Hi,
Sorry for my english
I have problem with Intel® Server Board SE7520BD2SCSI.
http://www.intel.com/design/servers/boards/se7520bd2/index.htm
Two Ultra320/LVD channels via the LSI Logic 53C1030 SCSI controller and
connected via two internal 68-pin-wide connectors; maximum data transfer 320
MB/sec on each Ultra320/LVD controller, supporting RAID 0 and 1, and support
for modular ROMB (Intel RAID Controller SRCZCRX)
SCSI disks works terribly.
They copy 3mb/s.
Does the disks are in RAID or single they works terribly.
I try other SCSI controler on PCI, but the problem the same.
I try different OS, like freebsd i386 4.11, 5.3, amd64 5.3(it suports E7520
chipset), NetBSD 2.0, only windows 2003 works fine.
Intel mainboard CD have drivers for Windows, UnixWare, SUSE, Red Hat,
NetWare.
Do you have any suggestions? any ideas ?
Here is server
SE7520BD2SCSI INTEL (BRANDON SCSI) SERVER BOARD OEM
BX80546KG3000EA INTEL XEON 3.0GHZ 800FSB 1M BOX, ACTIVE
KVR333X72RC25/512 512MB 333MHZ DDR ECC REGISTERED CL2.5 DIMM
ST373207LW SEAGATE CHEETAH 10K.7 73GB U320SCA 68-PIN
SC5275E INTEL SERVER CHASSIS SC5275E
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RC1 #0: Sun Oct 17 01:25:37 UTC 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table:
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff
Hyperthreading: 2 logical CPUs
real memory = 1073610752 (1023 MB)
avail memory = 1041047552 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 irqs 0-23 on motherboard
ioapic1 irqs 24-47 on motherboard
ioapic2 irqs 48-71 on motherboard
npx0: [FAST]
npx0: on motherboard
npx0: INT 16 interface
acpi0: on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: on acpi0
cpu1: on acpi0
cpu2: on acpi0
cpu3: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pci0: at device 0.1 (no driver attached)
pci0: at device 1.0 (no driver attached)
pcib1: irq 16 at device 2.0 on pci0
pci1: on pcib1
pcib2: at device 0.0 on pci1
pci2: on pcib2
mpt0: port 0xc400-0xc4ff mem
0xfceb-0xfceb,0xfcec-0xfcec irq 26 at device 5.0 o
n pci2
mpt0: [GIANT-LOCKED]
mpt1: port 0xc800-0xc8ff mem
0xfcee-0xfcee,0xfcef-0xfcef irq 25 at device 5.1 o
n pci2
mpt1: [GIANT-LOCKED]
pci1: at device 0.1 (no driver
attached)
pcib3: at device 0.2 on pci1
pci3: on pcib3
pci1: at device 0.3 (no driver
attached)
pcib4: irq 16 at device 4.0 on pci0
pci4: on pcib4
pcib5: irq 16 at device 5.0 on pci0
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.EPB1 -
AE_NOT_FOUND
pci5: on pcib5
pci5: at device 0.0 (no driver attached)
pcib6: irq 16 at device 6.0 on pci0
pci6: on pcib6
pcib7: at device 30.0 on pci0
pci7: on pcib7
em0: port
0xec00-0xec3f mem 0xfebe-0xfebf irq 16 at device 4.
0 on pci7
em0: Ethernet address: 00:0e:0c:4e:e3:f8
em0: Speed:N/A Duplex:N/A
pci7: at device 12.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: at device 31.3 (no driver attached)
acpi_button0: on acpi0
acpi_button1: on acpi0
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
orm0: at iomem
0xcf800-0xd07ff,0xce800-0xcf7ff,0xca800-0xce7ff,0xc-0xca7ff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM at ata0-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
da0 at mpt1 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 139756MB (286220288 512 byte sectors: 255H 63S/T 17816C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a
___
freebsd-question
