynamically-linked no idea which file it was. And booting I booted straight into gdb. (ddb I assume, not gdb?) Those are warnings, not errors, due to the installkernel running a 6.x kldxref on a 7.x kernel. Your boot problem is unrelated, and could be due to missing drivers for whatever your boot device is. OK thanks, I have previously tried booting a (older) 7-CURRENT kernel without problems, and never seen the above error, so my first conclusion was that the two were linked. Cheers, Erik -- Ph: +34.666334818 web: http://www.locolomo.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On Aug 20, 2007, at 9:52 AMAug 20, 2007, Jerry McAllister wrote: [snip] As I said, we know and even newbies can learn, with considerate explanitory responses, that no absolute date can realistically be named - that there is justifiably more concern about quality than making a particular 'release date'. But some running info on how it is going is helpful - actually reassuring, to those of us out of the loop. It needn't be anything elaborate. Anyway, the important issue here is refusing to consider the effects of the response when replying to a posted question, even when it is a somewhat unenlightened question. IMHO, I think it would be a benefit to the community if there were a page up on the FreeBSD website that explained the release process and at least some sort of clue as to what people can expect regarding the next coming release. As many long-time FreeBSDers know, there are these pages up there, but I don't feel their new-user friendly, and they certainly are a PITA to find at times. I'm not suggesting we lay out a strict timeline, as I'd much prefer the releases when they're ready, but simply a page saying, 'Hey, FreeBSD x.y release is coming soon, we're currently working on 'blah.'' I'd even be willing to help out if needed. - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
At 10:10 AM 8/20/2007, Michael S wrote: Good morning everyone, I am trying to migrate my /usr to a newly installed SCSI drive. Up until yesterday I had /, /var, /usr on a 5 Gig drive and my /home was on another 60 Gig drive, which was fine because it had no GUI and functioned mostly as a server. Last night I added a third drive, with a capacity around 18G; since my other two drives are hard-wired in /boot/device.hints, there were no problems with device numbering. I wrote down the device name (/dev/da2) and proceeded to sysinstall to first create a FreeBSD partition and then the only slice within that partition. I named it /user. I then tarred up /usr Tar cf /user/usr.tar /usr Extracted the tar file and moved everything one directory up, because otherwise everything were under /user/usr. I made the necessary adjustnments in /etc/fstab, that is I switched /usr and /user around. After reboot, I wasnt getting the prompt, since the binaries for displaying the prompt are located under /usr/bin (or /usr/sbin?) and my guess was that /usr wasnt mounting properly. I restarted the machine, this time going into single user mode. Trying to mount a gave me an error message: Error mounting /usr/home. I then created home directory under the new /usr, I tried mount a, this time it worked, but when I rebooted, I wasnt getting my home directory. When I login as an unprivileged user michael, the message is something like: User has no home directory. For now I reverted to using the old /usr. Anyone attempted to migrate /usr and fell for similar kind of problems? Any suggestions will be appreciated. P.S. I am not next to that machine right now, so I cant provide the exact fstab or dmesg output. Thanks in advance, Michael When you un-tarred did you use -p to be sure the perms were all correct? -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On Mon, Aug 20, 2007 at 11:10:12AM -0400, Michael S wrote: > Good morning everyone, > > I am trying to migrate my /usr to a newly installed > SCSI drive. Up until yesterday I had /, /var, /usr on > a 5 Gig drive and my /home was on another 60 Gig > drive, which was fine because it had no GUI and > functioned mostly as a server. > > Last night I added a third drive, with a capacity > around 18G; since my other two drives are hard-wired > in /boot/device.hints, there were no problems with > device numbering. I wrote down the device name > (/dev/da2) and proceeded to sysinstall to first create > a FreeBSD partition and then the only slice within > that partition. I named it /user. You have that backwards. You created one slice on the disk and one partition within that slice. Minor thing, but can confuse communication. > I then tarred up /usr > Tar cf /user/usr.tar /usr > > Extracted the tar file and moved everything one > directory up, because otherwise everything were under > /user/usr. > > I made the necessary adjustnments in /etc/fstab, that > is I switched /usr and /user around. I am not completely sure just what you mean by 'moved one directory up' and 'switched /usr and /user around'. It sounds an awful lot like you are saying you modified /etc/fstab to mount this new partition (probably /dev/da2s1a, though the 'a' might be something else) as /user instead of /user/usr. But, the new partition needs to be mounted as /usr > After reboot, I wasnt getting the prompt, since the > binaries for displaying the prompt are located under > /usr/bin (or /usr/sbin?) and my guess was that /usr > wasnt mounting properly. I restarted the machine, > this time going into single user mode. Trying to mount > a gave me an error message: Error mounting /usr/home. > I then created home directory under the new /usr, I > tried mount a, this time it worked, but when I > rebooted, I wasnt getting my home directory. When I > login as an unprivileged user michael, the message > is something like: User has no home directory. > > For now I reverted to using the old /usr. > > Anyone attempted to migrate /usr and fell for similar > kind of problems? Any suggestions will be appreciated. > > P.S. I am not next to that machine right now, so I > cant provide the exact fstab or dmesg output. I guess we need the actual /etc/fstab to be sure just what has been done. Maybe also some dmesg output that shows the disk devices could be useful too. jerry > > Thanks in advance, > Michael > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Configuring OpenLDAP on FreeBSD 6.2 Release, Problems.
Hi All, I am a newcomer to the FreeBSD world. I am trying to implement a openLDAP installation. It all went ok with the SASL and SERVER install in conjunction with BDB, yet when I try starting the service using "/usr/local/libexec/slapd" or "/usr/local/etc/rc.d/slapd start", the service does not start. I checked "ps -axww | grep slapd" and nothing is showing. After checking "cat /var/log/debug.log" I can see the following output in stdout. Aug 20 10:16:10 sce2 slapd[71803]: @(#) $OpenLDAP: slapd 2.4.3alpha (Oct 18 2006 03:27:53) $[EMAIL PROTECTED]:/work/a/ports/net/openldap24-server/work/openldap-2.4.3alpha/servers/slapdAug 20 10:16:10 sce2 slapd[71803]: connections_destroy: nothing to destroy.Aug 20 10:16:10 sce2 slapd[71803]: slapd stopped. Can some one provide me a way to troubleshoot this issue of the service. Thanks in advance. FreeBSD sce2.USA.com 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Wed Aug 15 12:07:32 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMD64KERNEL amd64 _ See what you’re getting into…before you go there http://newlivehotmail.com/?ocid=TXT_TAGHM_migration_HM_viral_preview_0507___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
The problem of connection between Windows and FreeBSD when using IPSec transport.
Hi, On one side there's FreeBSD 6.2, ipsec-tools-0.6.7; on the other Windows 2003 Server. If I start pinging under Windows everything works ok, C:\Documents and Settings>ping 111.111.111.2 Pinging 111.111.111.2 with 32 bytes of data: Negotiating IP Security. Reply from 111.111.111.2: bytes=32 time<1ms TTL=63 Reply from 111.111.111.2: bytes=32 time<1ms TTL=63 /var/log/racoon.log 2007-08-17 12:10:18: INFO: @(#)ipsec-tools 0.6.7 (http://ipsec-tools.sourceforge.net) 2007-08-17 12:10:18: INFO: @(#)This product linked OpenSSL 0.9.7e-p1 25 Oct 2004 (http://www.openssl.org/) 2007-08-17 12:10:18: INFO: 111.111.111.2[500] used as isakmp port (fd=5) 2007-08-17 12:29:16: INFO: respond new phase 1 negotiation: 111.111.111.2[500]<=>111.111.111.1[500] 2007-08-17 12:29:16: INFO: begin Identity Protection mode. 2007-08-17 12:29:16: INFO: received broken Microsoft ID: MS NT5 ISAKMPOAKLEY 2007-08-17 12:29:16: INFO: received Vendor ID: FRAGMENTATION 2007-08-17 12:29:16: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02 2007-08-17 12:29:16: INFO: ISAKMP-SA established 111.111.111.2[500]-111.111.111.1[500] spi:ceb3ba2040683da6:f80fc5ab1e3d931e 2007-08-17 12:29:16: INFO: respond new phase 2 negotiation: 111.111.111.2[0]<=>111.111.111.1[0] 2007-08-17 12:29:16: INFO: IPsec-SA established: ESP/Transport 111.111.111.1[0]->111.111.111.2[0] spi=36304726(0x229f756) 2007-08-17 12:29:16: INFO: IPsec-SA established: ESP/Transport 111.111.111.2[0]->111.111.111.1[0] spi=3194585143(0xbe698037) >From FreeBSD: # ping 111.111.111.1 PING 111.111.111.1 (111.111.111.1): 56 data bytes 64 bytes from 111.111.111.1: icmp_seq=6 ttl=127 time=0.526 ms 64 bytes from 111.111.111.1: icmp_seq=7 ttl=127 time=6.382 ms and ping works for 2 sides. But if I initiate ping under FreeBSD (after restart racoon daemon), # ping 111.111.111.1 PING 111.111.111.1 (111.111.111.1): 56 data bytes ^C --- 111.111.111.1 ping statistics --- 5 packets transmitted, 0 packets received, 100% packet loss I see in the log the following: 2007-08-17 12:44:16: INFO: @(#)ipsec-tools 0.6.7 (http://ipsec-tools.sourceforge.net) 2007-08-17 12:44:16: INFO: @(#)This product linked OpenSSL 0.9.7e-p1 25 Oct 2004 (http://www.openssl.org/) 2007-08-17 12:44:16: INFO: 111.111.111.2[500] used as isakmp port (fd=5) 2007-08-17 12:44:21: INFO: IPsec-SA request for 111.111.111.1 queued due to no phase1 found. 2007-08-17 12:44:21: INFO: initiate new phase 1 negotiation: 111.111.111.2[500]<=>111.111.111.1[500] 2007-08-17 12:44:21: INFO: begin Identity Protection mode. 2007-08-17 12:44:21: INFO: received broken Microsoft ID: MS NT5 ISAKMPOAKLEY 2007-08-17 12:44:21: INFO: received Vendor ID: FRAGMENTATION 2007-08-17 12:44:21: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02 2007-08-17 12:44:21: INFO: ISAKMP-SA established 111.111.111.2[500]-111.111.111.1[500] spi:94372eb384516aef:bccacea73409cfc6 2007-08-17 12:44:22: INFO: initiate new phase 2 negotiation: 111.111.111.2[0]<=>111.111.111.1[0] 2007-08-17 12:44:22: ERROR: unknown notify message, no phase2 handle found. 2007-08-17 12:44:38: ERROR: 111.111.111.1 give up to get IPsec-SA due to time up to wait. 2007-08-17 12:45:21: INFO: ISAKMP-SA expired 111.111.111.2[500]-111.111.111.1[500] spi:94372eb384516aef:bccacea73409cfc6 2007-08-17 12:45:21: ERROR: unknown Informational exchange received. 2007-08-17 12:45:22: INFO: ISAKMP-SA deleted 111.111.111.2[500]-111.111.111.1[500] spi:94372eb384516aef:bccacea73409cfc6 My configs: # cat /etc/ipsec.conf spdadd 111.111.111.2 111.111.111.1 any -P out ipsec esp/transport//require; spdadd 111.111.111.1 111.111.111.2 any -P in ipsec esp/transport//require; path pre_shared_key "/usr/local/etc/racoon/psk.txt" ; log notify; padding { maximum_length 20; randomize off; strict_check off; exclusive_tail off; } timer { counter 5; # maximum trying count to send. interval 20 sec; # maximum interval to resend. persend 1; # the number of packets per a send. phase1 30 sec; phase2 15 sec; } remote anonymous { # exchange_mode aggressive,main; exchange_mode main, base; doi ipsec_doi; situation identity_only; nonce_size 16; lifetime time 1 min; # sec, min, hour initial_contact on; support_proxy on; proposal_check obey; # obey, strict or claim proposal { encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key ; dh_group 2 ; } } sainfo anonymous { pfs_group 1; lifetime time 36000 sec; encryption_algorithm 3des,des,cast128,blowfish ; authentication_algorithm hmac_sha1,hmac_md5; compression_algorithm deflate ; } What do I have to change in conf files, to make IPSec properly work no matter from which server I initiate the connection? Thank you for any answers. -- BRGDS. Alesha ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any
Re: Trying to move /usr
Jerry, *** When I untarred the file I had everything under /user/usr. I was under /user/usr and then I did mv * .. I then edited fstab and changed /dev/da2s1d to be /usr, instead of /user And of course the old /usr I switched to /user Thanks in advance --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > On Mon, Aug 20, 2007 at 11:10:12AM -0400, Michael S > wrote: > > > Good morning everyone, > > > > I am trying to migrate my /usr to a newly > installed > > SCSI drive. Up until yesterday I had /, /var, /usr > on > > a 5 Gig drive and my /home was on another 60 Gig > > drive, which was fine because it had no GUI and > > functioned mostly as a server. > > > > Last night I added a third drive, with a capacity > > around 18G; since my other two drives are > hard-wired > > in /boot/device.hints, there were no problems with > > device numbering. I wrote down the device name > > (/dev/da2) and proceeded to sysinstall to first > create > > a FreeBSD partition and then the only slice within > > that partition. I named it /user. > > You have that backwards. You created one slice on > the disk > and one partition within that slice. Minor thing, > but can > confuse communication. > > > I then tarred up /usr > > Tar cf /user/usr.tar /usr > > > > Extracted the tar file and moved everything one > > directory up, because otherwise everything were > under > > /user/usr. > > > > I made the necessary adjustnments in /etc/fstab, > that > > is I switched /usr and /user around. > > I am not completely sure just what you mean by > 'moved one directory up' > and 'switched /usr and /user around'. > It sounds an awful lot like you are saying you > modified /etc/fstab to mount > this new partition (probably /dev/da2s1a, though > the 'a' might be > something else) as /user instead of /user/usr. > > But, the new partition needs to be mounted as /usr > > > > After reboot, I wasnt getting the prompt, since > the > > binaries for displaying the prompt are located > under > > /usr/bin (or /usr/sbin?) and my guess was that > /usr > > wasnt mounting properly. I restarted the machine, > > this time going into single user mode. Trying to > mount > > a gave me an error message: Error mounting > /usr/home. > > I then created home directory under the new /usr, > I > > tried mount a, this time it worked, but when I > > rebooted, I wasnt getting my home directory. When > I > > login as an unprivileged user michael, the > message > > is something like: User has no home directory. > > > > For now I reverted to using the old /usr. > > > > Anyone attempted to migrate /usr and fell for > similar > > kind of problems? Any suggestions will be > appreciated. > > > > P.S. I am not next to that machine right now, so I > > cant provide the exact fstab or dmesg output. > > I guess we need the actual /etc/fstab to be sure > just what > has been done. Maybe also some dmesg output that > shows the > disk devices could be useful too. > > jerry > > > > > Thanks in advance, > > Michael > > ___ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > > > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Regular expressions
Written by Christer Hermansson on 08/18/07 18:08>> Derek Ragona wrote: At 12:04 PM 8/18/2007, Christer Hermansson wrote: I also found some basic example at http://www.grymoire.com/Unix/Sh.html#uh-88 : 8<8<8<8<8< #!/bin/sh echo "Type in a number" read ans number=`expr "$ans" : "([0-9]*)"` if [ "$number" != "$ans" ]; then echo "Not a number" elif [ "$number" -eq 0 ]; then echo "Nothing was typed" else echo "$number is a fine number" fi 8<8<8<8<8< The above example doesn't work on my freebsd box. Maybe I need to update my system, sitting with 6.0R which never been updated. You have a syntax error using expr. Do a man on expr for more details but if you change that line from: number=`expr "$ans" : "([0-9]*)"` to: number=`expr "$ans" : "\([0-9]*\)"` You will get the desired results. Also when debugging scripts remember to add: set -x to your script on the second line, and see what the script lines are actually doing. -Derek Thanks Derek ! Now both the example and my own code works for me. I changed my code from "^[A-Za-z0-9_-]+$" to "\([A-Za-z0-9_-]*\)" It seems that FreeBSD's expr want some different syntax than the webbased test tool at http://regexlib.com/RETester.aspx No, your expression is double quoted, which means the shell will expand it before passing it to expr. Parens are expanded by shells, they manipulate the order of operations (i.e. 'echo 1 || echo 2 && echo 3' vs. '(echo 1 || echo 2) && echo 3'). As a result, you must escape the parens or the shell will gobble them up. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hello!
[EMAIL PROTECTED] wrote: On 17/08/07, Adam J Richardson <[EMAIL PROTECTED]> wrote: Branko Vukelic wrote: Hi, My name is Branko (a.k.a. FoxBunny in some circles). Until recently I was a Arch Linux user, and decided to give FreeBSD a try, for a better desktop experience. Thanks to the DesktopBSD project (BIG THANKS!) I'm now running FreeBSD on my box (or is it proper to call DesktopBSD a FreeBSD?). I must say I am most impressed by how all this works, from development to final touches, to actually running and using it. I'm looking forward to getting involved in the whole BSD scene. Nice meeting (sort of) you all! Best regards, Branko Hi Branko! I guess it's like comparing an Alsatian [FreeBSD] to a Spaniel [DesktopBSD]: they're very different, but both are still dogs. However NetBSD is a cat and Windows is a fish. Feel free to play with my sophisticated model of operating system development, anyone. Maybe I shouldn't have compared FreeBSD to a dog. Whoops. Sorry all. If netbsd is a cat, and oh!ess!ten is variously a panther, tiger, puma, (pard? olestra?), openbsd is a fish (and some damned anthropomorphic lips), probably freebsd is really a 1938 pontiac, and windows is a cow-duck hybrid with post-it notes stapled to its spine (or maybe that transporter accident from Star Trek: Der Movin' Picture!). From a pilot's point of view: FreeBSD is an F-4 Phantom. Mac is a P-38 Trainer. Windows is a DC-10. Grins, ZWH ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Regular expressions
Written by Reid Linnemann on 08/20/07 11:58>> Written by Christer Hermansson on 08/18/07 18:08>> Derek Ragona wrote: At 12:04 PM 8/18/2007, Christer Hermansson wrote: I also found some basic example at http://www.grymoire.com/Unix/Sh.html#uh-88 : 8<8<8<8<8< #!/bin/sh echo "Type in a number" read ans number=`expr "$ans" : "([0-9]*)"` if [ "$number" != "$ans" ]; then echo "Not a number" elif [ "$number" -eq 0 ]; then echo "Nothing was typed" else echo "$number is a fine number" fi 8<8<8<8<8< The above example doesn't work on my freebsd box. Maybe I need to update my system, sitting with 6.0R which never been updated. You have a syntax error using expr. Do a man on expr for more details but if you change that line from: number=`expr "$ans" : "([0-9]*)"` to: number=`expr "$ans" : "\([0-9]*\)"` You will get the desired results. Also when debugging scripts remember to add: set -x to your script on the second line, and see what the script lines are actually doing. -Derek Thanks Derek ! Now both the example and my own code works for me. I changed my code from "^[A-Za-z0-9_-]+$" to "\([A-Za-z0-9_-]*\)" It seems that FreeBSD's expr want some different syntax than the webbased test tool at http://regexlib.com/RETester.aspx No, your expression is double quoted, which means the shell will expand it before passing it to expr. Parens are expanded by shells, they manipulate the order of operations (i.e. 'echo 1 || echo 2 && echo 3' vs. '(echo 1 || echo 2) && echo 3'). As a result, you must escape the parens or the shell will gobble them up. Disregard that, I am a moron. :/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On 20/08/07, Michael S <[EMAIL PROTECTED]> wrote: > Jerry, > > *** When I untarred the file I had everything under > /user/usr. I was under /user/usr and then I did mv * > .. > > I then edited fstab and changed > /dev/da2s1d to be /usr, instead of /user > > And of course the old /usr I switched to /user So is your /usr now under /usr/usr? What I have done is: # mkdir /mnt/usr # mount /dev/whatever /mnt/usr # cd /mnt/usr # dump -L -f - /usr | restore -r -f - And then edit your /etc/fstab to reflect the changes and reboot. -- -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 6.2-RELEASE-p7 box crashing
,--[ On Mon, Aug 20, 2007 at 07:33:05AM -0500, Eric Crist wrote: | Sorry to reply again so soon, but I failed to read through your | attachment before sending my previous message. I notice that your | system seems to have crashed at least a few times during the loading | of PowerDNS. Immediately before, there's a warning about the | variables in /etc/rc.conf: Sometimes, it also crashed when I restarted 'avahi-daemon'. | | Aug 20 15:50:43 chatteau root: /etc/rc: WARNING: $pdnsd_enable is not | set properly - see rc.conf(5). I've installed pdns and pdns-recursor, but I'm using pdns-recursor only, and $pdnsd_enable is set to "no". And I'm running this setup since June, 2007. | | Also, have you tried booting with ACPI disabled? I know there are | still some systems out there that don't quite work the way they ought | to. No, I've not tried that. But, to me, it looks like filesystem is bad, and some of the files in use by services like avahi, pdns are corrupt, so thats why it is crashing. Is there any possiblity like such ? Anyways, I'll boot with ACPI disabled, or even boot in single-user mode, and repair my filesystem first. | | - | Eric F Crist | Secure Computing Networks | | Thanks Ashish Shukla -- Ashish Shukla "Wah Java !!" आशीष शुक्ल weblog: http://wahjava.wordpress.com/ ,= ,-_-. =. | The desire to be rewarded for one's creativity does | ((_/)o o(\_)) | not justify depriving the world in general of all or | `-'(. .)`-' | part of that creativity. | \_/ |- Richard M. Stallman | pgpi1NZ0ui2aX.pgp Description: PGP signature
Re: Trying to move /usr
I reverted to the old /usr. What I had done: Initially I set up the newly installed drive (da2) to have only one partition (da2s1d) which I chose to be /user (note the e). I tarred /usr to a file in /user tar -cf /user/usr.tar /tar and extracted the file tar -xf usr.tar I had the whole structure of /usr underneath /user/usr And then cd usr mv * .. to have everything under /user Then I edited fstab. Whatever was /user became /usr and /usr became /user. I will definitely try dump. Never used it before. Thanks a lot, Michael --- "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > On 20/08/07, Michael S <[EMAIL PROTECTED]> wrote: > > Jerry, > > > > *** When I untarred the file I had everything > under > > /user/usr. I was under /user/usr and then I did mv > * > > .. > > > > I then edited fstab and changed > > /dev/da2s1d to be /usr, instead of /user > > > > And of course the old /usr I switched to /user > > So is your /usr now under /usr/usr? > > What I have done is: > # mkdir /mnt/usr > # mount /dev/whatever /mnt/usr > # cd /mnt/usr > # dump -L -f - /usr | restore -r -f - > And then edit your /etc/fstab to reflect the changes > and reboot. > > -- > -- > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Veritas Backup Exec on Freebsd 6.1 (Boon Keng Lee)
Hi, Please kindly advise us can the FreeBSD 6.1 being backup via Veritas Backup Exec 11d Server for Windows with the Linux Client agent ? Thank for the help. ~~ Hi, On our side, we didn't manage to make this happen using the regular linux agent that veritas (now Symantec) provides, but we were able to install the legacy unix agent which works like a charm. We take full and incremental backups without problem. Regards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
/compat/linux/usr/bin/ld
Hello, What is the recommended way for obtaining linux ld binary (/compat/linux/usr/bin/ld)? I found in the archives that devel/linux_devel port used to provide it, but it seems that there is no such port now, except emulators/linux*-gentoo*. Thank you, Nikola Lečić ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Trying to move /usr
This makes perfect sense, are you still having issues with your restore? > Date: Mon, 20 Aug 2007 13:37:56 -0400> From: [EMAIL PROTECTED]> To: [EMAIL > PROTECTED]; freebsd-questions@freebsd.org> CC: > Subject: Re: Trying to move > /usr> > I reverted to the old /usr.> What I had done:> Initially I set up the > newly installed drive (da2)> to have only one partition (da2s1d) which I > chose to> be /user (note the e).> I tarred /usr to a file in /user> tar -cf > /user/usr.tar /tar> > and extracted the file> tar -xf usr.tar> I had the > whole structure of /usr underneath /user/usr> > And then> cd usr> mv * ..> > > to have everything under /user> > Then I edited fstab. Whatever was /user > became /usr> and /usr became /user.> > I will definitely try dump. Never used > it before.> > Thanks a lot,> Michael> > --- "[EMAIL PROTECTED]" <[EMAIL > PROTECTED]> wrote:> > > On 20/08/07, Michael S <[EMAIL PROTECTED]> wrote:> > > > Jerry,> > >> > > *** When I untarred the file I had everything> > under> > > > /user/usr. I was under /user/usr and then I did mv> > *> > > ..> > >> > > I > then edited fstab and changed> > > /dev/da2s1d to be /usr, instead of /user> > > >> > > And of course the old /usr I switched to /user> > > > So is your > /usr now under /usr/usr?> > > > What I have done is:> > # mkdir /mnt/usr> > # > mount /dev/whatever /mnt/usr> > # cd /mnt/usr> > # dump -L -f - /usr | > restore -r -f -> > And then edit your /etc/fstab to reflect the changes> > > and reboot.> > > > -- > > --> > > > > ___> > freebsd-questions@freebsd.org mailing list> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions> To unsubscribe, > send any mail to "[EMAIL PROTECTED]" _ Learn. Laugh. Share. Reallivemoms is right place! http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: FreeBSD 6.2-RELEASE-p7 box crashing
> Date: Mon, 20 Aug 2007 22:49:47 +0530> From: [EMAIL PROTECTED]> To: > FreeBSD-Questions@FreeBSD.ORG> CC: > Subject: Re: FreeBSD 6.2-RELEASE-p7 box > crashing> > ,--[ On Mon, Aug 20, 2007 at 07:33:05AM -0500, Eric Crist wrote:> > | Sorry to reply again so soon, but I failed to read through your > | > attachment before sending my previous message. I notice that your > | system > seems to have crashed at least a few times during the loading > | of > PowerDNS. Immediately before, there's a warning about the > | variables in > /etc/rc.conf:> It would be interesting to see your logs and the content of rc.conf, it would provide us a better idea on what is happening. > Sometimes, it also crashed when I restarted 'avahi-daemon'.> > | > | Aug 20 > 15:50:43 chatteau root: /etc/rc: WARNING: $pdnsd_enable is not > | set > properly - see rc.conf(5).> > I've installed pdns and pdns-recursor, but I'm > using pdns-recursor> only, and $pdnsd_enable is set to "no". And I'm running > this setup since> June, 2007.> Has the package been running stable since then, what changes have you done to it. Upgrade, patching or have you had any file system corruption. Let us know. > | > | Also, have you tried booting with ACPI disabled? I know there are > | > still some systems out there that don't quite work the way they ought > | > to.> > No, I've not tried that. But, to me, it looks like filesystem is bad,> > and some of the files in use by services like avahi, pdns are corrupt,> so > thats why it is crashing. Is there any possiblity like such ?> Anyways, I'll > boot with ACPI disabled, or even boot in single-user mode,> and repair my > filesystem first.> It makes sence to drop into single user and check your file system to see if there is anything wrong with them, specially the one that is holding the package/port and the data of such. Come back and let us know, don't forget to check the loggin section of that package, that could provide you with some good hints, > | > | -> | Eric F Crist> | Secure Computing Networks> | > | > > Thanks> > Ashish Shukla> -- > Ashish Shukla "Wah Java !!"> आशीष शुक्ल> > weblog: > http://wahjava.wordpress.com/> > ,= ,-_-. =. | The desire to be rewarded for > one's creativity does |> ((_/)o o(\_)) | not justify depriving the world in > general of all or |> `-'(. .)`-' | part of that creativity. |> \_/ | - > Richard M. Stallman |> _ Messenger Café — open for fun 24/7. Hot games, cool activities served daily. Visit now. http://cafemessenger.com?ocid=TXT_TAGLM_AugWLtagline___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: cheap (supported) wifi card
Don, I notice a earlier poster mentioned > > work very well with ndisgen. I think you've been misled. That means you have to go thru several manual steps to smash the windows drivers into something freebsd can use. Ugly, in my opinion. If you want it to work 'out of the box', go back and buy a card with a prisim/orinoco or atheros chipset. If you want to make your existing dongle work, look for ndisgen in the handbook in the 'wireless networking' section. Steve On 8/16/07, Don Hinton <[EMAIL PROTECTED]> wrote: > Hi Adam: > > Adam J Richardson writes: > > Don Hinton wrote: > > > Could someone recommend a good (and > > > cheap) one that's includes a/b/g*/n and is supported, either natively > > > or via ndis? > > > > Hi Don, > > > > I can heartily recommend any card based on the TNET1130 chipset. They > > work very well with ndisgen. Examples include the Add-on Tech GWP-100 > > and the Belkin F5D7 series, such as the F5D7051 USB key or the F5D7000 > > cardbus card. They're all cheap. They do "a", "b" and "g". I'm not sure > > about "n", though. > > I picked up a Belkin F5D7050, but can seem to figure out how to get it > to work. I'm obviously missing something. > > $ dmesg > > ugen0: on uhub6 > > $ uname -a > FreeBSD localhost 7.0-CURRENT FreeBSD 7.0-CURRENT #5: Mon Aug 13 16:23:35 UTC > 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HP_SMP i386 > > I've compiled the following in my kernel, per man ural: > > device wlan# 802.11 support > device wlan_amrr # AMRR transmit rate control algorithm > device uhci# UHCI PCI->USB interface > device ohci# OHCI PCI->USB interface > device ehci# EHCI PCI->USB interface (USB 2.0) > device usb # USB Bus (required) > device ural# Ralink Technology RT2500USB wireless NICs > > But don't see a ural device getting created. It's hard to tell from > the package, but I suspect it's a version problem. There's a small > sticker on the bottom of the box that has "00173FAFD030 ver. 4000" > printed on it. But the part number just says FD7050. > > Any help would be appreciated. > > thanks... > don > -- > Don Hinton > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > -- Steve Franks, KE7BTE Staff Engineer La Palma Devices, LLC http://www.lapalmadevices.com (520) 312-0089 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On Aug 20, 2007, at 2:18 PMAug 20, 2007, Josh Carroll wrote: I'm not suggesting we lay out a strict timeline, as I'd much prefer the releases when they're ready, but simply a page saying, 'Hey, FreeBSD x.y release is coming soon, we're currently working on 'blah.'' Something more than what's here then? http://www.freebsd.org/releng/ Yes. Especially for people who aren't savvy to the mailing lists, that page contains virtually NO useful information. TBA is only useful if, at some point, it actually is announced. In addition, please point out to me if I'm wrong, there's no easy/readily- identifiable way to get to that page. RELENG isn't what I'd consider a user-friendly word. Really, I think my little rant here is more of a customer-service and marketing issue. So many people get upset when someone posts the "when's the next release" question, but there's really no end-user digestible information anywhere for those individuals to help themselves. Again, just my $.02. - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On Mon, Aug 20, 2007 at 12:08:06PM -0400, Michael S wrote: > Jerry, > > *** When I untarred the file I had everything under > /user/usr. I was under /user/usr and then I did mv * > .. > > I then edited fstab and changed > /dev/da2s1d to be /usr, instead of /user > > And of course the old /usr I switched to /user Well, that sounds like the right way. except that I would have done cd / mv /usr/usr /usr That has worked for me in the past similar situations. Since you say you have switched back - I presume by editing /etc/fstab - have you checked the contents of /user which should be the new copy of /usr to make sure it looks right - matches the old one pretty well? jerry > > Thanks in advance > --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > > > On Mon, Aug 20, 2007 at 11:10:12AM -0400, Michael S > > wrote: > > > > > Good morning everyone, > > > > > > I am trying to migrate my /usr to a newly > > installed > > > SCSI drive. Up until yesterday I had /, /var, /usr > > on > > > a 5 Gig drive and my /home was on another 60 Gig > > > drive, which was fine because it had no GUI and > > > functioned mostly as a server. > > > > > > Last night I added a third drive, with a capacity > > > around 18G; since my other two drives are > > hard-wired > > > in /boot/device.hints, there were no problems with > > > device numbering. I wrote down the device name > > > (/dev/da2) and proceeded to sysinstall to first > > create > > > a FreeBSD partition and then the only slice within > > > that partition. I named it /user. > > > > You have that backwards. You created one slice on > > the disk > > and one partition within that slice. Minor thing, > > but can > > confuse communication. > > > > > I then tarred up /usr > > > Tar cf /user/usr.tar /usr > > > > > > Extracted the tar file and moved everything one > > > directory up, because otherwise everything were > > under > > > /user/usr. > > > > > > I made the necessary adjustnments in /etc/fstab, > > that > > > is I switched /usr and /user around. > > > > > > I am not completely sure just what you mean by > > 'moved one directory up' > > and 'switched /usr and /user around'. > > It sounds an awful lot like you are saying you > > modified /etc/fstab to mount > > this new partition (probably /dev/da2s1a, though > > the 'a' might be > > something else) as /user instead of /user/usr. > > > > But, the new partition needs to be mounted as /usr > > > > > > > After reboot, I wasnt getting the prompt, since > > the > > > binaries for displaying the prompt are located > > under > > > /usr/bin (or /usr/sbin?) and my guess was that > > /usr > > > wasnt mounting properly. I restarted the machine, > > > this time going into single user mode. Trying to > > mount > > > a gave me an error message: Error mounting > > /usr/home. > > > I then created home directory under the new /usr, > > I > > > tried mount a, this time it worked, but when I > > > rebooted, I wasnt getting my home directory. When > > I > > > login as an unprivileged user michael, the > > message > > > is something like: User has no home directory. > > > > > > For now I reverted to using the old /usr. > > > > > > Anyone attempted to migrate /usr and fell for > > similar > > > kind of problems? Any suggestions will be > > appreciated. > > > > > > P.S. I am not next to that machine right now, so I > > > cant provide the exact fstab or dmesg output. > > > > I guess we need the actual /etc/fstab to be sure > > just what > > has been done. Maybe also some dmesg output that > > shows the > > disk devices could be useful too. > > > > jerry > > > > > > > > Thanks in advance, > > > Michael > > > ___ > > > freebsd-questions@freebsd.org mailing list > > > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to > > "[EMAIL PROTECTED]" > > > > > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hello!
On Mon, Aug 20, 2007 at 10:36:03AM -0600, Old Ranger wrote: > [EMAIL PROTECTED] wrote: > >On 17/08/07, Adam J Richardson <[EMAIL PROTECTED]> wrote: > > > >>Branko Vukelic wrote: > >> > >>>Hi, > >>> > >>>My name is Branko (a.k.a. FoxBunny in some circles). Until recently I > >>>was a > >>>Arch Linux > >>>user, and decided to give FreeBSD a try, for a better desktop experience. > >>>Thanks to the DesktopBSD project (BIG THANKS!) I'm now running FreeBSD > >>>on my > >>>box (or is it proper to call DesktopBSD a FreeBSD?). > >>> > >>>I must say I am most impressed by how all this works, from development to > >>>final touches, to actually running and using it. I'm looking forward to > >>>getting involved in the whole BSD scene. > >>> > >>>Nice meeting (sort of) you all! > >>> > >>>Best regards, > >>> > >>>Branko > >>> > >>Hi Branko! > >> > >>I guess it's like comparing an Alsatian [FreeBSD] to a Spaniel > >>[DesktopBSD]: they're very different, but both are still dogs. However > >>NetBSD is a cat and Windows is a fish. > >> > >>Feel free to play with my sophisticated model of operating system > >>development, anyone. > >> > >>Maybe I shouldn't have compared FreeBSD to a dog. Whoops. Sorry all. > >> > > > >If netbsd is a cat, and oh!ess!ten is variously a panther, tiger, > >puma, (pard? olestra?), openbsd is a fish (and some damned > >anthropomorphic lips), probably freebsd is really a 1938 > >pontiac, and windows is a cow-duck hybrid with post-it notes > >stapled to its spine (or maybe that transporter accident from > >Star Trek: Der Movin' Picture!). > > > > > From a pilot's point of view: > FreeBSD is an F-4 Phantom. > Mac is a P-38 Trainer. > Windows is a DC-10. (with a hydraulic leak) jerry > > Grins, > > ZWH > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
> I'm not suggesting we lay out a strict timeline, as I'd much prefer > the releases when they're ready, but simply a page saying, 'Hey, > FreeBSD x.y release is coming soon, we're currently working on 'blah.'' Something more than what's here then? http://www.freebsd.org/releng/ Josh ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On Aug 20, 2007, at 2:18 PMAug 20, 2007, Josh Carroll wrote: I'm not suggesting we lay out a strict timeline, as I'd much prefer the releases when they're ready, but simply a page saying, 'Hey, FreeBSD x.y release is coming soon, we're currently working on 'blah.'' Something more than what's here then? http://www.freebsd.org/releng/ Yes. Especially for people who aren't savvy to the mailing lists, that page contains virtually NO useful information. TBA is only useful if, at some point, it actually is announced. In addition, please point out to me if I'm wrong, there's no easy/readily- identifiable way to get to that page. RELENG isn't what I'd consider a user-friendly word. Really, I think my little rant here is more of a customer-service and marketing issue. So many people get upset when someone posts the "when's the next release" question, but there's really no end-user digestible information anywhere for those individuals to help themselves. Again, just my $.02. - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On Mon, Aug 20, 2007 at 03:18:55PM -0400, Josh Carroll wrote: > > I'm not suggesting we lay out a strict timeline, as I'd much prefer > > the releases when they're ready, but simply a page saying, 'Hey, > > FreeBSD x.y release is coming soon, we're currently working on 'blah.'' > > Something more than what's here then? > > http://www.freebsd.org/releng/ > That is helpful, especially the line that says 'June 2007Start FreeBSD 7.0 Release Process' But another line or two that indicate hoped for release window that can be updated as that changes would be helpful. The next couple of lines relating to 6.x would be enough if they had a date even as loosely approximate as '2007-3Q' or 'November 2007' or some such instead of plain 'TBA' would be helpful. If if becomes apparent that November is going to slip, plug in 'January 2008' or whatever. The caveat above is clear and could even be stated more strongly if that made people taking a stab at a date feel more comfortable. jerry > > Josh ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hello!
Date: Mon, 20 Aug 2007 11:24:01 +0200 From: Branko Vukelic <[EMAIL PROTECTED]> To: Adam J Richardson <[EMAIL PROTECTED]> > If you allow me, a BSD noob, to take part... ;) I'd say FreeBSD is a wolf, and DesktopBSD is definitely a dog (as in domesticated wolf). By taming the wolf for desktop use (I'm not going into HOW that's possible) you get a system that is quite different (like an Alaskan Malaute), but still a dog, whereas DesktopBSD is still like a German Shepherd. I hope my approximation is about close? http://en.wikipedia.org/wiki/Alaskan_malamute http://en.wikipedia.org/wiki/German_shepherd As for other systems, yeah Windows is definitely a fish (if we're talking pets), and I don't find it prudent to mention Linux here. It's alien life form. :D You forgot to CC the list, Branko. :) [I wouldn't worry about noobishness. We're mostly noobs on this list anyway. There are a few gurus lurking in the shadows. As long as you show willingness to learn and don't expect others to do hold your hand while you cross the road, no one minds.] Regarding the pets analogy, I was sort of thinking we could stay on Earth for now and leave aliens for weird future operating systems like LCARS. Perhaps Linux could be a venus fly trap, or possibly a ferret? A ferret would be good, since it's more like BSD than it is like Windows. And it's also very curious. Adam J Richardson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Configuring OpenLDAP on FreeBSD 6.2 Release, Problems.
> From: [EMAIL PROTECTED]> To: freebsd-questions@freebsd.org> Subject: Re: > Configuring OpenLDAP on FreeBSD 6.2 Release, Problems.> Date: Mon, 20 Aug > 2007 22:26:26 +0200> CC: [EMAIL PROTECTED]> > On Monday 20 August 2007 17:21, > Lisandro Grullon wrote:> > Hi All,> > I am a newcomer to the FreeBSD world. I > am trying to implement a openLDAP> > installation. It all went ok with the > SASL and SERVER install in> > conjunction with BDB, yet when I try starting > the service using> > "/usr/local/libexec/slapd" or "/usr/local/etc/rc.d/slapd > start", the> > service does not start.> > This may be a very silly question, > but have you enabled slapd in /etc/rc.conf?> > The startup scripts in > /etc/rc.d and /usr/local/etc/rc.d won't run unless the > associated control > variable is set to "YES" in /etc/rc.conf. To find the > right variable and > its current setting, This is what I have added in my current rc.conf. I think it goes according to the guidelines of the Manual at openLDAP. # The following line will enable slapd and all its dependeciesslapd_enable="YES"slapd_flags='-h "ldapi://%2fvar%2frun%2fopenldap%2fldapi/ ldap://0.0.0.0/";'slapd_sockets="/var/run/openldap/ldapi" I am not 100% sure where my mistake is hence the log is not showing me anything, this is the first time for me playing with openLDAP. I am starting to worder if it has something to do with the LDIF file or configuration of the database. Throw me a bone if you have one. > > /usr/local/etc/rc.d/slapd rcvar> > which in this case tells us the control > > variable is $slapd_enable, > so /etc/rc.conf needs to contain> > > > slapd_enable="YES"> > As a bonus, if this isn't set but you want to do a > > one-off start or stop (for > example during testing), you can use onestart > > and onestop:> > /usr/local/etc/rc.d/slapd onestart> I tried following these guidelines and still getting that silly error by syslog which doesn't give a clue of where the mistake is located. This is the output of debug.log Aug 20 16:24:21 sce2 slapd[72618]: @(#) $OpenLDAP: slapd 2.4.3alpha (Oct 18 2006 03:27:53) $[EMAIL PROTECTED]:/work/a/ports/net/openldap24-server/work/openldap-2.4.3alpha/servers/slapdAug 20 16:24:21 sce2 slapd[72618]: connections_destroy: nothing to destroy.Aug 20 16:24:21 sce2 slapd[72618]: slapd stopped. I am even more confuse by this whole thing. Thanks in advance for any help you can provide me with. > which ignores the control variable.> > Jonathan _ Find a local pizza place, movie theater, and more….then map the best route! http://maps.live.com/default.aspx?v=2&ss=yp.bars~yp.pizza~yp.movie%20theater&cp=42.358996~-71.056691&style=r&lvl=13&tilt=-90&dir=0&alt=-1000&scene=950607&encType=1&FORM=MGAC01___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Error in pkg_version.. "package is corrupt"
Johan Andersson <[EMAIL PROTECTED]> writes: > Hello.. > I was running portupgrade -a . in the middle of compile i did lose power.. > now when im running pkg_version -vL= i got this: > > pkg_version: the package info for package 'GeoIP-1.4.2' is corrupt > pkg_version: the package info for package 'aide-0.11' is corrupt > pkg_version: the package info for package 'arc-5.21o_1' is corrupt > pkg_version: the package info for package 'arj-3.10.22' is corrupt > pkg_version: the package info for package 'autoconf-2.13.000227_6' is > corrupt > pkg_version: the package info for package 'autoconf-2.59_3' is corrupt > pkg_version: the package info for package 'autoconf-2.61_2' is corrupt > pkg_version: the package info for package 'autoconf-wrapper-20070404' is > corrupt > pkg_version: the package info for package 'automake-1.4.6_4' is corrupt > pkg_version: the package info for package 'automake-1.9.6_2' is corrupt > pkg_version: the package info for package 'automake-wrapper-20070404' is > corrupt > and more... > > How do i fix this without reinstall the system? You can restore the package descriptions (/var/db/pkg/*, unless you put them somewhere else) from backups. Alternatively, you could forcibly reinstall the ports. -- Lowell Gilbert, embedded/networking software engineer, Boston area http://be-well.ilk.org/~lowell/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
On 8/20/07, Jerry McAllister <[EMAIL PROTECTED]> wrote: > On Mon, Aug 20, 2007 at 03:18:55PM -0400, Josh Carroll wrote: > > > > I'm not suggesting we lay out a strict timeline, as I'd much prefer > > > the releases when they're ready, but simply a page saying, 'Hey, > > > FreeBSD x.y release is coming soon, we're currently working on 'blah.'' > > > > Something more than what's here then? > > > > http://www.freebsd.org/releng/ > > > > That is helpful, especially the line that says > 'June 2007Start FreeBSD 7.0 Release Process' > > But another line or two that indicate hoped for release window > that can be updated as that changes would be helpful. The > next couple of lines relating to 6.x would be enough if they > had a date even as loosely approximate as '2007-3Q' or 'November 2007' > or some such instead of plain 'TBA' would be helpful. If if becomes > apparent that November is going to slip, plug in 'January 2008' or > whatever. > > The caveat above is clear and could even be stated more strongly > if that made people taking a stab at a date feel more comfortable. > > jerry I'm all for this useful opinion. :) -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SAS (serial attached SCSI)
anyone running any SAS with FreeBSD? i have a client who is needing a new server, and everything in their pricerange is comming with SAS now, instead of standard SCSI. the company president is an old timer, and only knows the word "SCSI" :) other than telling him "well this is the new SCSI", i am wondering if anyone else is successfully using this technology thus far. thanks, -- Jonathan Horne http://dfwlpiki.dfwlp.org [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
At 12:37 PM 8/20/2007, Michael S wrote: I reverted to the old /usr. What I had done: Initially I set up the newly installed drive (da2) to have only one partition (da2s1d) which I chose to be /user (note the e). I tarred /usr to a file in /user tar -cf /user/usr.tar /tar and extracted the file tar -xf usr.tar I had the whole structure of /usr underneath /user/usr And then cd usr mv * .. to have everything under /user Then I edited fstab. Whatever was /user became /usr and /usr became /user. I will definitely try dump. Never used it before. Thanks a lot, Michael Michael, To use tar properly for this operation: cd /usr tar -cvf /user/usr.tar . cd /user tar -xvpf ./usr.tar Then you can switch the mount points and all should work. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Configuring OpenLDAP on FreeBSD 6.2 Release, Problems.
On Monday 20 August 2007 17:21, Lisandro Grullon wrote: > Hi All, > I am a newcomer to the FreeBSD world. I am trying to implement a openLDAP > installation. It all went ok with the SASL and SERVER install in > conjunction with BDB, yet when I try starting the service using > "/usr/local/libexec/slapd" or "/usr/local/etc/rc.d/slapd start", the > service does not start. This may be a very silly question, but have you enabled slapd in /etc/rc.conf? The startup scripts in /etc/rc.d and /usr/local/etc/rc.d won't run unless the associated control variable is set to "YES" in /etc/rc.conf. To find the right variable and its current setting, /usr/local/etc/rc.d/slapd rcvar which in this case tells us the control variable is $slapd_enable, so /etc/rc.conf needs to contain slapd_enable="YES" As a bonus, if this isn't set but you want to do a one-off start or stop (for example during testing), you can use onestart and onestop: /usr/local/etc/rc.d/slapd onestart which ignores the control variable. Jonathan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: New to Subversion - Access denied issue
Quoting gimp_user: > > I have made all repository paths owner:group www:www Permissions for subversion have always gotten to me, too. The way I usually get around my headaches is to chmod -R 777 the subversion root directory. I have not found any fallbacks to a 777 setting, because you are using either a AuthFile or AuthzSVNAccessFile, which designates proper permissions. (Please, anyone correct me if I am wrong on this.) > 2. My AuthzSVNAccessFile > AuthzSVNAccessFile /usr/local/etc/apache22/Authz_svnhome > [/] > * = r > [/usr2/svnhome] > * =r > [project_meth: /usr2/svnhome/project_meth] > david = rw > test = r I am going to assume `/usr/svnhome` is the directory where you have the root SVN directory. If I am right, your Authz file is wrong. Here's how it works: Say my SVN root is in /usr/home/svn. When I create the Authz file, and I use [/], the Authz file sees /usr/home/svn as /. Meaning, it doesn't see anything above it. (Think jail). That said, the second directory entry in you Authz file "[/usr2/svnhome]", unless it is a project inside your SVN, has to change. Better explained?: if you have this: http://your.host.com/svn/usr2/svnhome , your file is NOT wrong... If /usr2/svnhome is where your SVN root is, it IS wrong. If I have completely misunderstood your file, and what you were aiming to accomplish, I appologize -- but I remember this is how I misunderstood it when I started using SVN. I hope this helps. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
I tried the earlier suggested dump/restore: %cd /user %dump -L -f - /usr | restore -r -f - When I log-in over ssh I get: Could not chdir to home directory /home/michael: No such file or directory. Here's my fstab: # DeviceMountpoint FStype Options DumpPass# /dev/da0s1b noneswapsw 0 0 /dev/da1s1b noneswapsw 0 0 /dev/da0s1a / ufs rw 1 1 /dev/da0s1e /tmpufs rw 2 2 /dev/da0s1f /user ufs rw 2 2 /dev/da0s1d /varufs rw 2 2 /dev/da1s1d /home ufs rw 2 2 /dev/da2s1d /usrufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 This reflects the new /usr. Here's my dmesg.boot Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p7 #2: Mon Aug 20 07:20:53 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MARIMIKE ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Sempron(tm) Processor 3400+ (2009.68-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2 Features=0x78bfbff Features2=0x1 AMD Features=0xe2500800 AMD Features2=0x1 real memory = 469696512 (447 MB) avail memory = 450179072 (429 MB) ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe800-0xefff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) ahc0: port 0xe000-0xe0ff mem 0xf6022000-0xf6022fff irq 16 at device 8.0 on pci0 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xe200-0xe23f irq 17 at device 9.0 on pci0 miibus0: on xl0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:4b:31:54:cd atapci0: port 0xe300-0xe307,0xe400-0xe403,0xe500-0xe507,0xe600-0xe603,0xe700-0xe70f,0xe800-0xe8ff irq 20 at device 15.0 on pci0 ata2: on atapci0 ata3: on atapci0 atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe900-0xe90f at device 15.1 on pci0 ata0: on atapci1 ata1: on atapci1 uhci0: port 0xea00-0xea1f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xeb00-0xeb1f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xec00-0xec1f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xed00-0xed1f irq 21 at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xf602-0xf60200ff irq 21 at device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pci0: at device 17.5 (no driver attached) vr0: port 0xef00-0xefff mem 0xf6021000-0xf60210ff irq 23 at device 18.0 on pci0 miibus1: on vr0 ukphy0: on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:19:db:77:1a:78 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 plip0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on
uncorrectable disk error
ad4: FAILURE - READ_DMA48 status=51 error=40 LBA=465628608 g_vfs_done():ad4a[READ(offset=238401650688, length=638976)]error = 5 how can i find (UFS2) what file uses that block? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On Mon, Aug 20, 2007 at 06:52:12PM -0400, Michael S wrote: > I tried the earlier suggested dump/restore: > %cd /user > %dump -L -f - /usr | restore -r -f - > > When I log-in over ssh I get: > Could not chdir to home directory /home/michael: No > such file or directory. Well, is there a directory named/home/michael It looks like there is a file system mounted as /home. I am guessing that has not changed. But, it is telling you that it cannot find that directory. Are there some links messing you up? What does 'df -k' show? jerry > > Here's my fstab: > # DeviceMountpoint FStype > Options DumpPass# > /dev/da0s1b noneswapsw > 0 0 > /dev/da1s1b noneswapsw > 0 0 > /dev/da0s1a / ufs rw > 1 1 > /dev/da0s1e /tmpufs rw > 2 2 > /dev/da0s1f /user ufs rw > 2 2 > /dev/da0s1d /varufs rw > 2 2 > /dev/da1s1d /home ufs rw > 2 2 > /dev/da2s1d /usrufs rw > 2 2 > /dev/acd0 /cdrom cd9660 > ro,noauto 0 0 > > This reflects the new /usr. > > Here's my dmesg.boot > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 >The Regents of the University of California. > All rights reserved. > FreeBSD is a registered trademark of The FreeBSD > Foundation. > FreeBSD 6.2-RELEASE-p7 #2: Mon Aug 20 07:20:53 EDT > 2007 >[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MARIMIKE > ACPI APIC Table: > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Sempron(tm) Processor 3400+ (2009.68-MHz > 686-class CPU) > Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2 > > Features=0x78bfbff > Features2=0x1 > AMD > Features=0xe2500800 > AMD Features2=0x1 > real memory = 469696512 (447 MB) > avail memory = 450179072 (429 MB) > ioapic0 irqs 0-23 on motherboard > acpi0: on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality > 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port > 0x4008-0x400b on acpi0 > cpu0: on acpi0 > acpi_button0: on acpi0 > pcib0: port 0xcf8-0xcff on > acpi0 > pci0: on pcib0 > agp0: mem > 0xe800-0xefff at device 0.0 on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pci1: at device 0.0 (no driver > attached) > ahc0: port > 0xe000-0xe0ff mem 0xf6022000-0xf6022fff irq 16 at > device 8.0 on pci0 > ahc0: [GIANT-LOCKED] > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 > SCBs > xl0: <3Com 3c905-TX Fast Etherlink XL> port > 0xe200-0xe23f irq 17 at device 9.0 on pci0 > miibus0: on xl0 > nsphy0: on miibus0 > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:4b:31:54:cd > atapci0: port > 0xe300-0xe307,0xe400-0xe403,0xe500-0xe507,0xe600-0xe603,0xe700-0xe70f,0xe800-0xe8ff > irq 20 at device 15.0 on pci0 > ata2: on atapci0 > ata3: on atapci0 > atapci1: port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe900-0xe90f at > device 15.1 on pci0 > ata0: on atapci1 > ata1: on atapci1 > uhci0: port 0xea00-0xea1f > irq 21 at device 16.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0xeb00-0xeb1f > irq 21 at device 16.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: port 0xec00-0xec1f > irq 21 at device 16.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: port 0xed00-0xed1f > irq 21 at device 16.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: on uhci3 > usb3: USB revision 1.0 > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: mem > 0xf602-0xf60200ff irq 21 at device 16.4 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 > usb2 usb3 > usb4: on ehci0 > usb4: USB revision 2.0 > uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, > addr 1 > uhub4: 8 ports with 8 removable, self powered > isab0: at device 17.0 on pci0 > isa0: on isab0 > pci0: at device 17.5 (no driver > attached) > vr0: port > 0xef00-0xefff mem 0xf6021000-0xf60210ff irq 23 at > device 18.0 on pci0 > miibus1: on vr0 > ukphy0: on > miibus1 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > vr0: Ethernet address: 00:19:db:77:1a:78 >
Re: Trying to move /usr
Here's df -k output: Filesystem 1K-blocks UsedAvail Capacity Mounted on /dev/da0s1a50763085046 38197418%/ devfs 110 100%/dev /dev/da0s1e495726 10 456058 0%/tmp /dev/da0s1f 3733038 2869704 56469284% /user /dev/da0s1d495726 110700 34536824%/var /dev/da1s1d 68431992 27948332 3500910244% /usr/home /dev/da2s1d 17213408 2882922 1295341418%/usr When I go back to the old /usr by editing fstab: /dev/da0s1b noneswapsw 0 0 /dev/da1s1b noneswapsw 0 0 /dev/da0s1a / ufs rw 1 1 /dev/da0s1e /tmpufs rw 2 2 /dev/da0s1f /usrufs rw 2 2 /dev/da0s1d /varufs rw 2 2 /dev/da1s1d /home ufs rw 2 2 /dev/da2s1d /user ufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 I get into my home directory with no problem. --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > On Mon, Aug 20, 2007 at 06:52:12PM -0400, Michael S > wrote: > > > I tried the earlier suggested dump/restore: > > %cd /user > > %dump -L -f - /usr | restore -r -f - > > > > When I log-in over ssh I get: > > Could not chdir to home directory /home/michael: > No > > such file or directory. > > Well, is there a directory named/home/michael > > It looks like there is a file system mounted as > /home. > I am guessing that has not changed. But, it is > telling you > that it cannot find that directory. Are there some > links > messing you up? > > What does 'df -k' show? > > jerry > > > > > Here's my fstab: > > # DeviceMountpoint FStype > > Options DumpPass# > > /dev/da0s1b noneswapsw > > > 0 0 > > /dev/da1s1b noneswapsw > > > 0 0 > > /dev/da0s1a / ufs rw > > > 1 1 > > /dev/da0s1e /tmpufs rw > > > 2 2 > > /dev/da0s1f /user ufs rw > > > 2 2 > > /dev/da0s1d /varufs rw > > > 2 2 > > /dev/da1s1d /home ufs rw > > > 2 2 > > /dev/da2s1d /usrufs rw > > > 2 2 > > /dev/acd0 /cdrom cd9660 > > ro,noauto 0 0 > > > > This reflects the new /usr. > > > > Here's my dmesg.boot > > > > Copyright (c) 1992-2007 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > > 1991, 1992, 1993, 1994 > >The Regents of the University of > California. > > All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD > > Foundation. > > FreeBSD 6.2-RELEASE-p7 #2: Mon Aug 20 07:20:53 EDT > > 2007 > >[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MARIMIKE > > ACPI APIC Table: > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: AMD Sempron(tm) Processor 3400+ (2009.68-MHz > > 686-class CPU) > > Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = > 2 > > > > > Features=0x78bfbff > > Features2=0x1 > > AMD > > > Features=0xe2500800 > > AMD Features2=0x1 > > real memory = 469696512 (447 MB) > > avail memory = 450179072 (429 MB) > > ioapic0 irqs 0-23 on motherboard > > acpi0: on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz > quality > > 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port > > 0x4008-0x400b on acpi0 > > cpu0: on acpi0 > > acpi_button0: on acpi0 > > pcib0: port 0xcf8-0xcff on > > acpi0 > > pci0: on pcib0 > > agp0: mem > > 0xe800-0xefff at device 0.0 on pci0 > > pcib1: at device 1.0 on pci0 > > pci1: on pcib1 > > pci1: at device 0.0 (no driver > > attached) > > ahc0: port > > 0xe000-0xe0ff mem 0xf6022000-0xf6022fff irq 16 at > > device 8.0 on pci0 > > ahc0: [GIANT-LOCKED] > > aic7892: Ultra160 Wide Channel A, SCSI Id=7, > 32/253 > > SCBs > > xl0: <3Com 3c905-TX Fast Etherlink XL> port > > 0xe200-0xe23f irq 17 at device 9.0 on pci0 > > miibus0: on xl0 > > nsphy0: on > miibus0 > > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, > > 100baseTX-FDX, auto > > xl0: Ethernet address: 00:10:4b:31:54:cd > > atapci0: port > > > 0xe300-0xe307,0xe400-0xe403,0xe500-0xe507,0xe600-0xe603,0xe700-0xe70f,0xe800-0xe8ff > > irq 20 at device 15.0 on pci0 > > ata2: on atapci0 > > ata3: on atapci0 > > atapci1: port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe900-0xe90f > at > > device 15.1 on pci0 > > ata0: on atapci1 > > ata1: on atapci1 > > uhci0: port > 0xea00-0xea1f > > irq 21 at device 16.0 on pci0 > > uhci0: [GI
Re: Hello!
On 8/20/07, Adam J Richardson <[EMAIL PROTECTED]> wrote: > > Date: Mon, 20 Aug 2007 11:24:01 +0200 > > From: Branko Vukelic <[EMAIL PROTECTED]> > > To: Adam J Richardson <[EMAIL PROTECTED]> > > > > If you allow me, a BSD noob, to take part... ;) > > > > I'd say FreeBSD is a wolf, and DesktopBSD is definitely a dog (as in > > domesticated wolf). By taming the wolf for desktop use (I'm not going > > into HOW that's possible) you get a system that is quite different > > (like an Alaskan Malaute), but still a dog, whereas DesktopBSD is > > still like a German Shepherd. I hope my approximation is about close? > > > > http://en.wikipedia.org/wiki/Alaskan_malamute > > http://en.wikipedia.org/wiki/German_shepherd > > > > As for other systems, yeah Windows is definitely a fish (if we're > > talking pets), and I don't find it prudent to mention Linux here. It's > > alien life form. :D > > You forgot to CC the list, Branko. :) Oh, sorry. I'm using the GMail's webmail atm, until I get something more decent. I keep forgetting the Reply All thingie. :p > [I wouldn't worry about noobishness. We're mostly noobs on this list > anyway. There are a few gurus lurking in the shadows. As long as you > show willingness to learn and don't expect others to do hold your hand > while you cross the road, no one minds.] > > Regarding the pets analogy, I was sort of thinking we could stay on > Earth for now and leave aliens for weird future operating systems like > LCARS. Perhaps Linux could be a venus fly trap, or possibly a ferret? A > ferret would be good, since it's more like BSD than it is like Windows. > And it's also very curious. A ferret? :D Nice one! A Windows is a dodo, then. :) http://en.wikipedia.org/wiki/Dodo > Adam J Richardson > -- Branko ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Shared-mime-info won't compile
I've been having a problem for a long time trying to compile the shared-mime-info port. Below is the error I'm getting. I have tried recompiling libxml2 and everything shared-mime-info depends on. gmake[1]: Entering directory `/usr/ports/misc/shared-mime-info/work/shared-mime-info-0.22' cc -DHAVE_CONFIG_H -I. -I/usr/local/include/libxml2 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/libxml2 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -g -O2 -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -MT update_mime_database-update-mime-database.o -MD -MP -MF .deps/update_mime_database-update-mime-database.Tpo -c -o update_mime_database-update-mime-database.o `test -f 'update-mime-database.c' || echo './'`update-mime-database.c mv -f .deps/update_mime_database-update-mime-database.Tpo .deps/update_mime_database-update-mime-database.Po cc -I/usr/local/include/libxml2 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -g -O2 -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -L/usr/local/lib -o update-mime-database update_mime_database-update-mime-database.o -L/usr/local/lib -lxml2 -lglib-2.0 -liconv /usr/local/lib/libxml2.so: undefined reference to `pthread_equal' gmake[1]: *** [update-mime-database] Error 1 gmake[1]: Leaving directory `/usr/ports/misc/shared-mime-info/work/shared-mime-info-0.22' gmake: *** [check-recursive] Error 1 *** Error code 2 Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
At 06:28 PM 8/20/2007, Michael S wrote: Here's df -k output: Filesystem 1K-blocks UsedAvail Capacity Mounted on /dev/da0s1a50763085046 38197418%/ devfs 110 100%/dev /dev/da0s1e495726 10 456058 0%/tmp /dev/da0s1f 3733038 2869704 56469284% /user /dev/da0s1d495726 110700 34536824%/var /dev/da1s1d 68431992 27948332 3500910244% /usr/home /dev/da2s1d 17213408 2882922 1295341418%/usr When I go back to the old /usr by editing fstab: /dev/da0s1b noneswapsw 0 0 /dev/da1s1b noneswapsw 0 0 /dev/da0s1a / ufs rw 1 1 /dev/da0s1e /tmpufs rw 2 2 /dev/da0s1f /usrufs rw 2 2 /dev/da0s1d /varufs rw 2 2 /dev/da1s1d /home ufs rw 2 2 /dev/da2s1d /user ufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 I get into my home directory with no problem. You need to adjust not just the /usr and /user but also /usr/home entries in fstab. Before you make any changes, do just a mount command and see where things are mounted. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd 7 release date :)
Jerry McAllister wrote: On Mon, Aug 20, 2007 at 05:15:10PM +1000, Sam Lawrance wrote: On 20/08/2007, at 10:47 AM, Jerry McAllister wrote: On Sun, Aug 19, 2007 at 03:05:00PM +0200, Wojciech Puchar wrote: just for reference only: Original release planned date of 7.0 was end of Jul. But now is nearly end of Aug. So Which date you guess 7.0 will be released? :D when it will be ready. if time is more important than quality for you get simply get -current. even if not - and you would like help testing it, fetch and report problems. There was obviously no intent to challenge or apply preasure in the question so you don't need to be snippy. If you don't have any useful information or at least information you think might be useful (qualifier for my posts) then don't bother replying - at least not snippy, posts. We can afford to be civil - expecially when a civil question is asked. The person was just noting that the old guesses were no longer operable and hoping that some new best guesses might have been made. We all know these dates are very movable and for very good reasons. No one is pushing for low quality, hurried up junk. But those best guesses by people in the know about how the processes if moving along are helpful for those of use out here in the hinterland trying to make it through each day. There was nothing snippy in that post, it was just succinct. By now, people in the know have learned that it really will be done "when it's done". Read it from the point of view of a person who is not an insider and is seeking a little help in keeping their FreeBSD life together. When someone asks for a "guess" and the response sounds more like 'get out of my face' than anything with useful content, it is snippy. I could have used a stronger term. As I said, we know and even newbies can learn, with considerate explanitory responses, that no absolute date can realistically be named - that there is justifiably more concern about quality than making a particular 'release date'. But some running info on how it is going is helpful - actually reassuring, to those of us out of the loop. It needn't be anything elaborate. Anyway, the important issue here is refusing to consider the effects of the response when replying to a posted question, even when it is a somewhat unenlightened question. jerry Dear all In my question, I not meaned Freebsd release is slow or something like that :D Just want to know it release date for reference and tell it's release date to my friends who are using it also :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
Right now things are set up the old way and here's what the mount command says: /dev/da0s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/da0s1e on /tmp (ufs, local, soft-updates) /dev/da0s1f on /usr (ufs, local, soft-updates) /dev/da0s1d on /var (ufs, local, soft-updates) /dev/da1s1d on /usr/home (ufs, local, soft-updates) /dev/da2s1d on /user (ufs, local, soft-updates) Should I change my entry for /home, and make it /usr/home ? --- Derek Ragona <[EMAIL PROTECTED]> wrote: > At 06:28 PM 8/20/2007, Michael S wrote: > >Here's df -k output: > > > >Filesystem 1K-blocks UsedAvail Capacity > >Mounted on > >/dev/da0s1a50763085046 38197418%/ > >devfs 110 100% > /dev > >/dev/da0s1e495726 10 456058 0% > /tmp > >/dev/da0s1f 3733038 2869704 56469284% > >/user > >/dev/da0s1d495726 110700 34536824% > /var > >/dev/da1s1d 68431992 27948332 3500910244% > >/usr/home > >/dev/da2s1d 17213408 2882922 1295341418% > /usr > > > >When I go back to the old /usr by editing fstab: > >/dev/da0s1b noneswapsw > > 0 0 > >/dev/da1s1b noneswapsw > > 0 0 > >/dev/da0s1a / ufs rw > > 1 1 > >/dev/da0s1e /tmpufs rw > > 2 2 > >/dev/da0s1f /usrufs rw > > 2 2 > >/dev/da0s1d /varufs rw > > 2 2 > >/dev/da1s1d /home ufs rw > > 2 2 > >/dev/da2s1d /user ufs rw > > 2 2 > >/dev/acd0 /cdrom cd9660 > >ro,noauto 0 > > > >I get into my home directory with no problem. > > You need to adjust not just the /usr and /user but > also /usr/home entries > in fstab. Before you make any changes, do just a > mount command and see > where things are mounted. > > -Derek > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > MailScanner thanks transtec Computers for their > support. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On Mon, Aug 20, 2007 at 07:28:51PM -0400, Michael S wrote: > Here's df -k output: > > Filesystem 1K-blocks UsedAvail Capacity > Mounted on > /dev/da0s1a50763085046 38197418%/ > devfs 110 100%/dev > /dev/da0s1e495726 10 456058 0%/tmp > /dev/da0s1f 3733038 2869704 56469284% > /user > /dev/da0s1d495726 110700 34536824%/var > /dev/da1s1d 68431992 27948332 3500910244% > /usr/home > /dev/da2s1d 17213408 2882922 1295341418%/usr > > When I go back to the old /usr by editing fstab: > /dev/da0s1b noneswapsw > 0 0 > /dev/da1s1b noneswapsw > 0 0 > /dev/da0s1a / ufs rw > 1 1 > /dev/da0s1e /tmpufs rw > 2 2 > /dev/da0s1f /usrufs rw > 2 2 > /dev/da0s1d /varufs rw > 2 2 > /dev/da1s1d /home ufs rw > 2 2 > /dev/da2s1d /user ufs rw > 2 2 > /dev/acd0 /cdrom cd9660 > ro,noauto 0 > > I get into my home directory with no problem. Well, it looks like you are getting that partition /dev/da1s1d mounted as /usr/home, not as /home.(I am presuming that /usr/home belongs with the line above). I don't know exactly why, based on the fstab you show here. One thought is that there is some link from /home to something like /usr/home that works in the old one, but that you are mangling with the mount in the new fstab. jerry > > > --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > > > On Mon, Aug 20, 2007 at 06:52:12PM -0400, Michael S > > wrote: > > > > > I tried the earlier suggested dump/restore: > > > %cd /user > > > %dump -L -f - /usr | restore -r -f - > > > > > > When I log-in over ssh I get: > > > Could not chdir to home directory /home/michael: > > No > > > such file or directory. > > > > Well, is there a directory named/home/michael > > > > It looks like there is a file system mounted as > > /home. > > I am guessing that has not changed. But, it is > > telling you > > that it cannot find that directory. Are there some > > links > > messing you up? > > > > What does 'df -k' show? > > > > jerry > > > > > > > > Here's my fstab: > > > # DeviceMountpoint FStype > > > Options DumpPass# > > > /dev/da0s1b noneswapsw > > > > > 0 0 > > > /dev/da1s1b noneswapsw > > > > > 0 0 > > > /dev/da0s1a / ufs rw > > > > > 1 1 > > > /dev/da0s1e /tmpufs rw > > > > > 2 2 > > > /dev/da0s1f /user ufs rw > > > > > 2 2 > > > /dev/da0s1d /varufs rw > > > > > 2 2 > > > /dev/da1s1d /home ufs rw > > > > > 2 2 > > > /dev/da2s1d /usrufs rw > > > > > 2 2 > > > /dev/acd0 /cdrom cd9660 > > > ro,noauto 0 0 > > > > > > This reflects the new /usr. > > > > > > Here's my dmesg.boot > > > > > > Copyright (c) 1992-2007 The FreeBSD Project. > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > > > 1991, 1992, 1993, 1994 > > >The Regents of the University of > > California. > > > All rights reserved. > > > FreeBSD is a registered trademark of The FreeBSD > > > Foundation. > > > FreeBSD 6.2-RELEASE-p7 #2: Mon Aug 20 07:20:53 EDT > > > 2007 > > >[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MARIMIKE > > > ACPI APIC Table: > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > CPU: AMD Sempron(tm) Processor 3400+ (2009.68-MHz > > > 686-class CPU) > > > Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = > > 2 > > > > > > > > > Features=0x78bfbff > > > Features2=0x1 > > > AMD > > > > > > Features=0xe2500800 > > > AMD Features2=0x1 > > > real memory = 469696512 (447 MB) > > > avail memory = 450179072 (429 MB) > > > ioapic0 irqs 0-23 on motherboard > > > acpi0: on motherboard > > > acpi0: Power Button (fixed) > > > Timecounter "ACPI-fast" frequency 3579545 Hz > > quality > > > 1000 > > > acpi_timer0: <24-bit timer at 3.579545MHz> port > > > 0x4008-0x400b on acpi0 > > > cpu0: on acpi0 > > > acpi_button0: on acpi0 > > > pcib0: port 0xcf8-0xcff on > > > acpi0 > > > pci0: on pcib0 > > > agp0: mem > > > 0xe800-0xefff at device 0.0 on pci0 > > > pcib1: at device 1.0 on pci0 > > > pci1: on pcib1 > > > pci1: at device 0.0 (no driver > > > attached) > > > ahc0: port > > > 0xe000-0xe0ff mem 0xf6022000-0xf6022fff irq 16 at > > > device 8.0 o
Re: Trying to move /usr
On Mon, Aug 20, 2007 at 07:47:29PM -0400, Michael S wrote: > Right now things are set up the old way and here's > what the mount command says: > > /dev/da0s1a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/da0s1e on /tmp (ufs, local, soft-updates) > /dev/da0s1f on /usr (ufs, local, soft-updates) > /dev/da0s1d on /var (ufs, local, soft-updates) > /dev/da1s1d on /usr/home (ufs, local, soft-updates) > /dev/da2s1d on /user (ufs, local, soft-updates) > > > Should I change my entry for /home, and make it > /usr/home ? Well, since login was looking for your (michael) home directory in /home/michael, than that is probably the way you had it and want it to be. But, maybe I am remembering what you posted before wrong. Anyway, that is certainly mounting that partition as /usr/home. Are you sure you didn't edit that or get your fstab-s swapped around? jerry > > > --- Derek Ragona <[EMAIL PROTECTED]> > wrote: > > > At 06:28 PM 8/20/2007, Michael S wrote: > > >Here's df -k output: > > > > > >Filesystem 1K-blocks UsedAvail Capacity > > >Mounted on > > >/dev/da0s1a50763085046 38197418%/ > > >devfs 110 100% > > /dev > > >/dev/da0s1e495726 10 456058 0% > > /tmp > > >/dev/da0s1f 3733038 2869704 56469284% > > >/user > > >/dev/da0s1d495726 110700 34536824% > > /var > > >/dev/da1s1d 68431992 27948332 3500910244% > > >/usr/home > > >/dev/da2s1d 17213408 2882922 1295341418% > > /usr > > > > > >When I go back to the old /usr by editing fstab: > > >/dev/da0s1b noneswapsw > > > 0 0 > > >/dev/da1s1b noneswapsw > > > 0 0 > > >/dev/da0s1a / ufs rw > > > 1 1 > > >/dev/da0s1e /tmpufs rw > > > 2 2 > > >/dev/da0s1f /usrufs rw > > > 2 2 > > >/dev/da0s1d /varufs rw > > > 2 2 > > >/dev/da1s1d /home ufs rw > > > 2 2 > > >/dev/da2s1d /user ufs rw > > > 2 2 > > >/dev/acd0 /cdrom cd9660 > > >ro,noauto 0 > > > > > >I get into my home directory with no problem. > > > > You need to adjust not just the /usr and /user but > > also /usr/home entries > > in fstab. Before you make any changes, do just a > > mount command and see > > where things are mounted. > > > > -Derek > > > > -- > > This message has been scanned for viruses and > > dangerous content by MailScanner, and is > > believed to be clean. > > MailScanner thanks transtec Computers for their > > support. > > > > ___ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > > "[EMAIL PROTECTED]" > > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
At 06:47 PM 8/20/2007, Michael S wrote: Right now things are set up the old way and here's what the mount command says: /dev/da0s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/da0s1e on /tmp (ufs, local, soft-updates) /dev/da0s1f on /usr (ufs, local, soft-updates) /dev/da0s1d on /var (ufs, local, soft-updates) /dev/da1s1d on /usr/home (ufs, local, soft-updates) /dev/da2s1d on /user (ufs, local, soft-updates) Should I change my entry for /home, and make it /usr/home ? From your last note, it looked like home is /usr/home. That is why I suggested you do: # mount and check how home is really mounted. If it is /usr/home that would explain the trouble you had using your new /usr. -Derek --- Derek Ragona <[EMAIL PROTECTED]> wrote: > At 06:28 PM 8/20/2007, Michael S wrote: > >Here's df -k output: > > > >Filesystem 1K-blocks UsedAvail Capacity > >Mounted on > >/dev/da0s1a50763085046 38197418%/ > >devfs 110 100% > /dev > >/dev/da0s1e495726 10 456058 0% > /tmp > >/dev/da0s1f 3733038 2869704 56469284% > >/user > >/dev/da0s1d495726 110700 34536824% > /var > >/dev/da1s1d 68431992 27948332 3500910244% > >/usr/home > >/dev/da2s1d 17213408 2882922 1295341418% > /usr > > > >When I go back to the old /usr by editing fstab: > >/dev/da0s1b noneswapsw > > 0 0 > >/dev/da1s1b noneswapsw > > 0 0 > >/dev/da0s1a / ufs rw > > 1 1 > >/dev/da0s1e /tmpufs rw > > 2 2 > >/dev/da0s1f /usrufs rw > > 2 2 > >/dev/da0s1d /varufs rw > > 2 2 > >/dev/da1s1d /home ufs rw > > 2 2 > >/dev/da2s1d /user ufs rw > > 2 2 > >/dev/acd0 /cdrom cd9660 > >ro,noauto 0 > > > >I get into my home directory with no problem. > > You need to adjust not just the /usr and /user but > also /usr/home entries > in fstab. Before you make any changes, do just a > mount command and see > where things are mounted. > > -Derek > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > MailScanner thanks transtec Computers for their > support. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
I tried changing the /home entry in the fstab to /usr/home, but the result is the same. And when I go to /home or /usr/home, issuing ls, simply gives me the prompt. Michael <--- Derek Ragona <[EMAIL PROTECTED]> wrote: > At 06:47 PM 8/20/2007, Michael S wrote: > >Right now things are set up the old way and here's > >what the mount command says: > > > >/dev/da0s1a on / (ufs, local) > >devfs on /dev (devfs, local) > >/dev/da0s1e on /tmp (ufs, local, soft-updates) > >/dev/da0s1f on /usr (ufs, local, soft-updates) > >/dev/da0s1d on /var (ufs, local, soft-updates) > >/dev/da1s1d on /usr/home (ufs, local, soft-updates) > >/dev/da2s1d on /user (ufs, local, soft-updates) > > > > > >Should I change my entry for /home, and make it > >/usr/home ? > > From your last note, it looked like home is > /usr/home. That is why I > suggested you do: > # mount > and check how home is really mounted. If it is > /usr/home that would > explain the trouble you had using your new /usr. > > -Derek > > > > >--- Derek Ragona <[EMAIL PROTECTED]> > >wrote: > > > > > At 06:28 PM 8/20/2007, Michael S wrote: > > > >Here's df -k output: > > > > > > > >Filesystem 1K-blocks UsedAvail > Capacity > > > >Mounted on > > > >/dev/da0s1a50763085046 38197418% > / > > > >devfs 110 100% > > > /dev > > > >/dev/da0s1e495726 10 456058 0% > > > /tmp > > > >/dev/da0s1f 3733038 2869704 56469284% > > > >/user > > > >/dev/da0s1d495726 110700 34536824% > > > /var > > > >/dev/da1s1d 68431992 27948332 3500910244% > > > >/usr/home > > > >/dev/da2s1d 17213408 2882922 1295341418% > > > /usr > > > > > > > >When I go back to the old /usr by editing > fstab: > > > >/dev/da0s1b noneswap > sw > > > > 0 0 > > > >/dev/da1s1b noneswap > sw > > > > 0 0 > > > >/dev/da0s1a / ufs > rw > > > > 1 1 > > > >/dev/da0s1e /tmpufs > rw > > > > 2 2 > > > >/dev/da0s1f /usrufs > rw > > > > 2 2 > > > >/dev/da0s1d /varufs > rw > > > > 2 2 > > > >/dev/da1s1d /home ufs > rw > > > > 2 2 > > > >/dev/da2s1d /user ufs > rw > > > > 2 2 > > > >/dev/acd0 /cdrom cd9660 > > > >ro,noauto 0 > > > > > > > >I get into my home directory with no problem. > > > > > > You need to adjust not just the /usr and /user > but > > > also /usr/home entries > > > in fstab. Before you make any changes, do just > a > > > mount command and see > > > where things are mounted. > > > > > > -Derek > > > > > > -- > > > This message has been scanned for viruses and > > > dangerous content by MailScanner, and is > > > believed to be clean. > > > MailScanner thanks transtec Computers for their > > > support. > > > > > > ___ > > > freebsd-questions@freebsd.org mailing list > > > > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to > > > "[EMAIL PROTECTED]" > > > > > > >___ > >freebsd-questions@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > > > >-- > >This message has been scanned for viruses and > >dangerous content by MailScanner, and is > >believed to be clean. > >MailScanner thanks transtec Computers for their > support. > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > MailScanner thanks transtec Computers for their > support. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
Jerry, I am sure, because I did it multiple times. As soon as I mount the old /usr (the one on the smaller drive) I log on into my home directory no problem. Michael --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > On Mon, Aug 20, 2007 at 07:47:29PM -0400, Michael S > wrote: > > > Right now things are set up the old way and here's > > what the mount command says: > > > > /dev/da0s1a on / (ufs, local) > > devfs on /dev (devfs, local) > > /dev/da0s1e on /tmp (ufs, local, soft-updates) > > /dev/da0s1f on /usr (ufs, local, soft-updates) > > /dev/da0s1d on /var (ufs, local, soft-updates) > > /dev/da1s1d on /usr/home (ufs, local, > soft-updates) > > /dev/da2s1d on /user (ufs, local, soft-updates) > > > > > > Should I change my entry for /home, and make it > > /usr/home ? > > Well, since login was looking for your (michael) > home directory > in /home/michael, than that is probably the way you > had it and > want it to be. But, maybe I am remembering what > you posted before > wrong. > > Anyway, that is certainly mounting that partition as > /usr/home. > Are you sure you didn't edit that or get your > fstab-s swapped > around? > > jerry > > > > > > > --- Derek Ragona <[EMAIL PROTECTED]> > > wrote: > > > > > At 06:28 PM 8/20/2007, Michael S wrote: > > > >Here's df -k output: > > > > > > > >Filesystem 1K-blocks UsedAvail > Capacity > > > >Mounted on > > > >/dev/da0s1a50763085046 38197418% > / > > > >devfs 110 100% > > > > /dev > > > >/dev/da0s1e495726 10 456058 0% > > > > /tmp > > > >/dev/da0s1f 3733038 2869704 56469284% > > > >/user > > > >/dev/da0s1d495726 110700 34536824% > > > > /var > > > >/dev/da1s1d 68431992 27948332 3500910244% > > > >/usr/home > > > >/dev/da2s1d 17213408 2882922 1295341418% > > > > /usr > > > > > > > >When I go back to the old /usr by editing > fstab: > > > >/dev/da0s1b noneswap > sw > > > > 0 0 > > > >/dev/da1s1b noneswap > sw > > > > 0 0 > > > >/dev/da0s1a / ufs > rw > > > > 1 1 > > > >/dev/da0s1e /tmpufs > rw > > > > 2 2 > > > >/dev/da0s1f /usrufs > rw > > > > 2 2 > > > >/dev/da0s1d /varufs > rw > > > > 2 2 > > > >/dev/da1s1d /home ufs > rw > > > > 2 2 > > > >/dev/da2s1d /user ufs > rw > > > > 2 2 > > > >/dev/acd0 /cdrom cd9660 > > > >ro,noauto 0 > > > > > > > >I get into my home directory with no problem. > > > > > > You need to adjust not just the /usr and /user > but > > > also /usr/home entries > > > in fstab. Before you make any changes, do just > a > > > mount command and see > > > where things are mounted. > > > > > > -Derek > > > > > > -- > > > This message has been scanned for viruses and > > > dangerous content by MailScanner, and is > > > believed to be clean. > > > MailScanner thanks transtec Computers for their > > > support. > > > > > > ___ > > > freebsd-questions@freebsd.org mailing list > > > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to > > > "[EMAIL PROTECTED]" > > > > > > > ___ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Shared-mime-info won't compile
On Mon, 20 Aug 2007 16:07:07 -0700 (PDT) David LeCount <[EMAIL PROTECTED]> wrote: > I've been having a problem for a long time trying to > compile the shared-mime-info port. Below is the error > I'm getting. I have tried recompiling libxml2 and > everything shared-mime-info depends on. > > gmake[1]: Entering directory > `/usr/ports/misc/shared-mime-info/work/shared-mime-info-0.22' > cc -DHAVE_CONFIG_H -I. -I/usr/local/include/libxml2 > -I/usr/local/include -I/usr/local/include/glib-2.0 > -I/usr/local/lib/glib-2.0/include > -I/usr/local/include -I/usr/local/include/libxml2 > -I/usr/local/include -I/usr/local/include/glib-2.0 > -I/usr/local/lib/glib-2.0/include -g -O2 -pipe > -Wall -Wstrict-prototypes -Wmissing-prototypes > -Wwrite-strings -MT > update_mime_database-update-mime-database.o -MD -MP > -MF > .deps/update_mime_database-update-mime-database.Tpo -c > -o update_mime_database-update-mime-database.o `test > -f 'update-mime-database.c' || echo > './'`update-mime-database.c > mv -f > .deps/update_mime_database-update-mime-database.Tpo > .deps/update_mime_database-update-mime-database.Po > cc -I/usr/local/include/libxml2 -I/usr/local/include > -I/usr/local/include/glib-2.0 > -I/usr/local/lib/glib-2.0/include -g -O2 -pipe > -Wall -Wstrict-prototypes -Wmissing-prototypes > -Wwrite-strings -L/usr/local/lib -o > update-mime-database > update_mime_database-update-mime-database.o > -L/usr/local/lib -lxml2 -lglib-2.0 -liconv > /usr/local/lib/libxml2.so: undefined reference to > `pthread_equal' Hello David, Just to be sure: your ports tree is up-to-date, you didn't install textproc/libxml2 altering WITH_THREADS option and you don't have anything threads-related in /etc/make.conf or somewhere else? In that case this joyfully written PR can certainly help: http://www.freebsd.org/cgi/query-pr.cgi?pr=threads/113666 (add -lc_r in share-mime-info's Makefile as explained). Besides that, keep an eye on that PR since answers will surely be relevant for you. Of course, you can artificially add -pthread among C compiler flags, like this: # portupgrade -M 'CFLAGS=-pthread' shared-mime-info (if you use portupgrade) or like this: # cd /usr/ports/misc/shared-mime-info # make CFLAGS=-pthread but I'm not certain about the consequences. Better try the solution from the aforementioned PR. Nikola Lečić ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SAS (serial attached SCSI)
Jonathan, > other than telling him "well this is the new SCSI", i am wondering > if anyone else is successfully using this technology thus far. Well you'll have to accept the fact that it is the new SCSI and you have to run with it. I bet you will have hard time finding a server with parallel SCSI. To answer your question, yes, I have one HP machine using SAS disks, FreeBSD 6.2, no problem so far. I'd say that one concern with SAS (like with SATA) could be the connectors (I read stories about loose connectors); in my case, this is hot swap disks, so there should not be problem. Don't go for cheap cables to avoid bad quality/substandard connectors. Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
syslogd, exec and alarms
I have a syslog.conf line that has a selector pointing to action that is a perl script. The script takes action based on the content of the line passed to it. Simple stuff. Works fine. Wanting to be resource sensitive, I would like the script to terminate after so many idle seconds - its likely to get occasional bursts of input with quiet periods here and there. No problem, set an alarm with a maximum idle time and shutdown if it fires. This works fine if I execute the script from the command line. Doesn't work at all if spawned by syslogd. I assume syslogd or the sh being fired to spawn the command are grabbing the alarm signal for themselves. I am missing something obvious. Is there any way to make this work? As it is I can keep the program going all the time or I can have syslogd respawn it every time a line is sent. Neither option is appealing. This problem seems to be relatively resistant to google searches for me thus far. -Darren ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Shared-mime-info won't compile
On Mon, 20 Aug 2007 18:04:01 -0700 (PDT) David LeCount <[EMAIL PROTECTED]> wrote: > --- Nikola Lecic <[EMAIL PROTECTED]> wrote: [...] > > In that case this joyfully written PR can certainly > > help: > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=threads/113666 > > > > (add -lc_r in share-mime-info's Makefile as > > explained). Besides that, > > keep an eye on that PR since answers will surely be > > relevant for you. [...] > That fixed my problem. I searched the mailing lists > and Google but I guess I forgot to search for a bug > report. Many thanks. I'm posting your feedback back to the list so that others can know that this helps. Nikola Lečić ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Configuring OpenLDAP on FreeBSD 6.2 Release, Problems.
> I am a newcomer to the FreeBSD world. I am trying to implement a > openLDAP installation. It all went ok with the SASL and SERVER > install in conjunction with BDB, yet when I try starting the service > using "/usr/local/libexec/slapd" or "/usr/local/etc/rc.d/slapd > start", the service does not start. I checked "ps -axww | grep > slapd" and nothing is showing. After checking "cat > /var/log/debug.log" I can see the following output in stdout. > Beside enabling slapd in /etc/rc.conf, did you configure openldad in /usr/local/etc/openldad? I doubt it will start before you configure it properly. Best regards, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Block to i-node to file name (was Re: uncorrectable disk error)
On Tue, Aug 21, 2007 at 01:04:38AM +0200, Wojciech Puchar wrote: > ad4: FAILURE - READ_DMA48 status=51 > error=40 LBA=465628608 > g_vfs_done():ad4a[READ(offset=238401650688, length=638976)]error = 5 > > how can i find (UFS2) what file uses that block? [I took the liberty to change the subject for better archival] Unless you're an fs guru or very patient and careful, you probably won't or would have a hard time. But don't give up yet! Try the following procedure: 1. Determine the slice where the block is located (fdisk) 2. Determine the partition of the block (bsdlabel) 3. Calculate the partition-relative offset of the block (i.e. subtract the slice offset and subtract from the result the partition offset). 4. Fire up fsdb(8) with the -r option on that file system. 5. Use fsdb's "findblk" command with that fs-relative offset to determine the inode that is holding this block. From "man fsdb": findblk disk block number ... Find the inode(s) owning the specified disk block(s) number(s). Note that these are not absolute disk blocks numbers, but offsets from the start of the partition. Keep in mind that the block could also be in the free list (unused); but you'd not get this error message if it was (?). 6. Verify that the resulting i-node number is the right one by jumping to that inode with the "inode" command of fsdb, and rechecking that this block is indeed held by this i-node with the "blocks" command of fsdb. (you may want to run fsdb in a script(1), to capture the potentially long list of blocks). 7. The inode number you get won't tell you the name of the file. To find this, scan all directories of that file system for this inode number (I'd write a small C proggy for that, but you could just as well use find(1)'s -inum switch. If your disk is dying, this can (wether with a C program or with find(1) crash your system. If the number of directories is not very high, you could try to use fsdb(8) for that. BEWARE: Always use fsdb(8) with the read-only flag -r! You could irrevocably damage your file system otherwise if you don't know exactly what you're doing. Good luck! Regards, -cpghost. P.S.: We really need a little LBA to i-node utility for UFS/UFS2, that we could combine with find /fs -inum ...! If possible, a utility that also takes care of GEOM-ified disks etc... -- Cordula's Web. http://www.cordula.ws/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: syslogd, exec and alarms
On Aug 20, 2007, at 8:11 PMAug 20, 2007, Darren Henderson wrote: I have a syslog.conf line that has a selector pointing to action that is a perl script. The script takes action based on the content of the line passed to it. Simple stuff. Works fine. Wanting to be resource sensitive, I would like the script to terminate after so many idle seconds - its likely to get occasional bursts of input with quiet periods here and there. No problem, set an alarm with a maximum idle time and shutdown if it fires. This works fine if I execute the script from the command line. Doesn't work at all if spawned by syslogd. I assume syslogd or the sh being fired to spawn the command are grabbing the alarm signal for themselves. I am missing something obvious. Is there any way to make this work? As it is I can keep the program going all the time or I can have syslogd respawn it every time a line is sent. Neither option is appealing. This problem seems to be relatively resistant to google searches for me thus far. Darren, From my limited understanding, the process that is spawned by that alarm is killed by syslogd once whatever it's supposed to do is killed. I'm not sure what options you've really got. HTH - Eric F Crist Secure Computing Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
Michael S wrote: I reverted to the old /usr. What I had done: Initially I set up the newly installed drive (da2) to have only one partition (da2s1d) which I chose to be /user (note the e). I tarred /usr to a file in /user tar -cf /user/usr.tar /tar and extracted the file tar -xf usr.tar I had the whole structure of /usr underneath /user/usr And then cd usr mv * .. to have everything under /user After thinking about that mv command, I have come to the conclusion that /dev/da2s1d does not in fact contain a /usr directory structure and if mounted will be empty. Why? Note /dev/ad8s1e is an empty partition (a new disk, if you will on my system that I will in this demonstration). Also, I'll use user and usrdemo as the names of the user and usr directories that Michael is using, respectively. I don't want to overwrite my own usr directory needlessly. Observe: Create a mount point and mount the disk t# cd / t# mkdir user t# mount -t ufs /dev/ad8s1e /user t# pwd /user t# mkdir -p usrdemo/path Check our partition (there is a dot (.)after the df command, look closely): t# df . Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad8s1e5076306 467014 0%/user Create a file for no reason. t# touch usrdemo/path/file.txt t# cd / t# ls -laR /user total 6 drwxrwxrwt 3 root wheel 512 Aug 20 22:05 . drwxr-xr-x 26 root wheel 1024 Aug 20 21:59 .. drwxr-xr-x 3 root wheel 512 Aug 20 22:05 usrdemo /user/usrdemo: total 6 drwxr-xr-x 3 root wheel 512 Aug 20 22:05 . drwxrwxrwt 3 root wheel 512 Aug 20 22:05 .. drwxr-xr-x 2 root wheel 512 Aug 20 22:05 path /user/usrdemo/path: total 4 drwxr-xr-x 2 root wheel 512 Aug 20 22:05 . drwxr-xr-x 3 root wheel 512 Aug 20 22:05 .. -rw-r--r-- 1 root wheel0 Aug 20 22:05 file.txt t# cd /user Let's look at what file system we're on again: t# df . Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad8s1e5076306 467014 0%/user Still on the new drive. Now that we're in the /user directory let us try, as Michael says "to have everything under /user". Right idea, but mv is not the tool in this case: The next command causes much trouble: t# mv * .. will in fact move the contents of /user to the parent directory which is in fact /, the root of the file system. There is nothing left in /user: t# pwd /user t# ls -la total 4 drwxrwxrwt 2 root wheel 512 Aug 20 22:06 . drwxr-xr-x 27 root wheel 512 Aug 20 22:06 .. If we change directory to the .. directory target (the same target as the mv command) we'll see the usrdemo directory. t# cd .. t# ls .cshrc compat lib procusb .profiledev libexec rescue usr .snap distmedia rootusrdemo COPYRIGHT dvdrom mnd sbinvar bin entropy mnt sdvd bootetc usersys cdrom homeportabletmp If we change to it and check our file system: t# cd usrdemo/path/ t# ls file.txt t# df . Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad4s1a507630 99704 36731621%/ We find it now sitting as a directory the / root partition! In Michael's case it would be sitting on the old /usr partition. Definitely not what we wanted. So what has happened is that the mv * command with Michael's usr directory actually overwrote the current /usr directory with the contents of the tar archive. Seems like a no-op but there could be symbolic link issues, i.e. /usr/home -> /home. I hope that is semi-coherent. What you probably want to do to replace a /usr partition is something like this: cd / mkdir user mount -t ufs /dev/da2s1d /user cd /usr pax -rw -pe . /user pax is like tar. -rw means to read (r) from the source (.) and write (w) to the destination (/user). -pe means to preserve everything (permissions, ownership etc). Having done that, you now have a duplicate usr directory structure "under" /user i.e. /user/bin /user/lib and so on. Now you can switch the fstab entries like you planned, reboot, and you should have replaced /usr with the new drive. Hope this helps, although you may have some issues in the future due to any unintended consequences of the tar/mv command combination. Vinny ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Configuring mailman with web server different from mail server
Hi, I am trying to install mailman from the ports. I have different machine for the mail server and the web server and I am trying to figure if this configuration is workable. The MTA is sendmail, where could I find configure example? Best regards, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
New Zealand DST updates
Good afternoon - New Zealand is changing when it goes on and off daylight savings time this year. I have diffs to /usr/src/share/zoneinfo/australasia for FreeBSD 6.2 which take this change into account. To whom should I send this information so that it makes it into the source tree for this and future releases? Cheers, Brent -- J. Brent Jones, Manager, Technology Services University of Otago, School of Business Dunedin NEW ZEALAND Phone: +64 3 479 8042 http://www.otago.ac.nz/business ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
isc-dhcp3-server issues with windows 2000 client
Hello, I tried posting under a similar topic, but not sure if it went through. I'm new on this list, but not a total newbie. I have upgraded a system from p6 to p7. Everything seems to be working on wtih the upgraded system except for dhcp. I have a backup of the old system and am using that to trouble shoot. I have narrowed it down to the dhcpd binary. If I put in the newer binary built with p7 it does not work with windows 2000. If I put in the old binary it works fine. Old Binary ( tcpdump ): IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:19:d1:df:f3:07, length: 317 IP sss.sss.sss.sss.67 > ppp.ppp.ppp.ppp.68: BOOTP/DHCP, Reply, length: 300 New Binary ( tcpdump ): [ windows 2000 ] : IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:19:d1:df:f3:07, length: 300 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from aa:aa:aa:aa:aa:aa, length: 300 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from aa:aa:aa:aa:aa:aa, length: 300 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from aa:aa:aa:aa:aa:aa, length: 300 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from aa:aa:aa:aa:aa:aa, length: 300 No reply is ever sent out [ win xp - renewal ] IP xxx.xxx.xxx.yyy.68 > xxx.xxx.xxx.zzz.67: BOOTP/DHCP, Request from 00:11:d8:13:0e:69 , length: 302 IP xxx.xxx.xxx.zzz.67 > xxx.xxx.xxx.yyy.68: BOOTP/DHCP, Reply, length: 300 FreeBSD clients seem to be able to obtain a new address with no problem. My question is how do I trouble shoot the two binaries? What tools can I use? How do I get dhcpd to actually put out debugging info to the syslogs or on the command line? I've tried the -d and got nothing. any help is much appreciated. Thanks, Joe - Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr - Fixed
I was able to rectify the problem by removing /home, which was a link and was pointing to /usr/home and then recreating it as a directory. Thanks everyone for their suggestions, Michael --- Vinny <[EMAIL PROTECTED]> wrote: > Michael S wrote: > > I reverted to the old /usr. > > What I had done: > > Initially I set up the newly installed drive (da2) > > to have only one partition (da2s1d) which I chose > to > > be /user (note the e). > > I tarred /usr to a file in /user > > tar -cf /user/usr.tar /tar > > > > and extracted the file > > tar -xf usr.tar > > I had the whole structure of /usr underneath > /user/usr > > > > And then > > cd usr > > mv * .. > > > > to have everything under /user > > > > After thinking about that mv command, I have come to > the > conclusion that /dev/da2s1d does not in fact contain > a /usr directory structure and if mounted will be > empty. Why? > > Note /dev/ad8s1e is an empty partition (a new disk, > if you will on my system that I will in this > demonstration). > > Also, I'll use user and usrdemo as the names of the > user and usr > directories that Michael is using, respectively. I > don't want > to overwrite my own usr directory needlessly. > > Observe: > > Create a mount point and mount the disk > t# cd / > t# mkdir user > t# mount -t ufs /dev/ad8s1e /user > > t# pwd > /user > t# mkdir -p usrdemo/path > > Check our partition (there is a dot (.)after the df > command, > look closely): > > t# df . > Filesystem 1K-blocks Used Avail Capacity Mounted > on > /dev/ad8s1e5076306 467014 0%/user > > Create a file for no reason. > > t# touch usrdemo/path/file.txt > t# cd / > t# ls -laR /user > total 6 > drwxrwxrwt 3 root wheel 512 Aug 20 22:05 . > drwxr-xr-x 26 root wheel 1024 Aug 20 21:59 .. > drwxr-xr-x 3 root wheel 512 Aug 20 22:05 > usrdemo > > /user/usrdemo: > total 6 > drwxr-xr-x 3 root wheel 512 Aug 20 22:05 . > drwxrwxrwt 3 root wheel 512 Aug 20 22:05 .. > drwxr-xr-x 2 root wheel 512 Aug 20 22:05 path > > /user/usrdemo/path: > total 4 > drwxr-xr-x 2 root wheel 512 Aug 20 22:05 . > drwxr-xr-x 3 root wheel 512 Aug 20 22:05 .. > -rw-r--r-- 1 root wheel0 Aug 20 22:05 file.txt > t# cd /user > > Let's look at what file system we're on again: > > t# df . > Filesystem 1K-blocks Used Avail Capacity Mounted > on > /dev/ad8s1e5076306 467014 0%/user > > Still on the new drive. > > Now that we're in the /user directory let us try, as > Michael > says "to have everything under /user". Right idea, > but mv is not > the tool in this case: The next command causes much > trouble: > > t# mv * .. > > will in fact move the contents of /user to the > parent directory > which is in fact /, the root of the file system. > > There is nothing left in /user: > t# pwd > /user > > t# ls -la > total 4 > drwxrwxrwt 2 root wheel 512 Aug 20 22:06 . > drwxr-xr-x 27 root wheel 512 Aug 20 22:06 .. > > If we change directory to the .. directory target > (the same target as > the mv command) we'll see the usrdemo directory. > > t# cd .. > t# ls > .cshrc compat lib proc >usb > .profiledev libexec > rescue usr > .snap distmedia root >usrdemo > COPYRIGHT dvdrom mnd sbin >var > bin entropy mnt sdvd > bootetc usersys > cdrom homeportabletmp > > If we change to it and check our file system: > > t# cd usrdemo/path/ > t# ls > file.txt > t# df . > Filesystem 1K-blocks Used Avail Capacity Mounted > on > /dev/ad4s1a507630 99704 36731621%/ > > We find it now sitting as a directory the / root > partition! > In Michael's case it would be sitting on the old > /usr > partition. Definitely not what we wanted. > > So what has happened is that the mv * command with > Michael's > usr directory actually overwrote the current /usr > directory > with the contents of the tar archive. Seems like a > no-op but > there could be symbolic link issues, i.e. /usr/home > -> /home. > > I hope that is semi-coherent. > > What you probably want to do to replace a /usr > partition is > something like this: > > cd / > mkdir user > mount -t ufs /dev/da2s1d /user > cd /usr > pax -rw -pe . /user > > pax is like tar. -rw means to read (r) from the > source (.) > and write (w) to the destination (/user). -pe means > to > preserve everything (permissions, ownership etc). > > Having done that, you now have a duplicate usr > directory > structure "under" /user i.e. /user/bin /user/lib and > so on. > > Now you can switch the fstab entries like you > planned, > reboot, and you should have replaced /usr with the > new drive. > > Hope this helps, although you may have some issues > in the future due to any unintended consequences > of the tar/mv command combination. > > V
Re: isc-dhcp3-server issues with windows 2000 client
Hi, >I have a backup of the old system and am using that to trouble >shoot. I have narrowed it down to the dhcpd binary. If I put in >the newer binary built with p7 it does not work with windows >2000. If I put in the old binary it works fine. First question would be: how did you build isc-dhcp? pkg_info |grep dhcp Second, is it running? How do you start it? Third question: was are the version number of old and new dhcp? You may be facing some change in dhcpd configuration file. Best regards, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
Michael, firstly let me quote the head of your original message, just so I/we don't get too confused, especially by all the gratuitous re-quoting of subsequent 'relative irrelevancies' like your dmesg .. >I am trying to migrate my /usr to a newly installed >SCSI drive. Up until yesterday I had /, /var, /usr on >a 5 Gig drive and my /home was on another 60 Gig >drive, which was fine because it had no GUI and >functioned mostly as a server. Ok, so /home was its own drive, one slice. This would suggest that you didn't have /home as a soft link in / but you should check 'ls -la /' to be sure that's the case, ie that a link hasn't crept in somehow. If one has, delete it. Also check that your 'old' /usr dir has no link to /home lying around, which might account for some of this oddness, especially since your tar and (I'd consider potentially hairy) 'mv * ..' >Last night I added a third drive, with a capacity >around 18G; since my other two drives are hard-wired >in /boot/device.hints, there were no problems with >device numbering. I wrote down the device name >(/dev/da2) and proceeded to sysinstall to first create >a FreeBSD partition and then the only slice within >that partition. I named it /user. And you intended to leave /home on the 60G drive? Its not clear what you intended to put on the new /user, or was it just an intermediary? I think I may have called it '/fred' till the process was finished, but never mind .. back to the more recent, with formatting touched up a tad: On Mon, 20 Aug 2007 19:28:51 -0400 (EDT) Michael S <[EMAIL PROTECTED]> wrote: > Here's df -k output: > > Filesystem 1K-blocks UsedAvail Capacity > Mounted on > /dev/da0s1a50763085046 38197418%/ > devfs 110 100%/dev > /dev/da0s1e495726 10 456058 0%/tmp > /dev/da0s1f 3733038 2869704 56469284%/user > /dev/da0s1d495726 110700 34536824%/var So that /user is your old /usr, right? Do an 'ls -la /user' and check its contents are the same as your new /usr below. Also 'du -d1 /user' should look like 'du -d1 /usr'. Neither should contain a link to /home > /dev/da1s1d 68431992 27948332 3500910244%/usr/home > /dev/da2s1d 17213408 2882922 1295341418%/usr This looks confused. I think you want /home (not /usr/home) to be your 60G da1s1d, don't you? As is, the mountpoint is on the 17G da2s1d, which would a) actually need to be mounted first, and b) contain a /usr/home dir to mount it on. Better would be to mkdir /home, and mount it directly on there. > When I go back to the old /usr by editing fstab: > /dev/da0s1b noneswapsw0 0 > /dev/da1s1b noneswapsw0 0 > /dev/da0s1a / ufs rw1 1 > /dev/da0s1e /tmpufs rw2 2 > /dev/da0s1f /usrufs rw2 2 > /dev/da0s1d /varufs rw2 2 > /dev/da1s1d /home ufs rw2 2 > /dev/da2s1d /user ufs rw2 2 > /dev/acd0 /cdrom cd9660 ro,noauto 0 > > I get into my home directory with no problem. Right, so you do have a /home directory, not a link there? Use ls -la to confirm contents of /, /home and /usr (and /usr/home, if present), with either the old or the new setup, which might help point out where this confusion is occuring, especially if there are any links involved. Also, the realpath command can be useful to discombobulate any links, ie 'cd ~michael ; realpath .' > --- Jerry McAllister <[EMAIL PROTECTED]> wrote: > > > On Mon, Aug 20, 2007 at 06:52:12PM -0400, Michael S > > wrote: > > > > > I tried the earlier suggested dump/restore: > > > %cd /user > > > %dump -L -f - /usr | restore -r -f - > > > > > > When I log-in over ssh I get: > > > Could not chdir to home directory /home/michael: > > No > > > such file or directory. > > > > Well, is there a directory named/home/michael > > > > It looks like there is a file system mounted as > > /home. > > I am guessing that has not changed. But, it is > > telling you > > that it cannot find that directory. Are there some > > links > > messing you up? > > > > What does 'df -k' show? > > > > jerry I'll leave it there, trying to keep the re-quoting level down, but Jerry and I seem to be on the same page, if reading it in a different order :) Cheers, Ian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Configuring mailman with web server different from mail server
Olivier sure I do this - configure sendmail on the mailman machine as per instuctions for the list and 'smartrelay' the mail via mailserver on the web machine. On the mailserver also make sure all the aliases for the list point at the webserver. -- Martin On 8/21/07, Olivier Nicole <[EMAIL PROTECTED]> wrote: > > Hi, > > I am trying to install mailman from the ports. > > I have different machine for the mail server and the web server and I > am trying to figure if this configuration is workable. > > The MTA is sendmail, where could I find configure example? > > Best regards, > > Olivier > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > [EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
portupgrade and make options
Good day all, I was wondering how to pass options from portupgrade to make. Say I wanted use -j4 for max. number of jobs. Where should I specify that? When building "world" it's possible to be done from the command line: make -j4 buildworld. Also is athlon the correct CPUTYPE for AMD Sempron 3400? Thanks in advance, Michael ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to move /usr
On Tue, 21 Aug 2007, Michael S wrote: > Thanks for your help Ian, > I got it fixed. Had to remove /home and recreate it > once again. Good to hear, Michael! > --- Ian Smith <[EMAIL PROTECTED]> wrote: [blah] Cheers, Ian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: portupgrade and make options
On Tue, Aug 21, 2007 at 02:23:21AM -0400, Michael S wrote: > Good day all, > > I was wondering how to pass options from portupgrade > to make. Say I wanted use -j4 for max. number of jobs. > Where should I specify that? When building "world" > it's possible to be done from the command line: make > -j4 buildworld. > > Also is athlon the correct CPUTYPE for AMD Sempron > 3400? > > Thanks in advance, > Michael >From portupgrade(1) manpage: -m --make-argsSpecify arguments to append to each make(1) com- mand line. -M --make-env Specify arguments to prepend to each make(1) com- mand line. Also check /usr/local/etc/pkgtools.conf for MAKE_* hashes. HTH, Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"