Looking for commercial Antivir / Antispam for latest freebsd
Hi all, I am writing this email for asking if someone can suggest a good commercial product for antivir/antispam that supports the latest FreeBSD release (8.x and 9.x) . Actually we are using BitDefender but it refuses to install in newer release due some compatibility problem with compatx ports. I have tried to check on the net but the search engines give me back only outdated results, products not compatible anymore or linux only based. Some focus points: - It must work on FreeBSD 8.x or newer (better if amd64 too). - It should work as milter interface in sendmail base system. - It should have (but it is not mandatory) a web interface where the admin / users check the results of the activity or the service status. Thanks very much for your tips / inputs / suggestions :-) P.s. I am happily using clamav too and it works great, but my company need also a commercial solution. Best Regards, Gianmarco Giovannelli , Unix expert since yesterday http://utenti.gufi.org/~gmarco/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: LTmodem port
At 16.55 20/06/2003 -0400, Dr. Richard E. Hawkins wrote: On Fri, Jun 20, 2003 at 01:27:13PM -0700, anonymous wrote: I recently installed FreeBSD 4.8 and I have a Lucent WinModem. Are there any detailed instructions on installing the LTModem port for FreeBSD? They aren't needed; it should just work. Mine doesn't work even if the port. Even I kldload a freshly build port it doesn't see it. It is a minipci combo card (wifi + modem) from Fujitsu. The modem part is seen by windows like Lucent Tecnologies soft modem AMR. If someone want to give a try on it I can send the pciconf output. Thanks... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
adsl pci cards
Hi, I'd like to make an adsl router using an epia mb with an adsl pci card (if possible:-). I have found the sangoma card: http://www.sangoma.com/adsl.htm Just a few questions: 1) Will they work here in Europe (Italy) ? 2) What type of software have I to use with it ? I see the card arrive with his soft WANPIPE. May it use the standard BSD commands and programs to use/manage it (like mpd/ppp/ipfw and so on ... ) ? 3) Is there any other alternative to this card ? Also something cheaper if possible :-) In Italy any small adsl router cost less than this card ... Any other relevant infos on the subj is welcome :-) Best Regards, Gianmarco Giovannelli , Unix expert since yesterday http://www.gufi.org/~gmarco ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPPoE not working
At 05/04/2003, you wrote: I have a weird problem here with PPPoE, I had it working with this configuration before I bought a belkin router: . set device PPPoE:fpx0: -- I also tried without this colon. .fxp0: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500 . fxp0 vs fpx0 ... the line in ppp.conf is wrong. Best Regards, Gianmarco Giovannelli , Unix expert since yesterday http://www.gufi.org/~gmarco ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: squid and ipfw ... fwd ...
At 14/02/2003, P. U. Kruppa wrote:
On Thu, 13 Feb 2003, Dancho Penev wrote:
On Thu, Feb 13, 2003 at 06:44:24PM +0100, P. U. Kruppa wrote:
Date: Thu, 13 Feb 2003 18:44:24 +0100 (CET)
From: [EMAIL PROTECTED] (P. U. Kruppa)
To: [EMAIL PROTECTED]
Subject: squid and ipfw ... fwd ...
Hi!
I am trying to setup a transparent proxy with Squid.
This should work, squid on port 3128 on the gateway of the intranet.
# Transparent Proxy -- ipfw (before divert rules)
${ipfwcmd} 0045 pass tcp from ${MY_EXTERNAL_IP} to any 80
${ipfwcmd} 0049 fwd 127.0.0.1,3128 tcp from any to any 80
-- minimal squid.conf
http_port 3128
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
cache_dir null /tmp
cache_access_log /usr/local/squid/logs/access.log
cache_log /usr/local/squid/logs/cache.log
ftp_user squid@
ftp_passive off
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
acl yournet src ${YOUR_NET_CLASS}
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow ${YOUR_NET_CLASS}
http_access deny all
Please let me know...
Best Regards,
Gianmarco Giovannelli , Unix expert since yesterday
http://www.gufi.org/~gmarco
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
